SDC Spectra S6000 Data Sheet Datasheet
User Manual: SDC Spectra S6000 Data Sheet Data Sheet
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
S6000 Spectra™ Exit Devices Spectra Class - Specification Grade Exit Devices for superior Architectural Style & Performance The new mechanical SDC S6000 Spectra™ series panic and fire rated exit devices are available in rim mount, mortise and surface vertical rod configurations. Spectra Class mechanical exit devices are UL listed and ANSI A156.3 Grade 1 compliant and comply with all national and state building and fire life safety codes. The SDC Spectra series exit devices have a modern look and quiet push pad operation. Delayed Egress Exit Alarm Electric Frame Actuator Electric Latch Retraction • • • • • Panic and fire exit hardware ANSI/BHMA A156.3-2001 Grade 1 Compliant CA Title 19 Compliant Meets/Exceeds ADA requirements UBC 97, Standard 7.2 SECURITY DOOR CONTROLS Patents Pending • Panic & Fire Exit Hardware • ANSI/BHMA A156.3 Grade 1 sdcsecurity.com service@sdcsecurity.com Price & Installation S6000 Spectra™ Exit Device Standard Series Application Device Spcifications 1-3/4”(44 mm) door thickness standard. Specify thickness other than 1-3/4”. • RHR or LHR hollow metal, wood and mineral core doors. Device Head Cover: Zinc alloy or stainless steel Chassis: Steel, plated Housing: Extruded aluminum Push Bar Base: Extruded aluminum Touch Plate: Stainless steel Mounting: Machine screws standard. Sex bolts optional. Order “SNB” for wood or non-reinforced metal doors End Cap: Zinc alloy Hand: Non-handed Dogging: Allen-type key furnished Finish: 630 Stainless Steel Special Finishes POA Outside Trims: Order separately UL Listed: ANSI/BHMA Grade1 Panic Exit Hardware, 3-Hour Fire Exit Hardware. Rim Mount Exit Devices For use on single doors or pair of doors with mullion • Minimum Stile Width : 4 1/2”(114 mm) Latch Bolt: Stainless steel, 3/4"(19mm) throw S6100 Latch: Deadlocking, Stainless steel, 5/8"(16mm) throw Strike: Stainless steel Surface Vetical Rod Exit Devices* For use on single doors or pair of doors • Minimum Stile Width : 3 1/2” (89 mm) Top Latch: Stainless steel 37/64” (14.8mm) Top Strike: Included Bottom Latch: Stainless steel 37/64” (14.8mm) Bottom Strike: Included Latch Case Covers: Steel, stainless steel or brass Vertical Rods: Aluminum tube Standard height: For 7’0” doors *LBR Device - Less Bottom Rod S6200 SVR S6200-LBR SVR Mortise Exit Device For use on single doors or active leaf of double doors Mortise Lock Specifications S6300 Lock Case : Steel plated 6 1/16” x 3 15/16” x 29/32” (154mm x 100mm x 23mm) Anti-friction Latchbolt : 3/4”(19mm) throw Hand: Reversible without removing the lock from the door Auxiliary Deadlocking Bolt : Non-handed, stainless steel Faceplate: Adjustable, 19/32” stainless steel or brass. Strike : ANSI 4 7/8” Mechanical Trim EK Eclipse Trim Options Finish • 1 rim cylinder required for 03, mortise cylinder required for 08 function • 1 mortise cylinder required for CD option CD Keyed dogging. Specify key cylinder separately. Not available with (F) fire exit device. CYL-6KDQ 6 pin, 1.125" mortise cylinder, keyed different, dull chrome CYL-6KAQ 6 pin, 1.125” mortise cylinder, keyed alike, dull chrome RIM-CYL 5 pin, 1.125” mortise cylinder, keyed different, dull chrome Dummy Trim: EK02, GK02, SP02 Key Retracts Latchbolt: EK03, GK03, SP03 Key Locks/Unlocks Lever: EK08, GK08 No Cylinder Lever Always Active: EK14, GK14 SP Saturn GK Galaxy U 630 Dull Stainless Steel standard Electric Trim EKE03 Eclipse, less cylinder Features GKE03 Galaxy less cylinder Trim • Failsecure, field reversible to failsafe • 4 ft. cable