SDC 7500 N R7500 Data Sheet Datasheet
User Manual: SDC 7500 n R7500 Data Sheet Data Sheet
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
HiTower® ZR7500 and R7500 Series The ZR7500 HiTower® easily retrofits SDC’s previous Model 5000 HiTower® door preparation or other major mortise lock brands with only a slight modification to the existing door preparation. The ZR/R7500 incorporates the same design features used on SDC’s Model 7500 HiTower®. SDC’s patented and U.L. Listed HiTower® locks have established a high standard of safety and security for stair tower doors, and for other duallocking and latching door requirements for many years. It is the only lock of this type that can deadlock the mortise lock directly by the actuator with no auxiliary dead locking cam linkage required. This simplified action adds both greater security and increased reliability. A built-in shock absorber keeps the lever action smooth, to prevent any binding pressure or other potential damage to components. The complete SDC ZR7500 HiTower® utilizes a mechanically modified SDC mortise lock in the door and with the SDC electric actuator in the door frame. SDC also performs lock conversions of customer supplied Schlage L9080 mortise locks (source code R7500). SDC modifies the mortise lock and provides the electric actuator. Features Specifications Operating Voltages • 24 VDC • 24 VAC • 115 VAC Power Consumption 450 mA @ 24 VDC 500 mA @ 24 VAC 200 mA @ 115 VAC Building Code Compliance NFPA, IBC, IFC, UBC, SBC and BOCA. • U.L. Listed heavy-duty mortise lock in door, with .75" throw deadlocking mortise latch bolt. • SDC electric actuator in the frame. No electric mortise lock set and no wiring through the door. No power transfer hinge required on single doors. Failsafe. • Small size of actuator allows installation in standard 2" hollow metal frames. • Actuator assembly is sealed. No internal working parts are exposed. • Actuator mechanism does not project beyond frame. No electric bolt to bind or jam due to door misalignment. • Horizontal compensation for door clearance of up to 0.3125" to ensure deadlocking. • Full monitoring is available with the optional SPDT sensors. Latch and door position sensor is (L). The door secure sensor (S) incorporates both the latch/door position sensor in addition to monitoring the HiTower® locking mechanism. Factory assistance in retrofit installations. R7500 Series Operation The locking action is provided entirely by the mortise lock in the door. Remote control is by the ZR/R7500 Series HiTower® electric actuator in the frame. Locking functions needed to meet normal operating requirements are available, including access controls for locking or unlocking, plus mechanical or electric key switch control, or mechanical lever operation. Protected by one or more of the following U.S. Patents: 6,363,363 4,596,411 5,876,073 4,623,178 4,623,181 4,641,867 4,634,155 6,363,763 • Locking operation deadlocks the latch bolt, and internally blocks rotation of outside and/or inside lever. • Key operation directly retracts the latch bolt even though the outside trim remains rigid until door is pulled open. • Designed to interface with standard access systems. SECURITY DOOR CONTROLS GYQS Electrically Controlled Single Point Lock or Latch mea/cny 678-80-SA #3774-0324:101 sdcsecurity.com service@sdcsecurity.com Price & Installation sdcsecurity.com service@sdcsecurity.com Functions SDC HiTower® Advantages 7530 Failsafe. Inside and outside lever locked. Mortise lock is unlocked by remote switch, access controls or by means of a key from either side. Suggested use: Communicating doors, Mantrap doors. 7550 Failsafe. Outside lever locked. Mortise lock is unlocked by remote switch, access control or by means of an outside key, or by rotating the inside lever. Suggested use: Office doors Stairtower doors, laboratories, storerooms. Standard electric mortise locks require: 1) Electric Lockset 2) Power Transfer Hinge 3) Wiring Through Door 4) Separate Transformer Power Supply Electric power transfer hinge Power Supply or 115 VAC Power wiring through door Model electric mortise lock Source code ZR SDC Mortise lock with trim. SDC supplies complete mortise lockset for HiTower® R Schlage L9080. Customer supplies lock set for conversion to HiTower® R7500 HiTower Electric Actuator Handing Hand of Door L - Left Hand R - Right Hand Mortise Lock LR - Left Hand Reverse RR - Right Hand Reverse Voltage FRAME Voltage and Frame Face Size A 115VAC x 2" B 24VAC x 2" C 24VDC x 2" Finish C D F G H DOOR ZR/R7500 Mortise Lock and Strike Alignment 605 Bright Brass 606 Satin Brass 611 Bright Bronze 612 Satin Bronze 613 Oil Rubbed Bronze P Q S U 625 626 629 630 Bright Chrome Satin Chrome Bright Stainless Satin Stainless (Standard) Lever Trim Lever handles are specified with SDC supplied locksets, source ZR. G Galaxy with rose E Eclipse with rose N Nova with rose ZR/R7500 Installation with Back box GE Galaxy with escutcheon EE Eclipse with escutcheon NE Nova with escutcheon Options L S SPDT Latch Position Sensor, 5 Amp max. SPDT Door Secure Sensor, 3 Amp max. (incorporates Latch Position Sensor) SC-10 10 ft cable with connectors (Lock power only) SC-10-5 10 ft cable with connectors (Lock power and options) SECURITY DOOR CONTROLS SECURITY DOOR CONTROLS © 2012 Security Door Controls LIT-ZR/R7500 09/12 M:\Marketing Files\In-House Pubs\Datasheets\Electrified Locksets\R7500 HiTower.indd SDC Electric Actuator Not to scale 7500 EB 1.75" box Mortise Lockset Door Frame www.sdcsecurity.com service@sdcsecurity.com [t] 800.413.8783 805.494.0622 [f] 805.494.8861 801 Avenida Acaso, Camarillo CA 93012 • PO Box 3670, Camarillo CA 93011-3670
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51 Instance ID : uuid:b40893ab-881b-9641-9b77-ec33dfe80191 Document ID : adobe:docid:indd:abe3a95a-781c-11dc-bc2a-fd88ce2d76be Original Document ID : adobe:docid:indd:abe3a95a-781c-11dc-bc2a-fd88ce2d76be Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:29C0F5EE082068118C14E0CA30FA9FE0, xmp.iid:2AC0F5EE082068118C14E0CA30FA9FE0, xmp.iid:178FE8F9082068118C14E0CA30FA9FE0, xmp.iid:34BE38E437B6E11194D581362F591E7C, xmp.iid:7168AE1E38B6E11194D581362F591E7C, xmp.iid:1B8CDEC0082068118C14C1D096ACF96D, xmp.iid:785149EA082068118C14C1D096ACF96D, xmp.iid:8CBACB94142068118083EC007F2D0562, xmp.iid:8DBACB94142068118083EC007F2D0562 History When : 2012:05:16 09:09:40-07:00, 2012:05:16 09:09:40-07:00, 2012:05:16 09:09:58-07:00, 2012:06:14 08:44:56-07:00, 2012:06:14 08:46:34-07:00, 2012:09:13 11:21:07-07:00, 2012:09:13 11:22:17-07:00, 2013:04:12 09:19:08-07:00, 2013:04:12 09:19:36-07:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2013:04:12 09:19:55-07:00 Modify Date : 2013:04:12 09:20-07:00 Metadata Date : 2013:04:12 09:20-07:00 Creator Tool : Adobe InDesign CS5.5 (7.5) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 12370 bytes, use -b option to extract), (Binary data 13054 bytes, use -b option to extract) Doc Change Count : 13 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 2 Creator : Adobe InDesign CS5.5 (7.5)EXIF Metadata provided by EXIF.tools