SEIKAKU TECHNICAL GROUP DMT-300LV Wireless Microphone Transmitter User Manual

SEIKAKU TECHNICAL GROUP LIMITED Wireless Microphone Transmitter

User Manual

WIRELESS MICROPHONE SYSTEM DMT-300LVINSTRUCTIONMANUALNF01912-1.0SEIKAKU TECHNICAL GROUP LIMITEDUNIT 1107 BLK.A2,YAU TONG INDUSTRIAL CITY .NO.17,KO FAI ROAD,KOWLOON,HONG KONG.http://www.dmtmic.com Tel: 886-4-22313737 email: alto@altoproaudio.com Fax: 886-4-22346757All rights reserved to DMT. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden. Copyright 2004 SEKAKU ELECTRON INDUSTRY (H.K.) CO., LTD.cRRRR
22NO.123547698Frequency ResponseCurrentCarrier Frequency RangeRF RadiationTotal Harmonic DistortionOscillation ModeModulation ModeFrequency StabilitySpurious EmissionELECTRIC PARAMETER75mA50Hz-15KHz 3dBm VHF Band 174~216MHzFM(F3E)10mW45dBm0.005%/25Quartz controlled fixed frequency1.0%SPECIFICATIONINSTRUTION:3. 1. After operation the microphone must be switched off as well. Otherwise the batteries will soon be exhausted. In order to avoid untune consumption of the inner battery: if pilot lamp of the wireless microphone (1)remains lighted, it means that the battery has no more power: (2)the lamp must flash only for the time of the switching -on; this indicates that the microphone works well. 2. INSTALL BATTERY: PLS. make sure the positive/negative before you replacement batteries.We congratulate you for the choice of this excellent professional apparatus microphone which will give you outstanding results at the high fidelity. The microphone suit for school speech, meeting speech, teachers and performer on the stage.When switches the power switch to "on" position, then the power indicator lights, indicate the apparatus is on. When switches the power switch to "off " position, then the power indicator lights, indicate the apparatus is off. FEATURES:"STAND-BY" funciton.Steel net based to prevent from rolling.SPECIFICATIONTRANSMITTER PERFORMANCE SPECIFICATION: 10111213Power SupplyOperating TemperatureDimensionsWeightDC 3V10 ~50108 (L) mm 66 (W) mm80 grams (7.3oz.)1. SOCKET2. LED INDICATOR3. POWER SWITCH4. VOLUME CONTROL5. BELT CLIP6. BATTERY COVER7. LABEL4327567. LABEL4. VOLUME CONTROL Large Small2. LED INDICATOR BATTER LOW CHANGING BATTER WHEN LIGHT-ON5. BELT CLIP 2 WAYS FOR HANGING VERTICAL CROSSWISE6. BATTERY COVEROTHER FEATURES:1. SOCKET 3.5 JACK 3. POWER SWITCH ON STAND BY OFFFEATURE:1DIAGRAM:LS-66LM-10 HM-281. BATTERY USE DC3V.2. AVOID OF THROWING DOWN.3. PROTECT THE UNITS AGAINST HUMIDITY AND HEAT.4. IF THE UNITS ARE TO BE PUT OUT OF OPERATION DEFINITIVELY, BRING THEM TO TECHNICAL ENGINEER FOR DISPOSAL.CAUTION:11RR6. LABEL6. LABEL1. SOCKET 3.5 JACK 1. SOCKET 3.5 JACK 2. VOLUME CONTROL Large Small2. VOLUME CONTROL Large Small3. POWER SWITCH ON STAND BY OFF3. POWER SWITCH ON STAND BY OFF4. LED INDICATOR BATTER LOW CHANGING BATTER WHEN LIGHT-ON4. LED INDICATOR BATTER LOW CHANGING BATTER WHEN LIGHT-ON7. BELT CLIP 2 WAYS FOR HANGING VERTICAL CROSSWISE7. BELT CLIP 2 WAYS FOR HANGING VERTICAL CROSSWISE5. BATTERY COVER5. BATTERY COVER

Navigation menu