SDI Technologies IBT74 Color Changing Rechargeable Bluetooth Speaker with Speakerphone User Manual iBT74 EN IB 0213
SDI Technologies Inc. Color Changing Rechargeable Bluetooth Speaker with Speakerphone iBT74 EN IB 0213
User Manual
iBT74 EN-IB Size: 214mm x 336mm Printing color: Black Feb 03, 2015-r 100gsm2 WF (書紙) iBT74 EN-IB Size: 214mm x 336mm Printing color: Black Feb 13, 2015-r 100gsm2 WF (書紙) iBT74 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping instructions. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. iBT74-150213-B (EN) © 2015 SDI Technologies, Inc. All rights reserved Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free Printed in China Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture – DO NOT immerse unit in water. Make sure the seal and surrounding surfaces are completely dry before opening seal to prevent moisture from damaging the internal electronics. Keep seal free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason the seal is not making a tight seal, water may enter the unit. 2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. 3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 5. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc. 6. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 7. Attachments – Do not use attachments not recommended by the product manufacturer. 8. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 9. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 10.Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C.the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12.Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, fully charge the unit before storing. 13.Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free What’s Included Model: iBT74 off • carry strap WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace your battery, you should follow the disposal instructions below: • Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. • Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, please dispose of the device in a waste bin for electronic devices. • Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see which ones in your area do so. CAUTION The battery used in this device may present a risk of fire, explosion or chemical burn if mistreated • Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. • Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance. • Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery. Leakage or deterioration of the battery may occur if this warning is not heeded. • Never expose the battery to any liquid. • Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. • Always keep the battery out of the reach of infants and small children. on 2. Slide the Power On/Off Switch to ON to turn on the iBT74. The first time the unit is powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth device (if so, skip to step 4). Otherwise, follow step 3 to begin pairing. 3. Press and hold the Bluetooth/Speakerphone Button for 2 seconds. The iBT74 will beep and the Bluetooth status indicator light on top of the unit will flash quickly. If Color Mode is on, the cabinet lights will flash blue and red. 4. “iHome iBT74” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBT74” to connect it. If prompted for a passcode, enter “1234” on your device’s keypad. CHARGE BEFORE USE For iPhone iBT74 carry strap Combination micro USB to USB cable/audio cable instruction manual iBT74 FCC Information FCC Radiation Exposure Statement Top Charging/Bluetooth Status Indicator Light Bottom Back iHome iBT74 5. If pairing is successful, 1 beep will sound and the Bluetooth status indicator light will appear solid blue (in Color Mode, cabinet will flash blue twice), indicating the iBT74 is ready to play music. There should also be an indication on your device. If no device is successfully paired within 3 minutes the iBT74 will default to previous mode. Once the iBT74 is paired to a device, it will attempt to autolink when the device is within range (about 30 feet). Pairing with a Different Device When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (approx. 30 feet). To pair with a different device follow steps 1 - 4 under ”Pairing Your Device” on previous page. 4. When done listening, slide the Power On/Off Switch to OFF turn the unit OFF. Remember to turn off your device, too. Bluetooth/ Speakerphone Button Carry Strap Channel (lantern mode) on Color Mode Button (press and hold for Battery Review) Power On/Off Switch Charging/ Aux-in USB port Lower/Raise Volume Buttons NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. 