SDI Technologies ISS50 Smart Console User Manual iSS50 2016 QSG 06302016
SDI Technologies Inc. Smart Console iSS50 2016 QSG 06302016
User Manual
Model: iSS50 Intelligent Home Solutions Quick Start Guide SMARTMONITOR (Smart Console) Control your SmartMonitor from anywhere with your smartphone WHAT YOU’LL NEED WiFi network transmitting at 2.4GHz1 Apple device running iOS 9.0 or later or Android device running Jelly Bean 4.2 or later connected to your preferred WiFi network NOTE: If you intend to use a mix of devices (iOS AND Android), please set up the SmartMonitor using your iOS device and then share to your Android device(s). (this page intentionally blank) Quick Start Setup iHome Control app from the App Store or Google Play. Download and open the Connect SmartMonitor to power using included cable and adapter. The will start flashing to indicate it is ready for setup. Tap Add Device ... in the Devices tab and follow the on-screen directions to complete setup. When prompted, scan or type the Accessory Setup Code below: icon NOTE: when typing, dashes are not required Success! You should now be able to monitor your home environment using the iHome Control app. More SmartMonitors to set up? Repeat from Step 2 SmartMonitor Overview BACK OF UNIT Wi-Fi Status Temperature Sound Indicator Motion Indicator dimmer power in reset Humidity To dim the LCD screen, tap the DIMMER button. To reset the SmartMonitor, press and hold the SETUP button for a full 15 seconds. Wi-Fi Status Indicator Flashing: SmartMonitor is ready for setup Flashing: SmartMonitor is searching for a Wi-Fi network Solid with Border: SmartMonitor is connected (Use the iHome Control app to reconfigure network settings) Sharing Now that you’ve successfully completed setup, you may want to gain/share access to your SmartMonitors on different devices. Please follow the chart below: Grant Access to iOS Devices w/ the same iCloud account w/ different iCloud accounts Download and launch the iHome Control app on other device(s) and wait for the SmartMonitor(s) to appear Tap Sharing in the Settings section of the iHome Control app and follow instructions NOTE: If you chose to set up an iHome account, use the same login on both devices Download and launch the iHome Control app on other devices(s) Accept invitation on other device(s) Grant Access to Android Devices option 1 Download and launch the iHome Control app on other device(s) and sign in with your existing iHome account credentials option 2 Tap Sharing in the Settings section of the iHome Control app and follow instructions Download and launch the iHome Control app on other device(s) Accept invitation on other device(s) NOTE: sharing works from iOS to iOS, iOS to Android, and Android to Android 4 More About Your SmartMonitor Your SmartMonitor is compatible with iHome SmartPlugs2. For information about compatible products and to purchase SmartPlugs, visit iHome.com. Example Uses: Set rule to automatically turn on fan or air conditioner (connected to SmartPlug) when SmartMonitor detects a certain temperature Set rule to turn on lamps (connected to SmartPlug) when SmartMonitor detects motion And more! Third Party Connections We’re constantly striving to build useful integrations for iHome Control products. Visit the Settings section of the iHome Control app for the latest information. HomeKit (iOS only) The SmartMonitor is compatible with Apple HomeKit technology. Create your own custom scenes to automatically control your home including any HomeKit-enabled accessory. Use the Apple Home app to configure scenes and automation. Example Configurations Room temperature dropped below 65˚ SmartMonitor triggers a HomeKit-enabled thermostat to turn on the heating system. Movement is detected in the foyer SmartMonitor detects motion, triggers a scene to turn on lights. Light sensor on SmartMonitor senses it is dark outside Triggers user-defined “Night” Scene which closes the garage door, lowers the