and connectors • 12/24VDC @ 600/300 mA EKE03 Eclipse style electric trim, less mortise cylinder GKE03 Galaxy style electric trim, less mortise cylinder Finish Options U 630 Dull Stainless Steel standard LS Locked/unlocked status, SPDT 3 Amp contact STRIKES (SCREWS INCLUDED) RIM DEVICES USE SURFACE / CONCEALED VERTICAL ROD DEVICES USE Rim Strikes Top Strikes Bottom Strikes ST1P ST1F ST2P Standard for S6100P Standard for S6100F Standard top strike for S6200P Projection: 29/32” (23mm) Projection: 13/16” (21mm) Projection: 13/16” (21mm) ST2F Standard top strike for S6200F Projection: 1-1/8” (29mm) (Floor Strikes) Mortise: 2-1/4” (21mm) Optional Threshold Strikes ST28T Optional floor strike for using threshold openings Projection: 3/8” (9.5mm) OPTIONAL DOUBLE DOOR STRIKE ST2DF Optional for pairs of doors with rim mount device. Projection: 1-15/16” (33mm) REMOVABLE MULLION KR90F Standard Key Removable Mullion For Panic Exit and Fire Exit Rim Mount Devices. Length: 8ft Material: 2” 11 Gauge Steel Tube Finish: Primer gray Optional Mullion Strike ST1MP For 6100P Optional for mullion application ST1MF For 6100F Projection: 7/8” (22.5mm) How to Specify S6000 Mechanical Trim Model Spectra Series Exit Device S61 Rim mount S62 Surface vertical rod S63 Mortise EK Eclipse SP Saturn Trim Dummy Trim: EK02, GK02, SP02 Key Retracts Latchbolt: EK03, GK03, SP03 Key Locks/Unlocks Lever: EK08, GK08 No Cylinder Lever Always Active: EK14, GK14 ANSI Functions 01 02 03 08 14 GK Galaxy Exit only, No Trim Dummy pull or lever (opens when dogged) Lever or pull, key latch retraction Lever with key locks/unlocks lever Lever trim always active Panic or Fire Rated P Panic Exit Device F Fire Exit Device P - Mechanical dogging STD; (Add part # CD for optional key cylinder dogging) F - Mechanical dogging not available Finish U 630 Dull Stainless Steel standard Options • 1 rim cylinder required for 03, mortise cylinder required for 08 function • 1 key cylinder required for CD option CD Keyed dogging. Specify key cylinder separately. Not available with (F) fire exit device. CYL-6KDQ 6 pin, 1.125" mortise cylinder, keyed different, dull chrome CYL-6KAQ 6 pin, 1.125” mortise cylinder, keyed alike, dull chrome RIM-CYL 5 pin, 1.125” mortise cylinder, keyed different, dull chrome Electric Trim Handing Features • Failsecure, field reversible to failsafe • 4 ft. cable and connectors RR Right hand reverse bevel, RHRB LR Left hand reverse bevel, LHRB • Audible tone • 12/24VDC @ 600/300 mA EKE03 Eclipse, less cylinder GKE03 Galaxy less cylinder Finish Headcover, touchpad and endcap U 630 Dull Stainless Steel standard Trim EKE03 Eclipse style electric trim, less cylinder GKE03 Galaxy style electric trim, less cylinder Finish U 630 Dull Stainless Steel standard C 605 Bright Brass G 612 Dull Bronze D 606 Dull Brass Length 36 For 36" Door 42 For 42" Door 48 For 48" Door P 625 Bright Chrome Q 626 Dull Chrome Options LS Locked/unlocked status, SPDT 3 Amp contact Options R Request-To-Exit Output, SPDT L Latch Status Output, SPDT Ordering Example Trim Finish Options Spectra™ Series Options How to Specify S6000 Electrical Options A B Exit Alarm, 9V battery powered Exit Alarm, 12-24V AC/DC input, 9V battery backup ADA • 100 dB alarm; visual and audible On/Off status: Armed - green LED blinks every 4 seconds, Alarm mode - red LED, Bypass - no LED • Remote status output • 15 or 60 second arming delay • 2 modes: Continuous alarm with manual key reset; Automatic re-arm 2 minutes after door closes with any manual key reset before 2 minutes. Options • REX and latch status outputs DE Delayed egress exit device Electrification of master exit device and wall mount controller with keypad control and reset KDE Keypad controller with redundant key switch capable of all keypad control features DES For pair of doors, additional exit device equipped with delayed egress mechanism, less controller. Must be ordered together with DE and device. 