1. When a call is received, playing music is muted to hear the ring tone and the cabinet lights flash green. Press thexxxBluetooth/Speakerphone Button to answer the call. For call waiting function, press the button again to answer the second call, and once more to return to the original call. 2. When a call is completed, press the Bluetooth/Speakerphone Button to end the call and resume previous function. Getting Started: Carry Strap Playing Audio via Aux In The iBT74 has two channels to attach the included carry strap, one on the bottom to hang the unit like a lantern, and one on the lower back of the unit. To attach the carry strap, form a small loop in one end of the carry strap. Insert this loop through the desired channel, then pull the loop back through the larger loop formed in the carry strap to tighten. OR Charging the Unit Feb 13, 2015 CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING 1. Connect the micro USB plug on the included combination cable to the micro USB Charging/Aux-in USB Port on the side of the unit. 2. Connect the standard USB plug end of the cable to a power USB port on a computer, a USB AC adaptor or other USB charging device. For first time use, charge unit for about 4 hours. The status indicator LED on top of the unit turns solid red while charging and turns off once unit is fully charged. Charge via computer USB port, USB AC adaptor or other powered USB port Feb 13, 2015 iHome iBT74 USB port iHome iBT74 USB port Computer connected to working outlet 1. Connect micro USB charging/audio cable to the Charging/Aux-in USB Port on the side of the unit and connect the 3.5mm audio plug end to the headphone or line-out jack on your audio device. 2. Slide the Power On/Off Switch to ON turn the unit ON. 3. Power on the audio device and use the controls on the device to play or pause audio and to navigate tracks. 4. Press the – or + Button to adjust the system volume. You can also adjust volume on your device. 5. When done listening, slide the Power On/Off Switch to OFF turn the unit OFF. Remember to turn off your device, too. Laptop MP3/MP4 There are six color modes, which you cycle through in this order: a. Slow Fade (colors slowly fade from one into the next b. Fast Change (colors change rapidly) c. One Color (select a favorite color) d. Pulse to Music (lights flash to the beat of the music) e. Preset Pulsing (each light array pulses through its own preset pattern of colors) f. Off (no display) 1. Slide the Power On/Off Switch to ON turn the unit ON. 3. When done, slide the Power On/Off Switch to OFF turn the unit OFF. USB AC adaptor connected to working outlet 3. To review the charging status of the unit while it is charging, press and hold the Button. The cabinet lights will flash for 5 seconds to show charge level. RED Mobile Phone PC/Tablet Game Devices iPod Using Color Modes 2. Press the Color Mode Button repeatedly to cycle to the desired color mode. For One Color mode, first cycle to Fast Change mode and press the Color Mode Button when the desired color appears. For Pulse to Music, make sure the volume on your connected Bluetooth device is above 30%. USB AC adaptor (not included) Declaration ID D024962 Color Mode GREEN Troubleshooting Unit doesn’t respond (no power) • • • • Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT74. Make sure the unit is on Unit doesn’t respond (locked up/ “frozen”) Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit. iHome iBT74 1. Slide the Power On/Off Switch to ON to turn on the unit. The Bluetooth status indicator will glow solid blue when a linked device is in range and detected. You can then listen to audio streamed wirelessly from your paired Bluetooth device. 2. Use controls on your Bluetooth device to play, pause and navigate tracks. 3. Press the – or + Button to adjust the iBT74 volume. You can also adjust volume on your device. Carry Strap Channel off Canada Statement Thank you for purchasing the iHome iBT74. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. For other Speakerphone Operation CAN ICES-3 (B)/NMB-3(B) Introduction iBT74 Front Microphone • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. iHome iBT74 Playing Audio Via Bluetooth This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. iHome iBT74 Meet Your iBT74 FCC ID: EMOIBT74 IC: 986B-IBT74 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference received, including interference that may cause undesired operation This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. 1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check in Options or Settings). • Combination micro USB to USB charging cable/audio in cable Computer USB port Internal Rechargeable Lithium-ion Battery iBT74 Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT74. Once your device is paired, the iBT74 can recognize it and you can play your audio through it. • iBT74 speaker Color Changing Rechargeable Bluetooth Speaker with Speakerphone Using the Pairing Your Device Very Low Low Good High Reviewing Battery Charge Level (Charger is Disconnected) 1. Press and hold the Color Mode Button when unit is not charging to enter Battery Review Mode. The cabinet lights will blink and built-in voice will announce the current battery level. TIP: On some iOS (Apple) devices, you can view the iBT74 battery status on your deviceʼs screen. When device is paired and connected, look for a vertical battery icon next to the Bluetooth icon on the upper right corner of the deviceʼs screen. If the unit does not respond, try resetting the unit. Press and hold bothe the “+” and “–” Buttons at the same time for about 10 seconds. Note that doing so will clear settings, and any Bluetooth devices will need to be re-paired. Trouble pairing device with iBT74 Bluetooth implementation varies depending on your device’s hardware and operating system. Please see our website for updates on pairing. • When you power ON the speaker, it will automatically link with the last previously paired Bluetooth device if the device is still within range (approx. 