SEDO DF-5000 Digital Video Recorder Card User Manual

SEDO Co., Ltd. Digital Video Recorder Card

User Manual

Download: SEDO DF-5000 Digital Video Recorder Card User Manual
Mirror Download [FCC.gov]SEDO DF-5000 Digital Video Recorder Card User Manual
Document ID376175
Application IDYDXM+1+56pOo6//YyCeXMA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize187.62kB (2345280 bits)
Date Submitted2003-11-25 00:00:00
Date Available2003-11-25 00:00:00
Creation Date2003-09-24 18:33:40
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2003-11-07 11:06:24
Document TitlePowerPoint ÇÁ·¹Á¨Å×À̼Ç
Document CreatorAcrobat PDFMaker 5.0 for PowerPoint
Document Author: digi

DVR SYSTEM
User’s Manual
Manual Revision
: Version 3.0
Release Date
Aug. 30, 2003
■ SERVER
■ CLIENT
INFORMATION TO THE USER (Part 15.105(b))
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
WARNING (Part 15.21)
The manufacturer is not responsible for any Radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.”
INDEX
DVR User’s Manual
1. DVR Sever
1-1. Display Mode
Main screen
Pan/Tilt Control
1-2. Setup Mode
Standard Setup
Recoding Setup
Schedule setup
Motion Detection Setup
Color Setup
PAN/TILT Setup
Network Setup
Backup Setup
1-3. Search Mode
Search screen
Data Back up
Search Data & Time
Print
2. Client program
1. DVR SERVER
1-1. Display mode
DISPLAY Mode
A . Camera Number/recording state
: Camera No. /
: Recording /
: Motion /
: Sensor )
B . Display present images
C. Select screen division among 1/4/6/7/8/9/10/13/16Ch.
D. Auto switching (Rotation) : Displays switching images by 1Ch./4Ch./8Ch. in sequence
with selected time interval.
E. Select camera No.
F . Go to ‘SETUP’ Mode.
G . Go to ‘SEARCH’ Mode.
H. Power
When you click the Power button, DVR system will be shut down.
When you want to go Window mode, Please go to Setup.
(But, Do not use this function except only unavoidable situation for the system.)
I . TIME : Display current time.
감시 모드
Display information of System
For example, VGA card, OS, network
communication state etc.
Capacity of HDD
Calculate used HDD space of current setting.
Used HDD space is very changeable by setup of channel, recording
method, compressor, image size etc.
So, you can calculate used HDD space by this function.
Also, If you specified HDD space, you can calculate used HDD space.
UPDATE information – Information of adding function & bug fix, etc.
5
Printed calculated frame result by
each CODEC.
No data record
during compression test.
When you click the Power button, DVR system will be shut down.
When you want to go Window mode, Please go to Setup.
K
Display present recording images.
•This function is only our product’
product’s special feature.
You can know present compressed recording image
by CODEC.
Real time chatting between SERVER
and CLIENT.
If you connect with several user, you
can choose just one user and then
send message to one user.
Record history of DVR SERVER.
You can know working history and
Connect history from outside
PAN/TILT Control
Click !
Speed dome control
CONTROL moving speed and ZOOM/FOCUS
Operation speed of PANTILT camera.
But, camera has to include this function.
N. PAN/TILT control :
Click
to active Pan/Tilt control panel.
Change direction with direction keys
ZOOM : Zoom In / Out.
Focus : Control Focus.
Speed dome control ( Refer the next page)
Some camera has no P/T, Z/F & preset function.
Please use, after check CAMERA MAKER about this function supporting.
DISPLAY Mode
Speed dome control
: Setup Preset of Speed Dome Camera.
1.
How to set Preset
How to set Preset
1.
2.
3.
4.
5.
6.
7.
Select Preset No.
Insert Preset ID.
Click
to save ID.
Select a desired place for preset by pan/tilt control panel.
Click 4 to add the preset.
Click to perform preset.
Click 7 to delete preset.
DISPLAY Mode
2.
Close this Box
Run a Group
Stop a Group
Delete a Group
Rename a Group
Delete a Preset
Insert a Preset between lists
Add a Preset
How to set a Group
1.
