SDI Technologies IBT73 GlowTunes Bluetooth Rechargeable Mini Speaker User Manual iBT73 IB EN 526

Download:
Mirror Download [FCC.gov]
Document ID	2316162
Application ID	gWBt7f0YRUJKjIoZMwt9Wg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.32kB (416496 bits)
Date Submitted	2014-07-04 00:00:00
Date Available	2014-07-04 00:00:00
Creation Date	2014-05-27 09:35:07
Producing Software	Adobe PDF library 10.01
Document Lastmod	2014-05-27 09:35:07
Document Title	iBT73 IB(EN) 526
Document Creator	Adobe Illustrator CC (Macintosh)

Model: iBT73 (Front)
IB (English)
Size: 324Wmm x 200Hmm
Color: Print in Black color
Date: May 26, 2014
iHome
Maintenance
For Models That Use Lithium Batteries
• Lithium batteries can explode or cause burns if disassembled, shorted,
recharged, exposed to water, fire, or high temperatures & not handled
appropriately
• Do not place loose batteries in a pocket, purse, or other container
containing metal
objects, do not mix with used or other battery types, or store with hazardous or combustible materials.
• Store in cool, dry, ventilated area.
• Follow applicable laws and regulations for transport and disposal.
•
•
•
Model iBT73
GlowTunes Bluetooth
Rechargeable
Mini Speaker
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish.
A cloth or other protective material should be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
cleaning agents such as thinner or similar materials can damage the surface of the unit.
Limited 1 Year Warranty Information
CHARGE
BEFORE
USE
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this
product to be free from defects in workmanship and materials, under normal use and conditions,
for a period of one (1) year from the date of original purchase.
A Consumer Guide to Product Safety
Should this product fail to function in a satisfactory manner, it is best to first return it to the store
where it was originally purchased. Should this fail to resolve the matter and service still be required
by reason of any defect or malfunction during the warranty period, SDI will repair or, at its
discretion, replace this product without charge. This decision is subject to verification of the
defect or malfunction upon delivery of this product to the Factory Service Center authorized by
SDI Customer Service. The product must include proof of purchase, including date of purchase.
An out-of-warranty fee for service will be charged for units that are received without proof of
purchase.
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured
to ensure your personal safety. However, improper use can result in potential
electrical shock or fire hazards. Please read all safety and operating instructions
carefully before installation and use, and keep these instructions handy for future
reference. Take special note of all warnings listed in these instructions and on the
unit.
Questions? Visit www.ihome.com
Before returning this product for service, please first replace the batteries (if applicable) with
fresh ones, as exhausted or defective batteries are the most common cause of problems
encountered.
1. Water and Moisture – The unit should not be used near water. For example:
near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a
wet basement.
2. Ventilation – The unit should be situated so that its location or position does
not interfere with its proper ventilation. For example, it should not be situated
on a bed, sofa, rug or similar surface that may block ventilation openings.
Also, it should not be placed in a built-in installation, such as a bookcase or
cabinet, which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators,
heat registers, stoves or other appliances (including amplifiers) that produce
heat.
4. Power Sources – The unit should be connected to a power supply only of
the type described in the operating instructions or as marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that
they are not likely to be walked on or pinched by items placed upon or against
them. It is always best to have a clear area from where the cable exits the unit
to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the
Maintenance section of this manual for cleaning instructions.
7. Objects and Liquid Entry – Care should be taken so that objects do not
fall and liquids are not spilled into any openings or vents located on the
product.
8. Attachments – Do not use attachments not recommended by the product
manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall
socket and disconnect the antenna or cable system during a lightning storm
or when it is left unattended and unused for long periods of time. This will
prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified
service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate
normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period
of time, such as a month or longer, the power cable should be unplugged from
the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those
methods described in the user’s operating instructions. Service methods not
covered in the operating instructions should be referred to qualified service
personnel.
If service is still required:
1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the
address of the Factory Service Center.
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated
box SDI is not responsible for damage that occurs during shipping to the Factory Service
Center.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the
date of purchase, if within the warranty period. Also include your name and address
information, a brief description for why the unit is being returned, and the return
authorization number. No unit can be processed without a return authorization number.
