SENA TECHNOLOGIES SP05 DUAL STREAM BLUETOOTH STEREO User Manual Users Guide
Sena Technologies,Inc. DUAL STREAM BLUETOOTH STEREO Users Guide
Users Manual
Dual Stream Bluetooth Stereo Transmitter SENA SM10 Version 0.2 | SM10 SENA www.senabluetooth.com Users Guide TABLE OF CONTENTS INTRODUCTION................................................................................................................................................................................. 3 | SM10 INTRODUCTION The SENA SM10 is a Bluetooth dual stream audio adapter. Key Specifications: Bluetooth v2.1 +EDR Bluetooth Class 2 Profile Support: Advanced Audio Distribution Profile (A2DP) Audio Video Remote Control Profile (AVRCP) The SM10 features: Bluetooth Adapter for motorcycle stereo systems Dual streaming to two Bluetooth headsets at the same time Auxiliary stereo input for GPS or radar/laser alarm | SM10 USING THE SM10 | SM10 Clearing the paring list (Factory Reset) 2. Power on the SM10, and press the Pairing button on the SM10 for 12 seconds until the Blue and Red LED is rapidly flashing. 3. Then within 10 seconds, press Pairing button to confirm reset. The SM10 will be restored to factory setting and returns to standby mode. 4. If you don’t press the Pairing button within 10 seconds, the reset attempt is canceled and the SM10 returns to standby mode. | SM10 LED INDICATOR LED DESCRIPTION Slow Blue Flashing Standby or connected Slow Red Flashing Standby or connected (second headset) Rapid Blue Flashing Pairing Rapid Red Flashing Pairing (second headset) Blue Double Flashing Streaming Red Double Flashing Streaming(second headset) Note 1. Play/Pause/Track back/Track forward will be support correctly only when iPhone is connected to the main port. Play/Pause can be supported on some Android smart phone. | SM10 CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Caution Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. CE Declaration of Conformity This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, SENA declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult http://www.senabluetooth.com. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : tae Create Date : 2012:05:08 17:55:56+09:00 Modify Date : 2012:05:09 18:31:28+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creator Tool : Word용 Acrobat PDFMaker 9.0 Metadata Date : 2012:05:09 18:31:28+09:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Creator : tae Title : Users Guide Document ID : uuid:e66532c8-2fb8-4232-87a5-1fa056ebc49d Instance ID : uuid:175c8ab9-55b3-4288-b605-9d91974125d3 Page Layout : OneColumn Page Count : 7EXIF Metadata provided by EXIF.tools