SECOM TWSECOMOPC0050 Access Reader User Manual 20171201 OPC0050

Download:
Mirror Download [FCC.gov]
Document ID	4019721
Application ID	Dh1vWf6Yp6JVG3MNkfZ1sw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.39kB (279867 bits)
Date Submitted	2018-09-26 00:00:00
Date Available	2018-09-27 00:00:00
Creation Date	2018-01-05 17:31:37
Producing Software	GPL Ghostscript 8.70
Document Lastmod	2018-09-25 10:19:34
Document Title	20171201_OPC0050
Document Creator	PDFCreator Version 0.9.9
Document Author:	973050

OPC0050 User Manual
Overview
This product is suitable for RFID reader, for Access Control Management System. The card
reader does not store any card information. When card is sensed, data is sent to the access
controller via the RS485 interface
Function Description：
：
1) Conforms to ISO 14443A and supports MIFARE card.
2) Provides RS-485 communication interface for long distance installation.
3) LED indicator:
Normal - blue light
Card recognition is correct - green light
Card identification is invalid - red light
RS485 communication failed - blue and red light flashing alternately
4) Voice prompts:
Card recognition is correct - Beep once
Card identification is invalid / RS485 communication failed - Beeps continuously
5) There is a touch button for doorbell, press to trigger the doorbell relay action; press the
button for more than three seconds will trigger an emergency relay action.
6) 2- Relay: Used in doorbell notification and emergency notification.
7) Device Addressing Settings: Use a DIP 4-Switch method to address card readers. The
upper limit of card reader is 16.
LED indicator
DIP SW1~4 Device address setting :( 1: ON, 0: OFF)
Address 1 2 3 4 5 6
DIP 1
1 0 1 0 1 0
DIP 2
0 1 1 0 0 1
DIP 3
0 0 0 1 1 1
DIP 4
0 0 0 0 0 0 0
Name
10
11
12 13 14 15 16
0 1 0 1 0
0 0 1 1 0
1 1 1 1 0
1 1 1 1 0
8-Pin Terminal Wire
Wire color
Function Description
L+
Blue
RS485
RS485 L+
L-
White
RS485
RS485 LL-
+12
Red
INPUT 12V
Black
RS485 GND
C1
Yellow
RELAY1 COM
NO1
Yellow
RELAY1 NO
C2
Green
RELAY2 COM
NO2
Green
RELAY2 NO
Product Appearance：
：
Front View
Back View
OPC-0050 Specification
Model No.
OPC0050
Read Format
ISO/IEC14443A/MIFARE
Read Range
3-5cm (max )
Input Ports
1 Sensitive Touch Keypad
Output Port
Relay x 2
LED Indicator
Power / Comm.
Beep Tone
Buzzer
Power Input
DC 12V(10V~15V) / 1A
Current Consumption
Max 100mA.
Comm. Interface
RS-485
Comm. Baudrate
RS-485：9,600
Operating Temp.
0° C ~ 55° C / 32° F ~ 131° F
Relative Humidity
20% ~ 90%
Dimension
115mm(L) x 70mm(W) x 28mm(H)
Weight
100g
Shell material
ABS
(contact rating relay 30Vdc/1A)
Cautions to the user
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This Device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)
This Device may not cause harmful interference
(2)
This Device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guaranty that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio / TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : 973050
Create Date                     : 2018:01:05 17:31:37+08:00
Modify Date                     : 2018:09:25 10:19:34+08:00
Subject                         : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : GPL Ghostscript 8.70
Keywords                        : 
Creator Tool                    : PDFCreator Version 0.9.9
Metadata Date                   : 2018:09:25 10:19:34+08:00
Document ID                     : c379d657-f456-11e7-0000-aac202975f25
Instance ID                     : uuid:fb840d7a-c448-41b7-8680-36c84c333c42
Format                          : application/pdf
Title                           : 20171201_OPC0050
Creator                         : 973050
Description                     : 
Description (x-repair)          : 
Page Count                      : 4

EXIF Metadata provided by EXIF.tools