SAGEMCOM BROANDS PPX3610 Pocket Projector User Manual Part 2

Download:
Mirror Download [FCC.gov]
Document ID	2044033
Application ID	UNG+q7CIYg0JNMYZM5tcIQ==
Document Description	Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	406.93kB (5086621 bits)
Date Submitted	2013-08-15 00:00:00
Date Available	2013-08-15 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	cairo 1.10.2 (http://cairographics.org)
Document Lastmod	0000-00-00 00:00:00
Document Title	Part 2
Document Creator	cairo 1.10.2 (http://cairographics.org)

Connecting using
Component-Video (YPbPr/
YUV) Cable
Please use this type of connection to obtain the highest
possible image quality. This cable is available as an accessory. The device jacks have the colours green (Y), blue
(U/Pb), red (V/Pr) for the video signal and red (audio
right) and white (audio left) for the audio signal.
Connecting to mobile multimedia devices
Some video devices (e.g.: pocket multimedia players, ...)
require specific connection cables. There are either
supplied with the device or acquired from the manufacturer of the multimedia device. Please note that only the
original cables from the device manufacturer may function.
VG
Y-PbA
HD -P
MI r
VG
Y-PbA
HD -P
MI r
Notice
1 Connect the video component cable (accessory) to
the projector's HDMI socket.
2 Connect the video device's appropriate coloured
sockets to the component video cable of the projector using a conventional component video (RCA)
cable.
Switching to the Multimedia Device Signal Output
See the multimedia device instruction manual
to find out how to switch the signal output to
this jack.
Notice
YCbCr
Note that the YPbPr outlets are labelled
YCbCr on some devices.
Notice
Two Red Phono (RCA) Connectors
When connecting, note that there are two
red phono (RCA) connectors on the cable.
One is for the right audio signal and the
other for the V/Pr element of the component video signal. If these two connectors
are inserted incorrectly, the projected
image appears green and the audio signal
for the right speaker will not work.
3 Select Menu > Source and switch to Component.
Connect to the Playback Device
16
Directly Connecting
Projector to Computer using
WLAN (WiFi Streaming)
With the software PicoPixWlink you can connect the
projector to a computer or a laptop over your wireless
network. For this purpose, both devices must be connected to the same wireless network.
1 Install the PicoPixWlink software (allready pre
installed on the projector) on your computer (see
also Connect to a Computer (USB), page 19).
2 Connect the device with the wireless network (see
also Wireless Network (WLAN), page 20).
3 Start PicoPixWlink (PicoPix Viewer) on your computer.
4 Click the PicoPixWlink icon in the notification area
and start the manager window.
You are now able to search for projectors in the network (Search WIFI projector) and start the projection
(Start projection).
17
Connecting the headphones
1 Before connecting the headphones, turn down the
volume on the device.
2 Connect the headphones to the projector's headphone slot. The device speakers deactivate automatically when the headphones are connected.
VG
Y-P A
HDb-P
MI r
3 After connecting the headphones, increase the volume to a comfortable level.
DANGER!
Danger of Hearing Damage
Do not use the device over a longer time at
high volume – especially when using headphones. This could lead to the risks of hearing
damage. Before connecting the headphones,
turn down the volume on the device. After
connecting the headphones, increase the volume to a comfortable level.
Philips · PPX3610
5 Memory
Inserting a Memory Card
Connecting USB Storage
Medium
Y-PGA
HDb-P
MI r
1 Insert a memory card with the contacts facing
upwards into the SD/MMC slot at the back of the
device. Your device supports the following memory
cards: SD/SDHC/SDXC/MMC.
2 Insert the memory card into the slot until it snaps
into position.
1 Connect the USB storage medium to the USB port
on the side of the device.
DANGER!
Inserting a Memory Card!
Never pull out the memory card while the
device is accessing it. This could cause data
to be damaged or lost.
Switch the device off in order to make sure
that the device does not access the memory card.
3 Press lightly on the memory card to remove it.
4 The memory card is ejected.
Memory
18
Connect to a Computer
(USB)
5 Confirm to enable the connection.
You can use the USB cable to connect the Pocket
Project to a computer. In this way, you are able to copy
files back and forth between the internal memory, an
inserted memory card and the computer. You can also
delete the files. You can playback the files saved on the
Pocket Projector on your computer.
