SAMSUNG DVD/VCR Combo Manual L0903351
User Manual: SAMSUNG SAMSUNG DVD/VCR Combo Manual SAMSUNG DVD/VCR Combo Owner's Manual, SAMSUNG DVD/VCR Combo installation guides
Open the PDF directly: View PDF .
Page Count: 92
Download | |
Open PDF In Browser | View PDF |
UI E_3 _ _ D1 SAFETY important I INSTRUCTIONS Safety instructions 1) Readthese instructions. 2) Keepthese instructions. 3) Heedall warnings. 4) Followall instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilationopenings, Installin accordancewith the manufacturer'sinstructions. 8) Do not install near any heat sources such as radiators,heat registers, or other apparatus (including amplifiers)that produce heat. 9) Do not defeat the safety purpose of the polarizedor grounding- type plug.A polarized plug has two blades with one widerthan the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.If the providedplug does not fit into your outlet, consult an electricianfor replacementof the obsolete outlet. 10) Protectthe power cord from being walked on or pinched particularlyat plugs, conveniencereceptacles, and the point where they exit from the apparatus. 11)Only use attachments/accessoriesspecified by the manufacturer. 12) Use only with cart, stand, tripod, bracket, or table specifiedby the manufacturer,or sold with the apparatus. 13) Unplugthis apparatus.When a cart is used, use caution when movingthe cart/apparatuscombinationto avoid injury from tip-over. 14) Refer all servicingto qualifiedservice personnel. Servicing is required when the apparatus has been damaged in any way,such as power-supplycord or plug is damaged, liquid has been spilled or objects have fallen into the apparatusthe apparatus has been exposed to rain or moisture, does not operate normally,or has been dropped. ENG-2 SAFETY I INSTRUCTIONS Precautions RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates"dangerousvoltage" insidethe product that presentsa risk of electric shock or personal injury. This symbol indicates important instructions accompanyingthe product. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture. Note to CATV system installer:This reminder is provided to call CATV system instatIer'sattentionto Article 820-40 of the National Electrical Code (Section54 of Canadian ElectricalCode, Part I) that provides guidelines for proper grounding and, in particular,specifiesthat the cable ground shall be connectedto the grounding systemof the building as close to the point of cable entry as practical. Caution: FCC regulations state that any unauthorizedchanges or modificationsto this equipment may void the user's authorityto operate it. FCC NOTE (for U.S.A): This equipment has been tested and foundto comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designedto provide reasonableprotectionagainst harmful interferencein a residential installation.This equipment generates,uses and can radiate radio frequency energyand, if not installed and used in accordancewith the instructions, may cause harmful interferenceto radio or television reception,which can be determined by turning the equipment off and on. The user is encouragedto try to correct the interferenceby one or more of the following measures. • Reorient or relocate the receiving antenna. • Increasethe separation betweenthe equipment and receiver. • Connectthis equipment into an outlet on a circuit different from that to which the receiver is connected. • Consultthe dealer or an experienced radio/TV technicianfor help. This class B digital apparatus meets atI requirementsof the CanadianInterference-Causing Equipment Regulations. ENG-3 1 SAFETY INSTRUCTIONS ] CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. N ore: • This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. • This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, the DVD player cannot play the disc. • The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3or ISO/IEC 13818-3. Handling Cautions , Beforeconnectingother components to this player,be sureto turn them all off. • Do not move the playerwhile a disc is being played, or the disc may be scratchedor broken, and the player's internal parts may be damaged. • Do not put a flower vase filled with water or any small metal objects on the player. • Be careful not to put your hand into the disc tray. • Do not placeanything otherthan the disc in the disc tray. • Exterior interferencesuch as lightningand static electricitycan affect normal operationof this player. If this occurs, turn the playeroff and on again with the POWER button, or disconnectand then reconnect the AC power cord to the AC power outlet. The player will operate normally. • Be sure to removethe disc and turn off the player after use. • Disconnectthe AC power cord from the AC outlet when you don't intend to use the playerfor long periodsof time. • Cleanthe disc by wiping in a straightline from the inside to the outside of the disc. Disc Storage_ Be careful not to harmthe disc becausethe data on these discs is highlyvulnerableto the environment. • Do not keep under direct sunlight. • Keep in a cool ventilated area. • Storevertically. • Keep in a clean protectionjacket. Maintenance of Cabinet For safety reasons, be sureto disconnect the AC power cord from the AC outlet. • Do not use benzene,thinner, or other solvents for cleaning. •Wipe the cabinet with a soft cloth. ENG-4 I BEFORE Before YOU you START start Accessories Install Remote Control Batteries-2EA Video/Audio Cable Antenna Cable AK59-00051A 1.5V(AAA) AC43-12002H AC39-00073A AC39-42001J Batteries in the Remote Control 1 Open the batterycover on the back of the remote control. 2 Inserttwo AAA batteries. Make sure that the polarities(+ and -) are aligned correctly. 3 Replace the battery cover. 41. if the remote controldoesn't operate properly: [] Check the polarity +, - of the batteries (Dry-Cell) [] Check if the batteries are drained. [] Check if remote control sensor is blocked by obstacles. [] Check if there is any fluorescent lighting nearby. ENG-5 User'sGuide AK68-00956E TABLE Table OF CONTENTS l of Contents Safety Instructions ........................................................................................................................................ 2 Important Safety Instructions ................................................................................................................ 2 Precautions .......................................................................................................................................... 3 Before you start ............................................................................................................................................ 5 Accessories............................................................................................................................................ 5 Install Batteriesin the RemoteControl .................................................................................................. 5 Chapter 1: Setup General Features............................................................................................................................................ 8 Disc Type and Characteristics........................................................................................................................ 9 Description.................................................................................................................................................... 10 Tourof the Remote Control.................................................................................................................. 12 Chapter 2: Connections Connecting the Antenna Cable .................................................................................................................... Method1: Antenna + DVD-VCR + TV: No Cable box .......................................................................... 13 13 Method2: Antenna + DVD-VCR + TV: Cable box with many scrambled channels .............................. 14 Method3: Antenna + DVD-VCR + TV: Cable box with a few scrambled channels .............................. 14 Before Connecting the DVD-VCR .............................................................................................................. Connection to a TV ...................................................................................................................................... 15 15 Connection to a TV (Video) .................................................................................................................. Connection to a TV (S-Video) ............................................................................................................ 15 16 Connection to a TV (Interlace) ............................................................................................................ 17 Connection to a TV (Progressive) ........................................................................................................ Connection to an Audio System .................................................................................................................. 18 19 Connection to an Audio System (2 Channel Amplifier) ........................................................................ 19 Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) .......................................... 20 Connecting a Power Cord & Auto Setup ...................................................................................................... Chapter 3: Initial 21 Setup Selecting a Menu Language ........................................................................................................................ 22 Setting the Clock ........................................................................................................................................ 23 Settingthe ClockAutomatically............................................................................................................ 23 Settingthe Clock Manually ................................................................................................................ 24 Memorizingthe Channels ............................................................................................................................ 26 Selectingthe Video Signal-source ...................................................................................................... 26 StoringChannels in Memory(Automatic Method) .............................................................................. 27 Adding and ErasingChannels (Manual Method) ................................................................................ 27 Selecting the RF Output Channel ................................................................................................................ 28 Selecting the Front Panel Display .............................................................................................................. 29 Setting the PowerOff Automatically ............................................................................................................ 30 ENG-6 Chapter 4: TABLE OF CONTENTS DVD Operations Playinga Disc .............................................................................................................................................. 31 Using the Searchand Skip Functions ........................................................................................................ 33 Using the Display Function .......................................................................................................................... 34 Using the Disc and Title Menu (DVD) .......................................................................................................... 36 Using the Function Menu (DVD) .................................................................................................................. 37 Repeat Play ................................................................................................................................................ 38 Slow Repeat Play ........................................................................................................................................ 40 Adjustingthe Aspect Ratio (EZ View) .......................................................................................................... 41 Selectingthe Audio Language .................................................................................................................... 43 Selectingthe Subtitle Language ................................................................................................................ 44 Changingthe CameraAngle ...................................................................................................................... 