4. Write the return authorization number on the side of the shipping package and send the
unit prepaid and insured to the Factory Service Center address authorized by SDI
Customer Service.
FCC ID: EMOIBT73
IC: 986B-IBT73
FCC Information
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
This device complies with Part 15 of the FCC Rules, operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover (i) products which have been damaged by negligence or willful actions, misuse
or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or
broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s
or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service
Center and its return to the owner.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
© 2014 SDI Technologies, Inc. All rights reserved
CAN ICES-3 (B)/NMB-3(B)
QDID: B020770
This warranty is valid only in the United States of America and does not extend to owners of the
product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors,
resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party for any consequential or
incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do
not allow limitations on implied warranties or exclusion of consequential damages, so these
restrictions may not apply to you.) This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
iBT73-140526-A
•
•
IMPORTANT
Printed in China
Read before proceeding
If you have any question regarding the operation or use of this product, please visit
www.ihome.com to view answers to frequently asked questions.
To learn more about this and other iHome products, please visit us online at www.ihome.com
Model: iBT73 (Back)
IB (English)
Size: 324Wmm x 184Hmm
Color: Print in Black color
Date: May 26, 2014
Locking and Unlocking the iBT73
To compress and lock speaker, gently press speaker down from the
top and twist clockwise to lock in place.
To unlock and expand the speaker, grip the top and bottom and give a
small twist counter-clockwise. DO NOT pull hard once open, as the
built in spring will automatically extend the speaker to its proper
position.
to pair, then play
to play
Audio/
Charging Jack
Charging/Pairing
LED
Bluetooth Mode
Speaker front view
Speaker back view
When speaker is ON ( ),
press the LED Lighting Effects
Button
to cycle through 4
lighting effects modes: Fast
Color Cycle, Slow Color Cycle,
One Color, and lighting effect Off.
Off/On/
Bluetooth
Switch
LED Lighting
Effects Button
Speaker right view
Charging the iBT73
CHARGE BEFORE USE
Micro USB plug
Standard
USB plug
Computer
connected to
working outlet
Computer USB port
3.5mm
audio plug
USB AC adaptor
(not included)
Mobile Phone PC/Tablet Game Devices iPod
Aux-in Mode
Laptop MP3/MP4
Combination cable
The iBT73 is powered by a rechargeable battery in the speaker. Make
sure to charge speaker before use.
• Connect the micro-USB plug to the
Audio/Charging jack on
the speaker.
• Connect the larger USB plug to a powered USB port, such as that on
a computer. Your computer should be connected to a wall outlet
when speaker is charging. The light on the speaker will turn to solid
red while charging and turn off when fully charged.
• If the blue LED dims, or you notice sound distortion at higher
volumes, or there is no sound at all it's time to recharge the batteries.
Note: the LED Lighting Effects may still work even in low battery
conditions.
Using Bluetooth with the iBT73
Speaker left view
to play
Charging the iBT73
USB AC adaptor
connected to working outlet
• Slide the of Off/On/Bluetooth Switch on the speaker to the
Bluetooth position ( ). The light will flash blue and red and a tone will
sound as the speaker attempts to pair with a Bluetooth device.
• Place your audio device in Bluetooth mode (often found in the
device’s Settings or Tools menu) and make it “discoverable”. “iHome
iBT73” should appear on your device. If “Not Connected” or similar
message appears, select it to connect. If your device asks for a
passcode, enter ‘1234’.
• Once paired, the light will glow solid blue. You can then stream audio
to the speaker. If pairing is not successful, turn the power OFF ( )
on the speaker and repeat pairing procedure.
• To listen to Bluetooth audio, make sure the Off/On/Bluetooth
Switch on the speaker is in Bluetooth ( ) or ON ( ) position.
• Control Bluetooth audio from your device.
Remember to turn off the speaker and your device after listening.
NOTE: When unit is charging, the blue light will appear solid
red.
Using the iBT73 with Aux Devices
• Connect the micro-USB plug to the
Audio/Charging jack on
the speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack or
line-out of any audio device.