2.
3.
4.
5.
6.
7.
8.
Select Group No. 1
Insert Group Name 2
Click 3 to add Group List on 4 .
Select Preset No. 5
You can test preset by Click
Select Moving time to next position. 6
Enter Dwell time for the position. 7
Repeat No.1~6 to add group.
Select a desired group on 4
and click
to run a Group.
9. Click
to stop a Group.
10
M
In case that more than one PTZ camera set up, when user clicks or operates keys of PANTILT,
some camera which are operated will be displayed on screen.
If click this part, window for PANTILT setting will be open.
This function is convenient for users to operate several PANTILT in one DVR system.
11
1. DVR SERVER
1-2. Setup mode
12
STANDARD SETUP
go to “SETUP” mode
1. STANDARD setup : after system installation, setup as user’s requires.
12
10
11
13
1. Camera name :
Check it to display camera name on screen.
2. Voice :
Check it for recording the voice
MIC -1CH : Check it for voice recording of channel no.1.
1) Connect to MIC IN.
2) Use after check box of Voice.
LINE : When use both communication between SERVER and CLIENT/
1) Connect to sound CARDLINE IN of SERVER SYSTEM
2) Use after check box of LINE
13
3. Camera auto switching : Select camera switching time (Default : 1sec)
4. Monitor out select :
You can choose image of analog monitor among display images
(Only for DF900,1000,1500 ,2400 )
5. Auto system reset: Setup a time interval for rebooting and shutdown the system.
What is the watch Dog ?
When system is unstable while monitoring, it automatically
reboot the system.
14
STANDARD SETUP
6. Set password :
Enter new passwords for Setup/Search/View/Power Down mode.
-Setup : Program “Setup”
-Search : Program “Search”
-Viewer : Start DVR
-Power Down : Close DVR
First setup
1.Select password among Setup, Search, Viewer, Power Down.
2.Insert password
3.Confirm password
4.Click “Set Password” and then, check message.
Delete
1. Insert current password
2. Do not insert “New Password” and “ Confirm Password”
3. Click “Set Password”
4, Select delete message of pop up window.
15
7. Password setup
Control USER right for DVR using.
If you permit right of secondary and third administrator that you have to
setup primary administrator password.
Select desired contents for each manager.
After check, setup password.
Admin : all functions available
Set 1st Manger and 2nd Manger up for your desired function.
16
8. Time setup :
Setup time of system.
9. Save disk :
Scandisk :
Check DISK in DOS MODE
Format : Format data
10. Companion : Select compression method
When decrease picture quality, the size of image decrease.
You can see more frames in Remote Access.
•
Resolution : Information of current picture quality
11. Setup Channel : If user wants to extend more than 4ch that user selects desired
channel
(Only for model DF-1000, 1500, 2000)
17
STANDARD SETUP
1-3. STANDARD Setup
11. Add Printer : Add printer as user’s require.
☞ Click ! Next
☞Select a manufacturer and model
of the printer.
☞ Select Printer Port and click Next.
☞Enter Printer name and click Next.
☞ After printing test, click Finish.
12. Power Mode : Select desired power mode when you shut off
DVR System by clicking Power button in Main mode.
Window : Go to Window Mode when you click Power button.
Power off : DVR system power off when you click Power button.
(Notice : DVR system is security product. So If user working in window mode,
you have a possibility get problem in your system. )
18
저장방식 설정
2. Recording Type
10
8 9
11
15
16
14
12
13
17
1. Camera Number
2. Connect : Hidden camera function.
‘None’ selected camera does not show images on the screen while recording
so that people can not notice it is recording.
3. Camera name : Click the left button of mouse where you want and enter the camera
name as you want.
4. Event : You can set different recording type (sensor , motion, schedule, record, no
record ) by Mouse click.
When block selected, it can be changed by Right Mouse click.
19
A
Rec/mot : Normally DVR recorded by setup frame.
But, when motion happens DVR will be record by setup Pre/Post frame.
This is complex function for recording & motion the selected channel.
