SENA TECHNOLOGIES SP35 SC1 User Manual

Sena Technologies,Inc. SC1

UserManual.wiki >

SENA TECHNOLOGIES >

SP35 User Manual

User Manual

English Schuberth SC1 www.schuberth.com User’s Guide

SC1 © 1998-2016 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. Prism™, Bluetooth Audio Pack for GoPro® , Tufftalk™, 20S™, 10S™, 10C™, 10U™, 10R™, 3S™, SMH10™, SMH10R™, SMH5™, SMH5-FM™, SMH3™, SPH10™, SPH10H™, SPH10H-FM™, SPH10S™, Expand™, Bluetooth Mic&Intercom™, Handlebar Remote™, Wristband Remote™, SM10™, SR10™, SR10i™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. GoPro® is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (“Sena”) is not affiliated with Woodman Labs. The Sena Bluetooth Pack for GoPro® is an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the GoPro® Hero3 and Hero4 allowing for Bluetooth capabilities. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their respective owners.

SC1 CONTENTS 1 INTRODUCTION........................................................................................................ 5 2 PACKAGE CONTENTS............................................................................................. 6 3 INSTALLING THE SC1 ON YOUR HELMET............................................................ 7 3.1 Installing the SC1..................................................................................................................... 8 3.2 Taking out the SC1................................................................................................................... 8 4 GETTING STARTED................................................................................................. 9 4.1 Button Operation...................................................................................................................... 9 4.2 Powering On and Off............................................................................................................... 9 4.3 Charging.................................................................................................................................. 9 4.4 Checking the Battery Level................................................................................................... 10 4.5 Volume Adjustment................................................................................................................ 10 4.6 Sena Softwares...................................................................................................................... 11 5 PAIRING THE SC1 WITH BLUETOOTH DEVICES.............................................. 11 5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device.......................................... 12 5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10............................ 12 5.3 Advanced Selective Pairing - A2DP Stereo or Handsfree.................................................... 13 6 MOBILE PHONE, GPS, SR10................................................................................ 14 6.1 Mobile Phone Call Making and Answering........................................................................... 14 6.2 Speed Dialing........................................................................................................................ 15 6.3 GPS Navigation...................................................................................................................... 16 6.4 Sena SR10, Two-Way Radio Adapter.................................................................................... 16 7 STEREO MUSIC..................................................................................................... 16 8 INTERCOM............................................................................................................. 17 8.1 Intercom Pairing..................................................................................................................... 18 8.2 Two-way Intercom.................................................................................................................. 19 8.3 Three-way Intercom............................................................................................................... 20 8.4 Four-way Intercom................................................................................................................. 21 8.5 Team Signal........................................................................................................................... 22 9 THREE-WAY CONFERENCE........................................................................................................PHONECALLWITHINTERCOM 22 PARTICIPANT 10 GROUP INTERCOM............................................................................................... 23 11 UNIVERSAL INTERCOM....................................................................................... 24 11.1 Universal Intercom Pairing.................................................................................................... 25 11.2 Two-way Universal Intercom.................................................................................................. 25 11.3 Three-way Universal Intercom............................................................................................... 26 11.4 Four-way Universal Intercom................................................................................................. 27 12 FM RADIO............................................................................................................... 29 12.1 FM Radio On and Off............................................................................................................. 29 12.2 Preset Stations....................................................................................................................... 29 12.3 Region Selection.................................................................................................................... 30 13 FUNCTION PRIORITY........................................................................................... 30 English 7.1 Bluetooth Stereo Music ............................................................. 16 7.2 Music Sharing ....................................................................... 17

SC1 14 CONFIGURATION SETTING................................................................................. 31 14.1 Intercom Pairing..................................................................................................................... 32 14.2 Mobile Phone Pairing............................................................................................................. 32 14.3 Second Mobile Phone Pairing............................................................................................... 33 14.4 Phone selective pairing......................................................................................................... 33 14.5 Media Selective Pairing......................................................................................................... 33 14.6 Assigning Speed Dial............................................................................................................ 33 14.7 Enabling/Disabling Audio Boost............................................................................................ 34 14.8 Enabling/Disabling Voice Activated Phone Answering........................................................ 34 14.9 Enabling/Disabling Voice Activated Intercom....................................................................... 35 14.10 Enabling/Disabling HD Intercom....................................................................................... 35 14.11 Enabling/Disabling Voice Prompts.................................................................................... 36 14.12 Enabling/Disabling RDS AF............................................................................................... 36 14.13 Enabling/Disabling Advanced Noise Control™ ............................................................... 36 14.14 Delete All Bluetooth Pairing Information............................................................................ 36 14.15 Remote Control Pairing...................................................................................................... 37 14.16 Universal Intercom Pairing................................................................................................. 37 14.17 Factory Reset..................................................................................................................... 37 14.18 Exit Voice Configuration Menu........................................................................................... 37 15 REMOTE CONTROL.............................................................................................. 39 16 FIRMWARE UPGRADE.......................................................................................... 39 17 TROUBLESHOOTING............................................................................................ 40 17.1 Intercom Failure..................................................................................................................... 40 17.2 Intercom Reconnection......................................................................................................... 40 17.3 Factory Reset......................................................................................................................... 40 18 QUICK OPERATION REFERENCE....................................................................... 41 CERTIFICATION AND SAFETY APPROVALS ...................................... 42 • FCC Compliance Statement ........................................................... 42 • FCC RF Exposure Statement .......................................................... 43 • FCC Caution ........................................................................... 43 • CE Declaration of Conformity .......................................................... 43 • Industry Canada Statement ............................................................ 43 • Bluetooth License ...................................................................... 44 • WEEE (Waste Electrical and Electronic Equipment) ................................... 44 SAFETY INFORMATION ................................................................ 44 • Product Storage and Management ..................................................... 44 • Product Use ............................................................................ 45 • Battery ................................................................................. 45 PRODUCT WARRANTY AND DISCLAIMER ........................................ 46 • Limited Warranty ....................................................................... 46 • Warranty Exclusions ................................................................... 48 • Warranty Service ....................................................................... 50

• Battery • Release Tool SC1 3 INSTALLING THE SC1 ON YOUR HELMET LED (+) Button (-) Button DC Power Charging & Firmware Upgrade Port English 7

SC1 3.1 Installing the SC1 1. Insert the main unit into the helmet and push it gently until you hear a click. Click 2. Insert the battery into the helmet and push it gently until it is all the way in. 8 3.2 Taking out the SC1 1. Insert the release tool into the main unit and push it gently until you hear a click. Click 2. Pull the release tool until the main unit comes off the helmet.

SC1 4 GETTING STARTED 4.1 Button Operation (+) Button (–) Button 4.2 Powering On and Off To power on the headset, press and hold the (+) Button and the (-) Button at the same time for 1 second while hearing ascending beeps and a voice prompt, “Hello”. To power off the headset, press and hold the (+) Button and the (-) Button at the same time for 3 seconds while hearing descending beeps and a voice prompt, “Goodbye”. 4.3 Charging You can charge the headset by connecting the supplied USB power & English data cable into a computer’s USB port or USB wall charger. You can use any standard micro USB cable to charge the unit. The LED turns red while charging and turns blue when fully charged. It takes about 2.5 hours to be completely charged. AC Adapter or Note: Please make sure to take off your SC1-installed helmet while charging. The headset automatically turns off during charging. 9

