S E M SEM-TT9311 Bluetooth Turntable User Manual

S.E.M. INDUSTRIES Bluetooth Turntable TT 9311 BTM3EJ S01 ENGLISH FCC V1 160505

a href="https://usermanual.wiki/S-E-M" itemprop="url"> S E M >

User manual

OPERATING INSTRUCTIONSLEATHERETTE BRIEFCASE TURNTABLEMODEL : TT-9311-BTM3EJMP3DIGITAL PLAYBACKUSBFLASH MEMORYMP3 PLAYBACKE-2WARNING:- TO PERVENT FIRE OR SHOCK HAZARD,DO NTO EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.- TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.IMPORTANT SAFETY INSTRUCTIONS1.READ INSTRUCTIONS-AII THE SAFETY AND OPERATING INSTRUCTIONS SHOULD BE READ BEFORE THE APPLIANCE IS OPERATED.2.RETAIN INSTRUCTIONS-THE SAFETY AND OPERATING INSTRUCTIONS SHOULD BE RETAINED FOR FUTURE REFERENCE. 3.HEED WARNIGS-ALL WARNINGS ON THE APPLIANCE AND IN THE OPERATING INSTRUCTIONS SHOULD BE ADHERED TO.4.FOLLOW INSTRUCTIONS-ALL OPERATION AND USE INSTRUCTIONS SHOULD BE FOLLOWED. 5.WATER AND MOISTURE - THE APPLIANCE SHOULD NOT BE USED NEAR WATER;FOR EXAMPLE NEAR A BATHTUB, WASHBOWL,KITCHEN SINK,LAUNDRY TUB,IN A WET BASEMENT OR NEAR A SWIMMING POOL AND THE LIKE.6.CARTS AND STANDS - THE APPLIANCE SHOULD BE USED ONLY WITH A CART OR STAND THAT IS RECOMMENDED BY THE MANUFACTURER. AN APPLIANCE AND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS,EXCESSIVE FORCE AND UNEVEN SURFACES MAY CAUSE THE APPLIANCE AND CART COMBINATION TO OVERTURN.7.WALL AND CEILING MOUNTING - THE APPLIANCE SHOULD BE MOUNTED TO A WALL OR CEILING ONLY AS RECOMMENDED BY THE MANUFACTURER.8.VENTILATION - THE APPLIANCE SHOULD BE SITUATED SO THAT IS LOCATION OR POSITION DOES NOT INTERFERE WITH ITS PROPER V ENTILATION . FOR EXAMPLE, THE APPLIANCE SHOULD NOT BE SITUATED ON A BED, SOFA, RUG OR SIMILAR SURFACE THE MAY BLOCK THE VENTILATION OPENINGS;OR PLACED IN A BUILT - IN INSTALLATION SUCH AS A BOOKCASE OR CABINET THAT MAY IMPEDE THE FLOW OF AIR THROUGH THE VENTILATION OPENINGS. 9.HEAT - THE APPLIANCE SHOULD BE SITUATED AWAY FROM HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOVES OR OTHER APPLIANCES (INCLUDING AMPLIFIERS)THAT PRODUCE AWAY FROM HEAT.10.POWER SOURCES - THE APPLIANCE SHOULD BE CONNECTED TO A POWER SUPPLY ONLY OF THE TYPE DESCRIBED IN THE OPERATING INSTRUCTIONS OR AS MARKED ON THE APPLIANCE.11.GROUNDING OR POLARIZATION - PRECAUTIONS SHOULD BE TAKEN SO THAT THE GROUNDING OR POLARIZATION MEANS OF AN APPLIANCE IS NOT DEFEATED.12.POWER - CORD PROTECTION - POWER SUPPLY CORDS SHOULD BE ROUTED SO THAT THEY ARE NOT LIKELY TO BE WALKED ON OR PINCHED BY ITEMS PLACED UPON OR AGAINST THEM, PAYING PARTICULAR ATTENTION TO CORDS AT PLUGS, CONVENIENCE RECEPTACLES AND THE POINT WHERE THEY EXIT FROM THE APPLIANCE.
E-4LOCATION OF CONTROLS Phonograph Lid support BracketSpeakerSpeakerVOLUME ControlHandle LatchPhonograph Lid USB SocketUSB-MP3PLAYER ButtonSTANDBY/ON ButtonPHONO-RECButtonPHONO PLAYERButtonBT ButtonFRONT PANELSTANDBY/ONIndicatorUSB PLAYERIndicatorBT IndicatorPHONO PLAYER/REC IndicatorE-313.PROTECTIVE ATTACHMENT PLUG - THE APPLIANCE IS EQUIPPED WITH AN ATTACHMENT PLUG HAVING OVERLOAD PROTECTION. THIS IS A SAFETY FEATURE. SEE INSTRUCTION MANUAL FOR REPLACEMENT OR RESETTING OF PROTECTIVE DEVICE.IF REPLACEMENT OF THE HAS THE SAME OVERLOAD PROTECTION AS THE ORIGINAL PLUG. 14.CLEANING - THE APPLIANCE SHOULD BE CLEANED ONLY AS RECOMMENDED