SDR Electronics 1131 Car charger and FM transmitter for iPod and iPhone User Manual P1131 620 itripautoSE userguide
SDR Electronics Car charger and FM transmitter for iPod and iPhone P1131 620 itripautoSE userguide
Contents
- 1. Manual P1131
- 2. Manual P1238
Manual P1131
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 996110 |
| Application ID | hsjmMb8I6AbE20wHVYOfEg== |
| Document Description | Manual P1131 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 70.71kB (883858 bits) |
| Date Submitted | 2008-09-05 00:00:00 |
| Date Available | 2008-09-05 00:00:00 |
| Creation Date | 2008-07-10 17:04:48 |
| Producing Software | Adobe PDF library 8.00 |
| Document Lastmod | 2008-09-04 13:37:42 |
| Document Title | P1131_620 itripautoSE_userguide |
| Document Creator | Adobe Illustrator CS3 |
iTrip Auto iTrip Auto ® ® user guide iTrip Auto ® user guide To recall a preset: User Guide ® Thank you for purchasing iTrip Auto, the easy way to listen to your iPod through your car’s FM radio. iTrip Auto gets its power from your car’s cigarette lighter or 12 volt accessory socket, and charges your iPod as you listen. iTrip is an FM transmitter for iPod. It works by broadcasting your music wirelessly to your car’s FM radio, allowing you to listen through your stereo speakers. iTrip setup and operation is an easy 3-step process. Here’s how to get started: Quick Setup Using SmartScan 1. Press and hold the SmartScan button until a preset number begins to flash. SmartScan 2. Use iTrip’s + and – buttons to select the desired number. 3. When the desired number is showing on iTrip’s display, press the SmartScan button again, or just wait 3 seconds and iTrip will switch to the current preset. DX SmartScan DX SmartScan 3. Tune your FM radio to the same frequency, now showing on iTrip’s display. www.griffintechnology.com/support/ Technical Specifications DX SmartScan 2. Select LX or DX by pressing the + or – buttons. Then wait 2 seconds and iTrip will begin operating in the mode you have chosen. 3. Use iTrip’s + and – buttons to tune it to the same frequency as your radio. (You can press and hold the buttons to scan through the frequencies quickly.) When you reach the desired frequency, release the button and iTrip will lock into that frequency automatically. Troubleshooting DX SmartScan FM Radio Is it on? Your music will now be playing through your speakers. Set your radio’s volume controls to a comfortable listening level. Using iTrip Auto’s Presets DX You can save the best frequencies as presets for easy recall. SmartScan 1. Tune iTrip Auto to the frequency you want to save. 2. Press and hold the SmartScan button until a preset number begins to flash (1, 2, 3, or 4 on the iTrip display). 3. Select the desired preset location (1, 2, 3, or 4) by pressing the + or – buttons repeatedly. When the screen shows the desired number, press the SmartScan button again and hold it for 3 seconds. iTrip has now saved the current frequency to this preset number. Problems? No problem. Here’s what to do: Dimensions: .47” (12mm) x 1.10” (28mm) x 2.6” (66mm) Weight: 2 oz. (56g) Antenna: Built-in Modulation: FM Stereo For cars that do not automatically shut off power to the 12 volt accessory sockets, iTrip Auto includes a power switch on the power plug. Press the switch to turn off power to iTrip and to your player. 2. Tune your FM radio to a frequency at which you hear nothing but static. An ideal choice would be one with static on either neighboring frequency. iTrip works with iPod models from 4th generation and up. Total length including cable: 40” (100cm) Power Switch Problem's not solved? Your call will be answered by real human beings who actually know and use Griffin products. How To Set iTrip Manually 1. Plug iTrip into your iPod and your car’s power socket and begin playing music, as in Quick Setup. 3-stage Light Ring RED: iTrip on AMBER: charging GREEN: charged Available output RF ranges (region preset at factory): U.S.: 88.1 MHz ± 107.9 MHz Japan: 76.0 MHz ± 90.0 MHz Other Countries: 88.0 MHz ± 108.0 MHz Radio Frequency Adjustment Increments: Japan: 0.1 MHz per step U.S. and Other Countries: 0.2 MHz per step Radio Frequency Response: 50 Hz ± 15 KHz Is it tuned to an open, unused frequency? Operating Range: 10 – 30ft (3 – 9.1m) Is its volume correctly adjusted? Power: Provided by 12 Volt cigarette lighter/accessory socket (no batteries required) iPod Is its Hold Switch on? Most cars use a No problem. Call Griffin's Customer Support at 800-208-5996. Monday - Thursday 9 am - 6 pm and Friday 9am - 5pm Central time. iTrip lets you switch between LX (Stereo) and DX (Mono) modes. In general, Mono mode produces a stronger signal, better able to cut through in populated areas where lots of radio stations crowd the dial. Since audio content such as audio books and spoken word will sound much the same in either stereo or mono, you may choose to listen in mono. To switch between stereo