So, this is very useful function for saving hardware.
Setup Rec/Mot for event.
Select recording frame while recording.
Select recording frame of Pre/Post during motion
REC/MOT : When motion events, recording frame will be increased
REC/SEN : When sensor works during recording, recording frame will be increased.
MOT/SEN : This is recording function for Motion/Sensor at the same time.
R/M/S
: This is recording function for Recording/Motion/Sensor at the same time.
If user wants to setup same setting for several camera as follows ;
1. Drag select area by mouse left button.
2. After click mouse right button, setup recording type
20
RECORDING TYPE
5. Frame : Adjust number of recording frames for each channel.
6. Pre : Pre- Alarm function. Setup record-starting time before event happens. (Second)
7. Post : Post- Alarm function. Setup the duration time of recording after event finishes.
(Second)
8. Sensor Type : Select the sensor type. Normal Open / Normal Close Type
• : Normal Close type sensor
O : Normal Open type sensor
9.Time : Set the running time of the alarm control outputs
10. Alarm control
• : D/O Alarm control off
O : Alarm control on
11. Auto Camera Search : If you click this button, not received image channel from camera
to log screen automatically. And then, it doesn’t record the data in HDD.
12.
When stop input video
signal, alarm will be
started.
When stop input
recording signal, alarm
will be started.
13 Display history of MOTION and EVENT in search
14
This function compensate weak
video signal from camera.
21
15
When event happens, selected channel will be
enlarged to full screen.
When event happens, selected camera makes preset function start.
16
Irregular camera searching : This function checks camera state.
17
Functions of No.14 Video signal loss & No.16 Irregular camera searching
are only for DF-900, 100, 1500, 2400.
22
SCHEDULE
3 . Schedule
☞ User has to setup “Schedule” in event of Recording Type.
1. Select camera number to record by schedule.
2. Choose Record / Motion / Sensor at the desired day and time box.
☞ Example : How to set a schedule
① Choose a desired camera number
② Drag mouse to decide time table to record.
③ Go back to SETUP/RECORDING TYPE to set Recording type as
“Schedule”
④ When you want Motion Detection recording by schedule,
Motion detection area and channels are must be set up correctly.
23
MOTION SETUP
4.
Motion :
☞ Select the area for motion detection with mouse.
1. Channel : Select the specific camera
2. Motion area : To select motion detection area, move the mouse pointer to the
desired area and select the range by dragging the mouse.
No.of Motion detection area is available to set without limit.
3. Sensitivity : Move the bar to adjust the sensitivity of Motion detection
4. Delete : Deselect motion area.
24
COLOR SETUP
5. Color Control
☞ Setup the color of pictures.
1. Channel : Select a desired camera No.
2. Color area : The selected camera image is displayed.
3. Bright : Adjust brightness of the image.
Saturation : Adjust saturation of the image.
Contrast : Adjust contrast of the image.
Hue : Adjust hue of the image.
* Move the bar to adjust the images.
4. Setup User’s Default : Setup your desired colors to Default Color
5. Cancel User’s Default : Setup User’s Default Color 4 to DVR Default Color.
6. All Default Color : Set All Camera to Default Color.
7. Default Color : Set a desired Camera to Default Color.
25
PAN / TILT
6. PAN/TILT
☞ Insert PAN/TILT protocol code for brand new PAN/TILT Receiver.
1. Select camera No.
2. Chose RX brand or Model name on
and click ‘Insert’ button
3. Select COM port.
New Protocol : When you cannot find camera name on
Insert New RX brand or Model name on
to active protocol code box, or
4.
Click “ Insert ” button
Just contact where you purchase a system, we will set it for
you.
26
1. Unit# & Communication condition
1) Special feature
- User can select different unit# each screen without concern for camera#
- User can select baudrate, databits, parity
- Therefore, DVR has a flexibility for PTZ camera setup and it will be
possible to connect multi pantilt
2) How to use :
- In SETUP screen
Click [Port setup] button -> Select baudrate, datebits, parity and unit#.
3) Notice:
- When user selected same PTZ camera & unit# in different camera#,
if user operates one of them, both of them works.