45 Using the BookmarkFunction (DVD) .......................................................................................................... 45 Using the Zoom Function (DVD) .................................................................................................................. 47 Clips Menufor MP3/WMA/JPEG/MPEG4.................................................................................................... 48 Folder Selection .......................................................................................................................................... 48 MP3/WMAPlayback .................................................................................................................................... 49 MPEG4 Playback ........................................................................................................................................ 51 Program Play & Random Play...................................................................................................................... 53 Picture CD Playback .................................................................................................................................... 54 Using the Setup Menu ................................................................................................................................ 56 Setting Up the Language Features .............................................................................................................. 57 Setting Up the Audio Options ...................................................................................................................... 59 Setting Up the Display Options .................................................................................................................... 61 Setting Up the Parental Control .................................................................................................................. 63 Chapter 5: VCR Operations Insertingand Ejecting a Video CassetteTape ............................................................................................ 66 Playinga Pre-RecordedVideo CassetteTape ............................................................................................ 67 SpecialVCR Playback Features ................................................................................................................ 68 Using AutomaticTracking ............................................................................................................................ 69 Selectingthe CassetteType ........................................................................................................................ 70 Setting the Auto Play .................................................................................................................................. 71 Setting the Auto Repeat .............................................................................................................................. 72 Using the Tape Counter .............................................................................................................................. 73 Using the Assemble Edit Function .............................................................................................................. 74 Selectingthe Audio Output Mode ................................................................................................................ 75 Searchingfor a Specific Sequence ............................................................................................................ 76 Basic Recording .......................................................................................................................................... 78 Special Recording Features ........................................................................................................................ 79 Using One-TouchRecording ...................................................................................................................... 80 Selectingthe RecordingSpeed .................................................................................................................. 81 Making a Timer Recording .......................................................................................................................... 82 Chapter 6: Reference Troubleshooting .......................................................................................................................................... 84 TechnicalSpecifications .............................................................................................................................. 86 ENG-7 SETUP General DVD-VCR Features Note This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Features []Perfect compatibility to play back DVDs, audio CDs or VHS Tapes. [] Enjoy a DVD movie while recording a TV show to the VCR [] Auto Setup instantly finds the time and runs channel search. [] RF input and output. [] Composite, S-Video, and Component Video outputs. [] On-Screen Program (English/French/Spanish). DVD Featu COPY res [] 1C-bitvideo digital to analog converter and 54MHz advanced digital filter. [] Playback of 96KHz/24-bit sources. [] DTS digital output for DTS-enhanced DVDs. [] This unit can play MPEG4 formats within an avi file. [] Playback MP3-CDs. VCR Featu res [] Hi-Fi Stereo VCR [] Superior stow motion and stop action (with 4 heads). [] Playback of S-VHS tapes with a better than standard resolution. [] INTRO Scan, Zero Return, and END Search. [] 7-event/1 month timer recording. [] Time remaining counter, real time counter. Note [] Discs which cannot be played with this player. DVD-ROM/DVD-RAM/VCD CDI/CDV PROTECTION Many DVD discs are encodedwith copy protection. Because of this, you should only connect your DVDVCR directly to your TV, not to a VCR. Connectingto a VCR results in a distortedpicture from copyprotectedDVD discs. This product incorporatescopyright protection technology that is protected by methods claims of certain U.S. patents and other intellectualproperty rights owned by MacrovisionCorporationand other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,and is intendedfor home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.Reverse engineeringor disassemblyis prohibited. PROGRESSIVE OUTPUTS SCAN (525p) "CONSUMERSSHOULD NOTE THATNOT ALL HIGH DEFINITIONTELEVISIONSETS ARE FULLY COMPATIBLEWITH THIS PRODUCTAND MAY CAUSEARTIFACTSTO BE DISPLAYEDIN THE PICTURE. IF 525 PROGRESSIVESCAN PICTURE PROBLEMSOCCUR, IT IS RECOMMENDEDTHAT THE USER SWITCHTHE CONNECTIONTO THE 'STANDARDDEFINITION'OUTPUT.IF THEREARE QUESTIONSREGARDINGYOUR TV SET COMPATIBILITYWITH THIS DVD-VCR, PLEASE CONTACTSAMSUNG'SCUSTOMERSERVICE CENTER." Super Audio CD (CD, HD layer) CDGs play audio only, not graphics. DVD-RW (VR mode) Non-finalizing DVD-RW, -R, DVD+RW, and +R disc. [] Ability to play back may depend on recording conditions. DVD-RW, -R/CD-RW/DVD+RW, +R/CD-ROM ENG-8 I SETUP Disc Type and Characteristics This DVD-VCRis capableof playingthe following types of discs with the correspondingIogos: I I DiscTypes(Loges) RecordingTypes Disc Size Max, PlayingTime DVD Audio + Video VIDEO AUDIO=CD 5 _ Single-sided240 rain. Double-sided480 rain. 3 1/2" Single-sided80 rain. Double-sided160 rain. 5 _ 74 min. 3 1/2" 20 min. DVD containsexcellent sound and video due to Dolby Digital and MPEG-2system. Variousscreen and audio functions can be easily selected throughthe on-screen menu. CD is recordedas a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time. Audio DIGITAL AUDIO Characteristics . CD-R,CD-RW and DVD-RW, -R, DVD+RW, +R discs may not be playable in all cases due to the disc type or condition of the recording. ,, Do not run the player with two discs loaded at the same time. Disc Markings Region Play Region Number NTSCbroadcast system in U.S.A, Canada, Korea, Japan, etc. Dolby Digital disc Number Boththe DVD-VCR and the discs are coded by region.These regional codes must match in order for the disc to play. If the codes do not match, the disc wilI not play. The Region Number for this player is described on the rear panel of the player. Stereodisc DigitalAudio disc [_ DTS disc MP3disc DivX Certification You must only insertone DVD disc at a time, Inserting two DivX, DivX Certified, and or more discs wil! not allowplayback and may cause .......... damage to the DVD-VCR, associated Iogos are trademarks of DivXNetworks,Inc and are used under license. ENG-9 I I SETUP Description Front Panel Controls o O o l Z" C 0 1 O O 2 DISC TRAY Place the disc here. VCR Deck 3 Inserta standard VHS video tape. A, EJECT 4 5 6 7 8 9 0 O 0 12 13 14 15 16 Front Panel Display Operationindicators are displayed here. CHANNEL rand ^ Press to change channels. Panel O O O0 10 DVD/VCR Press to view DVD or VCR mode. 11 EZ VIEW Press to eject a video tape if the tape is stopped. _/I (POWER) Press to turn the DVD-VCRon and off. LINE IN 2 Connectto the Video/Audiooutput jack of your external device. P.SCAN Press to select video out mode. A OPEN/CLOSE Press to open and close the disc tray. Front 00000 The aspect ratio of a picture can easily be adjusted to your TV's screen size. ®REC(VCR) Press to begin recording. _ (Reverse/Rewind) Press to reverse/rewinda disc/video tape. [] (STOP) Press to stop a disc/videotape during playback or record (VCR). _-|| (Play/Pause) Press to play or pause the disc/video tape. It,._ (Forward/Fast Forward) Press to forward/fastforward a disc/videotape. Display I I 0 1 DVD is activated. 2 The time, counter position,time remainingor current deck status is indicated. 3 VCR is activated. 4 DVD or CD media is loaded. 5 VHSvideotape isloaded. ENG-10 I SETUP Rear Panel 0 @ _ 0 0 ::S J ,i 1 2 3 4 [ [ ¢ O AUDIO OUT Connectto the Audio inputjacks of your television. Youcan use as audio output terminal when Componentor S-Video is connected. COMPONENTVIDEO OUT - Use these jacks if you have a TV with ComponentVideo in jacks. These jacks provide PR,PBand Y video. - If Component(ProgressiveScan) Video Output is selected in the AIt Video Out menu or by using the RSCAN button on the front panel, progressivescan modewill be enabled. - If Component(Interlace Scan)Video Output is selected in the AIt Video Out menuor by using the RSCAN button on the front panel, interlaced scan mode will be enabled. LINE IN 1 (VIDEO/AUDIO) Connectto the Video/Audiooutput jack of your external device. LINE OUT(VIDEO/AUDIO) Use the Video/Audiocable to connectto the Video/Audioinputjacks on your television. You can also use as audio output terminal when Componentor S-Video is connected. DVDNCR Output @ 5 6 7 8 RF IN (FROMANT,) Connectthe RF Antennacable to your DVDVCR. S-VIDEO OUT Use the S-Videocable to connect this jack to the S-Video input jack on your television for higher picture quality.You can use as audio output terminal when Componentor S-Video is connected. DIGITALAUDIO OUT (COAXIAL) - Use a Coaxial digital cable to connectto a compatible Dolby Digital receiver. - Use a Coaxial digital cable to connectto an AN Amplifierthat containsa Dolby Digital, MPEG2 or DTS decoder. RF OUT (TO TV) Connect your DVD-VCRto a TV. Chart Type of Connection DVD Output Jacks VCR Output Jacks S-VIDEOOUT 0 X COMPONENTVIDEOOUT 0 X AUDIO OUT (L,R) O X DIGITALAUDIOOUT (COAXIAL) O X LINEOUT (AN) RF OUT O O O O O :Active. X :Inactive. Notes [] Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the TV's menu system. [] If Component (Progressive Scan) Output is selected in AIt Video Out menu, Video and S-Video will not work. [] See pages 61 ~ 62 to get more information on how to use the AIt Video Out menu. ENG-11 I I SETUP Tour of the Remote Control 14 VCR button Use to operateVCR 15 DVD button Use to operate DVD 16 F.ADV/SKIP/INPUTSEL. button Pressto advance play one frame at a time (DVD and VCR). Pressto fast forward a video tape (VCR). Press to select a external signal source. POWER button Press to turn the DVD-VCR on and off. 2 3 4 5 6 NUMBER Buttons AUDIO button Use this button to access various audio functions on a disc. (DVD) 144 Skip button Press to reverse skip a disc. Use to skip a title, chapter or track on a disc. REC button Press to begin recording. (VCR) _ Search button Press to reverse search a disc. 17 _1 Skip button Pressto forward skip a disc. Use to skip a title, chapter or track on a disc. PROGRESSIVE/SPEED button Pressto select progressive scan mode (DVD). Press to select the tape recording speed (VCR). _ Search button Pressto forward search a disc. 7 m (STOP) button Press to stop a disc/video tape during play or record (VCR). 8 MENU button Brings up the DVD-VCR player's menu. 9 ENTER/A T-,t_/Channel /Tracking A or T buttons This button functions as a toggle switch. Press to change channels (TV). Press to adjust tape tracking (VCR). 10 DISC MENU button Brings up the Disc menu. (DVD) 11 SUBTITLE button Press to display the subtitle language name abbreviationon screen. 