Notice
VG
Y-PbA
HD -P
MI r
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
Successful Connection
You cannot use the memory for media
playback when the Pocket Projector is
connected to a computer via USB. Use
WiFi Streaming instead (see also Directly
Connecting Projector to Computer using
WLAN (WiFi Streaming), page 17).
6 If a memory card has been inserted, it will be displayed as another disk drive.
7 You can move, copy or delete data from the computer, the memory card (if inserted) and the internal
memory.
3 Connect the mini-USB port to the Pocket Projector
and the USB socket to the computer.
4 A confirmation screen appears when the devices are
connected successfully.
19
Philips · PPX3610
6 Wireless Network (WLAN)
In a wireless network (Wireless Local Area Network,
WLAN) at least two computers, printers or other additional devices communicate with each other over radio
waves (high frequency waves). Data transmission in the
radio network is based on the standards 802.11b,
802.11g and 802.11n.
DANGER!
Information on Using WLAN!
The functioning of security systems, medical
equipment or sensitive devices can be disrupted by the transmission power of the
device. Observe any usage regulations (or
restrictions) in the vicinity of such equipment.
The use of this device can affect the operation
of insufficiently shielded medical devices and
hearing aids and pacemakers through the
release of high frequency radiation. Also consult a doctor or the manufacturer of the medical device to establish whether these are sufficiently shielded from external high frequency
radiation.
Infrastructure Wireless Network
In an infrastructure network, multiple devices communicate via a central access point (gateway, router). All
data are sent to the access point (gateway, router) and
distributed from there.
Switching Wireless
Networking (WLAN) on/off
Wireless networking is deactivated by default. You have
the option of turning this function on.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
Use the navigation keys to select Settings.
Confirm with à.
Using ¡/¢ select WIFI & DLNA.
Confirm with à.
Using ¡/¢ select WIFI Network.
Confirm with à.
Wireless Network (WLAN)
9 Modify the settings with ¡/¢.
10 Confirm with à.
The ¿ key takes you one step back in the menu.
Setting up a Wireless
Network (WLAN)
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Settings.
4 Confirm with à.
5 Using ¡/¢ select WIFI & DLNA.
6 Confirm with à.
7 Using ¡/¢ select Network Selection.
8 Confirm with à.
9 Use ¡/¢ to select the desired wireless network..
10 Confirm with à.
11 If your wireless network is password protected, an
input window appears. Click in the input field (see
also Touchpad / Gestures, page 7) using the touchpad or a mouse.
12 Using the touchpad or a mouse enter the password
on the software keyboard.
13 Click on Connect.
The ¿ key takes you one step back in the menu.
20
Setting up a Wireless
Network (WLAN) Using the
Wizard
You can integrate your device very quickly and easily
into an existing wireless network using Wi-Fi Protected
Setup (WPS) or using a wireless network scan. Using
WPS, all important settings like network name (SSID)
are automatically configured and the connection protected with secure WPA Encryption.
Using Wi-Fi Protected Set-up
(WPS)
Digital Living Network
Alliance (DLNA)
This device supports Digital Living Network Alliance
(DLNA). Using this standard you can quickly interconnect your multimedia devices.
Switching DLNA on and off
The DLNA function is switched on by default. You have
the option of turning this function off.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
Using Wi-Fi Protected Setup (WPS), you can integrate
your device into an existing wireless network in two different ways very quickly and easily. You can activate the
login with a pin code or using Push Button Configuration (PBC), if your access point (Access Point, Router)
supports this method.
Using WPS with Push Button
Configuration (PBC)
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Settings.
4 Confirm with à.
5 Using ¡/¢ select WIFI & DLNA.
6 Confirm with à.
7 Using ¡/¢ select Network Selection.
8 Confirm with à.
9 Use ¡/¢ to select the desired wireless network..
10 Confirm with à.
11 Activate Push Button Configuration on the WLAN
access point. The WLAN access point and device
connect automatically and create a WPA protected
connection.
21
3 Use the navigation keys to select Settings.
4 Confirm with à.
5 Using ¡/¢ select WIFI & DLNA.
6 Confirm with à.
7 Using ¡/¢ select DLNA Sharing.
8 Confirm with à.
9 Modify the settings with ¡/¢.
10 Confirm with à.
The ¿ key takes you one step back in the menu.
