SDI Technologies IBT4 Portable Stereo Bluetooth Speaker with FM Radio User Manual iBT4 IB 1214
SDI Technologies Inc. Portable Stereo Bluetooth Speaker with FM Radio iBT4 IB 1214
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1876742 |
| Application ID | QKKqVrNnHKj+alYJfZNy4A== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 35.03kB (437888 bits) |
| Date Submitted | 2013-01-10 00:00:00 |
| Date Available | 2013-01-10 00:00:00 |
| Creation Date | 2012-12-14 15:48:36 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2012-12-14 15:48:36 |
| Document Title | iBT4 IB 1214 |
| Document Creator | Adobe Illustrator CS5 |
iBT4 IB Size: 153mm x 120mm Printing color: Black Dec 14, 2012. P1 iBT4 Bluetooth Wireless Boombox with FM Radio and Rechargeable Battery instruction manual P2 Introduction iBT4 Thank you for purchasing the iHome iBT4. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit. P3 FCC Information FCC Radiation Exposure Statement iBT4 FCC ID: EMOIBT4 IC: 986B-IBT4 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-102 of the IC Rules; Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada QDID:B020169 P4 Table of Contents iBT4 Meet Your iBT4 ............................................................................................................. 1-2 Setting Up the Unit/Charging the Unit ..................................................................................3 Using Bluetooth:Pairing Your Device .....................................................................................4 Playing Audio Via Bluetooth................................................................................................5 Playing Audio Via Aux-in/ Playing Audio Via Aux-out ..............................................................6 FM Radio/ Using FM Radio in Other Countries......................................................................7 Resetting the Unit ..............................................................................................................8 Internal Rechargeable Lithium-ion Battery...............................................................................9 Consumer Product Safety Guide ................................................................................... 10-11 Troubleshooting ..............................................................................................................12 Warranty......................................................................................................................13 P5 iBT4 Meet Your iBT4 Top Power/Mode Dial Reverse/Forward/Setting Buttons Display Volume Dial Play/Pause and Pairing Button Back Bottom Line-out Jack DC Jack Line-in Jack P6 iBT4 Included • iBT4 system • 100V-240V universal AC adaptor power adaptor The handle of the unit can be placed in two positions, upright for carrying, or back for general use or tilt-back play. P7 Using the Setting Up the Unit The unit can be operated using the included AC adaptor or on the internal rechargeable lithium ion battery for portable use. Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet. RESET RESET TEST T EST Charging the Unit The internal lithium ion battery charges when connected to power via the AC adaptor. For first time use, charge the battery completely (for about 6 hours). The battery indicator on the display shows the battery/charging status. Battery Indicator (charge status) Fully charged Needs charging iBT4 P8 Using the Using Bluetooth: Pairing Your Device iBT4 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Turn the Power/Mode Dial right to turn the unit ON (pairing is available in any mode). 3. Press and hold the Pairing/Play Pause Button on the unit for 2 seconds to begin pairing the unit with your device. “PAIR” will flash on the display, indicating pairing attempt. “iHome iBT4” should appear on your device’s menu. If “Not Connected” or similar message appears, select “iHome iBT4” on the device to connect it. If your device asks for a password, enter 1234 or 0000 on the keyboard of your device. If no device is paired within 2 minutes, a tone will sound and the unit will revert to its previous mode. To retry pairing, turn the Power/Mode Dial to the OFF position (left) then follow steps 2 & 3 again. 4. Once paired with a device, the PAIR indicator on the display will stop flashing then disappear and the Bluetooth icon will remain. On some devices, you must then select “Use as Audio Device” or similar on the device’s Bluetooth menu. Once paired, your device should link to the iBT4 whenever within range (about 30 feet). NOTE: The unit can auto-link with up to 3 previously paired devices. P9 Using the Pairing with a Different Device iBT4 When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (about 30 feet). To pair with a different device you must turn off the Bluetooth capability of the already paired device. Playing Audio Via Bluetooth 1. Turn the Power/Mode Dial to the Bluetooth position (right) to enter Bluetooth mode. The Bluetooth Indicator on the display will flash and a tone will sound as the unit searches for a previously paired device, and then turn solid once a previously paired device is detected. 