SDI Technologies HDL50A Hotel Bluetooth Universal Speaker System for iPad, iPhone and iPod User Manual
SDI Technologies Inc. Hotel Bluetooth Universal Speaker System for iPad, iPhone and iPod
User Manual
HDL50A Quick Start Guide - Front Size: 432 x 140 mm Printing Color: Black Mat’l: 100 gsm WF paper May 30, 13. (For Finemost) Set Up HDL50A Staff Quick Start Guide Secure the attached Security Tether to a wall or other permanent surface. CAUTION: DO NOT attach to an AC outlet or cause it to become entangled with anything that can create a hazardous situation. Remove thumbscrew and remove back cover to access staff controls Included a) Connect a Lightning-compatible iPhone to the Dock Connect AC adaptor to DC jack/wall outlet HDL50A system • 100V-240V universal AC adaptor NOTE: For the fastest, most accurate time setting, set the clock using Time Sync with a) a docked iPhone OR b) an iPhone connected to the USB port iPhone time is always current because it pings off cell towers; iPad or iPod are only accurate to the last time they were synced to a computer. 12V 3.5A DC 12V 3.5A DST time set time sync time zone -1 +1 auto Or Remove pull tab from Backup Battery Compartment located on bottom of the unit. When Low Battery Icon appears on display, replace backup battery with 1 fresh CR2450 battery. Keep unit connected to AC power when replacing battery or you will lose settings. b) connect any iPhone to the USB port using the USB cable that came with the iPhone DST Make sure the DST switch is in AUTO position. If you do not have an iPhone or if time sync fails, set the clock manually. -1 +1 auto Daylight Saving Time WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal. The unit ships with the Daylight Saving Time (DST) switch in Auto position, and will automatically adjust when the time changes in March and November. talk HDL50A Quick Start Guide - Inside Size: 432 x 140 mm Printing Color: Black Mat’l: 100 gsm WF paper May 30, 13. (For Finemost) FM presets to use Bluetooth 1- place your device into “discoverable” mode 2- press and hold“pairing” button on unit for 2 sec 3- if prompted, enter code “0000” 4- your device is now paired. You can answer and end calls by pressing “talk” and “end” Manual Clock Setting NOTE: Time display can be set to 12 or 24 hours at any time during clock setting To toggle time display between 12 or 24 hours, press the alarm set button during clock setting time sync Setting Clock Using Time Sync outlet • Press the Time Sync Button on the back of the unit to instantly set the time on the HDL50A. power or button to set year Press function Button as needed to cycle to FM mode alarm set time set function wake-to end snooze/dimmer alarm on/off to use alarm 1- press “alarm set” button 2- use > to set desired wake-up time 3- press “alarm set” button again to confirm 4- press “wake-to” button to switch between waking to your iPod, USB dock, radio, or buzzer Press the or button to select station to preset function iPod/USB/radio Bluetooth/line-in Press the or button to tune to a desired station (hold to search for next clear station) Press the Time Set Button alarm set iPod/USB/radio Bluetooth/line-in FM Radio Press the pairing Press FM presets Button to confirm FM presets Beep Clock Setting Press and hold the Time Set Button time set to enter clock setting mode Press the or Beep 2 SECS Press the or FM Presets button to set date Press FM presets Button to cycle to the preset (P1- P6) you wish to set button to set time Press the Time Set Button to confirm Clock Setting Press the Time Set Button time set Follow steps above to set all 6 FM presets Extend FM antenna for best reception FM presets Once staff has completed setup, replace security cover on back of unit and tighten thumbscrew. time set Beep Beep Press and hold FM presets Button to confirm preset number Maintenance 2 SECS FM presets • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit. HDL50AQSG-053013-A © 2013 HTI Industries, LLC. All rights reserved Printed in China
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2013:06:20 14:50:51+08:00 Creator : Adobe Acrobat 9.0 Modify Date : 2013:07:04 16:31:30+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2013:07:04 16:31:30+08:00 Creator Tool : Adobe Acrobat 9.0 Format : application/pdf Document ID : uuid:82e198f5-eb6a-48d2-a874-96054e9afbae Instance ID : uuid:3165842a-9584-427c-9624-1195073868a1 Producer : Adobe Acrobat 9.0 Image Conversion Plug-in Page Count : 2EXIF Metadata provided by EXIF.tools