Play Media Using DLNA
If DLNA enabled devices are located in the connected
network, then you can access them in media playback
and file management (see also Media Playback, page 22).
DLNA Control
You can control the projector using another device (e.g.
a smartphone) using DLNA. To do this, see the instruction manual for the device in question.
Philips · PPX3610
7 Media Playback
7 Use ¡/¢ to select the video file that you wish to
play.
Notice
Navigation Keys
All the keys shown are buttons on the remote
control.
Notice
Best Settings for Optimal Use
Read the informations on the best settings in
the chapter settings (see also Settings,
page 34) for optimal use of your device.
Video playback
Notice
Displaying Video Files
Only those videos that are compatible
with the Pocket Projector will be displayed.
Video Playback (USB/SD Card/
Internal Memory/DLNA)
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
8 Press à to start playback.
9 Press ¿ to end the slide show and return to the
overview.
10 When you press ¿ again, you will return to the
main menu.
Notice
Navigation During Playback
Review / cue: Press :/; on the remote
control or À/Á on the device.
Press T to stop or continue playback.
3 Use the navigation keys to select Videos.
4 Confirm with à.
5 With connected memory: Using the keys ¡/
¢ select the internal memory, a DLNA device, the
USB storage medium or the memory card.
6 Confirm with à.
Media Playback
During playback you can adjust the volume using ¬/­
on the remote control. Press « or ¬ repeatedly to
shut off the volume completely.
File Format
There are various video file formats as *.mov, *.avi,
*.m4v. Many of these formats function as a container
that contains the various encoded audio and video files.
MPEG-4, H.264, MP3, and AAC are all examples of
encoded audio/video files. In order to play these files,
the projector must read them and decode the audio/
video signals.
22
Please note that some files cannot be played as a result
of different video and audio encoders.
Supported file formats
Container
Video format
*.avi, *.mov, *.mp4
MJPEG, MPEG-4, H.264
*.mkv
MPEG-4, H.264
*.ts
MPEG-2, H.264
*.m2ts
H.264
*.3gp
H.263
*.rm, *.rmvb
Real video
*.dat
MPEG-1
*.vob
MPEG-2
*.mpg, *.mpeg
MPEG-1, MPEG-2
Video Playback (Mini-HDMI
Socket)
1 Connect the audio/video output of the external
device to the Pocket Projector's HDMI socket. Use
the corresponding cable and cable adapter for this
purpose (see also Connect to the Playback Device,
page 14).
2 To find out how to deactivate the video output for
the external device, please see the relevant instruction manual. Most often, this option is labelled "TV
out" or "TV Output" in the corresponding menu.
3 Start the video playback on the external device.
4 Modify the volume with ¬/­.
Modify settings during playback
1 Press the ¡ or ¢ key.
2 Use the ¡/¢ keys to choose from the following
settings:
Volume: Adjust volume level
Smart Settings: Select predefined settings for
brightness / contrast / colour saturation
Saturation: Adjust colour saturation
Contrast: Adjust contrast
Brightness: Adjust brightness
3 Modify the setting using À/Á.
The device saves the modified settings automatically.
Photo Playback
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Pictures.
4 Confirm with à.
5 With connected memory: Using the keys ¡/
¢ select the internal memory, a DLNA device, the
USB storage medium or the memory card.
6 Confirm with à.
7 Miniature photos are displayed on the screen as an
overview.
Notice
Miniature View or List
In the settings, you are able to select
whether the overview will be displayed as
miniatures or in a list.
Notice
Many Photos on the Memory Card or
the USB Medium
If there are a lot of photos on the memory
card or the USB storage medium it can
take a moment before the overview
appears.
8 Use À/Á or ¡/¢ to select the image that you
want to start the slide show with.
9 Press à to start the slide show.
23
Philips · PPX3610
Notice
Rotate the Image
Using your thumb contact the touchpad
and swipe with the forefinger in a circular
manner to rotate an image (see also
Touchpad / Gestures, page 7).
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
10 Press T to pause the slide show.
11 Press ¿ to end the slide show and return to the
overview.
12 When you press ¿ again, you will return to the
main menu.
Slide Show with Background
Sound
Start the slideshow.