12 TV/VCR button Press to switch between TV and VCR mode. 13 MODE button Use to selectthe program or random play. REPEAT button Allows you to repeat play a title, chapter,track, or disc. (DVD) m® ENG-12 20 _||(Play/Pause) button Pressto play or pausethe disc/video tape. RETURNbutton Returnsto a previous menu. CLEAR button Use to remove menus or status displaysfrom the screen. 23 INFO. button Displaysthe current disc mode. (DVD) 24 MARK/SEARCH button Pressto memorizescenes for replay. (DVD) Displaysthe VCR Function menu. (VCR) 25 ANGLE/TIMER button Use to access various camera angles on a disc (DVD). Displaysthe Timer Programmenu (VCR). CONNECTIONS Connecting the Antenna Cable There are severalways to connect your DVD-VCR Select one of the following antennaconnections that best suits you below. [] Method 1 :Antenna + DVD-VCR + TV: No Cable box [] Method 2: Antenna +Cable box + DVD-VCR + TV: Cable box with many scrambled channels [] Method 3: Antenna + DVD-VCR + Cable box +TV: Cable box with a few scrambled channels If you are usingan off-air antennathat has 300-ohm twin flat leads, use an external antennaconnector (300-75 ohm adaptor: not supplied)to connectthe antennato the DVD-VCR. If you havetwo separateantennas (one VHF and the other UHF), use a UHFNHF combiner-adaptor(availableat most electronics shops) to connectthe antennato the DVD-VCR. The RF OUT(TOTV) jack of this product sends signals received throughthe antenna and also outputsAudioNideo signals. Method1 : Antenna + DVD-VCR + TV: No Cable box You can [ecord non-scramb!edchannels by se!ectingthe channelon the DVD-VCR Also use this Method ifyou watch channe!s without cable box. ......................................... .................. ,,1 ................................ I, IN J OUTRF To RF OUT Antenna cable To Antenna Input ENG-13 I Method2: scrambled I CONNECTIONS Antenna + DVD-VCR + TV: Cable box with many channels You can record channelsby selecting thechannel on thecable box. You cannot record one channel while watchinganother channel. Be sure that the cable box is turned on. .................................... _wa, _ _ _ Cable Box To RF IN IN (FROM AN%) OUTRF To RF OUT Antenna cable ToAntenna Input Method3: scrambled Antenna + DVD-VCR + TV: Cable box with a few channels Wall You can record non-sc[amb!edchannels by selecting the channelon the cable box: You cannot record scrambledchannels that requi[e a cable box: Nl (FROMANT.) ToRFIN OUT RF (TOTV} To RF OUT Cable Box TV Antenna cable To Antenna Input ENG-14 I CONNECTIONS Before Connecting the BVB-VCB Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables. Refer to the user's manual of the additional components (such as a TV) you are connecting for more information on those particular components. Connection to a TV The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other components. Connection to a TV (Video) Using video/aud!ocab!es,connect the VIDEO (yellow)/AUDlO (red and white)OUT terminals on the rear of the DVD-VCRto the VIDEO (yellow)/AUD!O (red and white ) !N terminals IFROMANI,} OT S-VIDEOOUT RF ffOTV1 ® 2 Yellow Turn on the DVD-VCR and TV. 3 Press the input selectoron your TV remote control until the Video signal from the DVD-VCR appearson the TV screen Notes Noise may be generated if the audio cable is placed too close to the power cable. If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20). The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV. If there is one audio input terminal on the TV, connect it to the LINE OUT AUDIO OUT Left (white) terminal of the DVD-VCR. If you press the RSCAN button when DVD-VCR is in stop mode or no disc is inserted, the AIt Video Out mode changes in the following sequence: (S-Video - Interlace - Progressive) When the AIt Video Output in Display setup menu is set to Progressive, the S-Video Outputs do not work. ENG-15 I I CONNECTIONS Connection to a TV (S-Video) Connectingto your TV usingan S-Videocable. You will enjoy high quality images.S-Video separatesthe picture element into black and white(Y) and color(C) signals to present clearer images than regularvideo input mode. (Audio signals are deliveredthrough the audio out or line out audio). 1 Using an S-Videocable (not included), connect the S-VIDEO OUT terminal on the rear of the DVD-VCRto the S-VIDEO IN terminal of your TV. IN 2 COP,_PONENF LIN£ _ Using the audio cables, connectfrom the AUDIO OUT or LINE OUT AUDIO (red and white) terminalson the rear of the DVD-VCRto the AUDIO (red and white) IN terminalsof your TV. White LINE [FROMAN1,) Red Turn on the DVD-VCR and TV. S-Video Cable (not included) 3 With the unit in stop mode, set the Alt video output to S-Video in the Display Setup menu (see pages 61~62) or press the PROGRESSIVE button on the remote control until S-Video is output. I EO IN Press the input selectoron your TV remote control until the S.Video signal from the DVDVCR appears on your TV Screen. Notes If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20) The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV. The S-Video jack only outputs video from the DVD player. To view video from the VCR, you must have the Video Out (Yellow) or RF Out jack connected. You can hear sound from LINE OUT AUDIO or AUDIO OUT (red and white) terminals for S-Video connection. VCR audio only outputs through the Line Out Audio jacks (Red,White). ENG-16 I CONNECTIONS Connection to a TV (Interlace) Connectingto yourTV using Componentvideo cables. You will enjoy high quality and accurate color reproduction images.Componentvideo separatesthe picture element into black and white(Y),btue(PB),red(PR)signals to present clear and clean images. (Audio signals are deliveredthrough the audio out or line out audio). 1 Using componentvideo cables (not inctudedJ. connectthe COMPONENTVIDEO OUT terminal on the rear of the DVD-VCRto the COMPONENT IN terminal of yourTV. 2 Using the audio cables, connectfrom the AUDIO OUT or LINE OUT AUDIO (red and white) terminals on the rear of the DVD-VCRto the AUDIO(red and white) IN terminals of yourTV. ® U Wh'telt @ed Turn on the DVD-VCR and TV. - 3 O'u° 0,ooab,e Ico,nponen, cab,e A (not included) With the unit in stop mode. set the AIt video output to Component: Interlace in the Display Setup menu (see pages 61~62) or pressthe PROGRESSIVEbutton on the remote control until Interlace is output. 4 Press the input selectoron your TV remote control until the Componentsignalfrom the DVDVCR appears on the TV screen. Notes If Video output is incorrectly red. set to S-Video with the Component cables connected, the screen will turn If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20) The component terminal of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "PR, PB, Y" depending on the manufacturer. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV. The Component Video Out jacks only output video from the DVD player. To view video from the VCR, you must have the Video Out (Yellow) or RF Out jack connected. You can hear sound from LINE OUT AUDIO or AUDIO OUT (red and white) terminals for Component connection. VCR audio only outputs through Line Out Audio jacks (Red,White). ENG-17 I I CONNECTIONS Connection to a TV (Progressive) 1 Using componentvideo cables [not included). connectthe COMPONENTVIDEO OUT terminal on the rear of the DVD-VCRto the COMPONENT IN terminal of your TV. J ] 2 Using the audio cables, connectfrom the AUDIO OUT or LINE OUT AUDIO (red and white) terminalson the rear of the DVD-VCRto the AUDIO (red and white) IN terminals of your TV. Whlte Turn on the DVD-VCR and TV. 1 _Red _I reen'CJ4 JA ,ooab,e ComponentCable 3 Z With the u nit in stop mode, set theAIt video output to Component: Progressivein the Display Setup menu (see pages61~62) or press the PROGRESSIVEbutton on the remote control ProgresiveScan mode prompt screen appears. Then press ENTERand progressivewill be output. (no[ incluaea) 4 Press the input selectoron your TV remote control until the Component signal from the DVD-VCR appearson the TV screen. To see the progressivevideo output, -Depending on your TV,the connectionmethod may differ from the illustrationabove, Note What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality. The Component Video jacks only output video from the DVD player. To view video from the VCR, you must have the Video Out (yellow) or RF Out jack connected. ENG-18 I CONNECTIONS Connection Connection to to an an Audio Audio System System (2 Channel Amplifier) 1 Using the audio cables, connectthe (LINE) AUDIO (red and white) OUT terminalson the rear of the DVD-VCRto the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cabb(s), connect the VIDEO,S-VIDEO or COMPONENT OUT terminals on the rear of the DVD-VCRto the VIDEO,S-VIDEO or COMPONENTIN terminal of yourTV as describedon pages15 to 18. [ S-VIDEOOUT ® Red White Audio Cable 3 Turnon the DVD-VCR,TV, and Amplifier. 2-channel Stereo Amp. 4 Press the inputselect button of the Amplifier to selectthe E×ternal input in order to hear sound from the DVD-VCR. Refer to yourAmplifier's user manualto set the Amplifiers audio input Notes Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears, Please set the audio in the menu screen according to the Amplifier. (See pages 59 to 60) The position of terminals may vary depending on the Amplifier. Please refer to your Amplifier's user manual. You can also connect the amplifier using AUDIO OUT (red and white) terminals from the DVD-VCR. ENG-19 I I CONNECTIONS Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 Using a coaxial cable (not included),connectthe DIGITALAUDIO OUT (COAXIAL)terminal on the rear of the DVD-VCRto the DIGITALAUDIO IN (COAXIAL) terminal of the Amplifier. 2 Using the video signal cable(s),connect the S-VIDEO or COMPONENTOUT terminalson the rear ofthe DVD-VCRto the S-VIDEO or COMPONENTOUT terminal of your TV as described on pages 15 to 18. S-VIOEOOUT ® Coaxial Cable (not included) 3 Turn on the DVD-VCR.TV. and Amplifier. o,o,2:'o,o,. 4 Dolby digital or DTSAmp. Press the input select button of theAmplifier to select external input in order to hear sound from the DVD-VCR. Refer to yourAmplifier's user manualto set the Amplifiers audio input Notes When you connect the DVD-VCR to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound. Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. Please set the audio in the menu screen according to the Amplifier. (See pages 59 to 60) The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier. ENG-20 I CONNECTIONS Connecting a Power Cord & Auto Setup 1 Your DVD-VCR'spower cord should be plugged into a standard 120V/60Hzwall outlet. Avoid pressingany buttonson the remote control or on the unit during Auto Setup. While your DVD-VCR is runningAuto Setup, "Auto" will blink. When Auto Setup is complete, the current time will be displayed on the front panel. If Auto Setupfails to locate a channel to set the clock, you should set the clock manually.(See pages23 to 24.) You must connected 2 Turn on the power by pressing the POWER I on the front button on the remote control or 40/I panel. Turn on your -I-Vby pressingthe POWER button on the TV remote control. Pressthe input selectoron your TV remote until the signalfrom the DVD_VCRappears, ENG-21 have the antenna/cable for the Auto Clock to set INITIAL Selecting SETUP a Menu Language Tochange the on-screen MENUlanguage to English, French or Spanish, follow these steps. 1 Press the MENU button. 2 Press the A/T buttonsto select Setup, then press the P,or ENTER button. 3 Press the A/T buttonsto select Language, then press the _ or ENTERbutton. 4 Press the A/T buttonsto select the appropriate language : English, Fran(_als or EspaSol. Press the ENTERbutton. 5 Press the MENU button to exit. ENG-22 I INITIAL Setting the SETUP Clock This menu is used to set the current time. You need to set the time to use timer recording. Setting the Clock Automatically 1 Press the MENUbutton. 2 Press the A/T buttonsto select Setup, then press the or ENTERbutton. 3 Press the A/T buttonsto select Clock. then press the or ENTERbutton. Notes You must have the antenna connected to set the Auto Clock. (See pages 13-14) The Clock will be automatically set when you turn off the DVD-VCR. 4 Press the A/T buttonsto select Auto Clock. then press the _- or ENTER button. 5 Select a channel that carries a time signal by using the D,-or ENTERbutton. (Auto, 1,2 ...... 