blinds and locks the doors. And more! 6 Things to Know We recommend placing your SmartMonitor away from direct sunlight and/or air conditioning vents. This will ensure the most accurate temperature and humidity readings for your home environment. The SmartMonitor will auto-calibrate to your home environment. It may take up to 2 hours for temperature/humidity readings to be accurate. Motion detection is dependent on room conditions and lighting. An accurate reading occurs when a subject crosses in front of the SmartMonitor. For optimal sensing, we recommend positioning the front of SmartMonitor in the direction you want to cover. Detection is accurate up to 20ft but may exceed that in certain conditions. The SmartMonitor Sound and Light detection sensitivity thresholds can be adjusted using the iHome Control app. The SmartMonitor can detect “room occupancy” using Sound or Motion. To define room occupany time thresholds, use the iHome Control app. Use the iHome Control app to determine when you want to receive notifications to your phone about changes in your home environment. Notes 1 All Wi-Fi routers support 2.4GHz spectrum. If your router was deliberately set to only transmit 5GHz, then please note that the SmartMonitor will not work properly on your network. Enterprise networks (such as in colleges and businesses) often have more restricted security settings that may impact the performance of your SmartMonitor. When using iHome SmartPlugs with the SmartMonitor, please note that the SmartPlug supports devices or appliances up to 1800 Watts. Please consult the owner’s manual of your device. Connected device requires a manual on/off switch. Electrical Ratings 5V 1A Safety Warnings For indoor use only Disconnect cable from SmartMonitor before cleaning with a warm damp cloth DO NOT use solvents DO NOT clean with liquid DO NOT use in wet or damp areas Keep children away from SmartMonitor 8 Notices FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To assure continued FCC compliance: 1. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 9 IC This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Legal Use of the HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Controlling HomeKit-enabled accessories, with features like Siri, away from home requires an Apple TV (3rd generation or later) with Apple TV software 7.0 or later and an iPhone, iPad, or iPod touch with iOS 9.0 or later. Wink is a registered trademark. Nest®, Nest Learning Thermostat and the Works with Nest logos are trademarks licensed by Nest Labs, Inc. Amazon Echo is a trademark of Amazon.com, Inc. or its affiliates. For warranty information: visit https://www.ihomeaudio.com/support/ © 2016 SDI Technologies, Inc. All rights reserved. iSS50_2016_QSG_v1 FCC CONFORMITÉ AUX RÈGLES DE LA FCC : Cet équipement a été testé et déclaré conforme aux spécifications de la Classe B des appareils numériques, conformément au chapitre 15 des règles de la FCC. Ces limites ont été définies pour assurer une protection suffisante contre les interférences nuisibles aux installations domestiques. Cet équipement génère, utilise et peut émettre des ondes radioélectriques et, s’il n’est pas installé et utilisé conformément aux instructions, peut provoquer des interférences nuisibles aux communications radio. Toutefois, rien ne garantit qu’une installation particulière ne subira aucune interférence. Si cet équipement produit des interférences nuisibles à la réception de la télévision ou de la radio, ce dont il est possible de s’assurer en allumant et en éteignant l’équipement, il est recommandé de tenter de régler le problème à l’aide d’une ou plusieurs des solutions suivantes :• Réorienter ou déplacer l’antenne de réception. • Éloigner l’équipement du poste de réception. • Brancher l’équipement sur une prise d’un circuit différent de celui sur lequel est branché le poste de réception. • Contacter le revendeur de l’équipement ou un technicien spécialiste