SDI Technologies ISB04 WiFi Door & Window Sensor User Manual iSB04 Door Window Sensor QSG v10

Download:
Mirror Download [FCC.gov]
Document ID	3532267
Application ID	PVOxM7Ltlpeh1ZtjlienKg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.46kB (230743 bits)
Date Submitted	2017-08-29 00:00:00
Date Available	2017-08-29 00:00:00
Creation Date	2017-08-16 16:37:40
Producing Software	Adobe PDF library 15.00
Document Lastmod	2017-08-16 16:37:40
Document Title	iSB04 Door Window Sensor_QSG_v10
Document Creator	Adobe Illustrator CC 2017 (Macintosh)

Model: iSB04 QSG (English)
Size: 153mm x 98mm
Date : August 16,2017
Pages:
Version:
Accordian style
Quick Start Guide
Model: iSB04
Intelligent Home Solutions
Quick Start Guide
Status LED
Action Button
Apple device running iOS 9.3 or later or Android device running KitKat 4.4
or later connected to your preferred WiFi network
Doors
Main piece
mounted on door.
door
Magnet
Windows
Solid Green:
Flashing Red:
Main piece mounted
on window sash.
Sensor is ready to
connect to a Wi-Fi
network
Gently pull the front of the sensor forward using the battery
access tab on top of the sensor to release the front of the
main unit.
Place the batteries in the battery compartment as shown.
Make sure polarity (+/–) matches the markings in the
product.
glass
Download and open the
iHome Control app from the App Store or Google Play.
Login to or create an iHome account
Magnet Body (side view)
"The two hand test"
sensors icon and then the Add Device Button.
Press
Press and hold the Action Button on your sensor for 5 seconds until green LED is
flashing, then release.
Use one hand to position the main sensor body against the intended mounting surface
(we recommend a flat surface such as the door itself).
Enter the following setup code when prompted in the app.
Use another hand to position the magnet body on the intended mounting surface.
Pull the sensor body away from the magnet to simulate opening the door/window.
(Perform this test before mounting your sensor).
If you hear 2 beeps your proposed mounting location is GOOD and you can proceed to
mount your sensor with the adhesive tape. If no sound is heard you must try an alternate
positioning.
NOTE: If you see a solid or flashing RED LED, press and hold the Action Button
for 5 seconds and then repeat steps 2 and 3
Ensure the door/window can open/close freely without interfering with your sensor. Peel
back the adhesive strip and press sensor against the surace for 20 seconds to ensure a
good bond. NOTE: tape should be adhered to a clean/dry surface. We strongly recommend wiping with rubbing alcohol or soapy water to allow for the strongest bond.
Notices
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To assure continued FCC compliance:
1.
IC
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between the radiator and your body.
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment.
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Cet appareil radio est conforme au CNR-247d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux
deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter
tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du
dispositif.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre
corps.
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking,
discolored, deformed, or in any way abnormal.
• Do not mix old and new batteries
• Use onlynew batteries of the type recommended
• Avoid charging a rechargeable battery when the temperature is not within
5°C - 35°C (41° - 95° Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery
pack in an unventilated vehicle
where excessive internal temperatures may be encountered.
• Always keep batteries out of the reach of infants and small children.
• Remove batteries if device will not be used for a prolonged period to avoid corrosion which
can damage the unit
• Dispose of batteries that are leaking
Dispose of batteries in accordance with local regulations
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
Do not mount
on hinge side.
Do not mount
both pieces on door.
Mount pieces on
different sashes.
*Mounting options are not limited to the suggestions in these images
Do not block path
of sliding parts.
The strip of tape can be applied to the side OR top of the magnet body, whichever works best
for your particular setup.
Sensor failed setup,
please try setup again.
Meet the iHome Control family of
Intelligent Home solutions
The main sensor body includes mounting tape. A separate strip of tape is provided to mount
the magnet.
Press the front and back cabinet together.
2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
Main piece mounted
on moulding.
NOTE: We recommend performing setup in the same location you intend to
place your sensor.
NOTE: When typing, dashes are not required
Sensor is connected
to a Wi-Fi network
(appears briefly
after setup)
iHome Control provides 24-7 remote home monitoring from anywhere. The free iHome
Control app keeps you aware of changes in your home environment even when you’re
not home. For information about compatible products and to purchase Sensors and
SmartPlugs, visit iHome.com.
glass
moulding
Main piece
mounted on frame.
Flashing Green:
www.ihome.com
Sensor Placement Suggestions*
frame
