SEECODE SFK404 VISOR (Bluetooth Handsfree Carkit) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	527685
Application ID	6Ky2vHQh4nwrLhzYSiK1JQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	191.91kB (2398901 bits)
Date Submitted	2005-03-30 00:00:00
Date Available	2005-03-30 00:00:00
Creation Date	2004-08-16 13:57:46
Producing Software	Acrobat Distiller 4.05 for Macintosh
Document Lastmod	2005-02-25 17:05:36
Document Title	Users Manual

Bluetooth Speaker Phone
Bluetooth Speaker Phone
User s Manual
●Be sure to read this user manual before using the VISOR.
●Please keep this manual as it may be useful later.
Features
Contents
I Supports both handsfree & headset
VISOR can be used as a handsfree unit or
headset as the situation demands.
I Crystal clear tone quality
I LCD display
You can view battery, volume and call status
at a glance.
Preparation
Features ······································1
Part description····························3
Button functions···························5
How to use
Configuration ·······························6
Handset compatibility ··················9
Pairing with a Bluetooth mobile
phone ········································10
Making a call
How to use
You can have conversations without noise and
feedback.
Preparation
Free & easy to use device
as a Speaker phone
in the office.
·Number dialing ·····························11
·Speed dialing ·····························11
·Last number/Voice dialing ···········12
·Speaker mute function ················12
·Microphone Volume Up/Down ·····12
Reference
Answering/Rejecting a call/
Transferring audio·························13
Upgrading the firmware ·············14
Reference
Troubleshooting·························15
Precautions································16
Specifications ····························17
Part description
Front
Internal Mic.
Back
Preparation
Number button(for dialing)
END & Power button
SEND button
Battery cover
# button(for pairing mode)
DC jack outlet
Earphone outlet
LCD display
Volume control &
Audio transfer
Blue LED
Speaker
How to use
�Button
(for mute)
Sunvisor clip fixing groove
Included Accessories
LCD Indicators
Call status
Battery status
Bluetooth connection
status
Mute
Volume status
DC power jack
Sunvisor clip
Upgrading cable
Battery
(rechargeable Li-ion)
Earphone
Reference
Visor
User guide/
Warranty card
Cigar lighter jack
Button functions
Configuration
For the best results, fully charge the battery prior to initial use.
How to use button
Supporting profile
Handsfree
Headset
Hold
Last number called
Press
Voice dialing(provided
the phone supports this)
Hold
Number dialing
Dial the number then
Speed dialing
Hold the Speed dial number
(press the last digit longer).
Answering a call
ringing
Press
Rejecting a call
ringing
Press
Ending a call
talking
Press
Transferring audio
(handset->Visor)
Transferring audio
(Visor->handset)
talking
Hold
Volume control
Slide the
Power on
Power off
Dialing '+'
Hold
talking
Deleting the pressed
number
Y( Hold
up or down.
Consult with your
phone manual.
of Visor
Hold
Hold
- 1 digit deleted
- all digits deleted
Press
Hold
and you can get back to the waiting call by pressing SEND(
),
) again.
Insert the battery with the
sticker facing up.
Fit the cover to get the
protruded part into the
groove part tightly.
Connect the DC power
jack to VISOR.
●Make sure the contacts are
connected properly.
Connect the DC power
jack to a power outlet.
When you receive your VISOR
the battery will not be completely
charged. Before using the VISOR
for the first time you should fully
charge the battery with the
supplied charger.
�It takes about 3 hours to get fully charge the battery.
Checking the battery status
Full
�While talking you can answer an another call by pressing SEND(
First,
Press
Open the cover to
the direction marked,
and insert the battery.
Charging the battery
Hold the number '0'
Y( Hold
Inserting the battery
Reference
Pairing mode
How to use
Visor Status
Preparation
Function
Discharged
a little
Low
Charging
required
Configuration
Mounting on the sunvisor
Place it on the sunvisor in a car.
Press and hold END & Power button
for more than 3 seconds.
Preparation
Fix the sunvisor clip into the
back fixing groove.
Power on
●Power turns on.
Power off
●Position the microphone towards the
driver.
Slide the mic down to get
clearer sound.
●Power turns off.
How to use
Using Mic.
Press and hold END & Power button
for more than 3 seconds.