SC1 4.4 Checking the Battery Level 4.4.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70 ~ 100% 3 flashes = Medium, 30 ~ 70% 2 flashes = Low, 0 ~ 30% 4.4.2 Voice Prompt Indicator When you power on the headset, keep pressing the (+) Button and the (-) Button simultaneously for about 3 seconds until you hear three, high toned beeps. Then you will hear a voice prompt indicating the battery level. However, if you release the buttons as soon as the headset turns on, you will not hear a voice prompt for the battery level indication. 4.5 Volume Adjustment You can easily adjust the volume by tapping the (+) Button or the (-) Button. You will hear a beep when the volume reaches the maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you reboot the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume for your Bluetooth MP3 music. However, if you adjust the volume during stand-by mode, it will affect volume levels of every audio source. 10

SC1 4.6 Sena Softwares 4.6.1 Sena Device Manager The Sena Device Manager allows you to upgrade the firmware and configure the device settings directly from your PC. Using this software, you can assign speed dial presets, FM radio frequency presets and more. It is available for both Windows and Mac. For more information on downloading the Device Manager, please visit oemsena.com/oem-schuberth/. 4.6.2 Sena Smartphone App The Sena Smartphone App allows you to configure device settings and read the User’s Guide and the Quick Start Guide. Pair your phone with your SC1 headset (please refer to section 5.1, “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device”). Run the Sena Smartphone App and you can configure its settings directly from your smartphone. You can download the Sena Smartphone App for Android or iPhone from www.sena.com/headset-app. 5 PAIRING THE SC1 WITH BLUETOOTH English DEVICES Before using the SC1 Bluetooth headset with any other Bluetooth devices for the first time, you will need to pair them together. You can pair the SC1 with Bluetooth mobile phones, Bluetooth stereo devices such as MP3 players, or motorcycle specific Bluetooth GPS navigation, and with other Sena Bluetooth headsets. The pairing operation is required only once for each Bluetooth device. The headset remains paired with the devices and automatically reconnects to them when they are within range. You will hear a high toned single beep and a voice prompt whenever the headset reconnects to the paired device: “Phone connected” to a mobile phone, “Media connected” to a Bluetooth stereo device. 11

SC1 5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device 1. Press and hold the (+) Button or the (-) Button for 10 seconds until you hear the voice prompt, “Configuration menu”. 2. Tap the (+) Button until you hear a voice prompt, “Phone pairing”. 3. Search for Bluetooth devices on your mobile phone. Select the SC1 in the list of the devices detected on the mobile phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 5. The mobile phone confirms that pairing has completed and the SC1 is ready to use. You will hear a voice prompt, “Your headset is paired”. 6. If the pairing process is not completed within three minutes, the SC1 will return to stand-by mode. Note: 1. If a Bluetooth connection between the headset and a mobile phone is disconnected, press the (+) Button for 3 seconds until you hear a high tone single beep to recover the Bluetooth connection immediately. 2. If the Bluetooth connection between the headset and a media player is disconnected, press the (+) Button for 1 second to recover the Bluetooth connection and play. 12 5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10 Typical Bluetooth headsets can connect with only one Bluetooth device, but a second mobile phone pairing allows the headset to connect with another Bluetooth device such as a second mobile phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter. 1. To enter the voice configuration menu, press and hold the (+) Button or the (-) Button for 10 seconds until you hear the voice prompt, “Configuration menu”. 2. Tap the (+) Button until you hear a voice prompt, “Second mobile phone pairing”. 3. Search for Bluetooth devices on your mobile phone. Select the SC1 in the list of the devices detected on the mobile phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 5. The mobile phone confirms that the pairing has completed and the SC1 is ready to use. You will hear a voice prompt, “Your headset is paired”.

SC1 5.3.1 A2DP Stereo Music Only 1. To enter the voice configuration menu, press and hold the (+) Button or the (-) Button for 10 seconds until you hear the voice prompt, “Configuration menu”. 2. Tap the (+) Button until you hear the voice prompt, “Media selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the SC1 in the list of devices detected on your phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 5.3.2 HFP for Phone Call Only 1. To enter the voice configuration menu, press and hold the (+) Button or the (-) Button for 10 seconds until you hear the voice prompt, “Configuration menu”. 2. Tap the (+) Button until you hear the voice prompt, “Phone selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the SC1 in the list of devices detected on your phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 14 6 MOBILE PHONE, GPS, SR10 6.1 Mobile Phone Call Making and Answering 1. When you have an incoming call, tap the (+) Button to answer the call. 2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering (VOX Phone) is enabled, unless you are connected to intercom. 3. To end a call, press the (+) Button for 2 seconds until you hear a mid-tone single beep, or wait for the called person to end the call. 4. To reject a call, press the (+) Button for 2 seconds until you hear a beep while the phone is ringing. 5. There are several ways to make a phone call: –– Enter numbers on your mobile phone’s keypad and make a call. Then the call is automatically transferred to the headset. –– In stand-by mode, press the (+) Button for 3 seconds, to activate the voice dialing of your mobile phone. For this, the voice dialing function must be available on the mobile phone. Refer to your mobile phone manual for further instruction.

SC1 Note: 1. If you have two phones connected to your headset and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from the second phone. In this case, the call from the first phone is on waiting mode. If you end a call, then it will automatically guide you to the first phone call. 2. If you have a mobile phone and a GPS connected to your headset, you may not be able to listen to the GPS voice instruction during the phone call. 6.2 Speed Dialing You can quickly make a phone call by using the voice speed dial menu. 1. To enter into the voice speed dial menu, press and hold the (+) Button for 5 seconds and you will hear a mid-tone single beep and a voice prompt saying “Speed dial”. 2. Tap the (+) Button to navigate between the menus. You will hear voice prompts for each menu item. 3. Tap the (-) Button to select a voice menu among the followings: (1) Last number redial (4) Speed dial 3 (2) Speed dial 1 (5) Cancel (3) Speed dial 2 4. After selecting the last number redial menu, you will hear a voice prompt, “Last number redial”. Then, to redial the last phone call number, tap the (-) Button. 5. To call one of the speed dials, tap the (+) Button to navigate between the menus until you hear a voice prompt saying “Speed dial (#)”. Then, tap the (-) Button. 6. If you want to exit the speed dial immediately, tap the (+) Button until you hear a voice prompt saying “Cancel”, and tap the (-) Button. If you do not press any button within 15 seconds, the SC1 will exit the voice speed dial menu and go back to stand-by mode. Note: 1. Make sure that you connect the mobile phone and the headset to use the speed dial function. 2. You need to assign speed dial numbers before using the speed dial (please refer to section 14.6, “Assigning Speed Dial”). English 15

SC1 7.2 Music Sharing You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation (please refer to section 8.2, “Two- way Intercom”). When you terminate music sharing, you can go back to the intercom conversation. To start or terminate sharing music, press the (+) Button for 1 second during an intercom conversation until you hear a double beep. To track forward or track back, press and hold the (+) Button or the (-) Button for 2 seconds. Note: 1. Both you and your intercom friend can remotely control music playback such as track forward and track back. 2. Music sharing will be paused when you are using your mobile phone or listening to GPS instructions. 8 INTERCOM To enter the intercom pairing mode, call intercom friends, or start group intercom, you must enter the intercom menu by pressing the (-) Button for 1 second. If you perform any action within the intercom menu, you will automatically exit from the menu. Intercom Functions Button Operation Enter intercom menu Press the (-) Button for 1 second - Enter intercom pairing mode Tap the (+) Button - Call first intercom friend Tap the (-) Button - Call second intercom friend Double tap the (-) Button - Call third intercom friend Triple tap the (-) Button - Start Group Intercom Press the (-) Button for 1 second - Exit intercom menu Press the (+) Button for 3 seconds English 17