125) ENG-23 I INITIAL SETUP I Press the AiT buttonsto select Time Zone, thenpress the _ or ENTERbutton. select the t!mezone of you[area by usingtheA/Ti41/I_ buttons,thenpressthe ENTER button. SelectAutomatic to set the time zoneautomatically, P[ess the A_T buttonsto select Daylight Saving, then press the _or to select Yes, No Note If your clock is set to the wrong Time Zone or Daylight Saving, you can adjust these settings without turning off the Auto Clock Set function. Setting the Clock Manually If Auto Setup fails to set the DVD-VCR'sinternal clock by locating a local TV station, follow these stepsto set the data and time manually. Note: For accurateTimer Recording,your DVD-VCR'sinternalclock must be set correctly. ENG-24 I INITIAL SETUP 2 Press the A/T buttonsto select Setup, then press the I_ or ENTERbutton. 3 Press the A/T buttonsto select Clock, then pressthe or ENTERbutton. 4 Press the A/T buttonsto select Manual Clock. then press the _ or ENTERbutton. 5 Use the 4/!1_ buttonsto select each of the following options, then use the A/T buttonsto set each option. Press the ENTERbutton to set the clock. 6 Press the MENUbutton to exit. ENG-25 I INITIAL Memorizing Selecting the SETUP the Video I Channels Signal-source This feature allows you to manually set the DVD-VCR'stuner band to Antenna or Cable, whicheveryou connectedto the Antenna Injack during initial setup. Use this settingonly if Auto Setup detectedthe incorrecttuner band, i.e. channels are coming in on the wrong channel numbers. 1 Press the MENU button. 2 Press the A/T buttonsto select Setup, then press the I_or ENTER button. 3 Press the A,/T buttonsto select Channel. then press the or ENTER button. 4 - Cable TV: Select this if the DVD-VCR is connected to Cable TV. Press the _ or ENTERbutton to select Cable TV or Antenna. - Antenna: Select this if the DVD-VCR is connected to an indoor or outdoor VHF/UHF antenna. ENG-26 I INITIAL Storing Channels SETUP in Memory (Automatic Method) Auto Channel Memorywill automaticallyseek and store all active channels in your area. selectAuto Chart! then button. The DVD-VCRwill automaticallysearch for all available channels in the selected tune[ band. .... This PrOcedurem minutesto comp!ete. When finished, the !0west channelfound wil! be disp!ayed, Adding and Note ......................................... Erasing Do not turn the power off when Auto Channel Memory function is proceeding. If the power is off, Auto Channel Memory should be reset. Channels (Manual Method) Use this feature if Auto Channel Search misseda channel that you would like to add, or to delete a channel you wish to remove. 6 Press the ,_/T buttonsto select Channel Add/Delete. then press the _ or ENTER button. 7 Press the OH A/T buttons to tune in the channel number you wish to add or delete. Use the number button to selectthe channel directly. • Press the _ or _ button to deletethe channelfrom your channe_list or to add. Repeat steps 7 to add or to deleteadditional channels. Note Use the number button to move the channel directly. Pressthe MENUbutton to exit. ENG-27 I INITIAL Selecting the SETUP I RF Output Channel Use this feature if the DVD-VCR is connectedto your TV usingthe RF antenna cable. 1 Press the MENU button. 2 Press the A/_' buttonsto select Setup, then press the or ENTER button. 3 Press the A/_' buttonsto select Channel, then press the _- or ENTER button. 4. Press the A/T buttonsto select RF Output OH. then press the _ or ENTER button to select 3OH or 4OH. 5 Press the MENU button to exit. ENG-28 I INITIAL Selecting SETUP the Front Panel Display You can set the Front Panel Displayto be bright all the time, dim all the time, or to automaticallydim during poweroff. 1 Press the MENUbutton. 2 Press the A/T buttonsto select Setup, then press the Por ENTERbutton. 3 Press the A/T buttonsto select Front Display, then press the _ or ENTERbutton to select Auto. Bright or Dim. 4. Press the MENUbutton to exit. Auto: Front Panel Display will dim automatically during power off. [] Bright: Front Panel Display will be bright all the time. [] Dim: Front Panel Display will be dim all the time. ENG-29 I INITIAL Setting the SETUP Power I Off Automatically This feature automaticallyturns off your DVD-VCRif no signal is receivedand you do not press any buttons for the selected time. 1 Press the MENU button. 2 Press the A/T buttonsto select Setup, then press the bor ENTER button. 3 Press the A/T buttonsto select Auto Power Off, then press the _ or ENTER button to select Off, 1Hr or 2Hr. 4 Press the MENU button to exit. [] Off: Auto power off is disabled. [] 1Hr: DVD-VCRwill auto shut off 1 hour after the last button is pressed or no signal is received. [] 2Hr: DVD-VCRwill auto shut off 2 hours after the last button is pressed or no signal is received. ENG-30 DVD Playing Before OPERATIONS a Disc Play Turn on your TV and set it to the correctVideo Input on yourTV's remote control. If you connected an externalAudio System,turn on yourAudio System and set it to the correct Audio Input. Playback 1 J fJ Pressthe OPEN/CLOSE(m,) button on the front panel. 2 Place a disc gently into the tray with the disc's label facing up. 3 Press the _ll (Play/Pause) button on your remotecontrol or on the front panel. Most discs will start to play back as soon as the tray closes. _1 Stop/Resume Press the [] (Stop) button once to stop playback.To resume the DVD/CDfrom the point wherethe disc stopped,press the Hm (Play/Pause)button. Press the [] (Stop) button twice to completely stop playback. The next time you press the Hi (Play/Pause), the disc will start over from the beginning. ENG-31 I DVD I OPERATIONS _ql - Screen stops, no sound. To resume,press the _11 (Play/Pause) button once again. Note If the player is left for about 5 minutesin pause mode, it will stop. i ¸ : : Eachtime the button is pressed,a new frame will appear. No sound is heard during STEP mode. Pressthe _-N(Play/Pause)button to resume normalplay. You can only perform step motion play in the forward direction. : No sound is heard during slow mode. Pressthe _N(Play/Pause)button to resume normalplay. Reverseslow motion play will not work. Note This ( _ ) icon indicates an invalid button press. 8 Removing Dis c Press the OPEN/CLOSE(A)J butt°n °n the front pane! II _ ENG-32 I DVD Using the OPERATIONS Search and Skip Functions During play, you can search quicklythrough a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track _,9 If you want to search at a faster speed During play, press the _ t_-_ {_ea n) uuttonsontne remote 5T _ _ on the DVD or CD, press the button. A_ _ DVD control. @ Continuous Search @ Mode During play, press and hold the ,q4/_,€_(Search)buttons on your remote cont[o! oron the front panel The picture wil! search backwardor forward at the 4X speed. If you releasethe_/_'_ (Search)buttons, the picturewi!! go back to playbackmodel Skipping Tracks When playing a DVD, if you press the _ (Skip) button, it movesto the next chapter. If you press the 144 (Skip) button, it movesto the beginningof the chapter. One more press makesit move to the beginningof the previous chapter. ENG-33 2X, 8X, 32X, 128X CD 2X, 4X, 8X Notes The speed marked in this function may be differentfrom the actual playbackspeed. Nosound is heard during search mode (ExceptCD). I DVD Using When the Playing I OPERATIONS Display Function a DVD/CD/MPEG4 You can select information in the DVD Functionmenu by pressingthe MENU button. 1 During play, press the INFO button on the remote control. 2 DVD Press the A/T buttonsto select the desired item. CD MPEG4 _,9 You may use the number buttonsof the remote control to directlyaccess a title, chapter or time to start the playback from a desired time. ENG-34 I DVD OPERATIONS 4 To exit the menu, press the INFO button again. Note To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to tracks on an audio CD). Allows playback of the film from a desired time. You must enter the starting time as a reference. The time search function does not operate on some discs. Refers to the film's soundtrack language. In the example, the soundtrack is played in English 5.1CH. A DVD disc can have up to eight different soundtracks. The MP3, AC3 and WMA are supported. (DivX) Refers to the subtitle languages available in the disc. You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen. A DVD disc can have up to 32 different subtitles. (DivX) File Size has a relationship with resolution of a title. The larger file size is, the higher resolution is displayed. If the file resolution is small, it scales up automatically. So you can see the larger screen. ENG-35 I DVD Using the I OPERATIONS Disc and Title Menu (DVD) _,9 MENUbutton can be usedto access Discand title menus on a DVD during playback. 1 During playbackof a DVD disc. press the MENU button on the remote control. 2 Press the A/T buttonsto select Function. then press the D,-or ENTERbutton. 3 Press the A/T buttonsto select DVD Function. then press the _ or ENTER button. Notes 4 Depending on the disc, the Disc Menu or Title Menu may not work. You can also use the Disc Menu by using the DISC MENU button on the remote control. Press the A/T buttonsto select Title Menuor Disc Menu then press the _ or ENTERbutton. Title Menu will only be displayed if there are at least two titles on the disc. The Title Menu works only with DVD. ENG-36 I DVD Using the OPERATIONS Function Menu (DVD) _,9 MENU button can be usedto access DVD functions such as Information, Zoom, Bookmark, Repeat and EZ view menu during DVD playback. Press tee /_' BUttonsto se!ect Function; then press the _or ENTERbutton. Press the A/T buttonsto select DVD Function then press the oi ENTERbutt0nl . Information (See pages 34 to 35) _,9 You can also directly select these functions usingtheir respective buttons on the remote control. INFO MARK REPEAT Press the i/T t select oneof the five functions: Then press the 1_ or ENTER button to access the function. ENG-37 I DVD Repeat I OPERATIONS Play Repeat the current track, chapter,title, a chosen section (A-B), or all of the disc. When playing a DVD/CD 1 During play, press the REPEAT button on the remote control. Repeat screen appears. 2 DVD repeats play by chapter or title, and CD repeats play by track or disc. Chapter: repeats the chapter that is playing. Title: repeats the title that is playing. Track: repeats the track that is playing. Disc: repeats the disc that is playing. A-B: repeats a segmentof the disc that you select. DVD Press the 4/_ buttonsto select Chapter. Title or A-B. then press the ENTER button. To returnto normal play, press the REPEAT button again, then press the 4 buttons to select Off and press ENTERbutton CD CD Press the CLEAR button n order to stop repeat p!ay. .................................................................................. ENG-38 Note - Dependingon a disc, the Repeatfunction may notwork. I DVD Using the A-B OPERATIONS Repeat function 1 During play, Dressthe REPEAT button on the remote control. Repeat screen appears. 2 DVD Press the 4/1_ buttonsto selectA-. ___,,_ CD 3 DVD Mark the Starting Point ,.-_ ......... Press the ENTERbutton at the beginning of the segment you want to repeat(PointA). CD Onceyou select point A, B will be selected. __'__ _-.__ Note The minimum A -B Repeat time is 5 seconds. 4 Mark the Ending Point Press the ENTERbutton again at the end of the segmentyou want to repeat (Point B). The segmentwill begin repeatingin a continuous loop. 5 Cancel A-B Repeat Press the REPEATbutton, then press the _/D,- buttons to select Off and press ENTERbutton. DVD :,1 CD _:_,m DVD CD ENG-39 I DVD Slow I OPERATIONS Repeat Play This feature allows you to slowly to repeat scenescontaining sports, dancing, musicalinstrumentsbeing played etc., so you can studythem more closely. When playing a OVO _s,vE_ _...... Continuous Slow Mode iiiiiii_i!; ,i_,, __ ....... _iiiiiiiiii!i!i!ii!i!ii ¸¸_'¸ i!!!_!i_i:!_!!ii!! ¸ "_J _'J -In still mode press and hold the _-_ : ........ button for! second.The picture will forward search at the 112Xspeed. i2 Press the (Forward) button to choose the p!ay speed STO_ between 1/8 t/4 and 1/2 of n0[ma! duringPAUSE or STEP model _LAY MEN° If yOUrelease the_ (search)button, the picturewi!! go back to stil! model @ Note - You cannot search backward in continuous slow mode. 3 Press the REPEAT button on the remote control. Press the 4/_ buttonsto select A-. 4 Press the ENTERbutton at the pointwhere you want repeat playto start (A). B is automaticallyselected. Press the ENTERbutton at the pointwhere you want the repeat play to stop (B). _1 To set A-B repeat, set (A) first. then set (B) after the following slow play time has elapsed: 1/8x:wait 40 seconds,then press B 1/4x:wait 20 seconds,then press B 1/2x:wait 10 seconds,then press B _1 The disc will play from A to B repeatedly at the speedyou chose. _ To returnto normal p_ay, press the REPEAT button. then press the _1,/_,.buttons to select Off and press ENTERbutton. ENG-40 DVD Adjusting OPERATIONS the Aspect Ratio (EZ View) Set the aspect ratio (lengthx width) of your TV screen so the DVD-VCRwill display movies at the appropriate size for your television. To Playback using Aspect Ratio (DVD) _,9 The EZ View feature is not available when the A-B Repeat function is activated. Press the EZ VIEW button on the fr0nt panei. , The screen size changes when the button is p[essed repeatedly` -The sc[een zoom mode operates differently depending on the screen setting in the Disp!ay Setup menu. To ensurecorrectoperation of the EZ VIEW button;yOU should set the correct aspectratio in the Display Setup menu. (See pages 61 to 62). If you are using a 16:9 _,,@ o_ _ _ -.