SDI Technologies HDL50 Hotel Bluetooth Universal Bedside Spesker System User Manual HDL50 QSG 0321

SDI Technologies Inc. Hotel Bluetooth Universal Bedside Spesker System HDL50 QSG 0321

users manual

HDL50 Sta Quick Start GuideIncluded • HDL50 system• 100V-240V universal AC adaptorSet UpConnect AC adaptorto DC jack/wall outletRemove pull tab from Backup Battery Compartment located on bottom of theunit. When Low Battery Icon appears on display,replace backup battery with 1 fresh CR2450 battery. Keep unit connected to power whenreplacing battery or you will lose settings.Remove thumbscrewand remove back cover toaccess sta controlsSecure the attached Security Tether to a wall or other permanent surface.CAUTION: DO NOT attach to an AC outlet or cause it to become entangledwith anything that can create a hazardous situation.-1 +1 autoDSTtime set time zonetime sync high lowvolume level12VDC 35000mA12V 3.5AoutletThe unit ships with the Daylight Saving Time (DST) switch inAuto position, and will automatically adjust when the time changes in March and November.Setting Clock Using Time SyncDaylight Saving Timea) Connect a Lightning-compatible iPhone to the Dock Press the Time Sync Buttonon the back of the unit to instantlyset the time on the HDL50.bNOTE: For the fastest, most accurate time setting, set the clock using Time Sync with a) a docked iPhone ORb) an iPhone connected to the USB portiPhone time is always current because it pings off cell towers; iPad or iPod are only accurate to the last time they were synced to a computer. Make sure the DST switch is in AUTO position. If you do not have an iPhone or if time sync fails,set the clock manually.b) connect any iPhone to the USB port using the USB cable that came with it-1 +1 autoDSTtime syncasnooze/dimmerfunctiontalkendpower iPod/USB/radioBluetooth/line-inalarmon/offwake-toFMpresetsalarmsetpairing1- place your device into “discoverable” mode 2- press and hold“pairing” button on unit for 2 sec3- if prompted, enter code “0000”4- your device is now paired. You can answer and end calls by pressing “talk” and “end”to use Bluetooth1- press “alarm set” button 2- use </> to set desired wake-up time3- press “alarm set” button again to conrm4- press “wake-to” button to switch between waking to your iPod, USB dock, radio, or buzzerto use alarmOrManual Clock SettingPress the Time Set ButtonPress the Time Set ButtonPress the or button to set timePress the or button to set yearPress the or button to set datePress the or button to tune toa desired station (hold to search fornext clear station)time setPress and hold the Time Set Button2 SECStime settime setPress and hold the Time Set Button2 SECS2 SECStime setPress the Time Set Buttonto conrm Clock Settingtime setBeepBeeptime setPress the Time Set Buttonto conrm BeepBeepSetting 12/24 Hour Time DisplayFM RadioFM PresetsTo toggle time display between 12 or 24 hours, press alarm set buttonalarmsetPress function Button as needed to cycle to FM modefunctioniPod/USB/radioBluetooth/line-inPress FM presets Button to cycle to the preset (P1- P6) you wish to setPress FM presets Button to conrmFollow steps above to set all 6 FM presetsOnce sta has completed setup, replace security cover on back of unit and tighten thumbscrew.BeepBeepPress the or button to select station to presetFMpresetsPress and hold FM presets Button to conrm preset numberFMpresetsHDL50 Quick Start Guide - FrontSize: 432 x 140 mmPrinting Color: BlackMat’l: 100 gsm WF paperMar. 21, 13.HDL50 Quick Start Guide - InsideSize: 432 x 140 mmPrinting Color: BlackMat’l: 100 gsm WF paperMar. 21, 13.HDL50QSG-031913-A © 2013 HTI Industries, LLC. All rights reserved Printed in China

Navigation menu