SC1 8.1 Intercom Pairing 8.1.1 Pairing with Other SC1 Headsets for Intercom Conversation The SC1 can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two SC1 headsets (A and B) that you would like to pair with each other. 2. Press and hold the (-) Button for 1 second to enter the intercom menu. 3. Tap the (+) once, and you will hear a mid-tone single beep and the voice prompt, “Intercom pairing”. 4. Simply tap the (+) Button of any one of the two headsets A or B and wait until the LEDs of both headsets turn to blue and intercom connection is automatically established. The two SC1 headsets A and B are paired with each other for intercom conversation. If the pairing process is not completed within one minute, the SC1 will return to stand-by mode. A B D C Pairing A & B 5. You can make other pairing between headsets A and C, and between headsets A and D by following the same procedure as above. 18

SC1 6. The intercom pairing queue is ‘Last-Come, First-Served ’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend. Note: For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 8.1.2 Pairing with Other Sena Headset Models for Intercom Conversation The SC1 can be paired with all other Sena headset models such as the 20S, SMH10 and the SMH5 for intercom conversation. Please follow the same procedure as above to pair with these headset models. Note: The SMH5 cannot participate in three-way or four-way conference intercom with the SC1. The SMH5 has a limited capability of having two-way intercom with other Sena headsets. 8.2 Two-way Intercom 8.2.1 Starting Two-way Intercom You can start an intercom conversation with one of any intercom friends by tapping the (-) Button within the intercom menu. Press and hold the (-) Button for 1 second to enter the intercom menu. Tap the (-) Button once to intercom with the first intercom friend, tap the (-) Button twice to intercom with the second intercom friend , and tap the (-) Button three times to intercom with the third intercom friend. 8.2.2 Ending Two-way Intercom You can end an intercom conversation by using tapping the (-) Button within the intercom menu. Press and hold the (-) Button for 1 second to enter the intercom menu. Tap the (-) Button once to end intercom with the first intercom friend, tap the (-) Button twice to end intercom with the second intercom friend, and tap the (-) Button three times to end intercom with the third intercom friend. English 19

SC1 8.3 Three-way Intercom 8.3.1 Starting Three-way Intercom You (A) can have a three -way conference intercom with two other SC1 friends (B & C) by establishing two intercom connections simultaneously. While a three-way conference intercom is in progress, mobile phone connection of all three participants is temporarily disconnected. However, as soon as the conference intercom terminates or one of the participants leaves the intercom, all mobile phones automatically reconnect to their headsets. If you have an incoming mobile phone call during the conference intercom, terminate the conference intercom to automatically reconnect and receive the phone call. 1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom. Pairing (A) Pairing First Friend Second Friend (B) (C) 20 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). (A) First Friend Second Friend (B) (C) 3. You (A) can call the second intercom friend (C) by double tapping the (-) Button within the intercom menu, or the second intercom friend (C) may join the intercom by making an intercom call to you (A). (A) First Friend Second Friend (B) (C)

SC1 4. Now you (A) and two SC1 intercom friends (B & C) are having a three-way conference intercom. (A) First Friend Second Friend (B) (C) 8.3.2 Ending Three-way Intercom You can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press and hold the (-) Button for 3 seconds until you hear a beep to terminate three-way conference intercom completely. It terminates both intercom connections with (B) and (C). 2. Tap or double tap the (-) Button within the intercom menu to disconnect intercom connection with one of the two intercom friends accordingly. For example by single tapping the (-) Button within the intercom menu, you can terminate the intercom connection with just the first intercom friend (B). However, you still have the intercom connection with your second intercom friend (C). 8.4 Four-way Intercom 8.4.1 Starting Four-way Intercom You can have four-way conference intercom with three other SC1 users by adding one more intercom participant to the three -way intercom. While you are having a three-way intercom as above in section 8.3, “Three-way Intercom”, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C). Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A). 8.4.2 Ending Four-way Intercom As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just disconnect a single intercom connection. 1. Press and hold the (-) Button for 3 seconds until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B) and (C). English 21

SC1 2. Tap or double tap the (-) Button within the intercom menu to disconnect the intercom connection with one of the two intercom friends accordingly. However, when you disconnect the second friend (C) by double tapping the (-) Button within the intercom menu, you will be disconnected with the third participant (D) as well. This is because the third participant (D) is connected with you via the second friend (C). Note: Multiple headsets are connected during multi-way intercom. With various signals interfering each other, the intercom distance of multi-way intercom is relatively shorter than that of two-way intercom. 8.5 Team Signal You can search for your team by sending a team signal. If there is a teammate within the signal range, you will hear a bell sound. Tap the (+) and the (-) Button to send a team signal. 9 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT 1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and stay on the intercom conversation. 1) To answer the phone call and stop the intercom conversation, tap the (+) Button. The VOX Phone feature does not work if you are connected to intercom. When you hang up the phone call, the intercom will automatically be recovered. 2) To reject the phone call and stay on the intercom conversation, press the (+) Button for 2 seconds until you hear a beep. Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an incoming mobile call. 22

SC1 2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high toned beeps, alerting you that there is an incoming intercom call. You will also hear a voice prompt, “Intercom requested”. In this case, the intercom call does not override the mobile call because intercom has lower priority than mobile call. You have to hang up the mobile phone call to make or receive an intercom call. 3. You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation. During a mobile phone conversation, tap the (-) Button within the intercom menu to invite one of the intercom friends to the mobile phone line. To disconnect the intercom or the phone call, you must wait for the other caller to hang up or end the intercom conversation. 10 GROUP INTERCOM Group Intercom allows you to instantly create a multi-way conference intercom with three other most recently paired headsets. 1. Go through intercom pairing with up to three headsets you want to have Group Intercom with. 2. Press and hold the (-) Button for 1 second within the intercom menu to begin Group Intercom. The LED will flash blue and red simultaneously and you will hear a voice prompt, “Group intercom”. 3. To terminate Group Intercom, press the (-) Button for 3 seconds during Group Intercom. You will hear a voice prompt, “Group intercom terminated”. Note: Group Intercom supports SC1, 10Upad, 10U, 10C, 10R, 10S, 20S, and Tufftalk only. Other headsets will be excluded from Group Intercom. English 23

SC1 11.1 Universal Intercom Pairing The SC1 can be paired with non- Sena Bluetooth headsets for Bluetooth intercom conversation. You can pair the SC1 with only one non-Sena Bluetooth headset so if you pair with a different non-Sena Bluetooth headset, the previous pairing will be removed. 1. Turn on the SC1 and a non-Sena Bluetooth headset that you want to pair with. 2. Press and hold the (+) Button or the (-) Button for 10 seconds to enter the configuration menu. Tap the (+) Button until you hear a voice prompt, “Universal intercom pairing”. Tap the (-) Button to enter into Universal Intercom Pairing mode and the blue LED will flash rapidly and you will hear multiple beeps. Please refer to section 14.16, “Universal Intercom Pairing” for more details. 3. Perform the operation required for handsfree pairing on the non-Sena Bluetooth headset (refer to the User’s Manual for the headsets you want to use). The SC1 will automatically pair with a non-Sena Bluetooth headset when each are in pairing mode. 11.2 Two-way Universal Intercom You can initiate the Universal Intercom connection with non-Sena Bluetooth headsets using the same intercom connection method as you would between other Sena headsets. Within the intercom menu, you may single tap the (-) Button to begin an intercom conversation with the first intercom friend, double tap with the second intercom friend, and triple tap with the third intercom friend. Non-Sena Bluetooth headsets may initiate the Universal Intercom connection, by activating the voice dialer or using the redialing operation. You may also disconnect the existing connection by using the operation to end a call (refer to the User’s Manual for the headsets for voice dialer, redialing, and ending a call). English 25

