SEIKAKU TECHNICAL GROUP WT-226CT Wireless Microphone User Manual 2

SEIKAKU TECHNICAL GROUP LIMITED Wireless Microphone 2

Users Manual

1. VHF high band wireless microphone.2. Hand-geld dynamic microphone.3. Wide dynamic range.4. Over 12 hours of continuous operation with on LR6 (AA size 1.5) alkaline battery.5. Battery replacement indicator.6. Tone-key circuit to eliminate external interference.7. Compander circuit for extended dynamic range.1Microphone element Type of emissionCarrier frequency rangeFrequency stability Max. modulation Tone frequency Pre-emphasis Spurious emissions RF output powerFrequency response ( 3dB)Dynamic rangeBatteryCurrent drainBattery life (Alkali)DimensionsNet weight CondenserFM(F3E)160-245 MHz0.005% at 2540KHz Deviation32.768 KHz50 S40dBc<1 mW50 Hz~15KHz100 dB1 LR6(AA Size)(1.5 Volts)60 mAMore than 12 hours240 mm (9.45in)160g(0.356bbs)2
1. This microphone has a 3-level power switch design.2. ln using first turn on the receiver and then the transmitter.3. New battery the power light is in "OFF". The light is "ON" It indicates the battery needs to be replaced.4. Remember to turn the switch "OFF", When the microphone is not in use in order to save power. ln "STAND-BY" set the switch to the center.SMT is a design of high quality and precise technology. High quality dynamic cartridge is used toproduces HI-FI sound, which is soft, broad and deep, most suitable for KTV entertaining. POWER LE D LIGHT(WHEN LESS POWER THE LIGHT IS IN "ON")NOTE: Make sure the power switch is in the "OFF" position when changing or installing newbattery. Average life on an alkaline battery is 12 hours. Be sure to use good quality long life 1.5V alkalinebattery only.OFF"STAND-BY" function.SWITCH COVERGRILLE HOLDER NECK RING SWITCH TUBE TAIL TUBE34
5CAUTION: 1. BATTERY USE DC1.5V (1 LR).2. DO NOT DROP THE MICROPHONE BODY ON THE FLOOR. 3. PROTECT THE UNITS AGAINST HUMIDITY AND HEAT. 4. IF THE UNITS ARE TO BE PUT OUT OF OPERATION DEFINITIVELY, BRING THEM TO TECHNICAL ENGINEER FOR DISPOSAL. Caution:Any changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.

Navigation menu