SENA TECHNOLOGIES SP30 RC3 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3172993
Application ID	yOhwkZHyl1FuxHX870DeXA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	106.33kB (1329097 bits)
Date Submitted	2016-10-24 00:00:00
Date Available	2017-04-22 00:00:00
Creation Date	2016-10-04 10:05:18
Producing Software	Adobe Acrobat Pro 9.3.2
Document Lastmod	2016-10-24 09:19:30
Document Title	User Manual
Document Creator	Adobe Acrobat Pro 9.3.2

RC3
Quick Start Guide
Installation
Battery Release Hole
Using the Clip
(+) Button
Center Button
Using the Adhesive Tape
There are three ways of installing the RC3.
(-) Button
Using the Hook and Loop Fasteners
Battery Slot
Hook Fastener
Getting Started
Loop Fastener
Note:
• When closing the battery slot, insert both ends of
the rubber first.
• To remove the battery, insert a paper clip through
the Battery Release Hole.
16.Aug
Button Operation
Tap
Battery Check
Factory Reset
Status LED
Tapping
Tap
Double Tapping
1”
Press for 1 sec
70 ~ 100%
Power On
0 ~ 30%
Power On/Off
...
30 ~ 70%
...
8”
(+)
Button
Tap
(+) Button
Center
Button
1”
(-) Button
Press
...
Bluetooth Pairing
Power On
Press
Headset Control
To control your headset using the RC3, please refer to the
Quick Reference Guide for button operations on functions
such as phone, music, and intercom.
Center
Button
Pairing
Deep Sleep
(+) Button
1”
Center
Button
Remote Control Pairing
Press
Headset
Note:
• You can control the headset using the RC3 only
after you pair them together.
• The RC3 supports Sena headsets with Bluetooth
4.1.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: support@sena.com
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received. Including interference that may cause
undesired operation
Note : This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
ÿLe present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisee aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est
susceptible d'en compromettre le fonctionnement. ÿ
Caution: Any changes or modifications in construction of this device which are not expressly approved
by the party responsible for compliance could void the user's authority to operate the equipment.
Hereby, SENA TECHNOLOGIES.Inc Declares that this RC3 is in compliance with the essential
requirements and other relevant provisions of directive 1999/5/EC.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:10:04 10:05:18+09:00
Creator                         : Adobe Acrobat Pro 9.3.2
Modify Date                     : 2016:10:24 09:19:30+09:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Metadata Date                   : 2016:10:24 09:19:30+09:00
Creator Tool                    : Adobe Acrobat Pro 9.3.2
Format                          : application/pdf
Document ID                     : uuid:abcc2160-d5de-4be6-891a-18ffc5d335cf
Instance ID                     : uuid:bcede2c0-e33d-43f4-b987-7b1ae3fbe55a
Producer                        : Adobe Acrobat Pro 9.3.2
Page Count                      : 3

EXIF Metadata provided by EXIF.tools