SC1 11.3 Three-way Universal Intercom You may make a three- way Universal Intercom connection with two SC1s and one non-Sena Bluetooth headset. If the intercom connection is made, all headsets connected cannot use the mobile phone call function since the connection between the headset and the phone is disconnected temporarily. If you disconnect the intercom call, the mobile phone connection is made again automatically so that you can use a mobile phone call function. 1. You (A) need to be paired with a non-Sena Bluetooth headset (B) and another SC1 headset (C) for the three-way conference intercom. Pairing (A) Pairing (B) (C) 2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an intercom call with you (A). (A) (B) (C) 3. The other SC1 (C) may join the intercom by making an intercom call to you (A). (A) (B) (C) 26

SC1 4. Now you (A), non-Sena Bluetooth headset (B), and the other SC1 (C) are having a three-way conference intercom. (A) (B) (C) 5. You may disconnect three-way Universal Intercom by pressing and holding the (-) Button for 3 seconds. 11.4 Four-way Universal Intercom You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three SC1s and one non-Sena Bluetooth headset or 2) two SC1s and two non-Sena Bluetooth headsets. You may have a couple of other Four-way Universal Intercom configurations, 1) your headset (A), a non-Sena Bluetooth headset (B), another SC1 (C), and a non-Sena Bluetooth headset (D), 2) your headset (A), a non-Sena Bluetooth headset (B), and two other SC1 headsets (C and D). You may make the four-way Universal Intercom call the same way as a normal four-way intercom call. English 27

SC1 11.4.1 Four-way Universal Intercom Case 1 Two SC1 headsets (A and C) and two non-Sena Bluetooth headsets (B and D). 1. You (A) may start an intercom conversation with the non-Sena Bluetooth headset (B). 3. The non-Sena Bluetooth headset (D) may join the conference intercom by making an intercom call to the SC1 (C). (A) (C) (A) (C) (B) (D) 2. The other SC1 (C) may join the intercom by making an intercom call to you (A). (A) (C) (B) (D) 28 (B) (D) 4. Now two SC1 headsets (A & C) and two non-Sena Bluetooth headsets (B & D) are connected with the four-way Universal Intercom. (A) (C) (B) (D) You may disconnect a four-way Universal Intercom using the same way as you do in a normal four-way intercom. Please refer to section 8.4.2, “Ending Four-way Intercom”.

SC1 11.4.2 Four-way Universal Intercom Case 2 Three SC1 headsets (A, C and D) and one non-Sena Bluetooth headset (B). The procedure is the same as case 1 described in section 11.4.1. (A) (C) (B) (D) 12 FM RADIO FM Radio is supported by SC1 ADVANCED only. 12.1 FM Radio On and Off To turn on the FM radio, press the (-) Button for 5 seconds until you hear a mid-toned double beep sound. You will then hear a voice prompt, “FM on”. To turn off the FM radio, press the (-) Button for 5 seconds until you hear a voice prompt, “FM off”. When you power it off, the SC1 will remember the last station frequency. When you power it on, the last station frequency will be playing. 12.2 Preset Stations You can listen to preset stations while listening to the FM radio. Press the (+) Button for 3 seconds to go upward to your next saved preset station. English 29

SC1 Note: 1. You can save FM stations to presets before using FM radio. Connect the SC1 to your PC and open the Sena Device Manager. It allows you to save up to 10 FM station frequency presets on the SC1 settings menu. You may do the same operation by using the Sena Smartphone App. 2. You can still answer an incoming phone call and intercom while listening to the FM radio. 12.3 Region Selection You can select the proper FM frequency region from the Sena Device Manager. With the region setting, you may optimize the seek function to avoid unnecessary frequency ranges (factory default: worldwide). Region Frequency Range Step Worldwide 76.0 ~ 108.0 MHz ± 100 kHz Americas 87.5 ~ 107.9 MHz ± 200 kHz Asia 87.5 ~ 108.0 MHz ± 100 kHz Australia 87.5 ~ 107.9 MHz ± 200 kHz Europe 87.5 ~ 108.0 MHz ± 100 kHz Japan 76.0 ~ 95.0 MHz ± 100 kHz 30 13 FUNCTION PRIORITY The SC1 operates in the following order of priority: (highest) Mobile phone Intercom Music sharing by Bluetooth stereo music FM Radio (lowest) Bluetooth stereo music A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by intercom call, and an intercom conversation is interrupted by an incoming mobile phone call.

SC1 The voice prompt for each menu item is as below: 14 CONFIGURATION SETTING (1) Intercom pairing (10) HD intercom (2) Phone pairing (11) Voice prompt (3) Second mobile phone pairing (12) RDS AF setting You can set the configuration of the SC1 by the voice menu instruction (4) Phone selective pairing (13) Noise control described below. (5) Media selective pairing (14) Delete all pairings 1. To enter into voice configuration menu, press and hold the (+) (6) Speed dial (15) Remote control pairing (7) Audio Boost (16) Universal intercom pairing Button or the (-) Button for 10 seconds until the LED shows solid (8) VOX phone (17) Factory reset blue and you hear high toned double beeps. You will also hear a (9) VOX intercom (18) Exit configuration voice prompt, “Configuration menu”. 2. Tap the (+) Button to navigate between the menus. You will hear voice prompts for each menu item as below. 3. You can enable/disable a feature or execute a command by tapping the (-) Button. 4. If no button is pressed within 10 seconds, the SC1 will exit the configuration and go back to stand-by mode. 5. If you want to exit the configuration immediately, tap the (+) Button until you hear a voice prompt, “Exit configuration”, and tap the (-) Button. English 31

SC1 Intercom pairing Phone pairing Second mobile phone pairing Phone selective pairing Media selective pairing Speed dial Audio Boost VOX phone Tap Tapping VOX intercom HD intercom Voice prompt RDS AF setting Noise control Delete all pairings Remote control pairing Universal intercom pairing Factory reset Exit configuration 32 14.1 Intercom Pairing Voice Prompt “Intercom pairing” Factory Default N/A To enter into intercom pairing mode, tap the (+) Button until you hear a voice prompt, “Intercom pairing”. Then tap the (- ) Button to enter into intercom pairing mode. Once two headsets are in intercom pairing mode, tap the (+) Button of any one of the two headsets and soon the intercom connection will automatically be established. The headset will exit from the configuration menu. 14.2 Mobile Phone Pairing Voice Prompt “Phone pairing” Factory Default N/A To go into mobile phone pairing mode, tap the (+) Button until you hear the voice prompt, “Phone pairing”. Please refer to section 5.1, “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device” for details on mobile phone pairing. If you tap the (+) Button, you can exit from the phone pairing mode.

SC1 14.3 Second Mobile Phone Pairing Voice Prompt “Second mobile phone pairing” Factory Default N/A To go into second mobile phone pairing mode, tap the (+) Button until you hear the voice prompt, “Second mobile phone pairing”. Please refer to section 5.2, “Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10” for details on second mobile phone pairing. If you tap the (+) Button, you can exit from the second mobile phone pairing mode. 14.4 Phone selective pairing Voice Prompt “Phone selective pairing” Factory Default N/A To go into phone selective pairing mode, tap the (+) Button until you hear the voice prompt, “Phone selective pairing”. Please refer to section 5.3.2, “HFP for Phone Call Only” for details on phone selective pairing. If you tap the (+) Button, you can exit from the phone selective pairing mode. 14.5 Media Selective Pairing Voice Prompt “Media selective pairing” English Factory Default N/A To go into media selective pairing mode, tap the (+) Button until you hear the voice prompt, “Media selective pairing”. Please refer section 5.3.1, “A2DP Stereo Music Only” for details on media selective pairing. If you tap the (+) Button, you can exit from the media selective pairing mode. 14.6 Assigning Speed Dial Voice Prompt “Speed dial” Factory Default N/A Execute Tap the (-) Button 1. To assign a phone number as a speed dial, tap the (+) Button until you hear a voice prompt, “Speed dial”. 2. Tap the (-) Button, and you will hear a voice prompt, “Speed dial one” and “Phone connected”. 3. Tap the (+) Button to select one of three speed dial numbers and you hear a voice prompt, “Speed dial (#)”. 33