30 feet). To pair with a different device you must turn off Bluetooth capability on the already paired device, or take it out of range. • If your device does not auto-link when within range, re-pair the device. To do so, first delete the iBT74 from your Bluetooth devices menu. • Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing and linking. For further information and to see the latest instructions, visit www.ihome.com/support 88
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c014 79.156821, 2014/08/29-03:07:50 Format : application/pdf Title : iBT74(EN) IB 0213 Metadata Date : 2015:02:13 10:46:11+08:00 Modify Date : 2015:02:13 10:46:11+08:00 Create Date : 2015:02:13 10:46:11+08:00 Creator Tool : Adobe Illustrator CC 2014 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 80 Thumbnail Format : JPEG Thumbnail Image : (Binary data 4846 bytes, use -b option to extract) Instance ID : uuid:a14e84a2-5728-f348-a0a0-25aec87a6ec0 Document ID : xmp.did:7404b317-b00b-49b1-9ff7-e30375c34810 Original Document ID : uuid:5B20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:3d896c13-9d40-cf4f-af4c-b434f9aeb464 Derived From Document ID : xmp.did:e529f638-a5ab-45db-8dc1-c449a9c4c57d Derived From Original Document ID: uuid:5B20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:FD7F1174072068118083A0F3A15A5CAC, xmp.iid:7404b317-b00b-49b1-9ff7-e30375c34810 History When : 2010:10:12 11:33:38+08:00, 2015:02:13 10:45:53+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CC 2014 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : /Users/joyceyoung/Desktop/2015 models/2015 SDI/iBT74-HM/IB/iBT74 IB cover-r.PSD, /Users/deonleung/Desktop/Pairing screen images/iPhone-connected.psd, /Users/deonleung/Desktop/Pairing screen images/iPhone-not_paired.psd, /Users/deonleung/Desktop/Pairing screen images/other_connect.psd, /Users/deonleung/Desktop/Pairing screen images/other-not_pair.psd, /Volumes/SDI/SDI_Misc/iHome/Quick Start Guide Workgroup/Images/NFC Phone images/NFC setting.png Manifest Reference Document ID : adobe:docid:photoshop:9dc917a6-b227-1177-97d4-8191043daf1c Manifest Reference Instance ID : xmp.iid:329143f5-281b-4149-aa4e-0d3cdb185145 Ingredients File Path : /Users/joyceyoung/Desktop/2015 models/2015 SDI/iBT74-HM/IB/iBT74 IB cover-r.PSD, /Users/deonleung/Desktop/Pairing screen images/iPhone-connected.psd, /Users/deonleung/Desktop/Pairing screen images/iPhone-not_paired.psd, /Users/deonleung/Desktop/Pairing screen images/other_connect.psd, /Users/deonleung/Desktop/Pairing screen images/other-not_pair.psd, /Volumes/SDI/SDI_Misc/iHome/Quick Start Guide Workgroup/Images/NFC Phone images/NFC setting.png Ingredients Document ID : adobe:docid:photoshop:9dc917a6-b227-1177-97d4-8191043daf1c Ingredients Instance ID : xmp.iid:329143f5-281b-4149-aa4e-0d3cdb185145 Startup Profile : Basic CMYK Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 514.350000 Max Page Size H : 384.851981 Max Page Size Unit : Millimeters Font Name : KozGoPro-Regular, ArialMT, ArialNarrow, Futura-Light, Futura-LightOblique, Futura-Book, Futura, Futura-Bold, Futura-Medium, HelveticaNeue-HeavyItalic, HelveticaNeue, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Black Font Family : 小塚ゴシック Pro, Arial, Arial Narrow, Futura, Futura, Futura, Futura, Futura, Futura, Helvetica Neue, Helvetica Neue, Myriad Pro, Myriad Pro, Myriad Pro Font Face : R, Regular, Regular, Light, Light Oblique, Book, Medium, Bold, Medium, 86 Heavy Italic, Regular, Regular, Semibold, Black Font Type : Open Type, Open Type, Type 1, Type 1, Type 1, Type 1, Type 1, Type 1, TrueType, Type 1, TrueType, Open Type, Open Type, Open Type Font Version : Version 4.015;PS 4.004;hotconv 1.0.70;makeotf.lib2.5.58329, Version 3.05, 001.003, 001.000, 001.000, 001.000, 001.000, 001.001, 6.2d2e1, 001.100, 8.0d6e1, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : KozGoPro-Regular.otf, Arial, ArialNar; Arial & Groenig, FuturLig; Futura Light, FuturLigObl; Futura Light, FuturBoo; Futura Book, Futur; Futura, FuturBol; Futura, Futura.ttc, HelveNeuHeaIta; Helvetica NeueLt:Med:Heavy, HelveticaNeue.dfont, MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Black.otf Plate Names : Cyan, Magenta, Yellow, Black, 20% Grey.spot, 40% Grey.spot, 30% Grey.spot, 60% Grey.spot, 10% Grey.spot Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: Deleted Global Color 46 Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 100.000000 Swatch Groups Colorants Magenta : 100.000000 Swatch Groups Colorants Yellow : 100.000000 Swatch Groups Colorants Black : 100.000000 Producer : Adobe PDF library 11.00 Page Count : 1 Creator : Adobe Illustrator CC 2014 (Macintosh)EXIF Metadata provided by EXIF.tools