SD Biosensor FA-DG SD BT DONGLE User Manual
SD Biosensor, Inc. SD BT DONGLE
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3314956 |
| Application ID | cGnptw2IL5OtehJcVlcqEw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 32.72kB (408974 bits) |
| Date Submitted | 2017-03-13 00:00:00 |
| Date Available | 2017-09-09 00:00:00 |
| Creation Date | 2017-03-06 17:08:35 |
| Producing Software | Microsoft® Word 2013 |
| Document Lastmod | 2017-03-06 17:08:35 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2013 |
| Document Author: | Windows XP |
User Manual - CONTENTS 1. Introduction 2. Precaution 3. Before Using 3.1 What’s in the box? 3.2 Appearance 3.3 Indicator light status 4. Using the dongle 5. Product Technical Information 1. Introduction SD BT DONGLE is designed for checking results of test to mobile application and using wireless printer 2. Precaution Before use, read the warnings and other information in this manual. •Keep the dongle dry. Humidity and all types of liquids or moisture can cause harmful interface with electronic circuits. •Do not place heavy object on the device. • Avoid placing the system on slopes or vibrating surfaces. • Do not use harsh chemicals, cleaning solvents, water or strong detergents to clean the dongle. To clean external surfaces, use a clean dampened cloth. • Do not use excessive force on the switch or attempt to disassemble the device. • Do not drop or subject the device to impact. • Do not paint the dongle. Paint can clog the moving parts and prevent proper operation. • Keep the dongle away from strong magnets. • Do not disassemble or modify. • Do not dry the dongle with heater or microwave. • Keep all accessories out of the reach of small children. Bluetooth Wireless Technology The Bluetooth technology makes it possible to connect compatible communication devices without using cables. The Bluetooth connection does not require that your SD BT DONGLE and the dongle are in line of sight, but both devices should be 10 meters of each other, although the connection can be subject to interference from obstructions such as walls or other electronic devices. 3. Before Using 3.1 What’s in the box? •Materials provided SD BT Dongle User Manual •Materials not provided Mobile print 3.2 Appearance 3.3. Indicator light status Indicator light status Indicate power light Power on Power light is on Indicate connection light Mounted normally Printer connection failure Successfully connected Connection light flash 2 times Connection light flash 3 times Connection light is on 4. Using the dongle 1) Connect a dongle stereo jack to a terminal of the F100 Analyzer. 2) Turn on the power of the dongle. Then, the PWR light turns on if the connection is normally. 3) or CON light turns on if a mobile printer or mobile device with BLE is properly connected. 5. Product Technical Information Bluetooth Standard RF frequency Wireless range Operating Temperature Condition Humidity Dimension Size Bluetooth 4.0 Class 2 2402 ~ 2480 Mhz 10 meters 0 ~40℃ 10 ~70 % 48.9*26.4*24.8mm This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help CAUTION Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. Hereby, SD BIOSENSOR declares that this equipment is compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. Head Office C-4th&5th, 16, Deogyeong-daero, 1556beon-gil, Yeongtong-gu, Suwon-si, Gyeonggi-do 16690, REPUBLIC OF KOREA Manufacturing Site 74, Osongsaengmyeong 4-ro, Osong-eup, Heungdeok-gu, Cheongju-si, Chungcheongbuk-do 28161, REPUBLIC OF KOREA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 6 Language : ko-KR Tagged PDF : Yes Author : Windows XP Creator : Microsoft® Word 2013 Create Date : 2017:03:06 17:08:35+09:00 Modify Date : 2017:03:06 17:08:35+09:00 Producer : Microsoft® Word 2013EXIF Metadata provided by EXIF.tools