----_ _ ,_l .... TV For 4:3 aspect ratio discs - NORMALWIDE For 16:9 aspect ratiodiscs - WIDE SCREEN Displaysthe contentof the DVD title in 16:9 aspectratio. Displaysthe content of the DVD title in 16:9 aspect ratio. The picturewill look horizontally stretched. - SCREEN FIT The top and bottom portions of the screen are cut off. When playinga 2.35:1 aspect ratio disc, the black bars at the top and bottomof the screen will disappear.The picture will look vertically stretched. (Dependingon a type of disc. the black bars may not disappearcompletely.) - ZOOM FIT The top, bottom, left and right of the screen are cut off and the central portionof the screen is enlarged. - SCREENFIT The top and bottom portions of the screen are cut off and the full screen appears. The picture will look vertically stretched. - ZOOM FIT Thetop, bottom, left and right portions of the screen are cut off and the central portion of the screen is enlarged. - ENG-41 VERTICAL FIT When a 4:3 DVD is viewed on a 16:9 TV. black bars will appear at the left and right of the screen in order to prevent the picture from looking horizontallystretched. l DVD If you are using I OPERATIONS a 4:3 TV For 16:9 aspect ratio discs - 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen. - 4:3 Pan Scan The left and right portions of the screen are cut off and the central portionof the 16:9 screen is displayed. - SCREENFIT The top and bottom portions of the screen are cut off and a full screen appears. The picture will lookvertically stretched. For 4:3 aspect ratio discs - NORMAL SCREEN Displaysthe content of the DVDtitle in 4:3 aspect ratio. - SCREEN FIT The top and bottom portions of the screen are cut off and the full screen appears.The picture will lookverticalJystretched. - ZOOM FIT The top, bottom, left and right portions of the screen are cut off and the central portionof the screen is enlarged. - ZOOM FIT The top, bottom, left and right of the screen are cut off and the central portionof the screen is enlarged. Note This function may behave differently depending on the type of disc. ENG-42 I DVD Selecting OPERATIONS the Audio Language You can select a desired audio languagequickly and easily with the AUDIO button. Using the AUDIO button (DVD/CD/MPEG4) Notes 1 To change the desired audio in the Disc Menu, press the DISC MENU button. This function depends on what audio languages are encoded on the disc and may not work on all DVDs. A DVD disc can contain up to 8 audio languages. To have the same audio language come up whenever you play a DVD, see pages 57 to 58. During play, press the AUDIO button. Audio languageschange when the button is pressed repeatedly. The audio languagesare representedby abbreviations. When playinga CD, you can select among Stereo. Right or Left. DVD CD _ MPEG4 Press the _/!_ buttonsto selectthe desiredAudio on a MPEG4then press the ENTER. 2 To remove the AUDIO icon. press the AUDIO. CLEAR or RETURNbutton. ENG-43 I DVD Selecting I OPERATIONS the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE button. Using the SUBTITLE button (DVD/MPEG4) Notes 1 To change the desired subtitle in the Disc Menu, press the DISC MENU button. This function depends on what subtitles are encoded on the disc and may not work on all DVDs. During play, press the SUBTITLE button. The subtitle changeswhen the 4/_- button is pressed repeatedly. A DVD disc can contain up to 32 subtitle languages. To have the same subtitle language come up whenever you play a DVD, see pages 57 to 58. The subtitle languagesare representedby abbreviations. MPEG4 Pressthe 4/_ buttons to selectthe desiredsubtitle language on a MPEG4then press the ENTER. 2 To removethe SUBTITLE icon. press the SUBTITLE. CLEAR or RETURNbutton. ENG-44 I DVD Changing OPERATIONS the Camera Angle When a DVD contains multiple angles of a particular scene, you can usethe ANGLEfunction. Using the ANGLE button (DVD) If the disc contains multiple angles, the ANGLE appearson the screen. 1 Press the ANGLE button. then the ANGLE iconwill appear with the current angle numberand the nutuberof angles available. Note 2 If the disc has only one angle, this feature won't work. Currently, very few discs have this feature. 4/6 Press the 4/_ button repeatedlyto select the desiredangle. To remove the ANGLE icon. press the CLEAR or RETURNbutton. Using the Bookmark Function This feature lets you bookmark sectionsof a DVD so you can quickly find them at a latertime. Using the MARK button (DVD) During play, pres_ button on the remote control. Note Depending on a disc, the Bookmark function may not work. Whenyou reach the scene you want to mark, press the ENTER button. Upto tl" scenesmay be marked at a time. ENG-45 I DVD Recalling I OPERATIONS a Marked Scene 1 During play, press the MARK button on the remote control. 2 Press the 4/1_ buttons to select a marked scene. 3 Press the _-II(PlaytPause) button to play the marked scene. Clearing a Bookmark During play, press the MARK button on the remote control. ENG-46 I DVD Using the OPERATIONS Zoom Function (DVD) 1 Duringthe playbackof a DVD disc. press the MENU button on the remote control. 2 Press the A/_r buttonsto select Function. then press the D,-or ENTER button. 3 Press the ,&/T buttonsto select DVD Function. then press the _ or ENTERbutton. Press the A/T buttonsto select Zoom; thenpress the i_-or ENTER button. / During DVD play, press ENTERto zoom in 2X/4X/2X/Normatin order. Press the A/T or 4/P,buttonsto se!ect the part of the sc[een yOu want to / zoom inon. _/ Press the ENTERbutto_ __ ¢" \... Note Depending on a disc, the Zoom function may not work. ENG-47 I DVD Clips Menu I OPERATIONS for NIP3/WIVIA/JPEG/NIPEG4 Discs with MP3/WMA/JPEG/MPEG4contain individualsongs and/or picturesthat can be organized into folders as shown below. They are similar to how you use your computerto put files into differentfolders. 1 Open the disc tray. 2 Placethe disc on the tray. 3 Close the tray. The tray closes and this screen displays. Parent Folder Folders and Files Current Folder an(] Peer Folders in Current Folder - _ Name of currently playingfile. •MP3 file icon. - | Current PlaybackTime. •WMA file icon. - : Current PlaybackMode There are four modes.They can be selected in order by pressingthe REPEATbutton. - Off: Normal Playback - Track: Repeatsthe current track. - Folder: Repeatsthe current folder. - Random:Files in the disc will be played in random order. Folder _: JPEG file icon. AVl file icon. "Folder icon. •Current Folder icon. Selection The folder can only be selected in the Stop mode. To select the Parent Folder Press the RETURNbutton to go to the parent folder, or press the A/¥ buttons to select".." and press the ENTER button to go to the parent folder. To select the Peer Folder Press the 4/1,- buttons to highlightthe left window. Press the A/¥ buttons to selectthe desired folder, then the ENTER button. Root WMA JPEG MP3 Parent Folder I _ __.M_U[I!_;____ _ 1st i ................ 2rid To select the Sub-Folder Press the 4/_ buttons to highlightthe right window. Pressthe A/_' buttons to selectthe desired folder, then press the ENTER button. Sub-Folders i_ i_ SONG MPEG4 ENG-48 FILE FILES 3 Current Fotder I i I ] Peer Folders ] I DVD MP3/WMA OPERATIONS Playback Open thOd sc ray. When a disc or a folder contains both MP3 and WMA files, only one type will be played, not both. butt0ns to selecta s0ng fi!e. P:g_Splaey E_T[_ tbiett°onnt; Repeat/Random playback Duringplay,press the REPEATbutton to change the playbackmode.There are fourmodes. Off. Track. Folderand Random. - Off:Normal Playback - Track: Repeatsthe current songfile. - Folder: Repeatsthe songflles which have the same extensionin thecurrentfolder. - Random:Songflleswhich have thesame extension will be played in random order. To resumenormal play,press the CLEARbutton. ENG-49 l DVD CD-R lVIP3/VViVlA I OPERATIONS file Use a decompressiontransfer rate of at least 64Kbpswhen recordingWMA files. When you record MP3 or WMA files on CD-R, please refer to the following. Sound quality with WMA files basically depends on the rate of cornpresslon/decompressionyou choose. - Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and JolietMP3 or WMA files are compatiblewith Microsoft's DOSand Windows. and with Apple's Mac. This format is the most widely used. Getting CD audio sound requ res an analog/digitalsampling rate. that is conversionto WMA format, of at least 64Kbps and up to 192Kbps. - When namingyour MP3 or WMAfiles, do not Conversety,files with decompression rates below 64Kbps or over 192Kbpswill not be played properly. exceed 8 characters, and enter ".mp3, .wma" as the file extension, General name format : Title.mp3.or Title.wma. When composingyour title, make sure that you use 8 characters or less, have no spaces in the name. and avoid the use of special characters including: (.,/,\,=,+). - Do not try recordingcopyright protected MP3 files. Certain "secured"files are encryptedand code protectedto prevent illegal copying.These files are of the following types: Windows MediaTM (registeredtrade mark of Microsoft Inc) and SDMITM (registeredtrade mark of The SDMI Foundation).You cannot copy such files. - Use a decompressiontransfer rate of at least 128 Kbpswhen recordingMP3 files. Sound quality with MP3 files basicallydepends on the rate of compression/decompressionyou choose.Getting CD audio sound requiresan analog/digitalsampling rate, that is conversionto MP3format, of at least 128 Kbps and up to 160 Kbps. However,choosing higher rates, like 192 Kbpsor more, only rarelygive better sound quality.Conversely,files with decompression rates below 128 Kbps will not be played properly, - Important: The above recommendationscannot be taken as a guaranteethat the DVD-VCRwill play MP3 recordings,or as an assuranceof souna quality. Youshould note that certain technologiesand methodsfor MP3 file recordingon CD-Rs prevent optimal playbackof these files on your DVD-VCR (degradedsound quality and in some cases, inabilityof the playerto read the files). - This unit can play a maximum of 3000 files and 300 folders per disc. ENG-50 I DVD NIPEG4 OPERATIONS Playback MPEG4 Play Function AVI files are used to contain the audio and video data. Only AVI format files with the ".avi" extensions can be played. 1 Open the disc tray. Placethe disc on the tray. Close the tray. 2 Press the A/T or _/l_ buttonsto select an avi file (DivX/XviD),then press the ENTERbutton. Repeat Playback ,Track Repeatsthe track that is p!aying. - Folder ; Repeats the AVl files which have the same extension -A-B ; repeats a segment of the file that you select, ENG-51 I DVD I OPERATIONS MPEG4 Function Description CD-R AVIfile Function Skip (14,_orJ_,l) Description Referencepage During play, press thel4_ or )4_,4button,it moves forward or backward 5 minutes. This unit can play the following video compression formats within the AVl file format: - DivX 3.11 contents Duringplay,presstheSEARCH (_ or _) buttonandpress againto searchat a faster speed.Allows you to search at a faster speed in an AVl file. (2X, 4X, 8X) S!ow Motion Play Allows you to search at a slower speed in an AVl file. (1/8X, 1/4X, 1/2X) Each time the STEP button Step Motion Play is pressed, a new frame wi!! ZOOM - DivX 4 contents (Basedon MPEG4 Simple Profile) - DivX 5 contents (MPEG4 simple profile plus additionalfeatures such as bi-directionatframes. Qpel and GMC are also supported.) - XviD MPEG4compliant Contents. P 32 This unit supportsall resolutionsup to maximum below. P 32 DivX3.11 & DivX4 & XviD DivX5 Bitratemay fluctuate: Devicemay skip decoding the high bitrate portions and begindecodingagain when Bitrate returnsto normal. 720 x 480 @30fps 720 x 576 @25fps : Maximumbitrate :4Mbps appear. 2X/4X/2X/Normal in order P 47 - These functions may not work depending on MPEG4file. Notes Some MPEG4 files created on a personal computer may not be play back. That is why Codec Type, Version and Higher resolution over specification is not supported. This unit supports CD-R/RW written in MPEG4 in accordance with the "1SO9660 format". ENG-52 I DVD Program OPERATIONS Play & Random Play Youcan listen to songs randomlyor in the desired sequence. Up to 20 tracks can be programmed. This function is availableonly with Audio CDs. Program Ray Notes 1 Random Play • With the unit in stop mode, press the REPEAT button. With the unit in stop mode. press the REPEATbutton. - The play mode menu will appear. - The play mode menu will appear. • Press the _ or P,-buttons to select Random, then press the ENTER button. -The disc will be played in random order. 