and mono: 1. Press and hold iTrip’s + and – buttons until you see LX or DX begin to blink in iTrip’s display (approximately 8 seconds). Fuses Check your car’s fuse (consult your owner’s manual for the fuse location) and replace if necessary. replaceable fuse to protect the cigarette lighter or accessory circuits. iTrip is protected against power surges by means of an automatic circuit-breaker, or "smart fuse. " If you are certain that iTrip is receiving power through your 12 volt socket but refuses to power on, unplug iTrip from your 12 volt socket and wait 15 seconds. This resets iTrip's smart fuse. LX/DX Mode for Best Sound 1. Plug iTrip into your player’s dock connector and begin playing some music (though you won’t hear anything yet). Plug iTrip’s power adapter into your car’s cigarette lighter or 12 volt accessory socket. 2. Press iTrip’s SmartScan button. In only a few seconds, SmartScan finds an available FM frequency for you. DX Fuse Type: resetable internal fuse Have you pressed Play? iTrip Is it fully connected with your iPod? SmartScan SmartScan Is it tuned to the same frequency showing on your radio? This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. Is it in Automatic Shutoff mode? If iTrip experiences an extended period of quiet or silence, it could go into low power mode. To wake it back up, restart music on your iPod, or disconnect and re-connect your iTrip from the power outlet. Cet appareil respecte la section 15 des règlements FCC et la norme RSS-210 d'Industrie Canada. Le fonctionnement de l’appareil est soumis aux deux conditions ci-dessous : (1) Cet appareil ne peut provoquer aucune interférence nuisible et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de provoquer un fonctionnement indésirable. Le fabricant ne peut être tenu responsable des interférences radio ou télé éventuelles causées par des modifications non autorisées de ce matériel. Toute modification non autorisée est susceptible de rendre nul le droit de l’utilisateur à user de ce matériel. Is the Power Switch off? The round button on iTrip’s power adapter knob is a power switch that allows you to shut down both iTrip and the connected iPod; useful in cars that do not automatically shut off power to their cigarette lighter or accessory socket when the car ignition is turned off. We stand behind every product with the industry’s best customer service, backed by a simple, fair warranty. Using this product signifies your acceptance of the terms of the warranty, so please read our warranty details at www.griffintechnology.com/support/ before using this Griffin product. © 2008 Griffin Technology, Inc. • www.griffintechnology.com • iTrip is a registered trademark of Griffin Technology, Inc. • SmartScan is a trademark of Griffin Technology, Inc. iPod is a trademark of Apple, Inc., registered in the U.S. and other countries • Patent Pending • Made in PRC • Designed in Tennessee Please recycle this package. Thanks!
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:16:18 Format : application/pdf Title : P1131_620 itripautoSE_userguide Creator Tool : Adobe Illustrator CS3 Create Date : 2008:07:10 17:04:48-05:00 Modify Date : 2008:09:04 13:37:42-05:00 Metadata Date : 2008:09:04 13:37:42-05:00 Thumbnail Width : 256 Thumbnail Height : 188 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13100 bytes, use -b option to extract) Document ID : uuid:610DE4C53250DD11945E974F1B6CABE0 Instance ID : uuid:a981f63d-5d1a-3047-996d-fcb06686abd2 Derived From Instance ID : uuid:600DE4C53250DD11945E974F1B6CABE0 Derived From Document ID : uuid:AAEC45F2504FDD11861AE95B1DB457FE Startup Profile : Print N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 1559.060059 Max Page Size H : 1133.859985 Max Page Size Unit : Points Font Name : DIN-Bold, DIN-BoldAlternate, DIN-Light, DIN-Medium, DIN-MediumAlternate, DIN-Regular Font Family : DIN Bold, DIN BoldAlternate, DIN Light, DIN Medium, DIN MediumAlternate, DIN Regular Font Face : Bold, BoldAlternate, Light, Medium, MediumAlternate, Regular Font Type : Unknown, Unknown, Unknown, Unknown, Unknown, Unknown Font Version : Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032 Font Composite : False, False, False, False, False, False Font File Name : MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 158 C, PANTONE 7463 C, White Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE 158 C, PANTONE 7463 C, White Swatch Colorant Type : SPOT, SPOT, SPOT Swatch Colorant Tint : 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : RGB, RGB, RGB Swatch Colorant Red : 245, 0, 255 Swatch Colorant Green : 128, 52, 255 Swatch Colorant Blue : 36, 94, 255 Producer : Adobe PDF library 8.00 Page Count : 1 Container Version : 11 Creator Version : 13 Creator : Adobe Illustrator(R) 13.0 For : Jeff Altheide, Bounding Box : 0 0 1560 1134 Image Height : 1134 Image Width : 1560 Image Size : 1560x1134 Megapixels : 1.8EXIF Metadata provided by EXIF.tools