602RF 1 Amp power supply • User PIN codes may be assigned to 1, 2 or all control functions. Reset, sustained bypass and momentary bypass (REX • Audible alarm voice release time, warning or safety message • Visual display countdown, locked/unlocked, egress executed • Selectable nuisance Operations NA IBC, IFC, NFPA compliant, Field Selectable 15 to 30 second Exit Delay, 1 or 2 Nuisance Delay NC IBC, IFC, NFPA 101, NFPA 1-UFC, UBC, SBC compliant, Fixed 15 second Exit Delay, 0/1 Nuisance Delay, Calif. Building Code OSHPD/Manual Power Up ND IBC, IFC, NFPA 101, NFPA 1-UFC, UBC, SBC compliant, Fixed 15 second Exit Delay, 0/1 Nuisance Delay BC BOCA National Building Code/City of Chicago Compliant, Fixed 15 second Exit Delay, 0 Nuisance Delay, Auto Reset 30 seconds BD BOCA National Building Code, Fixed 15 second Exit Delay, 0/1 Nuisance Delay, Auto Reset 30 seconds Options DEC-J 3 Gang Interior surface mount box for 101-DEC SHD-J Shroud for surface mount box DEC-J outdoor use 101-DE with SHD-J How to Specify S6000 Electrical Options cont. E Electric Latch Retraction Operation: Momentary or maintained latch bolt and push pad retraction, with simultaneous dogging. Automatic re-triggering of latch retraction Voltage: 24VDC @ 700 mA activation, 200 mA continuous 602RF 1 Amp power supply (1 EMC max) 632RF 2 Amp power supply (2 EMC max) EMC 2-station sequencer required for automatic doors only. Monitoring Available Latch status and REX output available G Electric Dogging When energized by optional built-in or remote switch manual, depressing the pushpad, causes the pushpad and latch to remain retracted (unlocked) providing push-pull door operation. When de-energized or signaled by a fire alarm, the pushpad and latch are released. Voltage 170/100 mA @ 12/24VDC Monitoring Available Latch status and REX output available How to Specify S6000 Electrical Options cont. H Hitower Pro Frame Actuator Controlled Fire Exit Device No wiring through door No power transfer hinge or loop GE03 Galaxy Features include failsafe operation and unlocks by access control, power loss or signal from fire command center. Door stays latched even when unlocked. All wiring is maintained in the strike jamb. Complies with national building and fire codes Specify Handing and Voltage: 24VDC, 24VAC, 115VAC G03 Galaxy Status Output Options L Latch position status output, SPDT, 3 Amp S Latch & deadlocked status output, SPDT, 3 Amp E03 Eclipse EE03 Eclipse Trim Options EE03 Eclipse x Escutcheon GE03 Galaxy x Escutcheon NE03 Nova x Escutcheon E03 G03 Galaxy N03 Nova M • • • • Eclipse Electric Mortise Exit Device MF Failsafe Electric Mortise Exit Device MS Failsecure Electric Mortise Exit Device Field reversible failsecure/failsafe. Remains latched when unlocked for fire door integrity Failsafe (F) fire rated device for stairwell doors Power loss or signal from fire command center releases failsafe device immediately Voltage 600/300 mA @ 12/24VDC Options D Door Position N03 Nova NE03 Nova sdcsecurity.com service@sdcsecurity.com Power Transfer Options Power Transfer Hinge Concealed Electric Power Transfer PTM Heavy Duty Series Electric Power Transfer Device SDC’s heavy duty Electric Power Transfer Device provides a concealed and secure means of transferring electric lock and exit device power and signal wires from the frame to the door. Completely concealed when the door is closed the PTM Electric Power Transfer Device is ideal for heavy traffic and applications requiring higher security to inhibit tampering and abuse. F 10B Listed for 3hr Fire Rated Door DPS Contact Optional 2 Conductor: Two (2) 18 Ga. wires, 5 Amp @ 12/24 V AC/DC PTM-2AL Aluminum Powder Coat, US28 equivalent PTM-2BZ Dark Brown Powder Coat, US10B equivalent 10 Conductor: Ten (10) 24 Ga. wires, 1 Amp @ 12/24V AC/DC PTM-10AL Aluminum Powder Coat, US28 equivalent PTM-10BZ Dark Brown Powder Coat, US10B equivalent PT-5 Concealed Mortise Mount Power Transfer Loop Frame mortised steel dust box with flexible steel loop and chrome finish. Recommended for use with hollow metal frames. UL Listed Dimensions: 11.5”H x 1”W x 0.75”D (292 x 25.4 x 19mm) 10B Listed For PT-5 3 Hrs Fire Rated Doors PTH-4 Four conductor hinge, 1 Amp @ 12/24V per pair, 4.5" x 4.5" five knuckle standard weight PTH-10 Ten conductor hinge, 1 Amp @ 12/24V per pair, 4.5" x 4.5" standard weight Consult factory for 3 knuckle, or special sizes Finish All base material steel Q 626 Dull Chrome (standard) H 613 Oil Rubbed Bronze C 605 Bright Brass P 625 Bright Chrome Options DPS Concealed Door Position Switch SPDT, 250mA @ 30VDC Power Transfer Loops 18” (447mm) stainless steel armored flex conduit with small plastic end caps or termination box. Recommended for use with hollow metal and aluminum frames. PT-2U Application Installed in the center hinge position of the door, PTH Power Transfer Hinges provide the concealed wires required between the door and the frame, for the purpose of powering and monitoring electric door hardware. • Electric Lock Power and Control • Door and Lock Status Signaling • Request-to-Exit Signaling Fire Rated Concealed Mortise Power Transfer PT-2U With end caps PT-3V With aluminum wire termination box Features • UL10B Listed for 3 Hr Fire Doors. If the hinge you are presently using does not bear the F mark, it is not listed for use with fire doors. • 500,000 cycles. 5 times UL test criteria • Wire Replacement Warranty • 5ft wire cable PT-3V DOUBLE DOOR APPLICATIONS Rim Device and SVR Device combination - same direction. Overlapping astragal is not required, but coordinator required with a double door strike Two Rim Devices on 2 independent active doors with removable mullion. SECURITY DOOR CONTROLS © 2014 Security Door Controls LIT-S6000 Spectra 04/14 M:\Marketing Files\In-House Pubs\Datasheets\Exit Devices\Spectra 6000 Exit Device.indd Two Surface Vertical Rod (SVR) - same direction. Overlapping astragal is not required. www.sdcsecurity.com service@sdcsecurity.com [t] 800.413.8783 805.494.0622 801 Avenida Acaso, Camarillo CA 93012 • PO Box 3670, Camarillo CA 93011-3670
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.5-c021 79.154911, 2013/10/29-11:47:16 Instance ID : uuid:04855c65-21d8-9f4d-80d8-c50fed171ffb Original Document ID : adobe:docid:indd:1d847293-1b3d-11e1-8d1a-aff70059993f Document ID : xmp.id:9a920b87-507e-4364-ad31-12006225436c Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7eebc130-98da-494a-80ba-55e291ad1faa Derived From Document ID : xmp.did:1ce8f2d0-0bdb-4b21-85f7-2c534c3b7a6c Derived From Original Document ID: adobe:docid:indd:1d847293-1b3d-11e1-8d1a-aff70059993f Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC (Macintosh) History Changed : / History When : 2014:05:16 09:56:52-07:00 Create Date : 2014:05:16 09:56:51-07:00 Modify Date : 2014:05:16 09:57:49-07:00 Metadata Date : 2014:05:16 09:57:49-07:00 Creator Tool : Adobe InDesign CC (Macintosh) Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CC (Macintosh)EXIF Metadata provided by EXIF.tools