2 Press the 4 or _ buttonsto select PROGRAM.then press the ENTERbutton. - The program play screen will appear. 3 Press the A/T or 4/_ buttonsto select the desired track, then press the ENTER button. - The selectedtrack will be added to the Programorder. - If you delete the track. press the CLEAR button. The track added last will be deletedfrom the Program order. Note if the disc tray is opened during programming, program play will be canceled. • To Cancel Programming - Press the REPEAT button. The program will not be saved and the program screen will disappear. 4 Tofinish programmingand start playback, pressthe Hi button. • To Cancel Program Play - During playback or in Stop mode, press the CLEAR button. The disc will be played in programmedorder. ENG-53 I DVD Picture I OPERATIONS CD Playback 1 Select the desired folder then press the ENTER button. 2 Press the A/T buttons to select a Picturefile in the cl ps menu. then press the ENTERbutton. iL Notes If no buttons on the remote control are pressed for 10 seconds, the menu will disappear• Press the [] (Stop) button to return to the clips menu. When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu. 3 Pressthe INFO. button to display the menu. Press the 4/_- buttonsto select the menuyou want to view, then pressthe ENTER button. Album Screen _ Slide Show Returnsto the Album Screen. To see the next six picture, press the _ (skip) button. To see the previous six picture,press the _ (skip) button. _ Rotation Before beginning the Slide Show, the picture interval must be set. L=[A-']"q" : Eachtime the ENTER button is pressed, the picture rotates90 degrees clockwise. • When this icon is selectedand ENTERis pressed, the pictures change automatically with about a 6 second interval. Zoom %. The unit enters slide show mode. Pressthe A/T or ,_/_ buttonsto select the part of the screen you want to zoom in on• Pressthe ENTERbutton•Eachtime the •The pictureschange automaticallywith about a 12 second interval• ENTERbutton is pressed,the picture is enlarged up to 4X• (2X -, 4X -, 2X -, Normal) : The pictureschange automaticallywith about a 18 second interval• Notes - Depending on a file size, the amount of time between each picture may be different from the set interval time. - If you don't press any button, the slide show will start automatically in about 10 seconds by default. ENG-54 DVD CD=R JPEG OPERATIONS Discs - Only files with the ".jpg" and ".JPG" extensionscan be played. - If the disc is not closed, it will take longer to start playingand not all of the recordedfiles may be played. - Only CD-R discswith JPEG files in ISO 9660 or Joliet format can be played. - The name of the JPEG file may not be longer than 8 charactersand shouldcontain no blank spaces or special characters (. t = +). - Only a consecutivelywritten multi-sessiondisc can be played. If there is a blank segment in the multisession disc. the disc can be played only up to the blank segment. - A maximum of 3000 images can be stored on a single CD. - Kodak Picture CDs are recommended. - When playinga Kodak Picture CD. only the JPEG files in the picturesfolder can be played. - Kodak Picture CD:The JPEG files in the picturesfolder can be playedautomatically. - Konica Picture CD: If you want to seethe Picture.select the JPEG files in the clips menu. - Fuji Picture CD: If you want to see the Picture,select the JPEG files in the clips menu. - QSS PictureCD: The unit may not play QSS Picture CD. - If the number of files in I Disc is over 3000, only the first 3000 JPEG files can be played. - If the numberof folders in 1 Disc is over 300, onlyJPEG files in the first 300 folders can be played. ENG-55 I DVD Using the I OPERATIONS Setup Menu The Setup menu lets you customizeyour DVD-VCRby allowing you to select various language preferences, set up a parentallevel, even adjust the playerto the type of television screen you have. 1 With the unit in Stop mode, press the MENUbutton on the remote control. 2 Press the A/T buttonsto select DVD. then press the D,-or ENTERbutton. O Language:Setup of the Language. OAudio: Setupof the Audio Options. O Display: Setupof the DisplayOptions. Used to select which type of screen you want to watch and several display options. O Parental: Setup of the Parental Level.Allows users to set the level necessary to prevent childrenfrom viewing unsuitable movies such as those with violence,adult subjectmatter, etc. O DivX(R) Registration: Please use the Registration code to register this player with the DivX(R) Video On Demand format. To learn more go to www.divx.com/vod. Note Depending on the disc, some DVD Setup menu selections may not work. ENG-56 I DVD Setting OPERATIONS Up the Language Features If you set the player menu on the OSD disc menu, audio and subtitle language in advance,they will come up automaticallyevery time you watch a movie. With the unit in Step mode, Press the MENUbutton on the remote control. select DVDI then pressthe ! or ENTERbutton. 3 Pressthe A/T buttons to select Language, then press the _ or ENTERbutton. 4 Pressthe ,L/T buttons to select the desired item.then press the D,-or ENTER button. The language is selectedand the screen returns to Language Setup menu. 5 Pressthe A/T buttons to select the desired language, then press the _- or ENTER button. To make the DVD Setup menu disappear,press the MENU button. ENG-57 DVD I Language I OPERATIONS Function select "Others" if the languageyou want is not listed. If the selected language is not recordedon the disc, the original prerecordedlanguage is selected. To set the Disc Menu Languageto :YOU[ preferred language,follow these stepsi If your preferred language is i Disc MenuLanguage wil! aut0matica!!ybe set to !he : !anguageyou choose: : Select "Original"if you want the default soundtrack languageto be the original languagethe disc is recorded in. Audio : Toset the Audio Eanguageto your preferred language: follow these stepslIf your preferred language is languageyou choose. Subtitle Select "Others"if the language you want is not listed. If the selected language is not recordedon the disc, the original prerecordedlanguage is selected. .... Select "Automatic"if you want the subtitlelanguage to be the same as the language selectedas the audio language. : To set the Subtitle Language to your preferredlanguage, follow these steps f your preferred lang automat ca y be set to the anguage you choose. : : : : : ENG-58 Select "Others" if the language you want is not listed. Somediscs may not contain the language you select as your initial language;in that case the disc will use its original Ianguagesetting. I DVD Setting OPERATIONS Up the Audio Options Audio Options allows you to set up sound for usewith your external audio system. 1 With the DVD in Stop mode. press the MENU button on the remote control. 2 Press the A/T buttonsto select DVD.then press the P,-or ENTER button. 3 Press the A/T buttonsto selectAudio. then press the i_ or ENTER button. To make the DVD Setup menu disappear, press the MENU button. 4 Press the A/T buttonsto selectthe desired item. then press the _ or ENTER button. ENG-59 I DVD Audio I OPERATIONS Options Note Digital Output There is no analog audio output when you play a DTS disc. - PCM:Converts to PCM(2CH)audio. Manufacturedunderlicensefrom Dolby Laboratories."Dolby"andthe double-D symbolare trademarksof Dolby Laboratories. "DTS"and "DTSDigitalOut"aretrademarks of DigitalTheaterSystems,Inc. - Bitstream:Outputs Dolby Digitalviathe digital output. Select Bitstream when connectingto a Dolby Digital Decoder.... Note DTS There is no analog audio output when you play a DTS sound disc. Select On when connecting to a DTS Decoder. - Off: Doesn't output digital signal. - On: Outputs DTS Bitstream via digital output. Dynamic compression restrains the dynamic range of the sound, i.e. the difference between the loud and DynamicCompression - On:Whenthemoviesoundtracksareplayedat lowvolumeorfromsmaller quiet passages of a DVD audio track. This is useful when watching a DVD late at night. speakers,thesystemcan applyappropriatecompression to makelow-levelcontentmore intelligible andpreventdramatic passagesfromgettingtooloud. - Off: To select the standard range. Note PCM Down Sampling Even when PCM Down sampling is Off, some discs will only output down sampled audio through the digital outputs. - On: Select this when the Amplifier connectedto the player is not 96KHz compatible. Inthis case. the 96KHz signalswill be down converted to 48KHZ. - Off: Select this when the Amplifier connectedto the player is 96KHz compatible. In this case, all signals wiJ be output without any changes. ENG-60 I DVD Setting OPERATIONS Up the Display Options Display options enable you to set various video functions of the player. 1 With the unit in Stop mode. press the MENU button on the remote control. 2 Press the A/T buttonsto select DVD.then press the _,-or ENTER button. 3 Press the A/T buttonsto select Display, then press the _ or ENTER button. To make the DVD Setup menu disappear, press the MENU button. 4 Press the A/T buttonsto selectthe desired item. then press the D,-or ENTER button. ENG-61 I DVD Display I OPERATIONS Options TV Aspect Dependingon the type of television you have, you may want to adjust the screen setting(aspect ratio). - 4:3 Letter Box: Select when you want to see the total 16:9 ratioscreen the DVD supplies,even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. - 4:3 Pan Scan: Select this for conventionalsize TVs when you want to see the central portion of the 16:9 screen (Extremeleft and right side of movie picture will be cut off.) 16:9Wide: You canview the full 16:9 picture on your wide screen TV. Black Level Note The Black Level feature adjustsblack reference level in the video signalto one of two choices: It cannot be adjusted when AIt Video Out is set to Progressive. - On: This will enhancethe Black Levelfor increased brightnesslcontrastwhen viewing DVDs. - Off: This is the Standard NTSCreference Black Levelfor consistentbrightness/contrastacross all sources. AIt Video Out See your TV owner's manual to determinewhat type of TV you have. Interlace: InterlacedScan mode will work. Progressive:ProgressiveScan mode will work, and Video and S-Video will not work. Press the P-SCAN button on the The "Alt Video Out" option mustbe set in the on-screen menu ifyou haveconnected your DVD-VCRto a TV using the S-VIDEO OUT or COMPONENTVIDEO OUT jacks. - S-Video: Selectwhen you want to use S-Video output. front panel or PROGRESSIVEbutton on the remote control in stop mode. Be sure to set the correctVideo output for the proper picture. - Component: Select when you want to use Component interlace(525i)Out or Progressive(525p)Out. ENG-62 I DVD Setting OPERATIONS Up the Parental Control The ParentalControl function works in conjunctionwith DVDsthat have been assigned a rating, which helps you control the types of DVDsthat your family watches. There are up to 8 rating levels on a disc. 1 With the DVD in Stop mode. press the MENU button on the remote control. 2 Press the A/_' buttonsto select DVD.then press the m,-or ENTER button. 3 Press the A/_' buttonsto select Parental. then _s the _ or ENTER button. 4 Press the D,-or ENTER button to set up passwordif you want to use a password. The Enter Passwordscreen appears. _,q - To make the DVD Setup menu disappear, press the MENU button. 5 Note There is no default password. Enter your password. The Re-enter Password screen appearsto confirm the password. Enter your passwordagain. The player is locked (_). ENG-63 I DVD Setting Up the I OPERATIONS Rating Level 1 With the unit in stop mode, press the MENU button on the remote control 2 Press the AiT buttonsto select DVD. then press the _,-or ENTER button. 3 Press the A!_ buttonsto select Parental, then press the _ or ENTERbutton. Enter your password. 4 Press the A/T buttonsto select Rating Level, then press the I_ or ENTER button. To make the DVD setup menu disappear, press the MENU button. 5 Press the A/T buttonsto select the Rating Levelyou want. then press the _ or ENTERbutton. For example,if you select up to Level 6, discs that contain Level7, 8 will not play. e.g) Setting up in Level 6. ENG-64 I DVD Changing the OPERATIONS Password 1 With the unit in stop mode. press the MENU button on the remote control. 2 Press the A/T buttonsto select DVD.then press the or ENTER button. 3 Press the A/T buttonsto select Parental, then press the 1_or ENTER button. Enter your password. 