Volume control
Slide the volume controller
up or down.
●For higher volume slide the button up.
●For lower volume slide the button down.
You can make conversations with
them.
Reference
Using earphones
�Earphone : Optional(Nokia earphone compatible-2.5mm (4p))
�Car charger : Optional(charger for Nokia compatible)
�Battery : Nokia 8210 series compatible
Handset compatibility
Pairing with a Bluetooth mobile phone
Functionality varies according to handset. First, check to see if the handset supports
handsfree profile or headset profile.
After pairing the Bluetooth mobile phone with VISOR you can use it as a handsfree unit.
Handset supporting headset profile
Model
R520m / R520mc
Ericsson
T39 / T39m / T39mc
T68m / T68mc
Sony Ericsson
Motorola
Maker
Model
T68i / T68ie
T610
Sony Ericsson
P800
T613
Z600
A803
6310 / 6310i
T280i
8910 / 8910i
TimePort 260C V1.1
3650
Samsung
X7700
Sky
IM6200
If your handset is not on this list
please consult your user manual.
Nokia
S55
S56
SX1
Panasonic
Motorola
Press # button for more than 2 seconds.
From the handset, search for and register the Visor.
●The blue LED will flash once a second and
a melody.
6230
6600
n-Gage
Siemens
X70
�Once your phone is paired with
VISOR, it will be recognized
automatically next time.
How to use
Fisio 825/826
Turn on by pressing
the END & Power
button.
T630
T68
Philips
First,
Preparation
Maker
Handset supporting handsfree profile
●Please consult with the user manual of the handset.
●During the procedure, a pincode(or passcode) will be asked for.
Enter '0000'.
●When the pairing is completed, the blue LED of the VISOR flashes
every 4~5 seconds with a melody. If it flashes once a second, please
try from the beginning again.
V525
Reference
V600
IPairing can be done with up to 3 handsets maximum I
•VISOR stores up to 3 different phones in memory.
•Adding a 4th phone will remove the handset least recently used from memory.
•Priority is given to the handset most recently paired.
•When you want to change the handset priority, try to connect from the handset.
•If the latest paired handset supports handsfree profile, when you turn on VISOR, it connects automatically.
10
Making a call
Last number/Voice dialing
You can make conversation with a speaker phone
and use it as a handsfree unit.
Dial the number buttons to make a call to specific
number.
Press SEND.
●The call will be made.
Preparation
Number dialing
You can make number dialing only provided that your mobile
phone supports handsfree profile.
Press SEND button.
●By pressing this button the last number dialed will be called.
(In the case of SonyEricsson handset, voice dialing
initiates.)
●By holding this button voice dialing will be activated.
(If the handset supports this function.)
Ending a call
●Press END & Power button.
1. If required to press '+' button, press and hold '0' .
2. If you want to correct the number while number dialing :
press END & Power( ) - 1 digit deleted only.
press and hold END & Power( ) - all digits deleted.
●When Mute is on you will see the Mute icon
display on LCD.
●By pressing � button for more than 2 seconds, mute
function will be cancelled.
Microphone Volume Up/Down
There are 5(0~4) volume levels.
Level '0' is Mic mute, Level '1' is the default volume.
Ending a call
●Press END & Power button.
Reference
Speed dialing
●You can reach the saved number in the mobile phone.
11
Press � button for more than 2 seconds,
(sound will still be heard through earphones.)
You can make a call using the speed dial settings saved in
your mobile phone.
Press the last digit number for more than 1 second.
How to use
Speaker mute function
Press the volume control button
twice short.
Then, you can hear the 'beep' and LCD
tells as ' EnterMicGain'.
Press the level number (0~4).
12
Answering/Rejecting a call/
Transferring audio
Upgrading the firmware
Additional features may be added through new firmware revisions.
Answering a call
Preparation
When ringing VISOR will play a melody and the blue LED will
flash.
When ringing press SEND button.
●You can make conversation through
the speaker phone.
Rejecting a call
When ringing press END & Power button.
Connect the Visor and PC by using
the upgrading cable. Make sure that the charger
should be connected to the Visor first.
You can get downloaded the latest
firmware from the website.
How to use
Transferring audio
� Visor : Press Volume control button
Handset�
of the Visor for more than 1 second during
talking.