SC1 4. Call a phone number you want to assign and you will hear a voice prompt, “Save speed dial (#)”. The phone number is automatically assigned to the selected speed dial number. Then the phone call will hang up before being connected. 5. To exit the menu, tap the (+) Button until you hear a voice prompt, “Cancel”, and tap the (-) Button to confirm. You will then hear a voice prompt, “Cancel”. If no button is pressed within 1 minute, the SC1 will exit the configuration menu and go back to stand-by mode. Note: 1. After assigning a phone number to one of three speed dials, you can continually assign another phone number to the rest of two speed dials. 2. You can also assign phone numbers for speed dialing by using the Sena Device Manager software or the Sena Smartphone App. Please visit the Sena Bluetooth website at www.sena.com for more information. 34 14.7 Enabling/Disabling Audio Boost Voice Prompt “Audio boost” Factory Default Disable Enable/Disable Tap the (-) Button Enabling Audio Boost increases the overall maximum volume. Disabling Audio Boost reduces the overall maximum volume, but delivers more balanced sound. 14.8 Enabling/Disabling Voice Activated Phone Answering Voice Prompt “VOX phone” Factory Default Enable Enable/Disable Tap the (-) Button If this feature is enabled, you can answer incoming calls by voice. When you hear a ringtone for an incoming call, you can answer the phone by saying a word such as “Hello” loudly or by blowing air into the microphone. VOX phone is temporarily disabled if you are connected to intercom. If this feature is disabled, you have to tap the (+) Button to answer an incoming call.

SC1 14.9 Enabling/Disabling Voice Activated Intercom Voice Prompt “VOX intercom” Factory Default Disable Enable/Disable Tap the (-) Button If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by voice. When you want to start intercom, say a word such as “Hello” loudly or blow air into the microphone. If you start an intercom conversation by voice, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds. However, if you manually start an intercom conversation by tapping the (-) Button within the intercom menu, you have to terminate the intercom conversation manually. However, if you start intercom by voice and end it manually by pressing and holding the (-) Button for 3 seconds, you will not be able to start intercom by voice temporarily. In this case, you have to tap the (-) Button within the intercom menu to restart the intercom. This is to prevent repeated unintentional intercom connections by strong wind noise. After rebooting the SC1, you can start intercom by voice again. 14.10 Enabling/Disabling HD Intercom Voice Prompt “HD intercom” Factory Default Enable Enable/Disable Tap the (-) Button HD Intercom enhances the two-way intercom audio from normal quality to HD quality. HD Intercom will become temporarily disabled when you enter into a multi -way intercom. If this feature is disabled, the two-way intercom audio will change to normal quality. Note: The intercom distance of HD Intercom is relatively shorter than that of normal intercom. English 35

SC1 14.11 Enabling/Disabling Voice Prompts Voice Prompt “Voice prompt” Factory Default Enable Enable/Disable Tap the (-) Button You can disable voice prompts by configuration setting, but the following voice prompts are always on. –– Voice prompts for configuration setting menu –– Voice prompts for battery level indicator –– Voice prompts for speed dial –– Voice prompts for FM radio functions 14.12 Enabling/Disabling RDS AF Voice Prompt “RDS AF setting” Factory Default Disable Enable/Disable Tap the (-) Button RDS AF allows a receiver to re-tune to the second frequency location when the first signal becomes too weak. With RDS AF enabled on the receiver, a radio station with more than one frequency can be used. 36 14.13 Enabling/Disabling Advanced Noise Control™ Voice Prompt “Noise control” Factory Default Enable Enable/Disable Tap the (-) Button When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom. Note: If you use your SC1 with the Bluetooth Audio Pack for GoPro, you can enable or disable this feature only during Normal Audio Recording Mode. This feature is automatically disabled while in Ultra HD (UHD) Audio Mode. 14.14 Delete All Bluetooth Pairing Information Voice Prompt “Delete all pairings” Factory Default N/A Execute Tap the (-) Button To delete all Bluetooth pairing information of the SC1, tap the (+) Button until you hear a voice prompt, “Delete all pairings”, and tap the (-) Button to confirm.

SC1 14.15 Remote Control Pairing Voice Prompt “Remote control pairing” Factory Default N/A Execute Tap the (-) Button To enter into Remote Control Pairing mode, tap the (+) Button until you hear a voice prompt, “Remote control pairing”. Then tap the (-) Button to enter into Remote Control Pairing mode. The headset will automatically exit from the configuration menu. 14.16 Universal Intercom Pairing Voice Prompt “Universal intercom pairing” Factory Default N/A Execute Tap the (-) Button To enter into Universal Intercom Pairing mode, tap the (+) Button until you hear a voice prompt, “Universal intercom pairing”. Then tap the (-) Button to enter into Universal Intercom Pairing mode. The headset will automatically exit from the configuration menu. 14.17 Factory Reset Voice Prompt “Factory reset” Factory Default N/A Execute Tap the (-) Button To restore factory default settings on the SC1, tap the (+) Button until you hear a voice prompt, “Factory reset” , and tap the (-) Button to confirm. The SC1 powers off with a voice prompt, “Headset reset, goodbye”. 14.18 Exit Voice Configuration Menu Voice Prompt “Exit configuration” Factory Default N/A Execute Tap the (-) Button To exit voice configuration menu and get back to stand-by mode, tap the (+) Button until you hear a voice prompt, “Exit configuration”, and tap the (-) Button to confirm. English 37

SC1 Tap (+) Button Tap (-) Button Intercom Paring Execute Phone Pairing None Second Mobile Phone Pairing None Phone Selective Pairing None Media Selective Pairing None Speed Dial Execute Audio Boost Enable/Disable VOX Phone Enable/Disable VOX Intercom Enable/Disable HD Intercom Enable/Disable Voice Prompt Enable/Disable RDS AF Setting Enable/Disable Advanced Noise Control Enable/Disable Delete All Pairings Execute Tap (+) Button Tap (-) Button Remote Control Pairing Execute Universal Intercom Pairing Execute Factory Reset Execute Exit Configuration Execute Voice Configuration Menu & Button Operations 38

SC1 15 REMOTE CONTROL You can remotely control the SC1 via Bluetooth using the Remote Control (sold separately). This eliminates the need to take off your hand for button operations. Your SC1 and the Remote Control must be paired together before use. 1. Turn on the SC1 and the Remote Control. 2. Press the (+) Button or the (-) Button for 10 seconds to enter the configuration menu. Tap the (+) Button until you hear a voice prompt saying, “Remote control pairing”. Press the (-) Button to enter into Remote Control Pairing mode and the red LED will flash rapidly and you will hear multiple beeps. Please refer to section 14.15, “Remote Control Pairing” for more details. 3. Enter Bluetooth pairing mode on your Remote Control. The SC1 will automatically perform pairing with the Remote Control in pairing mode. You will hear a voice prompt, “Remote control connected”, when they are successfully connected. 16 FIRMWARE UPGRADE The SC1 supports firmware upgrades. You can update the firmware using the Sena Device Manager (please refer to section 4.6.1, “Sena Device Manager”). Please visit Sena Bluetooth website at oemsena. com/oem-schuberth/ to check the latest software downloads. English 39

SC1 17 TROUBLESHOOTING 17.1 Intercom Failure When you try to start an intercom conversation with an intercom friend who is unavailable within range or already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later. 17.2 Intercom Reconnection If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected. In this case, the SC1 automatically tries to reconnect the intercom every 8 seconds and you will hear high tone double beeps until the intercom is reestablished. If you do not want to make a reconnection, press and hold the (-) Button for 1 second to stop the attempt. 17.3 Factory Reset If you want to restore the headset to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off. Please refer to section 14.17, “Factory Reset” for more details. 40