4 Press the A/_ buttonsto select Change Password. then press the p,-or ENTER button. _,9 - To make the DVD setup menu disappear, press the MENU button. Note 5 Enter your new password. Re-enterthe new password again. If you forgot your password, press power on from a cold start with no disc in the unit. Press the 4_/_,¢,_ (Search) buttons simultaneously on the front panel for 5 seconds. The "Reset OK" message will appear. Press the POWER button. ENG-65 VCR OPERATIONS Inthis chapter,you will learn how to play a video cassette tape, howto usethe time counter and memory stop features, and how to record a programas you are watchingTV. Inserting Tape To Insert and a Video Ejecting Cassette a Video Cassette Tape Don't try to insert a tape upsidedown or backwards. Hold thevideo cassette tape window-sdeup with the arro_ pointing away from you, Gently pushthe tape through _i' '' the compartmentdoor until you • t feel the VCR pul! _ The VCR loads thetape .......... i) automatiCally / /' To Eject a Video Cassette Use only video tapes labeled "VHS." European PALVHS video tapes and S-VHSpre-recordedtapes aren't compatiblewith this unit. Choose brand name, high quality tapes for best results. "-" ' _................................................................................ ' ,' '_: F r / ,._' ',,,, ..t- '_ "_ If the safety tab of your video tape has been removed,the tape begins to play automatically.You don't have to press PLAY.For more information on the safety tab, see page 78. "........i'. ",, \ Tape When you're finished playinga prerecordedvideo tape, it's best to rewind it to the beginningand remove it from the VCR to protect it from wear and tear. -,9 After ejecting a tape, you should remove it completely from the compartmentand turn off the VCR. 2 Press the EJECT button on the front panel to eject the tape ENG-66 I VCR Playing Tape a Pre-Recorded Playing the OPERATIONS Video Cassette Tape For more informationon the safety tab, see page 78. 1 insert the video cassettetape. = l_ _. '\ , " _,t '= ( 2 If the tape doesn't begin to play automatically,press the _ll (PlaytPause)button. The VCR does not play soundwhile a video tape is paused. See "UsingAutomatic Tracking"on the next page. If you see white lines on the screen, see "UsingAutomatic Tracking"on page 69. button to resume playingthe tape_ Note To view VCR playback, you must connect the Video Out (Yellow) or RF Out jack to your TV. The VCR does not output video throught the S-Video or Component jacks. ENG-67 VCR I Special I OPERATIONS VCR Playback Features While a videotape is playing, you can enjoy a variety of special playbackfeatures, including Still, Frame Advance, Skip, Repeat,and more. Press the Play/Pausebutton again to resume normal playback. Frame Advance In the pause mode, press F.ADVto advance to the next frame. Fps/Rps Review buttons to advance the tape forward or backwardat 5 times normalspeed. - Jet Search: Press and hold down the ,q_t _ (SEARCH) buttons, then releaseitto play back at the normalspeed. SKIP In Play mode, press the SKIP button to move ahead exactly 30 seconds. Press the SKIP button repeatedlyup to 4 times to move ahead 2 minutes. Repeat - In Play mode, press the REPEAT button to review the last 5 seconds of tape (SP mode). - In Play mode, press the REPEAT buttonto reviewthe last 15 secondsof tape (SLP mode). ENG-68 I VCR Using OPERATIONS Automatic Tracking The Trackingadjustment removesthe white linesthat sometimes appear during playback because of slight differences in recordingdecks. The TRK button will automaticallyalign the recordedtracks with the playback heads to solve this problem. You may also set tracking manually. Insertand plaYa video cassette tape: As soon as to p!ay,the VCR begins automatic tracking 2 If automatictracking doesn't removethe streaks from the picture,press and hold the CH A TRK or CH T TRK button until the streaks disappear. ENG-69 VCR I Selecting I OPERATIONS the Cassette Type If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted. 1 Press the MENUbutton on the remote control. 2 Press the A/T buttons to select VCR then press the P,-or ENTERbutton. Note 3 This information is usually printed on the tape box. The menu cycles through: T-120, T-160 or T-180. Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the INFO. button. Press the A/_' buttonsto select Tape Length, then press the _ or ENTER button to select the correct cassette length. ENG-70 I VCR Setting OPERATIONS the Auto Play If you want your videotapesto play automaticallywhen you insert them, turn on Auto Play. Note 1 Only tapes that are missing the Record Safety Tab will play automatically when inserted (See page 78). Pressthe MENU button on the remote control. 2 Press the A/_ buttonsto selectVCR. then press the I_ or ENTER button. On: The VCR will automaticallybegin playing a video tape when it is inserted, as long as the safety tab of the cassettehas been removed. 3 Piess the A/T buttons to select Auto Play, then press the I_ or ENTER button to select On or Oft Off: Auto play is disabled. ENG-71 VCR I Setting I OPERATIONS the Auto Repeat If you want your videotapesto play repeatedly,turn on Auto Repeat. 1 Press the MENUbutton on the remote control. 2 Press the A/_ buttons to select VCR then press the b,-or ENTERbutton. On: The VCR will play a tape repeatedly [unless a tape control is activated (stop, fast forward or rewind)]. 3 Press the A/_' buttons to select Auto Repeat. then press the m,-or ENTER button to select On or Off. Off: Auto Repeat is disabled. 4 Press the MENUbutton to exit. ENG-72 I VCR Using the OPERATIONS Tape Counter The tape counter: Indicatesthe elapsedtime in the play and record modes (hours, minutes and seconds). Is reset when a cassette is inserted in the DVD-VCR. Allows you to easily find the beginning of a sequence. If the remainingtime is to be calculatedcorrectly,you must indicate the type of cassettebeing used. 1 nsert a cassette in your DVDVCR. Toset the tape counter to zero at the beginning of a sequence: - Press the INFO. button twice to display the counter - Press the CLEAR button when you want to set the tape counter to zero. 2 Whenyou are ready, - Start playbackor recording. - Press the [] (Stop) button. - Tofast-forwardor rewindto the sequence at which the counter was set to zero, press , the the_,4t _ (Forward)or i_,q/_ (Rewind) buttonson the remote control. - Some DVD-VCR information,such as the counter,can be displayed on the television screen. Pressthe INFO. button: - Onceto display the current function, recordingspeed and counter. - Twiceto display the counter only. - Threetimes to d isplay the time remainingon the cassette. - Four timesto clear the display. ENG-73 VCR I Using the I OPERATIONS Assemble Edit Function This functionallows you to start a new recordingat a specific position on the cassette while maintaining a very smooth scene change. 1 Insert the cassette to be edited in your DVD-VCR. /.-/ \\ 2 Press the _*ll(PlaytPause) button to start playback. 3 When you reachthe position from which you wish to start the new recording, press the _li (PlaytPause)button. 4 Press the F.ADVbutton as often as necessary to advance frame by frame, until the exact recording position is located. 5 While the DVD-VCRis in pause mode. press the REC button. The pausemode is displayed on the screen. ENG-74 I VCR OPERATIONS Select the source from which you wish to record by p[essing: . TheCH A or T button for televisionchannel.. -The INPUT SEL,button for the LIND or LINE2 nput sourcel ..... press the REC button to start recording:When you have finished reco[ding,p [] (Stop)butt0n Selecting the Audio Output Mode You can selectthe mode in which the sound is reproducedon the loudspeakersand AV outputs. The following options are available. Audio output Mode Left :Used to listen to the soundon the left Hi-Fi channel. Right: Used to listen to the soundon the right Hi-Fi channel. Mono:Used to listen to the sound on the normal mono channel. Hi-Fi : Usedto listen to Hi-Fi stereo soundon the left and right channels. When playing back tapes recordedin Hi-Fi,the sound switchesto Hi-Fi after five secondsof Mono. ENG-75 VCR I Searching I OPERATIONS for a Specific Sequence Eachtime you record a cassette on this DVD-VCR,an "index" is automaticallymarked on the tape when recording starts. The Searchfunction allows you to fast-forwardor rewind to a specific index and start playback from that point. Dependingon the direction selected,the indexes are numberedas follows: I ¢ Prev Seq. etc. 2 Seq. being played I I 1 1 Next Seq. etc. 2 This DVD-VCR uses a standard indexingsystem (VlSS).As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa. 1 Press the .ENU _tiOi _i i_e ii::iii 0 ...... 2 Press the A/T buttonsto select Function. then Dress the 1_or ENTERbutton. 3 Press the A/_' buttonsto select VCR Function. then press the D,-or ENTER button. VCR Functioncan be displayed simply by pressing the SEARCH button. 4. Press the A/Y buttonsto select the desired item. then press the _ or ENTER button. ENG-76 I VCR Variable Search OPERATIONS System Go To [0:00:00] Stop Use thisfeature when you want to search for the 0:00:00 counter position on a cassette. Press the CLEAR button al the point on the tape where you want to set the counter to [0:00:00]. The VCR will rewind or fast forward, searchingfor the 0:00:00 counter position,and then automaticallystop at that position. End Search Use this feature when yc want to search for a blank positionto recorda program on a cassette. The VCR will fast forward. searchingfor a blank position. and then automaticallystop at that position. If the VCR reaches the end of the tape during end search. the tape will be ejected. Scan and Play Use scan and play when don't know exactly where a program is located on a cassettetape. - Forward Intro Scan Select "ForwardIntro Scan".then press the ENTER button. - Reverse Intro Scan Select "Reverse Intro Scan".then press the ENTERbutton. ENG-77 VCR I Basic I OPERATIONS Recording You can record a TV show in progress by inserting a blank tape and pressing the REC button. You can even add time in 30-minute increments up to 4 hours by pressing the REC button repeatedly; see page 81. Note Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape. Warning: Do not cover this opening unless you are sure you want to recordover the tape. Before You Begin... Poweron the DVD-VCR Poweron the TV Protecting a Recorded Cassette Video cassettes have a safety tab to prevent accidentalerasure. Whenthis tab has been removed,you cannot record on the tape. If you wish t0 pi0tecta cassette, break off the tab using a sina!!screwdriver_ To re-record over a Protected cassette(safety tab broken), cover the hole with adhesive tape, ............ \ Record Safety Tab Recording Insert a btank VHS tape into the VCR deck. Make sure the tape is !ong enough to record the entire program. Press the SPEED button to set the record Speed. (see page 8o) / (\ , use the Number buttons orthe OH A or T buttonsto select the desired Channe!,or press the INPUT SEL: button to so!oct Line 1 or2if recordingfrom an extema! device connectedto the front or rear jacks, respectively. ENG-78 I VCR OPERATIONS Note _ ......... Pieis ihe REC butto_ on the Recording from the DVD to the VCR is not possible. ii!¸¸ !iiiiiiiiii! EAD Q remote control or front panel. FOr 0ptlons wh!le recordingIS in progress,see ,Spec_a!Recordmg Features"on this pagel II _ii ii_ Special _ _ i_ i ii _ii Recording ii_ i _ _ Features While a recording is in progress,you can watch a different channel or a DVD, or add recordingtime in 30minute increments. To Watch a different Channel while Recording Make sure that you connectthe DVD-VCRto the TV using an RF cable -Whe n you watching through the Antennainputduring recording,press the TV/VCR button on the remote control. Using your -I-Vremote contro!_change the channe!you want to watch. Whenyou watchingthrough Line input during recording, change the input of your TV f[0m Line to Antenna/Using your TV remote control,change the channelyou wantt ° watch. ENG-79 I VCR OPERATIONS 4 While in £ecord mode, press the REC button again to activate One-TouchRecording (OTR}. Record length 0:30 appears on the On-screen displayand the DVD-VCRwill record for exactly 30 minutes. 5 Add RecordingTime Continue pressing REC button to add recordingtime in 30 minute increments up to 4 hours. The DVD-VCRstops recordingautomaticallywhen the time has elapsed.The DVD-VCRwill automaticallybe turned off when the OTR finished. Selecting the Recording Speed You can slow downthe recordingspeed from SP to SLP in order to fit six hoursof programmingon a T-120 tape. Note Press the SPEEDbutton on the remote control to selectthe Record spee& -SP; The selectedRecord Speed will appear on the front panel display and on-screen display. Standard Play,for best -SLP: Super Long Play,for maximum recording time (3 times SP). MaximumRecording Time - SP vs. SLP TapeLength SP (StandardPlay) SLP (Super Long Play) T-120 2 hrs 6 hrs T-160 2hrs 40 mins 8 hrs T-180 3 hrs 9 hrs ENG-81 VCR I Making I OPERATIONS a Timer Recording Inserta blank videotape into the VCR deck. Be sureto leave the Record Safety Tabintact. With the Timer Recordingfunction, you can programup to 7 events at a time to record up to a month in advance. To Begin Settingthe Timer Recording, - PowerOn your DVD-VCR - PowerOn your TV. 1 Press the MENUbutton on the remote control. 