du matériel télévisé et radiophonique.Cet appareil est conforme au chapitre 15 des règles de la FCC. Son utilisation est soumise aux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences dangereuses, et (2) cet appareil doit tolérer les interférences reçues, y compris les interférences qui pourraient en déranger le fonctionnement.REMARQUE : les changements ou modifications apportés à cet appareil qui ne sont pas approuvés expressément par le responsable de la conformité peuvent annuler le droit de l'utilisateur à utiliser l'équipement.INFORMATIONS IC RELATIVES À L'IC : Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.CAN ICES‐3(B)/NMB‐3(B) Questions? 1•800•288•2792 www.ihome.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Format : application/pdf Title : iSS50_2016_QSG_06302016 Metadata Date : 2016:08:29 14:49:04+08:00 Modify Date : 2016:08:29 14:49:04+08:00 Create Date : 2016:06:30 17:42:08+08:00 Creator Tool : Adobe Illustrator CC 2015 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 24 Thumbnail Format : JPEG Thumbnail Image : (Binary data 2873 bytes, use -b option to extract) Instance ID : uuid:9e598659-c002-47e1-bf11-53eff2612965 Document ID : xmp.did:2d5b888e-f1fb-45b9-8806-7d6039b9fc00 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:1d695860-0a93-496a-bf0b-c182f98d85f5 Derived From Document ID : xmp.did:1d695860-0a93-496a-bf0b-c182f98d85f5 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:8b7bec70-0c15-42e4-bf5c-593d590e5321, xmp.iid:2d5b888e-f1fb-45b9-8806-7d6039b9fc00 History When : 2016:01:27 14:44:26-05:00, 2016:06:30 17:41:58+08:00 History Software Agent : Adobe Illustrator CC 2015 (Macintosh), Adobe Illustrator CC 2015 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : /Volumes/MAC_USERS/CharlieLaw/Desktop/Artwork/01_SDI/ iSS50/iSS50_2016_QSG_v1_Folder/Links/plug_wall.jpg, /Volumes/MAC_USERS/CharlieLaw/Desktop/Artwork/01_SDI/ iSS50/iSS50_2016_QSG_v1_Folder/Links/iSS50.728.psd Manifest Reference Document ID : adobe:docid:photoshop:bea9e8c8-e019-1178-812a-d120221a641b, adobe:docid:photoshop:69858e69-6a88-1179-b925-935baaa158d8 Manifest Reference Instance ID : xmp.iid:5c22a17d-42cd-4e0a-8128-42d2aec42adf, xmp.iid:9d46679a-c267-4a4c-9e63-c97c03ebc82a Ingredients File Path : /Volumes/MAC_USERS/CharlieLaw/Desktop/Artwork/01_SDI/ iSS50/iSS50_2016_QSG_v1_Folder/Links/plug_wall.jpg, /Volumes/MAC_USERS/CharlieLaw/Desktop/Artwork/01_SDI/ iSS50/iSS50_2016_QSG_v1_Folder/Links/iSS50.728.psd Ingredients Document ID : adobe:docid:photoshop:bea9e8c8-e019-1178-812a-d120221a641b, adobe:docid:photoshop:69858e69-6a88-1179-b925-935baaa158d8 Ingredients Instance ID : xmp.iid:5c22a17d-42cd-4e0a-8128-42d2aec42adf, xmp.iid:9d46679a-c267-4a4c-9e63-c97c03ebc82a Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 188.383333 Max Page Size H : 136.927955 Max Page Size Unit : Millimeters Font Name : Gotham-BookItalic, Gotham-Book, ArialMT, Gotham-LightItalic, Gotham-Light, Gotham-MediumItalic, Gotham-Medium Font Family : Gotham, Gotham, Arial, Gotham, Gotham, Gotham, Gotham Font Face : Book Italic, Book, Regular, Light Italic, Light, Medium Italic, Medium Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Type 1 Font Version : Version 2.201 Pro, Version 2.201 Pro, Version 5.01.2x, Version 2.201 Pro, Version 2.201 Pro, Version 2.201 Pro, 001.000 Font Composite : False, False, False, False, False, False, False Font File Name : Gotham-BookItalic.otf, Gotham-Book.otf, Arial.ttf, Gotham-LightItalic.otf, Gotham-Light.otf, Gotham-MediumItalic.otf, GothaMed; Gotham-Medium Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 15.00 Slug Family : Gotham Slug Version : 2.201 Slug Outline File Size : 0 Slug Kerning Checksum : 0 Slug Foundry : -- Slug Font Kind : OpenType - PS Slug Checksum : 3850012836 Slug Post Script Name : Gotham-MediumItalic Slug Font Sense 12 Checksum : 3850012836 Page Count : 13 Creator : Adobe Illustrator CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools