S E M SDIG-X1909 RUGGED SPORT WATER BOTTLE User Manual X 1909 ENG IM QS V2 160113 lab

S.E.M. INDUSTRIES RUGGED SPORT WATER BOTTLE X 1909 ENG IM QS V2 160113 lab

User manual

Download: S E M SDIG-X1909 RUGGED SPORT WATER BOTTLE User Manual X 1909 ENG IM QS V2 160113 lab
Mirror Download [FCC.gov]S E M SDIG-X1909 RUGGED SPORT WATER BOTTLE User Manual X 1909 ENG IM QS V2 160113 lab
Document ID2879064
Application IDfhtjF7u8NvqpzQbTFgB9Uw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize18.11kB (226384 bits)
Date Submitted2016-01-20 00:00:00
Date Available2016-01-20 00:00:00
Creation Date2016-01-13 08:07:53
Producing SoftwareCorel PDF Engine Version 3.0.0.739
Document Lastmod2016-01-13 08:07:53
Document TitleX-1909_ENG IM_QS_V2-160113-lab
Document CreatorCorelDRAW
Document Author: NEWGMA

IM: X-1909 (EN)
SIZE: 65 (W) X 65 (H) MM (EACH PAGE)
MATERIAL: 120G WOODFREE PAPER
PRINTING COLOR: BLACK + PANTONE 187C
FRONT
Spritz has 2 available Apps, which you can
download for Apple (iOS) and Android devices:
2. SDIGITAL MUSIC
PLAYER APP
VOL
ON!
AC
/ NEXT SONG
Press quickly for next song, press
and hold to increase volume.
(Hold 3 sec.)
Insert Mirco SD Card
BT "ON" !
To play MP3 Song files,
insert your Micro-SD Card.
USB
1. SPRITZ HYDRATION
ASSISTANT APP
POWER ON / OFF
THE CONNECTED SPORTS WATER BOTTLE
Reminds you to drink regularly
with your choice of AUDIO
notifications
X-1909
QUICK START
Real-Time Studio Enhancement
of your music while streaming
over Bluetooth
BOTH APPS ARE AVAILABLE AT:
VOL
/ PERVIOUS SONG
Press quickly for last song,
press and hold to decrease
volume.
BLUETOOTH
LED INDICATOR
Use a computer USB port / power adapter to recharge the speaker.
It will take 3 hours to fully charge the speaker.
(SLOW)
When music playing, press the button
to pause and play.
EN-3
Use a computer USB port / power
adapter to recharge speaker.
* SEE SYSTEM
RESET SECTION
EN-4
CHARGING
GREEN LED
(ON)
...
SEARCHING
PAIRING
“SDIG SPRITZ”
(CODE: 0000)
CONNECTED
(FAST)
USB charge Socket
PLAY / PAUSE
EN-2
LED indicator /
System Reset Hole *
Power on: Blue LED light flashes
quickly.
Bluetooth® Paired: Blue LED light
flashes slowly.
Charge Status: Green LED light on.
USB
Press and hold for 3-5 second to
Power-Up the speaker,
press and hold 3-5second again
to switch off speaker.
Press quickly for mode switching.
USB
APP
DOWNLOADS
In order to avoid interferences, please de-activate Wi-Fi on your device
(smartphone, tablet, etc.) when playing music using Bluetooth®
EN-5
EN-6
BACK
Micro SD-MP3
Changing Colors
Product No.: ............................. X-1909 SPRITZ
Product description: .................. Rugged Sport Water Bottle
Power Supply : ............... Rechargeable Lithium 3.7V/ 1000mAh X 1 PC. (Built-in)
Recharge Power : .......... DC 5V - - - , 500mA
Speaker : ....................... 2"x1
Micro SD Card Music
Insert Micro SD card with MP3 music files
into the Micro SD slot, press and hold
the “Power” button to turn on speaker,
when speaker voices out
"Micro SD Detected”, speaker will be in
the “Micro SD card music playback mode”.
Wireless Range (BT) : .................... 10M (30 Ft.)
Max. BT Pairing Memory : ............... 4 Devices
System Reset*
Micro
SD
card
Micro SD-MP3
Exit Micro SD Card Music
Playing Mode
Short press Power button for mode
shifting or pull out the Micro SD card,
to exit Micro SD card playing mode,
Short Press
and shift to Bluetooth® mode.
EN-7
for Mode Switch
EN-8
SPRITZ has an internal protection system
which automatically activates if anything
abnormal occurs (eg. Static electricity!)
In such a case, SPRITZ may appear to be
"LOCKED" and not operating.
To resolve this, simply "RESET" SPRITZ by
inserting a paper clip wire gently into the