2. Select "NO PTZ CAMERA“
- Patilt function button will be not active.
27
3. Active button for each PTZ camera model
- Supported function button will be active for camera kinds
but others will be not active
4. Add function of Event preset
1) When event happens, each screen will be worked by selected
AUTOGROUP function.
-"Master Joystick Controller " : Joystick Controller connect to DVR
User can control PTZ by Joystick.
Good point :
1) Easy and comfortable control for PTZ.
2) Remote control
28
1. How to use
- Start "Master Joystick Controller use"
- When start function, you have to select controller and setup communication.
- If you don’t use this function, should be better close.
1) Function START :
- Click "Master Controller"
(1) Select controller product in "Setup Master Controller"
(2) Setup communication :
- Select COMM port
- Select Communication speed, databits, parity
(3) Click "OPEN Master Controller"
2) Function STOP :
- Click "Master Controller"
- Click "CLOSE Master Controller"
29
NETWORK
7. Control User Remote Access
☞ Select type of network
10
1. Select TCP/IP for Remote Access (TCP/IP, Modem etc.)
Select No connection when you don’t connect client site via network.
2. Check IP address
3. Transmission Speed and Image quality control.
30
4. Insert ID and Password : Client who try to connect from remote site will be checked
and confirm to access when certain IP and Password were already registered or
refuse to connect.
5. Add up to list
6. Delete from list
7.
: Display the current connected Client site
Current
connected client
You can disconnect the
Client site
Setup Client function through web server.
Existence memory web
client delete
Stop transmission to
WEB SERVER
31
9.
If you want to use Emergency Call, you have to make it active in
“control user access” of setup mode
After make it active, this function will be execute when server reboot.
7.
If program executed first time or after changing modem setup of system, will be
pop up a . And then, If you click OK button, will go to b automatically.
32
1
Telephony Line Device
-Modem information
-Normally, you can see one modem
name, but if computer has a several
voice modem, will be show all of them.
So, you can select one of them.
Click “Line Setting” button.
You can set modem for your desire.
Basically, Don’t need change default setup.
Click button, you can see detail information of modem.
33
4
Default Telephone Number to Call
: Insert telephone number of contact person on event
Preference : Insert total time for message by phone.
Ex) Setting time : 90sec.
On event, system send to message to contact
person for 90 seconds by phone
Sound Card : Select wave device
Record Format : Decide format for recording
Wave Audio Capability :
Check efficiency of wave device about voice modem
and sound card.
Sound card : efficiency of wave device
-Line
: efficiency of wave device about voice
modem
34
After finish setup will be pop up “Emergency call box”.
But when you finish setup, the box will be disappear automatically.
While executing Emergency Call program that system has a some problem,
program will be finish after showing message box.
If program not perceptive voice modem, will be showing message and
finish program.
35
10
Registration dynamic IP in DVR
Setup
-> click “control user access”
-> Display 10 box.
-> IP server setup
Click “Setting” button.
IP Server Address : 211.221.57.151
(IP server address was settled, user CAN’T CHANGE)
Insert name for IP server registration. Next click “OK”
But this is only pre-setup for registration of Dynamic IP.
36
After setting, Register to Dynamic IP server.
While your name transmit to Dynamic IP Server, If already your name is not exist,
you will see message for success
But If already exist your name or registration same name again that system will be
show “Already exist name”
We recommend execute this button only one time after setting.
But, If you want to register different DVR server name that you can execute after
select other name in setting.
This button make IP ON status in Dynamic IP Server.
You can know server status in Dynamic IP server.
*. When you register Dynamic IP sevrer first time, you have to execute
Setting and Send
Also, we make “Open” button for your reference, this function was not
required necessary. But if you use this function, it should be make a
better system.
37
BACK UP
8. Back Up :
8-1. BACKUP/FORMAT
Select
camera.
Select the
time period.
1. Select a desired folder to save data.
(Click Backup disk button and then Browser for folder will be displayed.)
Select camera for data back up.
Drag a desired time to back up with mouse in the time table.
Click again the selected time period to deselect the time.