Press ¡/¢, to open the menu bar.
Using À/Á select Ó.
Confirm with à.
Use ¡/¢ to select the file that you wish to play.
3 Use the navigation keys to select Music.
4 Confirm with à.
5 With connected memory: Using the keys ¡/
¢ select the internal memory, a DLNA device, the
USB storage medium or the memory card.
6 Confirm with à.
7 Use ¡/¢ to select the file that you wish to play.
Notice
Storage Location
Only files from the internal memory/Memory Card/USB Storage Medium can be
played.
6 To start the background sound confirm with à.
7 Press ¬/­ to adjust the volume level.
8 If no input is made, the menu bar is hidden after 5
seconds.
Music Playback
8 Press à to start playback.
9 Press T to stop or continue playback.
Notice
Notice
Navigating when Image Playback is
Switched off
Press ¡/¢ to skip to the previous or
next song.
Press T to stop or continue playback.
Press ¿ to return to the selection.
Switch off the Image Playback
You can turn off image playback while playing
music in order to save power (see also Music
settings, page 34). As soon as you press the
¿ key, the image reappears and the fan starts
again.
During playback you can adjust the volume using ¬/­
on the remote control. Press « or ¬ repeatedly to
shut off the volume completely.
Notice
Touchpad / Gestures
Swipe left and right on the bottom edge of the
touchpad to adjust the volume.
Swipe over the touchpad with two fingers to
rewind and fast forward (see also Touchpad /
Gestures, page 7).
Media Playback
24
Office Playback (YOZO
Office)
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
You can display documents with YOZO Office.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Folder View.
4 Confirm with à.
5 With an inserted memory card or USB storage device: Select the internal memory, the USB
storage medium or the memory card using the keys
¡/¢.
6 Confirm with à.
7 Use ¡/¢ to select the file that you want to display.
3 Use the navigation keys to select Folder View.
4 Confirm with à.
5 With an inserted memory card or USB storage device: Select the internal memory, the USB
storage medium or the memory card using the keys
¡/¢.
6 Confirm with à.
7 Use ¡/¢ to select the file that you want to copy.
Notice
No Files Found (0 files)
Only those files that are compatible with
the Projector will be displayed.
8 Mark the file using Á. Pressing the key again deselects the chose file(s).
Notice
Mark the Entire Folder
You can also mark an entire folder to copy
all files from the folder. Note that the copy
process of large folders can takes some
time.
8 Press à to start the display.
9 Swipe up and down on the right edge of the touchpad to scroll. Use the touchpad or a mouse to zoom
in / zoom out the document (see also Touchpad /
Gestures, page 7).
10 Press ¿ to end the display and return to the overview.
9 Use ¡/¢ to select other files.
10 Press à.
11 Select with ¡/¢ Copy.
Managing Files
Copy Files
You can copy files back and forth from the internal
memory to the connected USB storage medium or
memory card.
25
12 Confirm with à.
Philips · PPX3610
13 Use ¡/¢ to select the destination memory: SD
card, internal memory or USB storage medium.
14 Confirm with à.
7 Use ¡/¢ to select the file that you want to delete.
Notice
No Files Found (0 files)
Only those files that are compatible with
the Projector will be displayed.
Notice
Files Already Exist
If the files you are copying already exist in
the target folder, you must choose
whether or not you want to overwrite
them using ¡/¢ and à. If you choose
not to overwrite these files, copies will be
created. The copies can be recognised by a
number added to the file names.
15 The files are copied.
Notice
8 Mark the file using Á. Pressing the key again deselects the chose file(s).
9 Use ¡/¢ to select other files.
10 Press à.
11 Select with ¡/¢ Delete.
12 Confirm with à.
13 Use ¡/¢ if you want to delete the files or cancel
the deletion process.
Error
If errors occur during the copying process,
make sure that enough free space is available on the medium.
Notice
Removing Storage Medium
Only remove the storage medium after the
copy process is complete.
Delete Files
You can delete files from the internal memory, the connected USB storage medium or the memory card.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
14 Confirm with à.
Notice
Error
If errors occur during the deletion process, make sure that the storage medium is
not write-protected.
Notice
3 Use the navigation keys to select Folder View.
4 Confirm with à.
5 With connected memory: Using the keys ¡/
¢ select the internal memory, a DLNA device, the
USB storage medium or the memory card.