Wi-Fi Status Indicators
Main Body
NOTE: If you intend to use a mix of devices (iOS AND Android), please set up
the Sensor using your iOS device and then share to your Android device(s).
Sensor Mounting
Wi-Fi Setup
• iSB04 Door/Window Sensor (main body and magnet)
Battery Access Tab
WiFi network transmitting at 2.4GHz; WPA2 security type
BACK
What’s in the Box
Sensor Overview
WHAT YOU’LL NEED
1.800.288.2792
Your sensor comes with 2 AA batteries which must be installed before use.
• 2 AA batteries (see page 2 for battery installation instructions)
Monitor your home from anywhere with your smartphone
Questions?
• Adhesive Mounting Strip (see page 4 for mounting instructions)
Wi-Fi DOOR/WINDOW SENSOR
FRONT
Overview: About Your Door/Window Sensor
Installing Batteries
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-(B)/NMB-3(B)
For warranty information:
visit https://www.ihomeaudio.com/support/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42
Format                          : application/pdf
Metadata Date                   : 2017:08:16 16:37:40-04:00
Modify Date                     : 2017:08:16 16:37:40-04:00
Create Date                     : 2017:08:16 16:37:40-04:00
Creator Tool                    : Adobe Illustrator CC 2017 (Macintosh)
Instance ID                     : uuid:657cd194-3916-4c44-8898-ab49e292195a
Document ID                     : xmp.did:1ff652bb-3265-4179-8079-83dd8aa3d406
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Producer                        : Adobe PDF library 15.00
Title                           : iSB04 Door Window Sensor_QSG_v10
Thumbnail Width                 : 256
Thumbnail Height                : 80
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 8640 bytes, use -b option to extract)
Derived From Instance ID        : uuid:e525370e-41b8-3b4e-9786-a66e80f3f354
Derived From Document ID        : xmp.did:0c544168-ecb5-4f75-9651-cacec636e97a
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:0c544168-ecb5-4f75-9651-cacec636e97a, xmp.iid:1ff652bb-3265-4179-8079-83dd8aa3d406
History When                    : 2017:08:16 15:49:03-04:00, 2017:08:16 16:37:34-04:00
History Software Agent          : Adobe Illustrator CC 2017 (Macintosh), Adobe Illustrator CC 2017 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Volumes/SDI-1/SDI_Misc/iHome Control/iSB Wi-Fi Sensors/iSB04 - door window/QSG/iSB04 side view magnet only.png, /Volumes/SDI-1/SDI_Misc/iHome Control/iSB Wi-Fi Sensors/iSB02 - leak/QSG/house_english.jpg, /Volumes/SDI-1/SDI_Misc/iHome Control/iSB Wi-Fi Sensors/iSB01 - motion/QSG/TBIconBPS@3x.png, /Volumes/SDI-1/SDI_Misc/iHome Control/iSB Wi-Fi Sensors/iSB04 - door window/QSG/iSB04 front view.png
Manifest Reference Document ID  : adobe:docid:photoshop:331ab904-c253-117a-8aa3-a27e5f64735c, xmp.did:a983d10d-f123-4153-b9e7-961d6869a99d, 0, adobe:docid:photoshop:7a22a0e1-b8f4-117a-8aa3-a27e5f64735c
Manifest Reference Instance ID  : xmp.iid:10d49cbb-364c-47d6-8de5-8ba8843f7ac2, xmp.iid:a983d10d-f123-4153-b9e7-961d6869a99d, 0, xmp.iid:760427b3-661f-4e2a-8067-fba67090c097
Ingredients File Path           : /Volumes/SDI-1/SDI_Misc/iHome Control/iSB Wi-Fi Sensors/iSB04 - door window/QSG/iSB04 side view magnet only.png, /Volumes/SDI-1/SDI_Misc/iHome Control/iSB Wi-Fi Sensors/iSB02 - leak/QSG/house_english.jpg, /Volumes/SDI-1/SDI_Misc/iHome Control/iSB Wi-Fi Sensors/iSB01 - motion/QSG/TBIconBPS@3x.png, /Volumes/SDI-1/SDI_Misc/iHome Control/iSB Wi-Fi Sensors/iSB04 - door window/QSG/iSB04 front view.png
Ingredients Document ID         : adobe:docid:photoshop:331ab904-c253-117a-8aa3-a27e5f64735c, xmp.did:a983d10d-f123-4153-b9e7-961d6869a99d, 0, adobe:docid:photoshop:7a22a0e1-b8f4-117a-8aa3-a27e5f64735c
Ingredients Instance ID         : xmp.iid:10d49cbb-364c-47d6-8de5-8ba8843f7ac2, xmp.iid:a983d10d-f123-4153-b9e7-961d6869a99d, 0, xmp.iid:760427b3-661f-4e2a-8067-fba67090c097
Max Page Size W                 : 899.999611
Max Page Size H                 : 299.998694
Max Page Size Unit              : Millimeters
Font Name                       : Gotham-Light, Gotham-LightItalic, Gotham-Book, Gotham-BookItalic, Gotham-Medium, Gotham-MediumItalic, ArialMT, MyriadPro-Regular
Font Family                     : Gotham, Gotham, Gotham, Gotham, Gotham, Gotham, Arial, Myriad Pro
Font Face                       : Light, Light Italic, Book, Book Italic, Medium, Medium Italic, Regular, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 2.201 Pro, Version 2.201 Pro, Version 2.201 Pro, Version 2.201 Pro, Version 2.201 Pro, Version 2.201 Pro, Version 5.06, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : Gotham-Light.otf, Gotham-LightItalic.otf, Gotham-Book.otf, Gotham-BookItalic.otf, Gotham-Medium.otf, Gotham-MediumItalic.otf, ArialMT.ttf, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Slug Family                     : Arial
Slug Version                    : 5.06
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Monotype Typography
Slug Font Kind                  : OpenType - TT
Slug Checksum                   : 1252007918
Slug Post Script Name           : ArialMT
Slug Font Sense 12 Checksum     : 1252007918
Page Count                      : 1
Creator                         : Adobe Illustrator CC 2017 (Macintosh)

EXIF Metadata provided by EXIF.tools