2 Press the AiT buttonsto select PROG then press the or ENTERbutton. The Timer ProgramScreen can be displayed simp pressingthe TIMER button. 3 Select Channel Number Press the 1_button, then press the A/T buttonsto set the channel. Press the _ button to move to the next setting. 4. Note You can select external input directly (L1 or L2) using INPUT SEE button. SetTime/Date/Speed RepeatStep3 aboveto set starttime.endtime.date and recordspeed. Datecan be set for onetime. dailyor weeklyrecording. ENG-82 I VCR OPERATIONS Selecting Auto Speed If the length of the videotape is not long enough for a timer recordingin the SP mode, set the recordingtape speed to "Auto". Recordingwill start in the SP mode. If the length is not long enough,the tape speed will automaticallychange from SP mode to SLP mode. Daily/WeeklyDate Programming Weekly [Sun~Sat]:Use this to recordTV programs on the same channel at the same time every week. Daily [Mon, Tue, Wed, Thu, Fri]: Use this to record TV programson the same channel at the same time every day Monday through Friday. 5 Save Timer Recording Press the RETURNbutton to finish setting the timer recording. Stop the DVD-VCRor turn the power off. Then the DVD-VCR will automaticallyturn on and begin recordingat the time you set. Tostop the timer recording, press the POWER button or press the [] (Stop) button twice. ENG-83 REFERENCE Troubleshooting Before contactinga Samsung authorized servicecenter, performthe following simple checks. If you are unableto solve the problem after readingthe above instructions, note: The modeland serial number on the rear of your DVD-VCR The warranty information A clear descriptionof the problem Then contact your nearest SAMSUNGservicecenter. Identifying DVD Problem Problems Action Page • Check the batteries in the remote control. Nooperations can be performed with the remote control. They may need replacing. • Operatethe remote control at a distance of no morethan 20 feet. • Removebatteries and hold down one or more buttons for several minutesto drain the microprocessorinsidethe remote control to reset it. Reinstallbatteriesand try to operatethe remote control again. P5 Discdoes not play. • Ensurethat the disc is installed with the label side facing up. • Check the region numberof the DVD. P9 5.1 channel sound is not being reproduced. • 5.1 channel sound is reproducedonly whenthe following conditionsare met.: 1) The DVD-VCR is connected with the proper Amplifier 2) The disc is recordedwith 5.1 channel sound. • Checkwhether the disc being playedhas the "5.1 ch" mark on the outside. • Check if youraudio systemis connectedand workingproperly. • In a DVD SetupMenu,is the AudioOutput set to Bitstream? P20 The _) icon appearson screen. • The features or action cannot be completed at this time because: 1. The DVD's software restrictsit. 2. TheDVD'ssoftwaredoesn'tsupportthefeature(e.g.,angles). 3. The feature is not available at the moment. 4. You've requesteda title or chapter numberor searchtime that is out of range. DiscMenudoesn't appear. • Check if the disc has a Menu. Playmodediffers fromthe Setup Menuselection, • Some of the functions selectedin the Setup Menu may not work properlyif the disc is not encoded with the corresponding function. The screen ratio • The Screen Ratio is fixed on your DVDs. cannot be changed. No audio. • Make sure you have selectedthe correct Digital Output in the Audio Options Menu. ENG-84 P41-42 P59~60 I I REFERENCE Problem Action Page The screen is blocked . Press the .q_/)._ button for morethan 5 secondswith no disc in the unit. All settings will revert to the factory settings. Forgot password • From a cold start with no disc in unit, press the .q4/)_,. button simultaneouslyon the front panel for 5 seconds. All settings includingthe password will revert to the factory settings.Don't use this unless absolutely necessary. -ii ................................. you experience ................................... other problems, that contains the explanationsregarding the current problem, and follow the procedureonce again. • If the problem still cannot be solved, please contact your nearest authorizedservice center. The picture is noisy or distorted . Make sure that the disc is not dirty or scratched. . Cleanthe disc. identifying VCR Problem Problerns Action No power . Checkthat the power plug is connectedto a wall outlet. You cannot insert a video cassette • A video cassette can only be inserted with the window side up and the safety tab facing you. The television program was not recorded • Check the DVD-VCR antenna/cable connections. • Is the DVD-VCR tuner properly set? • Check if the safety tab is intact on the cassette. Timer recording was unsuccessful • Re-check the recording start/stop time settings. • If there was a power failure or interruption during timer recording, the recording will have been cancelled. No playbackpicture • Check to see if you are using a prerecorded tape. or the picture is distorted You cannot see normal broadcasts P65 Page P66 P82-83 P78 . Check the tuner or external setting. It should be on tuner. . Check the TV or VCR antenna connections. Noise bars or • Press the TRK buttons to minimize this effect. streaks on playback Whenthe It button is pressedduring playback,the still picturehassevere "noisebars"streaks . A still picture may have "noise bars", depending on the condition of the tape. Press the TRK buttons during slow motion to minimize this effect. Video Head Cleaning • If poor pictures appear on a variety of cassettes, the video heads may need cleaning. This is not a common problem and unless it appears, the heads should not be cleaned. When cleaning the video heads, read all instructions provided with the head cleaning cassette. Incorrect head cleaning can permanently damage the video heads. ENG-85 P69 I REFERENCE Technical Specifications AUDIO 2 Stereoaudio inputs, RCA Connector,-8dbm, 47KO, front and rear inputs VIDEO 2 Compositevideo inputs, RCA Connector,750, 1Vp-p RF Antenna or CATV Input, F-Connector,750 AUDIO 1 Stereoaudio outputs, RCA Connector,-8dbm, 1.5KO AUDIO (DVD only) 1 Digital audio output (1 coaxial) 1 pair Stereo audio outputs VIDEO Outputs VIDEO (DVD only) 1 Compositevideo output, RCA Connector,750, 1Vp-p 1 S-Videooutput, S-Connector,750, Y=1.0Vp-p, C=0.286Vp-p 1 Componentvideo output, 750, Y=1.0Vp-p,Pb=0.7Vp-p, Pr=0.7Vp-p RF Channel3 or 4 VIDEO SYSTEM 1/2-inchVHSsystem,4 rotaryheadhelicalscanning; FMazimuthluminance;chrominance: convertedsubsystem phaseshift VCR AUDIO TRACK Normal:1 track; Hi-Fi: 2 track PLAY/RECORD TIME T-180tape: SP 3 hours, SLP 9 hours FF/REW TIME T-120tape: <2 minutes HEADS Video: DA 4 rotary Audio: 2 rotary heads (Hi-Fi); 1 stationary head (Linear) Control: 1 stationary head Erase: 1 full track, 1 audio track WOW & FLUTTER Less than 0.005% (Hi-Fi) FREQ. RESPONSE 20-20,000 Hz (Hi-Fi) DISC COMPATIBILITY CD, CD-R, CD-RW DVD-Video, CD-Digitat Audio (5" and 3.5") DVD FREQ. RESPONSE 96/48 kHz Sampling: 4 Hz-22kHz SIN RATIO 110 dB DYNAMIC RANGE 96 dB THD 0.003 % POWER REQUIREMENT SYSTEM 120V AC, 60 Hz, 25 watts ENVIRONMENT 41-104°F (5-40°C); 10%-75% humidity WEIGHT 13.8 Ibs. - Samsung Electronics Co., Ltd reservesthe right to changethe specificationswith out notice. - Weight and dimensionsare approximate. ENG-86 [ MEMO ENG-87 1 MEMO J ENG-88 [ MEMO ENG-89 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Region North America Latin America Country CANADA Customer MEXICO U.S.A ARGENTINE BRAZIL CHILE 01-800-SAMSUNG COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO RER DOMINICA TRINIDAD & TOBAGO 0-800-507-7267 VENEZUELA BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA Europe CIS 1-800-SAMSUNG (7267864) www.samsung.com/ca www.samsung.com/mx (7267864) 800-726-7864(SAMSU NG) 800-6225 1-800-299-0013 1-800-234-7267 800-7267 1-800-682-3180 1-800-751-2676 1-800-100-5303 _g.com/latin www.samsung.com/be www.samsung.com/cz www.samsung.com/dk www.samsung.com/fi 02 201 2418 844 000 844 38 322 887 09 693 79 554 08 25 08 65 65 (0,15€/Min) 01805 - 121213 (€ 0,12lMin) 06 40 985 985 199 153 153 0900 20 200 88 (€ 0.10/Min) 231 627 22 0 801 801 881 80 8 200 128 0850 123 989 0870 242 0303 www.samsung.com/uk www.samsung.ru 8-800-200-0400 8-800-502-0000 www.samsung.comlur www.samsung.com/au 1300 362 603 010- 6475 0800-112-8888 www.samsung.com/id www.samsung.com/jp www.samsung.com/my 0120-327-527 1800-88-9999 1800-10-SAMSUNG (7267864) (7267864) 1800-29-3232 TAIWAN 0800-329-999 VIETNAM SOUTH AFRICA U.A.E 1 800 588 889 www.samsung.com.cn www.samsung.com/hk www.samsung.com/in 1600 1100 11 www.samsung.com/ph www.samsung.com/sg www.samsung.com/th 02-689-3232 Middle East & Africa 1880 3030 8282 1800-SAMSUNG www.samsung.com/fr www.samsung.de www.samsung.com/hu www.samsung.com/it www.samsung.lu www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.com/sk www.samsung.com/es www.samsung.com/se 08 585 367 87 800-810-5858, 2862 6001 www.samsung.com www.samsung.com/ar www.samsung.com/br www.samsung.com/cl www.samsung.com/latin www.samsung.com/latin 1-800-7267-864 902 10 11 30 Site www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin 1-800-10-7267 SPAIN SWEDEN U.K RUSSIA UKRAINE AUSTRALIA CHINA HONG KONG THAILAND Web 0800-124-421 02 261 03 710 INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE Center (7267864) 1-800-SAMSUNG 0800-333-3733 LUXEMBURG NETHERLANDS NORWAY POLAN D PORTUGAL SLOVAKIA INDIA Asia Pacific Care www.samsung.com/tw 0860 7267864 (SAMSUNG) 800SAMSUNG (7267864) www.samsung.com/vn www.samsung.com/za www.samsung.com/mea Warranty This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNGagainst manufacturingdefects in materialsand workmanshipfor the following limited warranty period: One (1) Year Parts / Ninety Days (90) Labor This limited warranty beginson the original date of purchase,and is valid only on products purchasedand used in the United States, and does not includetransportation,installation, removal or reinstatIation. Warrantyrepairs must be performed by SAMSUNG'Sauthorized servicecenter. To receive warrantyservice, the original dated bill of sate must be presented upon request as proofof purchase to SAMSUNGor SAMSUNG'S authorized sewice center. Transportationto and from the servicecenter is the responsibilityof the purchaser. SAMSUNGwill repair or replacethis product,at our optionand at no charge with new or reconditionedparts, if found to be defective during the limited warranty period specifiedabove. The product must be returnedduring the warranty period with transportation charges prepaid to SAMSUNG'sdesignated servicecenter. Priorto returning any product for warranty service, the purchaser must contact SAMSUNGfor problemdeterminationand service procedures.SAMSUNGdoes not warrant uninterruptedor error-freeoperation of the product. AII replaced parts and products becomethe property of SAMSUNGand must be returnedto SAMSUNG. Replacementparts and productsassume the remainingoriginal warranty,or ninety (90) days, whichever is longer. This limited warrantycovers manufacturingdefects in materialsand workmanshipencountered in normal, noncommercialuse of this product and shall not apply to the following, including, but not limitedto: damagewhich occurs in shipment; applicationsand uses for which this product was not intended; failures or problemswhich are caused by productsor equipment not suppliedby SAMSUNG;accidents, misuse, abuse, neglect, misapplication, fire, water,lightning or other acts of nature; incorrectelectrical line voltage,fluctuationsor surges;damage caused by improperor faulty installation; improperconnectionwith any peripheral;product alteration or modification; improperor unauthorizedrepair; cosmeticdamage or exterior finish; product with altered serial numbers;failure to follow operating instructions,customer adjustments, maintenanceand environmentalinstructionsthat are covered and prescribed in the instruction book; use of non-SAMSUNGor unauthorizedparts, supplies, accessoriesor equipment which damage this product or result in serviceproblems;failures or problems due to incompatibility with other equipment. ContactSAMSUNG WORLD WIDE Ifyouhaveanyquestions orcomments relating toSamsung products, please contact theSAMSUNG customer carecentre. 1-800-SAMSUNG (7267864) / www.samsung.com Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 1-800-SAMSUNG (7267864) www.samsung.com AK68-00956E Rev.02
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 92 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Mon Mar 23 04:30:04 2009 Author : Title : Subject :EXIF Metadata provided by EXIF.tools