SEA COM SEA157S VHF Marine Radiotelephone/Class A DSC GMDSS User Manual RF exposure safety warning for operators manual

Download:
Mirror Download [FCC.gov]
Document ID	1435938
Application ID	tQIuJaRmbyfvNHyPZQoY/A==
Document Description	RF exposure safety warning for operators manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	0.93kB (11608 bits)
Date Submitted	2011-03-22 00:00:00
Date Available	2014-10-27 00:00:00
Creation Date	2011-03-22 13:55:15
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2011-03-22 13:55:23
Document Title	RF exposure safety warning for operators manual
Document Creator	Acrobat PDFMaker 8.1 for Word
Document Author:	Katia

Physical Mounting:
Select a mounting location where the unit is easily accessed. Mount the unit
in the desired position using the provided Trunnion mount or flush
mounting kit. See Figures 1.2 and 1.3.
Power supply wiring:
CAUTION: Make sure that the provided fuse holder is installed on the
power cord between the radio and the power source, and that the
proper sized fuse (7.5A) is installed.
Use a 12 volt +30%/-10% (10.8 to 15.6VDC) DC power source for proper
operation. Do not exceed 16.0 volts. Direct connection to the battery is
recommended. Connect the heavy red wire, with in-line fuse installed, to
the positive (+) terminal and the heavy black wire to the negative (-)
terminal. Negative ground is required for the USA/Canada version of the
SEA 157S.
CAUTION: If the polarity of the power wires is reversed (Black to
positive, Red to negative), and power is accidentally applied to the radio,
the in-line fuse will blow. It is possible that damage could also occur to
some internal components. Application of voltages greater than 16.0 volts
will produce the same result. (Refer service to a qualified technician.)
Antenna installation and RF Exposure Safety Warning:
To comply with FCC Limits for Human Exposure to Radiofrequency
Electromagnetic Fields for General Population/Uncontrolled Exposure, the
antenna must be mounted in such a manner as to prevent passengers or
personal from coming within 1 meter (39.4 inches) of the radiating portion
of the antenna. (Re: FCC OET Bulletin 65, Section 4, Public Exposure)
Antenna wiring:
Use only the best available 50 ohm coaxial antenna cable and connectors.
The antenna must be vertically polarized. Check the antenna system for less
than 1.5:1 VSWR with an in-line wattmeter before final installation. The
antenna cable PL-259 connector should be tightly fastened to the antenna
connector on the back of the unit. All antenna connections should be
carefully protected from the weather.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Company                         : SEA Inc.
Source Modified                 : D:20110322204629
Creator Tool                    : Acrobat PDFMaker 8.1 for Word
Modify Date                     : 2011:03:22 13:55:23-07:00
Create Date                     : 2011:03:22 13:55:15-07:00
Metadata Date                   : 2011:03:22 13:55:23-07:00
Document ID                     : uuid:58e5f809-ee89-4c7c-bcfb-bc744eee3054
Instance ID                     : uuid:9faf185f-2356-4c6c-b368-05f68d6545bc
Subject                         : 5
Format                          : application/pdf
Creator                         : Katia
Title                           : 
Page Count                      : 1
Page Layout                     : OneColumn
Language                        : EN-US
Author                          : Katia

EXIF Metadata provided by EXIF.tools