6 Confirm with à.
Media Playback
Deleting Photos on the Memory Card
When deleting photos via the computer, note
that the photos may not be correctly displayed when the memory card is inserted into
the digital camera again. Digital cameras
sometimes store additional information in
specific folders, including previews and orientation information.
For this reason, only delete the photos using
the digital camera.
26
8 Digital TV Playback
Notice
Necessary Accessories
To be able to use the DVB-T function of your
projector, you either require the Pico Station
PPA7301 (not supplied) or the USB DVB-T
stick PPA8301 (not supplied).
You can purchase the Pico Station docking
station and th USB DVB-T stick according to
the ordersheet.
Connecting the Aerial to the USB
DVB-T Stick PPA8301
Connecting the Aerial
Notice
Aerial Size and Orientation
In some regions it is necessary to connect a
larger aerial in order to grant the reception.
In some countries it is necessary to point the
aerial horizontally in order to grant the reception.
1 Connect the USB-DVB-T stick to the USB port on
the side of your projector.
2 Connect the aerial to the USB-DVB-T stick.
Notice
Connecting the Aerial to the Pico
Station PPA7301
Standard Definition Television
The Pico StationUSB-DVB-T Stick PPA8301
supports Standard Definition Television
(SDTV). High Definition Television (HDTV) is
not supported.
CAUTION!
1 Connect the aerial to the aerial socket.
Notice
Standard Definition Television
The Pico Station PPA7301 supports Standard
Definition Television (SDTV). High Definition
Television (HDTV) is not supported.
27
Do not Remove DVB-T Stick During
Playback!
Do not pull out the DVB-T stick from the
device or remove the device from the Pico
Station (PPA7301) while you have accessed
the DVB sub menu. Preset channels may get
lost. Exit the DVB sub menu before pulling out
the DVB-T stick of the device or remove the
device from the Pico Station (PPA7301).
If the DVB-T stick is being removed during
playback you may have to restart the device.
Philips · PPX3610
First Playback
Notice
Navigation Keys
All the keys shown are buttons on the remote
control.
When the DVB-T function is first started, the automatic
channel search must be started.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
Scan Channels
14 Use the navigation keys to select Scan Channels.
15 Confirm with à.
16 Use the navigation keys to select OK.
17 Confirm with à.
18 Use the navigation keys to select Auto.
19 Confirm with à.
Television
20 Use the navigation keys to select Video Broadcast.
21 Confirm with à.
22 Change the channel using z/{.
Notice
Displaying Channel Information
When changing channel, channel information is displayed on the bottom projection
edge. The information bar is hidden after 5
seconds.
3 Connect the aerial (see also Connecting the Aerial,
page 27).
4 Use the navigation keys to select Digital TV.
5 Confirm with à.
6 The sub menu appears.
23 Press u to end playback and return to the main
menu.
During playback you can adjust the volume using ¬/­
on the remote control. Press « or ¬ repeatedly to
shut off the volume completely.
Set Area
7 Use the navigation keys to select Utilities/Setup.
8 Confirm with à.
9 Use the navigation keys to select Area set.
10 Confirm with à.
11 Use the navigation keys to select your area.
12 Confirm with à.
13 Press ¿ to end the sub menu and return to the
overview.
Digital TV Playback
28
Television
Notice
Navigation Keys
All the keys shown are buttons on the remote
control.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3 Connect the aerial (see also Connecting the Aerial,
page 27).
4 Use the navigation keys to select Digital TV.
5 Confirm with à.
6 The sub menu appears.
7 Use the navigation keys to select Video Broadcast.
8 Confirm with à.
9 The last viewed channel is played. Change the channel using z/{.
Notice
Displaying Channel Information
When changing channel, channel information is displayed on the bottom projection
edge. The information bar is hidden after 5
seconds.
10 Press u to end playback and return to the main
menu.
During playback you can adjust the volume using ¬/­
on the remote control. Press « or ¬ repeatedly to
shut off the volume completely.
29
Philips · PPX3610

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 14
Creator                         : cairo 1.10.2 (http://cairographics.org)
Producer                        : cairo 1.10.2 (http://cairographics.org)

EXIF Metadata provided by EXIF.tools