S E M SEM-SP3000 Mini Speaker System User Manual SP 3000 BTHF S04 FCC ENGLISH IM V3 141104

Download:
Mirror Download [FCC.gov]
Document ID	2505366
Application ID	autdEhLtItExLKP484kU9Q==
Document Description	User manual_2AANA-SEM-SP3000
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.99kB (187370 bits)
Date Submitted	2015-01-18 00:00:00
Date Available	2015-01-20 00:00:00
Creation Date	2014-12-08 08:13:04
Producing Software	Corel PDF Engine Version 3.0.0.739
Document Lastmod	2014-12-08 08:13:04
Document Title	SP-3000-BTHF-S04 (FCC)_ENGLISH IM_V3-141104
Document Creator	CorelDRAW
Document Author:	NEWGMA

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
OPERATING INSTRUCTIONS
The lightning flash
and arrowhead
within the triangle
is a warning
sign alerting you of
"dangerous voltage"
inside the product.
WAR NI NG : To r e d u c e
the risk of electric shock, do
not remove cover (or back).
No user-serviceable
parts inside. Refer
servicing to qualified
service personnel.
T he excl am at i on
poi nt w i t hi n t he
triangle is a warning
sign alerting you of
important instructions
accompanying
the
product.
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS.
NOTE: CAUTION SYMBOLS ARE PRINTED ON REAR OF UNIT.
PLEASE REFER TO INSTRUCTION MANUAL.
CAUTION
PLEASE NOTE: YOU WILL FIND THE
RATING LABEL FOR THIS PRODUCT
LOCATED ON THE REAR OF THE UNIT.
DO NOT EXPOSE TO DRIPPING
OR SPLASHING LIQUIDS!
THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND
NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE APPARATUS.
THE MARKING AND RATING LABEL IS LOCATED AT REAR ENCLOSURE OF THE APPARATUS.
UNDER THE INFLUENCE OF ELECTROSTATIC PHENOMENON,
THE PRODUCT MAY MALFUNCTION AND USER TO POWER RESET.
BATTERY SHOULD NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
High Power Mini Speaker System
MODEL : SP-3000-BTHF
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the product.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This product generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If the product does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures
: -Reorient or relocate the receiving antenna. -Increase the separation between the product and receiver. Connect the product into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
E-2
TOP VIEW:
FRONT VIEW:
BLUETOOTH® WIRELESS PLAYBACK
BACK VIEW:
10
11
12
14
15
13
LOCATION OF CONTROLS
1.
2.
3.
4.
5.
6.
7.
VOLUME DOWN KEY
VOLUME UP KEY
BASS KEY
BACK KEY
NEXT KEY
SOURCE KEY
PAIR/ PLAY/ PAUSE/
HANDS FREE KEY
8. ON/ STANDBY/ CALL REJECT KEY
9. SPEAKER
10. LED INDICATOR
11. AUX IN SOCKET
12. CHARGING LED INDICATOR
13. MICRO USB CHARGING SOCKET
14. MICROPHONE (FOR HANDS FREE)
15. BATTERY COMPARTMENT
SPEAKER CHARGING
FOR BEST RESULTS, FULLY CHARGE YOUR SPEAKER SYSTEM BEFORE USE.
THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUETOOTH® DEVICE
WITHIN 30 FEET. SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK
AND CONTROL FROM YOUR BLUETOOTH® DEVICE.
PREPARE THE UNIT:
- PRESS AND HOLD THE ON/STANDBY KEY ABOUT 2 SECONDS TO TURN THE UNIT ON.
- THE LED INDICATOR WILL FLASH TO INDICATE THE UNIT IS ON AND WAITING FOR PARING.
- THE LED INDICATOR WILL REMAIN LIT ON WHEN PAIRED.