2. Click Backup button to start data backup.
38
1. Select a desired folder to save data.
(Click Backup disk button and then Browse for folder will be displayed.)
Select the time period for backup with mouse.
Click again the selected time period to deselect the time.
2. Click Backup button to start data backup.
3. Click
, will be displayed folder for saved backup data
Click button
Saved DATA move to Nero Burning Rom. (EX: CAM00)
39
To make AVI file for saved DATA.
Send Email : Send AVI file via Email.
Play : Can play without special player. (ex: windows media player)
1. Insert Description
2. Select the desired time period for backup.
3. Click “From” to check first data time & image for AVI file
4. Click “To” to check last data time & image of desired AVI file
5. Click “Go” to make AVI file
6. Click “Stop saving AVI file” to stop making AVI file.
40
백업 설정
8-2. BACKUP/SCHEDULE
Setup a schedule for Auto-backup.
1.
When you want auto back up, select camera and time to back up
2. By click, able to select recorded image data base, and recording reservation time.
3. Auto-backup Setup
Apply all channel :
Select all camera.
Save time : Setup time period of Data for Auto-backup.
Backup time : Setup time for backup.
41
백업 설정
8-3. BACKUP
1. Select Camera
2. Backed up data list (time table.) :
Check Back Up data – Able to check whether back up data correctly or not.
The image in box when press Play button is from back up media, not from HDD.
3. Play to confirm back up image
4. Slide bar to play.
5. Play :
Play
Stop
42
1. DVR SERVER
1-3. Search mode
43
SEARCH Mode
Go to “SEARCH” mode.
A. Search screen
B. Time table
Display recorded data with red line along time
: Select all cameras for searching
: Select desired camera No. for searching
: Add camera numbers to be selected at same time )
: Move the Blue line for desired time for searching.
44
검색 모드
C. ZOOM IN/OUT : Select one channel to Zoom In/Out .
( Use for one channel search)
Zoom Out
Default
Zoom In
D. Calendar
Display the date with recorded data with
Click desired date, hour & minute for searching
E. Search the recorded data with below buttons
Stop
Play
Playback
Replay the recorded voice
Play faster
Playback fast
Playback each frame
Play each frame
45
검색 모드
F.
: BACKUP
Back up the desired data to FDD
: for one frame image back up
: PRINT
Printing image
1. Select a desired image
2. Enter Title & Event.
: EXIT- Go to Display Mode
46
G
Panoram : You can search desired image from selected time
successively.
This function support only one channel.
Call to screen keyboard
User can backup data through AVI during search.
If click AVI button during search, above window will be active.
After insert required article, user can save data.
In case of WINDOWS XP, user can backup CD by WINDOWS’ itself recording
function.
H. EVENT :
Display history of MOTION & EVENT (refer to Page. 21)
47
2. CLIENT
1MULTI CLIENT
a multi client
b m to m
2 web client
48
MULTI CLIENT
CLIENT
After Installation of program as same way as server, Double-click
Icon.
Check VGA card :
If VGA card supports overlay, check it.
Otherwise, please don’t check it.
Because sometimes image is not clear.
49
MULTI CLIENT
a. Site Name : Insert name for a connected site
b. Choose network connection type.
Modem => Phone No.
TCP/IP => IP Address
c. Insert IP address for a connected DVR server
d. Enter ID & Password for the site.
e. Setup port
f. Connect : Connect to the selected site.
g. Cancel / OK : Cancel or OK for connection of server
If you want to multi sever connection, please repeat this way.
50
MULTI CLIENT
Insert IP SERVER
Insert SERVER NAME
(Refer to SERVER SET UP
IPSERVER )
Insert connectioned ID and PASSWORD
Click desired site from
connected list
Display current IP server
51
MULTI CLIENT
A . Camera Number / recording state.
: Camera No. /
B.
: Recording )
Display time of sever system
C. Select a screen division among 1/4/6/7/9/10/13/16Ch.
D.
Insert connected server IP address and Password
•
E.
Record displaying images of client site at client HDD.