system reset hole (same as LED indicator
hole) on the left side of the USB charge
socket. Keep the "RESET" button (INSIDE)
pressed for 2 seconds & then Power-On as
usual.
EN-9
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
TO ASSURE THE FINEST PERFORMANCE,
PLEASE READ THIS MANUAL CAREFULLY.
KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE.
PLEASE NOTE: YOU WILL FIND THE RATING LABEL FOR
THIS PRODUCT LOCATED ON THE BOTTOM OF THE UNIT.
CAUTION : DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
BATTERY REPLACEMENT MUST ONLY BE DONE BY A QUALIFIED
PROFESSIONAL TECHNICIAN.
- KEEP MINIMUM DISTANCES (5cm) AROUND THE APPARATUS FOR SUFFICIENT
VENTILATION.
- THE VENTILATION SHOULD NOT BE IMPEDED BY COVERING THE VENTILATION
OPENINGS WITH ITEMS SUCH AS NEWSPAPER, TABLE-CLOTHS, CURTAINS ETC.
- NO NAKED FLAME SOURCE SUCH AS LIGHTED CANDLES SHOULD BE PLACED
ON THE APPARATUS.
- ATTENTION SHOULD BE DRAWN TO THE ENVIRONMENTAL ASPECTS OF BATTERY
DISPOSAL.
- BATTERY SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE,
FIRE OR THE LIKE.
CAUTION REGARDING THE WATERPROOFING
ALTHOUGH THIS UNIT'S SPLASH-PROOF DESIGN ALLOWS IT
TO BE USED EVEN WHERE IT MAY BE EXPOSED TO A CERTAIN
AMOUNT OF RAIN, SNOW, OR WATER SPRAY, YOU SHOULD
NOTE AND OBSERVE THE FOLLOWING POINTS.
IPX4
- Do not allow large amounts of water to contact this unit.
WATER PROOF RATING - Do not immerse or place this unit in water.
It may malfunction if it falls into water.
- If water droplets adhere to this unit, use a dry cloth to wipe
them off as soon as possible. If this unit is exposed to a large
amount of water, do not turn on the power immediately. Instead,
let this unit dry out for at least one day in a dry location before
you turn on the power.
- When using this unit in a wet or high-humidity location,
please make sure the Rubber Terminal Cover is properly closed.
DO NOT IMMERSE
EN-10
THE DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CHANGES OR
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE PRODUCT.
NOTE: THIS PRODUCT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR
A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS
ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL
INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS PRODUCT GENERATES, USES AND
CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO
RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE
WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THE PRODUCT DOES CAUSE
HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE
DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO
TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING
MEASURES : -REORIENT OR RELOCATE THE RECEIVING ANTENNA. -INCREASE THE
SEPARATION BETWEEN THE PRODUCT AND RECEIVER.
-CONNECT THE PRODUCT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO
WHICH THE RECEIVER IS CONNECTED. -CONSULT THE DEALER OR AN
EXPERIENCED RADIO/TV TECHNICIAN FOR HELP.
Technical specifications and design may change without notice.
EN-11
IM-SPRITZ-WORKOUT-X1909-4-S01-001
IM-SPRITZ-MARATHON-X1909-64-S01-001
BRAND:
E: sales@sem.com.hk
T: (852) 3761 8000
W: www.sem.com.hk
MODEL: X-1909
SC NO.: 0076/15
DATE: 06 JAN., 2016
JOB NO.: 00615-0038
FILE:
MANUAL FOR REFERENCE

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Page Count                      : 1
Create Date                     : D:20160113080753
Modify Date                     : D:20160113080753
Producer                        : Corel PDF Engine Version 3.0.0.739
Author                          : NEWGMA
Creator                         : CorelDRAW
Title                           : X-1909_ENG IM_QS_V2-160113-lab
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AANA-SDIG-X1909

Navigation menu