2. Press the Pairing/Play Pause Button on the unit to play audio from your linked Bluetooth device. While audio is playing, press to pause play, and again to resume play. 3. Press the or Buttons on the unit to go to the previous or next track. Press and hold briefly to scan backward or forward within tracks. 4. Turn the Volume Dial to control the system volume. 5. When done listening, turn the Power/Mode Dial to the OFF position (left) to turn the unit off. Remember to tun off your audio device, too. P10 Using the Playing Audio via Line-In iBT4 1. Connect one end of a standard stereo 3.5mm audio cable (not included) into the line-in jack on the back of the unit and the other end into the headphone or output jack of your audio device. 2. Turn the Power/Mode Dial on the unit RIGHT (to any mode) to turn it on. 3. Power on the audio device and use the controls on the device to play or pause audio and navigate tracks. 4. Turn the Volume Dial to control the system volume. 5. When done listening, turn the Power/Mode Dial to the OFF position (left) to turn the unit off. Remember to turn off your audio device, too. Playing Audio via Line-out You can connect the unit to an external speaker via the Line--out jack located on the back of the unit to expand the audio playing from the iBT4 1. Connect a 3.5 mm audio cable plug to the Line-out jack on back of the unit and connect the other end to the line-in jack on your external speaker. Note that the line output signal is mono. 2. Turn the Power/Mode Dial RIGHT (to any mode) to turn the unit on. The audio from the iBT4 will play from both the unit’s speaker AND from the Line-out jack. 3. Turn the Volume Dial to control the system volume. The Volume Dial does NOT affect the output volume of the line out jack. 4. When done listening, turn the Power/Mode Dial to the OFF position (left) to turn the unit off. Remember to turn off any connected audio device, too. NOTE: The Line-out jack is NOT a headphone jack. P11 Using the FM Radio iBT4 1. Turn the Power/Mode Dial on the unit to Radio mode (center). 2. Press the or Buttons on the unit to tune in the desired station (press and hold to scan to the next clear station). 3. The unit has an external telescoping FM radio antenna; extend it gently and adjust it for best FM reception. 4. Turn the Volume Dial to control the system volume. 5. When done listening, turn the Power/Mode Dial to the OFF position (left) to turn the unit off. Using FM Radio in Other Countries Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to USA frequency steps. To use the radio outside the USA: 1. Turn the Power/Mode Dial on the unit to Radio mode (center). 2. Press and hold BOTH the and Buttons TOGETHER until “USA” appears in the display. 3. Press and release the or Buttons to cycle to your location: Europe, Japan, Australia, China or USA. 4. Press and release BOTH and Buttons TOGETHER to exit frequency setting mode. P12 Using the Resetting the Unit iBT4 If the unit “locks up” or becomes unresponsive, you can reset it to factory settings. To do so, press and hold the Button and the Button TOGETHER for 8 SECONDS. A long beep will sound, indicating the unit has been reset. Note that you will need to re-pair Bluetooth devices. Note: There is also a Reset port in the back of the unit. Insert the end of a paper clip or similar and hold briefly. A tone will indicate the unit has reset. Bluetooth links will remain intact. Reset port Reset the iBT4 by using a paper clip to press the reset button P13 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace your battery, you should follow the disposal instructions below: • Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. • Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, please dispose of the device in a waste bin for electronic devices. • Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see which ones in your area do so. CAUTION The battery used in this device may present a risk of fire, explosion or chemical burn if mistreated • Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. • Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance. • Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery. Leakage or deterioration of the battery may occur if this warning is not heeded. • Never expose the battery to any liquid. • Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. • Always keep the battery out of the reach of infants and small children. P14 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc. 7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 10 P15 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 11. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihomeaudio.com or call 1-800-288-2792 Toll Free 11 P16 Troubleshooting Unit doesn’t respond (no power) • • • • Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT4. Make sure the Power/Mode Dial is not in the OFF (left) position. Unit doesn’t respond (locked up or frozen) The unit may need to be reset. To do so, press and hold the Button and the Button TOGETHER for 8 SECONDS. A long beep will sound, indicating the unit has been reset. Trouble pairing device/computer with iBT4 Bluetooth implementation varies depending on your device’s hardware and operating system. Please see our website for updates on pairing. • When you power ON the speaker, it will automatically link with the last previously paired Bluetooth device if the device is still within range (approx. 30 feet). To pair with a different device you must turn off Bluetooth capability on the already paired device, or take it out of range. • Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing and linking. For further information and to see the latest instructions, visit www.ihomeaudio.com/support 12 P17 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer Service. The product must include proof of purchase, including date of purchase. An out-of-warranty fee for service will be charged for units that are received without proof of purchase. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required: 1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the address of the Factory Service Center. 2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box. SDI is not responsible for damage that occurs during shipping to the Factory Service Center. 3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period. Also include your name and address information, a brief description for why the unit is being returned, and the return authorization number. No unit can be processed without a return authorization number. 4. Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the Factory Service Center address authorized by SDI Customer Service. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. iBT4-121412-A © 2013 SDI Technologies, Inc. All rights reserved Questions? Visit www.ihomeaudio.com or call 1-800-288-2792 Toll Free Printed in China
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Format : application/pdf Title : iBT4 IB 1214 Metadata Date : 2012:12:14 15:48:36+08:00 Modify Date : 2012:12:14 15:48:36+08:00 Create Date : 2012:12:14 15:48:36+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 20 Thumbnail Format : JPEG Thumbnail Image : (Binary data 3115 bytes, use -b option to extract) Instance ID : uuid:56fc4f8b-04c9-e641-9e15-70b50469adc2 Document ID : xmp.did:F97F117407206811808393238B6600C1 Original Document ID : uuid:5B20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:daf72956-72d6-cb49-9aaa-c984a06aaad1 Derived From Document ID : xmp.did:01801174072068118083C8F70B6D4298 Derived From Original Document ID: uuid:5B20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:FD7F1174072068118083A0F3A15A5CAC, xmp.iid:0A801174072068118C14B5A5244C6B3A, xmp.iid:01801174072068118083E2D4BB4E963D, xmp.iid:04801174072068118083E2D4BB4E963D, xmp.iid:F97F117407206811822A90D639DC53EA, xmp.iid:F77F117407206811822AD82A0827A701, xmp.iid:07801174072068118083966B6EAE1585, xmp.iid:02801174072068118A6D93CC8B8C703F, xmp.iid:02801174072068118083A856EA44A095, xmp.iid:02801174072068118083E1D6AD674AA6, xmp.iid:01801174072068118083C8F70B6D4298, xmp.iid:F97F117407206811808393238B6600C1 History When : 2010:10:12 11:33:38+08:00, 2012:10:16 16:24:06+08:00, 2012:10:16 09:56:34-04:00, 2012:10:16 16:16:10-04:00, 2012:10:17 15:11:07-04:00, 2012:10:18 09:33:29-04:00, 2012:10:24 17:30:57-04:00, 2012:11:27 11:46:52-05:00, 2012:11:28 13:52:45-05:00, 2012:12:10 14:34:54+08:00, 2012:12:12 10:03:40-05:00, 2012:12:14 15:48:29+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, /, /, /, /, /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : /Users/joyceyoung/Desktop/2013/iBT4/iBT4 packing/IBT4 IB/iBT4G angle+varnish.jpg Startup Profile : Basic CMYK Has Visible Overprint : True Has Visible Transparency : False N Pages : 1 Max Page Size W : 211.666667 Max Page Size H : 289.277778 Max Page Size Unit : Millimeters Font Name : ArialMT, Futura-Light, Futura-Book, Futura, Futura-Bold, HelveticaNeue-HeavyItalic, HelveticaNeue, MyriadPro-Regular, LiHeiPro Font Family : Arial, Futura, Futura, Futura, Futura, Helvetica Neue, Helvetica Neue, Myriad Pro, 儷黑 Pro Font Face : Regular, Light, Book, Medium, Bold, 86 Heavy Italic, Regular, Regular, 中黑 Font Type : Open Type, Type 1, Type 1, Type 1, Type 1, Type 1, TrueType, Open Type, TrueType Font Version : Version 3.05, 001.000, 001.000, 001.000, 001.001, 001.100, 6.1d8e1, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, 6.0d4e1 Font Composite : False, False, False, False, False, False, False, False, False Font File Name : Arial, FuturLig; Futura, FuturBoo; Futura, Futur; Futura, FuturBol; Futura, HelveNeuHeaIta; Helvetica Neue SFAD, HelveticaNeue.dfont, MyriadPro-Regular.otf, 儷黑 Pro.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: C=0 M=50 Y=100 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 50.000000 Swatch Groups Colorants Yellow : 100.000000 Swatch Groups Colorants Black : 0.000000 Producer : Adobe PDF library 9.90 Page Count : 17 Creator : Adobe Illustrator CS5EXIF Metadata provided by EXIF.tools