*NOTE ONLY ONE DEVICE CAN BE PAIRED AT ANY GIVEN TIME.
PREPARE YOUR PHONE OR OTHER BLUETOOTH® DEVICE:
- TURN ON THE BLUETOOTH® FUNCTION, THIS IS USUALLY FOUND UNDER GENERAL
SETTINGS OR OPTIONS.
*PLEASE REFER TO YOUR DEVICE’S MANUAL FOR FURTHER BLUETOOTH® DETAILS.
MAKE THE CONNECTION:
- GO TO YOUR DEVICE’S BLUETOOTH® SETTINGS
- ADD OR SEARCH FOR DEVICES
- IF ASKED FOR A PASS CODE, ENTER “0000”
*THIS IS A ONE-TIME EVENT PER DEVICE. TO PAIR YOUR UNIT TO ANOTHER DEVICE,
REPEAT THE ABOVE PREPARATION AND CONNECTION STEPS.
DISABLING THE CONNECTION TO UNPAIR A BLUETOOTH® DEVICE THAT IS ALREADY PAIRED,
PRESS AND HOLD THE PAIR KEY FOR A FEW SECONDS.
VOLUME CONTROL:
INCREASE AND DECREASE VOLUME USING THE VOLUME UP AND VOLUME DOWN KEYS ON
THE UNIT OR USING THE VOLUME CONTROLS ON YOUR BLUETOOTH® ENABLED DEVICE.
*NOTE THAT IF THERE IS NO PLAYBACK, ENSURE THAT NEITHER THE UNIT NOR YOUR
BLUETOOTH® DEVICE ARE SET TO ZERO VOLUME AND THE CORRECT DEVICE FOR
PLAYBACK IS PAIRED.
SPEAKER OPERATION
- PRESS THE PLAY/PAUSE KEY
TO START PLAYBACK.
- AT ANYTIME DURING PLAYBACK, PRESS THE PLAY/PAUSE KEY
TO PAUSE
OPERATION. PRESS AGAIN TO RESUME OPERATION AT THE SAME TRACK & POSITION.
- AT ANYTIME DURING PLAYBACK, “PRESS AND RELEASE” THE NEXT OR BACK KEY :
OR
TO SKIP BACKWARDS OR FORWARDS BY ONE TRACK, AS DESIRED.
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
USB 5V
THE CHARGING LED INDICATOR WILL TURN RED TO INDICATE IT IS IN CHARGING MODE.
WHEN THE UNIT IS FULLY CHARGED, THE CHARGING LED INDICATOR WILL AUTOMATICALLY
SWITCH OFF.
SPECIFICATIONS
POWER SUPPLY : RECHARGEABLE LITHIUM BATTERY 3.7V
RECHARGE POWER: USB DC 5V, 700mA
1000mAh x 1PC
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS A MP3
PLAYER TO THIS UNIT, TO LISTEN TO THE SOUND OF THAT DEVICE THROUGH
THE HIGH QUALITY AMPLIFIER OF THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE PLEASE USE A STANDARD STEREO HEADPHONE
(3.5MM TO 3.5MM PLUGS) CABLE TO CONNECT THE "HEADPHONE-OUT OR AUDIO
LINE-OUT" OF THE DEVICE TO THE AUX-INPUT SOCKET OF THIS UNIT.
- SELECT THE FUNCTION TO "AUX IN" BY PRESSING THE SOURCE KEY ONCE.
- SWITCH ON THE EXTERNAL DEVICE (eg. MP3-PLAYER).
- START PLAYBACK OF THE EXTERNAL DEVICE AND ADJUST THE VOLUME CONTROL
OF THE UNIT TO THE DESIRED LEVEL.
- REMEMBER TO SWITCH OFF THE UNIT AND THE EXTERNAL DEVICE WHEN YOU ARE
FINISHED USING THE EXTERNAL DEVICE.
- SWITCH BACK TO BLUETOOTH® MODE ANYTIME BY PRESSING THE SOURCE KEY AGAIN.
HANDS-FREE OPERATION
- THE UNIT INCLUDES A VERY USEFUL HANDS-FREE FUNCTION WHICH ENABLES YOU
TO USE IT AS A SPEAKER PHONE.
- MAKE SURE THE UNIT IS ON AND PAIRED WITH YOUR PHONE DEVICE AS DESCRIBED.
TO RECEIVE A CALL: PRESS THE HANDS-FREE KEY (7) ONCE.
TO END A CALL: PRESS THE HANDS-FREE KEY (7) AGAIN WHEN THE CALL IS FINISHED.
TO REJECT A CALL: PRESS THE ON/ STANDBY/ CALL REJECT KEY (8).
E-3
E-4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Create Date                     : D:20141208081304
Modify Date                     : D:20141208081304
Producer                        : Corel PDF Engine Version 3.0.0.739
Author                          : NEWGMA
Creator                         : CorelDRAW
Title                           : SP-3000-BTHF-S04 (FCC)_ENGLISH IM_V3-141104

EXIF Metadata provided by EXIF.tools