SC1 18 QUICK OPERATION REFERENCE Type Function Button Command LED Beep Power on Press the (+) Button and the Solid blue Ascending (-) Button for 1 second beeps Basic Power off Press the (+) Button and the Solid red Descending Function (-) Button for 1 second beeps Volume adjustment Tap the (+) Button or the (-) - - Button Answer mobile Tap the (+) Button - - phone call End mobile phone Press the (+) Button for - - call 2 seconds Mobile Voice dial Press the (+) Button for - - Phone 3 seconds Speed dial Press the (+) Button for - Mid-tone 5 seconds single beep Reject incoming Press the (+) Button for - - call 2 seconds Type Function Button Command LED Beep Press the (-) Button for - - 1 second Intercom pairing Tap the (+) Button Red flashing Mid-tone single beep Tap the (+) Button of any one of the two headsets Press the (-) Button for - - Start/End each 1 second intercom Tap the (-) Button - Mid-tone Intercom double beeps End all intercoms Press the (-) Button for - Mid-tone 3 seconds double beeps Press the (-) Button for - - Start Group 1 second Intercom Press the (-) Button for Blue and red - 1 second flashing End Group Press the (-) Button for - - Intercom 3 seconds Play/Pause Press the (+) Button for - Mid-tone Bluetooth music 1 second double beeps Music Track forward/back Press the (+) Button or the (-) - - Button for 2 seconds English 41

SC1 Type Function Button Command LED Beep FM radio on/off Press the (-) Button for - Mid-tone 5 seconds double beeps FM Radio Select preset Press the (+) Button for - Mid-tone 3 seconds single beep Seek up Press the (+) Button for - High tone 1 second triple beeps 42 CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antennae • Increase the separation between the equipment and the receiver

SC1 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. FCC Caution Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. CE Declaration of Conformity This product is CE marked according to the provisions of the R&TTE Directive (1999/5/EC). Hereby, Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please consult www.sena.com. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. English 43

SC1 Bluetooth License The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners. The product is compliant with and adopts the Bluetooth ® Specification 4.1 and has successfully passed all interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed. WEEE (Waste Electrical and Electronic Equipment) The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please do not dispose of these products as unsorted municipal waste, but hand it in at an official collection point for recycling. 44 SAFETY INFORMATION Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management • Keep the product free of dust. It may damage mechanical and electronic parts of the product. • Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product. • Do not store the product in cold temperatures. Abrupt changes in temperatures may cause condensation and damage electronic circuits. • Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as this may damage the product. • Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product. • Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits. • Do not disassemble, repair or modify the product as this may damage the product and invalidate the product warranty. • Do not store the product in humid environments, especially for long time storage.

SC1 Product Use • In some regions, it is prohibited by law to ride motorcycles while wearing headsets or earbuds. Therefore be certain to comply with all relevant laws in the region before using the product. • The headset is for motorcycle helmets only. To install the headset, you must follow the installation instructions shown in the User’s Guide. • Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability. Keep the volume at a modest level to prevent damage. • Do not cause impact to the product or touch it with sharp tools as this may damage the product. • Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or fire. • Keep product away from pets or small children. It may damage the product. • In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and refrain from using the product. In a place where wireless communication is prohibited, electromagnetic waves may cause hazards or accidents. • Do not use the product near hazardous explosives. When it is near any explosion hazards, turn off the power and heed any regulations, instructions, and signs in the area. • When using the product, be certain to conform to laws regarding the use of communications devices while riding. • Do not put the product where it may hamper the rider’s vision or manipulate it while riding. This may cause traffic accidents. • Before riding, fasten the product to the helmet, and double-check that it is fastened. Separation of the product while riding may cause damage to the product or accidents. • If the product is damaged, stop using it immediately. It may cause damage, explosion, or fire. Battery This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to adhere to the following: • Never separate the battery from the product as this may damage the product. • The battery performance may be reduced over time with usage. • In recharging the battery, make sure to use an approved charger provided by the manufacturer. Use of a non-approved charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or performance of the battery. English 45

SC1 • Any 3rd party USB charger can be used with Sena products if the charger is approved by either the FCC, CE, IC or other locally approved agencies that Sena accepts. • Do not use cigarette chargers other than the included cigarette charger to charge the headset. • Store the battery at temperatures of 15°C~25°C (59°F~77°F). Higher or lower temperatures may reduce the capacity and life of the battery, or may cause temporary non-operation. Do not use the product in sub-zero temperature, because it may cause serious reduction of the battery performance. • If you apply heat to the batter y or throw it into fire, it may explode. • Do not use the product with a damaged battery. It may explode and/ or cause accidents. • Never use a damaged charger. It may explode and/or cause accidents. • Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices used with it. 46 PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Limited Warranty Schuberth guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Schuberth will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture. Warranty Period Schuberth guarantees free-of-charge replacements of defective parts of the product or flaws that may have occurred due to problems in manufacture for a period of 2 years from the date of initial purchase. Termination Quality warranty of the product becomes effective on the date of initial purchase. In addition, the quality warranty of the product expires when the warranty period expires. However, in the following cases, the warranty will be terminated prematurely. • In the event the product has been sold or transferred to a third party. • In the event the manufacturer’s name, serial number, product label, or other markings have been modified or removed.

$SC1 • In the event any unauthorized person has tried to disassemble, repair, or modify the product. Notice and Waiver By buying and using this product, you relinquish considerable legal rights including any claim for compensation for damages. Therefore, be certain to read and understand the following terms and conditions before using the product. Use of this product will constitute consent to this agreement, and forfeiture of rights to all claims. If you do not consent to all the terms and conditions of this agreement, return the product for a refund. 1. You agree that you, your descendants, legal proxies, successors, or transferees will not raise permanent volitional request for any suit, claim, implementation, redemption or similar action from Schuberth and Sena Technologies, Inc ("Sena") with regard to any occasion such as difficulty, pain, suffering, inconvenience, loss, injury, or death which may occur to you or a third party during the use of this product. 2. You must completely understand and accept all risks (including those occurring due to any careless behavior of yours or others) which may occur during the use of this product. 3. You are responsible for ensuring that your medical condition permits usage of the product and that you are in sufficient physical condition for using any device which can be used with it. In addition, you must ensure that the product does not limit your abilities and that you are able to use it safely. 4. You must be an adult who can take responsibilities for using the product. 5. You must read and understand the following warnings and alerts: • Schuberth and Sena together with employees, managers, partners, subsidiaries, representatives, agents, supporting firms and suppliers, sole sellers of Schuberth and Sena (collectively referred to as “the company”) recommend that, before using the product and similar devices of any brands including its derivative models, you collect any relevant information in advance and be entirely prepared in terms of weather, traffic situation, and road conditions. • When you use the product while you operating any vehicle or equipment such as motorcycles, scooters, mopeds, ATVs, or quad-bikes (hereinafter called as “transportation means”), you must take complete caution regardless of the location of such operation. • Use of the product on the road may cause such risks as fracture, serious disability, or death. English 47$

SC1 • Risk factors, which may occur when you use the product, may be due to errors of the manufacturer, its agents, or third parties which are involved in the manufacturing. • Risk factors, which may occur when you use the product, may be unforeseeable. Therefore, you must take full responsibility for any damage or loss caused by all risk factors which may occur when using the product. • When you use the product, use good judgment; never use it under the influence of alcohol. 6. You must read and completely understand all terms and conditions of legal rights and warnings that are involved in using the product. In addition, usage of the product constitutes acceptance of all terms and conditions regarding waiver of rights. Warranty Exclusions Reasons for Limited Liabilities If you do not return the product after purchasing it, you relinquish all rights to liabilities, loss, claims, and claims for reimbursement of expenses (including attorney’s fees). Therefore, Schuberth will not be liable for physical injury, death, or any loss or damage of transportation means, possessions, or assets which belong to you or third parties that may have occurred while you use the product. Further, Schuberth will not be liable for any substantial damage not related to the condition, environment, or malfunction of the product. All risks related with the operation of the product depend entirely on the user regardless of its use by the initial purchaser of a third party. Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the product is entirely your responsibility. 48