●It can be transferred to the Visor without ending a call.
Reference
� Handset : Press Volume control button
Visor�
of the Visor for more than 1 second during
talking.
●It can be transferred to the handset without
ending a call.
�When the phone supports handsfree profile Caller ID indication basic
functionality is available, but some handsets may not support this
function depending on the spec. of the handset (ex. Nokia 3650).
13
14
Troubleshooting
Precautions
▶ Charge the battery.
Check if the battery inserted
properly.
▶ Remove the battery and
Check if the dust exists
in the outlet of charging jack.
▶ Remove the dust and connect
Check if END & Power button
was not pressed long enough.
▶ Press END & Power button
Check if the handset
supports handsfree
profile.
▶ In order to make conversation with
Check if the battery of the
VISOR is low.
▶ Charge the battery.
Can not pair VISOR
with the Bluetooth
device.
Check if the power
of the Visor turned off.
▶ Press END & Power button for more than
Check if the Bluetooth device
to be paired turned off.
▶ Turn on the power.
No sound from
the speaker.
Check if the volume status
is at lower level.
▶ Slide the volume controller up
Does not turn on.
Do not modify, repair & take
apart at discretion.
Do not expose directly to
the water, alcohol, benzene,
etc. for cleaning.
Do not expose directly
to flammables.
Do not disassemble the battery.
Do not place or keep the unit
near the flammables.
insert it again.
it again.
for more than 3 seconds to turn on.
∙It may cause the explosion.
∙It may cause an explosion.
Visor, you need a Bluetooth handset
supporting handsfree profile.
Keep unit away from
humidity & dust.
Do not place the heavy
objects on the unit.
Keep away from direct light
or heat.
How to use
Can not make
conversation
through the Visor.
Do not drop the unit from
high places.
Preparation
Check if the battery of the
VISOR is fully discharged.
3 seconds and turn on the unit.
Reference
to turn up the sound.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Risk of explotion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
15
16
Specifications
Description
Ear Phone Interface
Ear Phone Type(Nokia)
Battery
3.6V, 950mA Li-Ion
Speaker
8Ω/1.5W(Normal)
MIC
-47 +/- 1.5dB
Power Consumption
Max 250mA
Cigar Lighter Jack
OUT : 5.0V/800mA
5.0V/1A
2400MHz to 2483.5MHz(USA, Europe)
Modulation Method
GFSK, 1Mbps, 0.5BT Gaussian
Transmission Power
Typ. 1.0 dBm
Hopping
1600hops/sec, 1MHz channel space
Rx. Sensitivity
Typ. -83.0dBm
Built in Memory
Flash memory(4MBit)
Operating Temperature
-20 ~ 70
Storage Temperature
-40 ~ 85
<52dB
Echo Cancellation
up to 18dB
Supported Profile
Headset and Handsfree
Security Level
Level 3
Standby Time
150 hours
Talking Time
5 hours
Products name :
Model number :
Purchased date:
Warranty period : 1year
Outlet the unit was purchased :
Reference
Noise suppression
1. This product was produced under strict quality management and inspection.
2. All defective units within the applicable Warranty period/s will be repaired or
replaced, in the case those faulty goods were handled normally.
3. To get Warranty service, return the unit to the outlet from which the unit was
purchased.
4. Fill in this Warranty card and keep it.
5. Free of charge Warranty shall not apply to :
-Defects or damage resulting from use of the unit in other than its normal
and intended manner, eg, in excess of their maximum specifications or
operating instructions.
-Defects or damage from misuse, accident, neglect, improper testing,
installation, alteration or modification of any kind, or spillage of food or
liquid.
How to use
AC/DC Adaptor
Carrier Frequency
Limited Warranty
Preparation
17
Function
Tel :
Customer
Address:
Name :
Tel :
18

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:56c66074-bd81-423a-a3b7-8d9bb8577c67
Producer                        : Acrobat Distiller 4.05 for Macintosh
Create Date                     : 2004:08:16 13:57:46Z
Modify Date                     : 2005:02:25 17:05:36+09:00
Metadata Date                   : 2005:02:25 17:05:36+09:00
Document ID                     : uuid:9bbddc0a-ffaa-4416-a588-b42cf11ddf3c
Format                          : application/pdf

EXIF Metadata provided by EXIF.tools