SECOM TWSECOMOPC002C Access Reader User Manual 20171201 OPC001C 2C

Download:
Mirror Download [FCC.gov]
Document ID	4019680
Application ID	73/C+SaGLpK1zodbpE4U3g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.05kB (288105 bits)
Date Submitted	2018-09-26 00:00:00
Date Available	2018-09-27 00:00:00
Creation Date	2018-01-05 17:30:39
Producing Software	GPL Ghostscript 8.70
Document Lastmod	2018-09-25 10:24:17
Document Title	20171201_OPC001C_2C
Document Creator	PDFCreator Version 0.9.9
Document Author:	973050

OPC001C/OPC002C User Manual
Overview：
：
This product is designed for the RFID card reader which is used in access control
management system. With RS485 or network communication function, a large
amount of storage space can be used to store card information, according to the
authority of the card to determine the door lock action.
Function Description：
：
1) Save card data and parameters in SRAM / Flash / EEPROM. Firmware updating
operation can be completed through RS232 / Ethernet communication.
2) Two-color LED indicator：
- Blue light is always on: Power status
- Blue light flashes 1 time: read the card status is normal
- Red light flash 3 times: read the card's status is abnormal
- Flashing blue and red alternately: system error (e.g. communication error and
device back cover open).
3) LCD Display：
- Chinese / English LCD Display:
- English message shows 4 row * 16 column
- Chinese message shows 4 row * 8 column
- Display Name: Company Name, Date, Card Identification Number, Operation
Status, and Work / off work Status.
4) Support MIFARE card：
- Support format ISO14443-A, ISO14443-B and so on
5) Built-in Storage Space：
-EEPROM：Used for device parameter storage
-SRAM：Used to store device parameters, card number and operation record
- Flash：Used to save the card number, operation record and firmware update
6) Keypad：
- A total of 16 keys：
10 Number keys：0 - 9
6 Function keys：F1、F2、F3、F4、Cancel key、Enter key
7) Communication Interface：
- RS-485 & Ethernet communication interface(10/100Base-T)
8) Input/Output Port：
-Input Port：Door Sensor、Exit Button、Case Sensor
-Output Port：Door Lock / Alarm or Siren
9) Date and Time Setting / Cover Open Detection / Buzzer / 3V Battery(CR2032)：
- Cover Open Detection：Prevent the machine from being damaged.
- buzzer：With the use of the keypad pressing, card status, device communication
anomalies, etc.
-3V Battery(CR2032)：External power is used to maintain time-clock operating
and keep data in SRAM IC. Battery continuously works for six months.
10) DIP Switch：
-PIN #1、PIN #2、PIN #3、PIN #4 ：Reserve
-PIN #5；Switch On. Management card can be used to activate the access control
card machine function settings.
Main Board Interface Description：
：
Coin Battery
DIP Switch
Ethernet Interface
Mini USB Interface
Setting Normally Open (NO)
or Normally Closed (NC)
Output Switch Selection
RS485 / Power Supply
Interface
DI/DO Interface
1) RS485 / Power supply Interface (Terminal Wire)
Define PIN (5-Pin)
Name
Wire Color
Function Description
+12
Red
DC 12V INPUT
Black
GND
UL+
Blue
RS485
L+
UL-
White
RS485
L-
Brown
RS485 GND
Name
Wire Color
Function Description
DL+
Orange
RS485
L+
DL-
Brown
RS485
L-
Black
RS485 GND
Define PIN (3-Pin)
2) DI/DO Interface(Terminal Wire)
Wire Color
Name
Function Description
1 RL1NO
Blue
DO1 RELAY
NO
2 RL1C
Blue
DO1 RELAY
COM
3 RL2NO
Pink
DO2 RELAY
NO
4 RL2C
Pink
DO2 RELAY
COM
5 RL3NO
Green
DO3 RELAY
NO
6 RL3C
Green
DO3 RELAY
COM
7 SN1
Gray
DI1 Detect the input
signal
DI2 Detect the input
8 SN2
Purple
signal
DI3 Detect the input
9 SN3
Brown
signal
10 G
Black
DI common ground
3)Ethernet interface (Terminal Wire)
Name
Wire Color
Function Description
1 RX+
Green&White
Data reception +
2 RX-
Green
Data reception -
3 TX+
Orange&White
Data transmission +
4 TX-
Orange
Data transmission -
OPC-001C/2C Specification
Model No.
OPC-001C
OPC-002C
ISO/IEC14443A/MIFARE
ISO/IEC 14443B,
Read Format
ISO/IEC14443A/MIFARE
ISO/IEC 15693, JIS X 6319-4
(comparable with FeliCa)
Cardholders
16,000 (max)
20,000 (max)
Read Range
3-5 (max )
Input Ports
3 Sensors
Output Port
Relay x 3
LED Indicator
Power / Comm.
LCD Display
128 x 64 Dot. Graphic Display with backlight
Keypad
16 Key (F1-F4, 0-9, Cancel, Enter)
Real Time Clock
Yes
Beep Tone
Buzzer
Tamper switch
Yes
Power Input
DC 12V / 1A
Current Consumption
250mA(max)
Comm. Interface
RS-485 / TCP/IP
Comm. Baudrate
RS-485：9,600/19,200 bps-N-8-1, TCP/IP：10/100 Mbps
Operating Temp.
0° C ~ 55° C / 32° F ~ 131° F
Relative Humidity
20% ~ 90%
Dimension
150mm(L)，100mm(W)，30mm(H)
Weight
260g
Shell material
ABS
Cautions to the user
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This Device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)
This Device may not cause harmful interference
(2)
This Device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guaranty that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio / TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : 973050
Create Date                     : 2018:01:05 17:30:39+08:00
Modify Date                     : 2018:09:25 10:24:17+08:00
Subject                         : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : GPL Ghostscript 8.70
Keywords                        : 
Creator Tool                    : PDFCreator Version 0.9.9
Metadata Date                   : 2018:09:25 10:24:17+08:00
Document ID                     : a93ff856-f456-11e7-0000-0598e251583b
Instance ID                     : uuid:762c87a9-a588-4a85-8d03-c1ebe9228448
Format                          : application/pdf
Title                           : 20171201_OPC001C_2C
Creator                         : 973050
Description                     : 
Description (x-repair)          : 
Page Count                      : 5

EXIF Metadata provided by EXIF.tools