• Slide the Off/On/Bluetooth Switch on the speaker to the ON ( )
position. The blue power light will flash, indicating auto-link mode.
• Press play on your audio device and adjust its volume to listen to
audio.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.5-c014 79.151739, 2013/04/03-12:12:15
Format                          : application/pdf
Title                           : iBT73 IB(EN) 526
Creator Tool                    : Adobe Illustrator CC (Macintosh)
Create Date                     : 2014:05:27 09:35:07+08:00
Modify Date                     : 2014:05:27 09:35:07+08:00
Metadata Date                   : 2014:05:27 09:35:07+08:00
Thumbnail Width                 : 192
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 21021 bytes, use -b option to extract)
Document ID                     : xmp.did:87fe8f73-dd8d-433a-a396-3b10bde3a6b9
Instance ID                     : uuid:28b8f98c-433f-0840-8725-35eaacd119a6
Original Document ID            : uuid:62C45CDF36E7DE11B3EDE6C75058782A
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:3d4840d1-376c-6844-a51a-7514c41899a2
Derived From Document ID        : xmp.did:f1e422af-8fae-49bf-84ad-018d2b2bc7c7
Derived From Original Document ID: uuid:62C45CDF36E7DE11B3EDE6C75058782A
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:F87F1174072068118C14BA54CF54AC0F, xmp.iid:87fe8f73-dd8d-433a-a396-3b10bde3a6b9
History When                    : 2012:06:27 13:36:45-04:00, 2014:05:27 09:35+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CC (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : /Users/joyceyoung/Desktop/2014 Models/iBT73/iBT73 IB/iBT73-Silver IB.jpg
Startup Profile                 : Print
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 397.933333
Max Page Size H                 : 520.752075
Max Page Size Unit              : Millimeters
Font Name                       : ArialNarrow, ArialMT, Arial-ItalicMT, Arial-BoldMT, Arial-Black, Helvetica-Light, Helvetica, Helvetica-Bold, HelveticaNeue-BoldCond, HelveticaNeue-Light, HelveticaNeue-LightItalic, HelveticaNeue-Heavy, HelveticaNeue-HeavyItalic, MyriadPro-Regular, MyriadPro-Black
Font Family                     : Arial Narrow, Arial, Arial, Arial, Arial Black, Helvetica, Helvetica, Helvetica, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Myriad Pro, Myriad Pro
Font Face                       : Regular, Regular, Italic, Bold, Regular, Light, Regular, Bold, 77 Bold Condensed, 45 Light, 46 Light Italic, 85 Heavy, 86 Heavy Italic, Regular, Black
Font Type                       : Type 1, Open Type, Open Type, Open Type, Open Type, TrueType, TrueType, TrueType, Type 1, Type 1, Type 1, Type 1, Type 1, Open Type, Open Type
Font Version                    : 001.003, Version 3.05, Version 3.05, Version 3.05, Version 5.00.1x, 8.0d3e1, 8.0d3e1, 8.0d3e1, 001.000, 001.000, 001.000, 001.000, 001.100, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : ArialNar; Arial & Groenig, Arial, Arial, Arial, Arial Black.ttf, Helvetica.dfont, Helvetica.dfont, Helvetica.dfont, HelveNeuBolCon; HelveticaNeue BoldCond, HelveNeuLig; Helvetica NeueLt:Med:Heavy, HelveNeuLigIta; Helvetica NeueLt:Med:Heavy, HelveNeuHea; Helvetica NeueLt:Med:Heavy, HelveNeuHeaIta; Helvetica NeueLt:Med:Heavy, MyriadPro-Regular.otf, MyriadPro-Black.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, 40% Grey.spot, 60% Grey.spot, 30% Grey.spot, 10% Grey.spot, 20% Grey.spot
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Gray    : 12
Swatch Groups Colorants Swatch Name: Spot Varnish
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 50.000000
Swatch Groups Colorants Magenta : 0.000000
Swatch Groups Colorants Yellow  : 50.000000
Swatch Groups Colorants Black   : 0.000000
Producer                        : Adobe PDF library 10.01
Page Count                      : 1
Creator                         : Adobe Illustrator CC (Macintosh)

EXIF Metadata provided by EXIF.tools