BY THE MANUFACTURER.15.POWER LINES - AN OUTDOOR ANTENNA SHOULD BE LOCATED AWAY FROM POWER LINES.16.OUTDOOR ANTENNA GROUNDING - IF AN OUTSIDE ANTENNA IS CONNECTED TO THE RECEIVER,BE SURE THE ANTENNA SYSTEM IS GROUNDED SO AS TO PROVIDE SOME PROTECTION AGAINST VOLTAGE SURGES AND BUILT UP STATIC CHARGES.17.NONUSE PERIODS - THE POWER CORD OF THE APPLIANCE SHOULD BE UNPLUGGED FROM THE OUTLET WHEN LEFT UNUSED FOR A LONG PERIOD OF TIME. 18.OBJECT AND LIQUID ENTRY - CARE SHOULD BE TAKEN SO THAT OBJECTS DO NOT FALL AND LIQUIDS ARE NOT SPILLED INTO THE ENCLOSURE THROUGH OPENINGS.19.DAMAGE REQUIRING SERVICE - THE APPLIANCE SHOULD BE SERVICED BY QUALIFIED SERVICE PERSONNEL WHEN: A. THE POWER SUPPLY CORD OR THE PLUG HAS BEEN DAMAGED OR B. OBJECTS HAVE FALLEN OR LIQUID HAS BEEN SPILLED INTO THE APPLIANCE OR C. THE APPLIANCE HAS BEEN EXPOSED TO RAIN OR D. THE APPLIANCE DOSE NOT APPEAR TO OPERATE NORMALLY OR EXHIBITS A MARKED CHANGE IN PERFORMANCE OR E. THE APPLIANCE HAS BEEN DROPPED OR THE ENCLOSURE DAMAGED 20.SERVICING - THE USER SHOULD NOT ATTEMPT TO SERVICE THE APPLIANCE BEYOND THAT DESCRIBED IN THE OPERATING INSTRUCTIONS. ALL OTHER SERVICING SHOULD BE REFERRED TO QUALIFIED SERVICE PERSONNEL.The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the product. NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : -Reorient or relocate the receiving antenna. -Increase the separation between the product and receiver. -Connect the product into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
E-5E-63.5mm AUX-IN JackLINE OUT RLINE OUT LDC INPUT SocketTURNTABLE 45 RPMADAPTORBACK PANELTURNTABLE PANELTRANSIT SCREWCROSSINGLIFT LEVERSPEED SELECTOR(33/45/78 RPM)TONE ARM LOCKTONE ARM WITH STYLUSVOLUMECONTROLHEADPHONEPOWERING ON THE UNITUNPACKING AND SET UP- CONNECT THE AC ADAPTER TO THE DC INPUT SOCKET ON THE BACK OF THE UNIT. THEN THE STANDBY/ON INDICATOR WILL LIGHT ON, NOW THE UNIT ON "STANDBY" MODE.- PRESS STANDBY/ON BUTTON. THE DESIRED PLAYING SOURCE INDICATOR WILL LIGHT ON.- WHEN YOU HAVE FINISHED USING THE SYSTEM, PRESS STANDBY/ON BUTTON AGAIN, TURN OFF THE UNIT WITH VOICE MESSAGE: POWER OFF. - CAREFULLY REMOVE THE UNIT FROM THE DISPLAY CARTON AND REMOVE ALL PACKING MATERIAL FROM THE UNIT.- UNWIND THE AC ADAPTOR JACK CABLE AND EXTEND IT TO ITS FULL LENGTH.- PLACE THE UNIT ON A STABLE, LEVEL SURFACE, CONVENIENT TO AN AC OUTLET OUT OF A STRONG MAGNETIC FIELD.- CONNECT THE AC ADAPTOR PLUG TO YOUR AC OUTLET.- REMOVE THE OPAQUE WHITE PLASTIC STYLUS COVER FROM THE PHONOGRAPH STYLUS BY SLIDING IT IN THE DIRECTION OF THE ARROW.- DURING THIS OPERATION PAY ATTENTION TO THE STYLUS, BECAUSE THE STYLUS DAMAGE IS NOT COVERED BY GUARANTEE.- REMOVE THE TWIST-TIE THAT WAS USED TO SECURE THE TONE AR M DURING THE SHIPMENT.- RELEASE THE TONE ARM LOCK LEVEL.
Download:
Mirror Download [FCC.gov]
Document ID3035862
Application IDt1LYg0WExnGk6ZqJE9LIFw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize62.34kB (779216 bits)
Date Submitted2016-06-22 00:00:00
Date Available2016-06-22 00:00:00
Creation Date2016-05-05 09:24:21
Producing SoftwareCorel PDF Engine Version 3.0.0.739
Document Lastmod2016-05-05 09:24:21
Document TitleTT-9311-BTM3EJ-S01_ENGLISH_FCC_V1-160505
Document CreatorCorelDRAW
Document Author: NEWGMA
FCC ID Filing: 2AANA-SEM-TT9311

Navigation menu