Go to ‘ SETUP ’ Mode
Go to ‘ SEARCH ‘ Mode
1. Remote Search :
Search images from server PC.
2. Local Search :
Search images directly from Client PC.
F. PAN/TILT On/OFF
52
Local Search :
Client PC can record only present display images among images from
Server PC.
(For example, if you select one channel on display mode, only present
images is recorded on PC.
53
CLIENT
G.
Record history of DVR SERVER.
You can know working history and
Connect history from outside
Real time chatting with SERVER and CLIENT.
If you connect several user, you can choose just one user and then
send to message to one user.
54
On event, will be pop up screen. So, Increase
to intensive efficient of monitoring.
But, This function need to event setting for
connected server
Select camera on event.
Display event description
I. Power off : When you click the Power button, DVR system will be shut down.
H. TIME : Display current time.
55
SEARCH
Go to “SEARCH” mode.
A. Search screen
B. Time table
Display recorded data with red line along time
: Select all cameras for searching
: Select desired camera No. for searching
: Add camera numbers to be selected at same time.)
: Move the Blue line for desired time for searching
56
검색 모드
C. ZOOM IN/OUT : Select one channel to Zoom In/Out .
( Use for one channel search)
Zoom Out
Default
Zoom In
D. Calendar
Display the date with recorded data with
Click desired date, hour & minute for searching
E. Search the recorded data with below buttons
Stop
Playback
Playback each frame
Play
Play each frame
57
검색 모드
F.
: BACKUP
Back up a desired data to FDD to BMP
or JPG file.
Only for one frame image back up.
: PRINT
Printing image
1. Select a desired image
2. Enter Title & Event
3. Send a image via E-mail
: EXIT – Go to display mode.
58
G
Call to screen keyboard.
User can backup data through AVI during search.
If click AVI button during search, above window will be active.
After insert required article, user can save data.
In case of WINDOWS XP, user can backup CD by WINDOWS’ itself recording
function.
H. EVENT :
Display history of MOTION & EVENT (refer to Page. 21)
59
Web client
1.Connection
1. Insert IP address of DVR server
2 When connect web server, will be download
G.U.I (First time, it spends 2~3 minutes for the
downloading. But next time will be faster than
first time)
3. Download Nano ACTIVEX
4. When finish download activex, will be
connected automatically.
60
Web client
5. Insert ID and PASSWORD
6. Select OVERLAY function.
Before use this function, please check
whether VGA card supports this
function or not.
When you connect to WEB CLIENT first time, it would be
spent total 5~10 minutes for the downloading. Also,
sometimes could be interrupted to download by firewall or
router.
61
Web client main
Display transmitted screen from
Server
Go to setup mode
Search for saved data in SERVER.
62
Web client
Display switching image
You can check transmitted image each 4ch.
Change to full screen
Pan/tilt controller
Control focus
Control zoom in/out of
Pantilt camera
Control pan/tilt camera of
Server
If you click button, pantilt
camera function will be
active
63
Web client search
Display saved image
of connected server
: Data back up : Save data per unit screen.
Save current image on screen.
: PRINT
Printing saved image
1. Select a desired image
2. Enter Title & Event.
: EXIT
Play
Playback each frame
Go to main screen.
Stop
Play each frame
64
Web client
Control search speed
TIME : Display current time
Calendar - Display the date with recorded data
(Yellow color )
Click desired date, hour & minute for searching
A. Display saved image
B. Time table
Display recorded data with red line along time
: Select desired camera No. for searching
( In web client, you can search only each one channel)
: Move the Red line for desired time for searching.
65

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:11:07 11:06:24+09:00
Create Date                     : 2003:09:24 18:33:40+09:00
Page Count                      : 66
Creation Date                   : 2003:09:24 18:33:40+09:00
Mod Date                        : 2003:11:07 11:06:24+09:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : digi
Metadata Date                   : 2003:11:07 11:06:24+09:00
Creator                         : digi
Title                           : PowerPoint ÇÁ·¹Á¨Å×À̼Ç
Page Mode                       : UseNone
Page Layout                     : SinglePage
Tagged PDF                      : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QDZDF-5000

Navigation menu