SC1 Limitation of Liability TO THE FULL EXTENT ALLOWED BY LAW, SCHUBERTH EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF SCHUBERTH OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT SCHUBERTH'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE, THE TOTAL COMPENSATION LIABILITIES OF SCHUBERTH OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE PURCHASER. Liabilities Disclaimer In addition to damages which may occur due to the use of the product, Schuberth will not be liable for damages of the product which occur due to the following events. • In the event the product is misused or used for purposes other than its intended purposes. • In the event the product is damaged because the user does not follow the content of the product manual. • In the event the product is damaged because it has been left unattended or has undergone any other accident. • In the event the product is damaged because the user has used any parts or software which are not provided by the manufacturer. • In the event the product is damaged because the user has disassembled, repaired, or modified it in such way as is not explained in the product manual. • In the event the product is damaged by a third party. • In the event the product is damaged due to Acts of God (including fire, flood, earthquake, storm, hurricane or other natural disaster). • In the event the surface of the product is damaged by use. English 49

SC1 Warranty Service To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must include the whole package as it was purchased. Free-of-charge Service Schuberth will provide free-of -charge repair or replacement service for the product when product defects occur within the scope of the product warranty during the warranty period. CERTIFICATION ET HOMOLOGATION EN TERMES DE SÉ CURITÉ Dé claration de conformité FCC Cet appareil est en conformité avec la partie 15 de la réglementation FCC. L’exploitation est autorisée aux deux conditions suivantes : (1) Cet appareil ne doit pas créer d’interférences préjudiciables et (2) Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient entraver son bon fonctionnement. Ce matériel a été testé et déclaré en conformité avec les limites d’un appareil numérique de Classe B, suivant la partie 15 de la réglementation FCC. Ces limites sont destinées à assurer une protection raisonnable contre les interférences préjudiciables dans un environnement résidentiel. Ce matériel génère, utilise et peut dégager de l’énergie en radio fréquence et, s’il n’est pas installé et utilisé en conformité avec les instructions, peut provoquer des interférences préjudiciables avec les communications radio. Cependant, il n’y a aucune garantie que des interférences ne se produiront pas dans des installations particulières. Si ce matériel provoque des interférences préjudiciables à une réception radio ou TV, ce qui peut être déterminé en allumant puis en éteignant l’appareil, il est vivement recommandé à l’utilisateur d’essayer de mettre un terme à ces interférences en prenant l’une des mesures suivantes : • Réorienter ou repositionner l'antenne réceptrice. Français

SC1 • Augmenter la séparation entre le matériel et le récepteur • Connecter le matériel à une sortie sur un circuit différent de celui sur lequel le récepteur est connecté. • Contacter le revendeur ou un technicien radio/TV expérimenté pour une assistance. Énoncé FCC sur l’exposition aux radiations RF Cet équipement est conforme aux réglementations FCC d’exposition aux radiations définies pour un environnement non contrôlé. Les utilisateurs suivront les instructions d’exploitation spécifiques pour répondre aux exigences de conformité sur l’exposition aux RF. L’antenne utilisée pour cet appareil ne doit pas fonctionner en même temps qu’une autre antenne ou émetteur, sauf s'il y a conformité avec les procédures FCC des produits multi-émetteurs. Pré cautions FCC Tout changement ou modification apporté au matériel qui n’aurait pas été approuvé par le responsable de la conformité pourrait invalider le droit de l’utilisateur à faire fonctionner ce matériel. Dé claration de conformité CE Ce produit porte un marquage CE, conformément aux dispositions de la directive R&TTE (1999/5/CE). Sena déclare par la présente que ce produit est conforme aux exigences principales et autres dispositions correspondantes de la directive 1999/5/CE. Pour plus d’informations, veuillez consulter le site www.sena.com/fr. Veuillez noter que ce produit utilise des bandes de radio fréquence non uniformisées au sein de l’Union Européenne. Au sein de l’Union Européenne, ce produit est destiné à être utilisé en Autriche, Belgique, Danemark, Finlande, France, Allemagne, Grèce, Irlande, Italie, Luxembourg, Pays-Bas, Portugal, Espagne, Suède et Royaume-Uni et au sein de l’AELE, en Islande, Norvège et Suisse. Dé claration de conformité IC (Industrie Canada) Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) Cet appareil ne doit pas créer d'interférences. (2) L'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Licence Bluetooth La marque et les logos Bluetooth® sont la propriété de Bluetooth SIG, Inc et toute utilisation de ces marques par Sena s’effectue sous licence. D’autres marques et appellations commerciales sont celles de leurs propriétaires respectifs. Le produit est conforme à et suit la spécification Bluetooth® 4.1 et a réussi tous les tests d’interopérabilité mentionnés dans la spécification Bluetooth®. Cependant, l’interopérabilité entre l’appareil et d’autres produits Bluetooth®n’est pas garantie. 66

SC1 WEEE (DEEE : Dé chets d'é quipements é lectriques et é lectroniques) Le symbole poubelle barrée figurant sur le produit, la documentation ou l’emballage signifie que tous les produits électriques et électroniques, les batteries et les accumulateurs doivent être conduits en fin de vie dans une structure de récupération et de recyclage séparée. Cette exigence s’applique à l’Union Européenne mais aussi aux autres pays où des systèmes de récupération et de recyclage séparés existent. Pour prévenir toutes les conséquences possibles pour l’environnement ou la santé d’une élimination de déchets non contrôlée, veuillez ne pas considérer ces produits comme des déchets ménagers, mais vous rendre dans une structure de récupération officielle pour le recyclage. INFORMATIONS SUR LA SÉCURITÉ Veuillez vous assurer que ce produit est utilisé de manière adéquate et que les avertissements et précautions énumérés ci-dessous sont respectés afin d’éviter tout risque et/ou dommage matériel. Stockage du produit et manipulation • Garder le produit à l’abri de la poussière. Cela pourrait endommager les pièces mécaniques et électroniques du produit. • Ne pas stocker le produit dans des zones où la température est élevée, car cela pourrait réduire la durée de vie des composants électroniques, endommager la batterie et/ou faire fondre les pièces en plastique du produit. • Ne pas stocker le produit dans des zones où la température est faible. Des changements de températures brusques peuvent former de la condensation et endommager les circuits électroniques. • Ne pas nettoyer le produit avec des solvants de nettoyage, des produits chimiques toxiques ou des détergents puissants, car cela pourrait endommager le produit. • Ne pas peindre le produit. La peinture pourrait obstruer les pièces amovibles ou interférer avec le fonctionnement normal du produit. • Ne pas laisser tomber ou cogner l’appareil. Cela pourrait endommager le produit ou ses circuits électroniques internes. • Ne pas démonter, réparer ou modifier le produit, car cela pourrait endommager le produit et annuler sa garantie. • Ne pas ranger le produit dans un environnement humide, notamment en cas de stockage prolongé. 67 Français

SC1 Utilisation du produit • L’installation du produit sur le casque moto constitue une modification du casque moto et peut annuler l’autorité de l’utilisateur à utiliser le casque moto. Cela pourrait représenter un risque en cas d’accident. Vous devez donc en être pleinement conscient avant d’utiliser le produit. Si vous n’acceptez pas ce risque, vous pouvez nous retourner le produit pour obtenir un remboursement intégral. • Dans certaines régions, la loi interdit de conduire une moto en portant un casque audio ou des écouteurs. Assurez-vous donc de respecter toutes les lois en vigueur dans la région où vous utilisez le produit. • Ce casque audio est réservé uniquement aux casques moto. Pour installer le casque audio, vous devez suivre les instructions d’installation indiquées dans le Manuel d’utilisation. • L’utilisation du produit à volume élevé pendant une période prolongée peut endommager les tympans ou la capacité auditive. Garder le volume sonore à un niveau modéré pour prévenir tout dommage. • Ne pas heurter le produit ou le toucher avec des outils tranchants, car cela pourrait l’endommager. • Ne pas utiliser le produit dans des zones chaudes ou chauffer le produit, car cela pourrait occasionner des dommages ou provoquer une explosion ou un incendie. • Tenir le produit hors de portée des animaux ou jeunes enfants. Cela pourrait endommager le produit. • É teindre et ne pas utiliser le produit dans les endroits où les communications sans fil sont interdites comme les hôpitaux ou les avions. Les ondes électromagnétiques peuvent entraîner des risques ou des accidents dans ces endroits. • Ne pas utiliser le produit près d’explosifs. En cas de risques d’explosion à proximité, éteindre le produit et respecter toute réglementation, instruction ou panneau présent dans la zone. • Pendant l’utilisation du produit, s’assurer de respecter les lois concernant l’utilisation des appareils de communication lors de la conduite. • Ne pas mettre le produit à un endroit où il pourrait entraver le champ de vision du motocycliste et ne pas le manipuler durant la conduite. Cela pourrait causer des accidents de la route. • Avant de prendre la route, attacher le produit au casque moto et s’assurer qu’il est bien fixé. Le retrait du produit durant la conduite peut provoquer des dommages au produit ou des accidents. • 10U pour Schuberth C3/C3 Pro est compatible avec les casques moto Schuberth E1 et Touratech Aventuro Mod et existe dans les tailles M, L, XL, XXL. • Si le produit est endommagé, arrêter immédiatement de l’utiliser. Cela pourrait entraîner des dommages, une explosion ou un incendie. Batterie Ce produit contient une batterie rechargeable irremplaçable à l’intérieur. S’assurer par conséquent lors de l’utilisation du produit de respecter ce qui suit : • Ne jamais séparer la batterie du produit car cela pourrait endommager le produit. • Les performances de la batterie peuvent s’altérer au fur à et mesure de 68

SC1 son utilisation. • Lors de la mise en charge de la batterie, s’assurer d’utiliser un chargeur agréé fourni par le fabricant. L’utilisation d’un chargeur non agréé peut entraîner un incendie, une explosion, une fuite et d’autres risques et peut également réduire la durée de vie ou les performances de la batterie. • Un chargeur USB tiers peut être utilisé avec les produits Sena à condition d’être aux normes FCC, CE ou IC ou d’être agréés par d’autres organismes locaux que Sena accepte. • Ne pas utiliser d’autres chargeurs allume-cigare que le chargeur allume-cigare inclus pour charger le casque audio. • Stocker la batterie à des températures comprises entre 15 °C et 25 °C. Des températures inférieures ou supérieures à celles préconisées peuvent réduire la durée de vie de la batterie ou entraîner des dysfonctionnements temporaires. Ne pas utiliser ce produit à des températures inférieures à zéro, car cela pourrait réduire de manière drastique les performances de la batterie. • Ne pas chauffer la batterie ou la jeter au feu, car cela pourrait provoquer son explosion. • Ne pas utiliser le produit avec une batterie endommagée. Il pourrait exploser et/ou causer des accidents. • Ne pas utiliser un chargeur endommagé. Il pourrait exploser et/ou causer des accidents. • La durée de vie de la batterie dépend des conditions d’utilisation, des facteurs environnementaux, des fonctions du produit en cours d’utilisation et des appareils utilisés conjointement. GARANTIE DU PRODUIT ET AVIS DE NON- RESPONSABILITÉ Garantie limité e Garantie limitée Sena Technologies, Inc. (« Sena ») garantit la qualité du produit sur la base des caractéristiques techniques énoncées dans le manuel du produit et les données concernant la garantie du produit. La garantie du produit s’étend ici seulement au produit. Sena n’est pas responsable des pertes, blessures aux personnes ou pertes de propriétés qui pourraient résulter de l’utilisation du produit en dehors des pièces défectueuses ou des défauts survenant en raison de problèmes lors de la fabrication. Période de garantie Sena garantit le remplacement sans frais des pièces défectueuses du produit ou des défauts ayant pu survenir en raison de problèmes lors de la fabrication pour une période de deux ans à compter de la date d’achat initiale. FIN DE LA GARANTIE La garantie de qualité du produit prend effet le jour de l’achat initial. De plus, la garantie de qualité du produit expire lorsque la période de garantie expire. Dans les cas suivants toutefois, la garantie prendra fin avant terme. • Dans le cas où le produit a été vendu ou transféré à un tiers. Français 69

$SC1 • Dans le cas où le nom, le numéro de série, l'étiquette du produit ou d'autres marquages du fabricant ont été modifiés ou supprimés. • Dans le cas où une personne non autorisée a tenté de démonter, réparer ou modifier le produit. Avis et renonciation En achetant et en utilisant ce produit, vous renoncez à des droits légaux importants y compris les demandes d’indemnisation pour dommages. En conséquence, assurez-vous de lire et de comprendre les conditions suivantes avant d’utiliser le produit. L’utilisation de ce produit constitue un consentement au présent accord et un renoncement aux droits à toute indemnisation. Si vous ne consentez pas à toutes les conditions du présent accord, renvoyez le produit pour un remboursement. 1. Vous convenez que vous, vos descendants, représentants légaux, héritiers, ou cessionnaires ne ferez de votre propre gré et, de manière permanente, de demande de procès, d’indemnisation, d’exécution, de rachat ou toute action similaire à l’encontre de Sena concernant toute occasion comme la difficulté, la douleur, la souffrance, le désagrément, la perte, la blessure ou le décès qui se produirait à votre encontre ou à un tiers durant l’utilisation de ce produit. 2. Vous devez parfaitement comprendre et accepter tous les risques (y compris ceux se produisant en raison de votre négligence ou d’autres) pouvant survenir durant l’utilisation de ce produit. 3. Vous avez la responsabilité de vous assurer que votre condition médicale permet l’utilisation du produit et que votre condition physique est suffisante pour utiliser tout appareil pouvant être utilisé conjointement. De plus, vous devez vous assurer que le produit ne limite pas vos capacités et que vous êtes en mesure de l’utiliser en toute sécurité. 4. Vous devez être majeur et porter la responsabilité de l’utilisation du produit. 5. Vous devez lire et comprendre les avertissements et les alertes suivantes : • Sena, en collaboration avec les employés, responsables, partenaires, filiales, représentants, agents, entreprises et fournisseurs impliqués, seuls vendeurs de Sena (collectivement désignés comme « l’entreprise ») vous recommandent, avant d’utiliser le produit et des appareils similaires de différentes marques y compris leurs modèles dérivés, de recueillir à l’avance toutes les informations pertinentes et d’être entièrement préparé quant aux conditions météorologiques et routières ainsi qu’à l’état de la circulation. • Si vous utilisez le produit tout en conduisant un véhicule tel que des motos, scooters, cyclomoteurs, quatre-quatre ou quads (ci-après dénommés « moyens de transport »), vous devez faire preuve de la plus grande prudence quel que soit l’endroit d’utilisation. • L'utilisation du produit sur la route peut entraîner des risques de fractures, d'invalidité grave ou de décès. 70$

SENA TECHNOLOGIES SP35 SC1 User Manual

Sena Technologies,Inc. SC1

User Manual

Navigation menu

Namespaces

Views

Navigation