SENA TECHNOLOGIES SP35 SC1 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3328826
Application ID	LNSxkK7AJDnllGmFmAonFg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	122.8kB (1535061 bits)
Date Submitted	2017-03-23 00:00:00
Date Available	2017-09-19 00:00:00
Creation Date	2017-03-14 10:12:26
Producing Software	Microsoft® Word 2010
Document Lastmod	2017-03-14 10:12:26
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	i

English
Schuberth SC1
www.schuberth.com
User’s Guide
SC1
© 1998-2016 Sena Technologies, Inc. All rights reserved.
Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice.
Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. Prism™, Bluetooth Audio Pack for GoPro® ,
Tufftalk™, 20S™, 10S™, 10C™, 10U™, 10R™, 3S™, SMH10™, SMH10R™, SMH5™, SMH5-FM™, SMH3™, SPH10™, SPH10H™, SPH10H-FM™,
SPH10S™, Expand™, Bluetooth Mic&Intercom™, Handlebar Remote™, Wristband Remote™, SM10™, SR10™, SR10i™ are trademarks of Sena
Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena.
®
GoPro is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (“Sena”) is not affiliated with W oodman
®
Labs. The Sena Bluetooth Pack for GoPro
is an after-market accessory specially designed and manufactured by Sena Technologies,
®
Inc. for the GoPro Hero3 and Hero4 allowing for Bluetooth capabilities.
®
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod
touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or
registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their respective owners.
SC1
English
CONTENTS
1 INTRODUCTION........................................................................................................
2 PACKAGE CONTENTS.............................................................................................
3 INSTALLING THE SC1 ON YOUR HELMET............................................................ 7
3.1 Installing the SC1.....................................................................................................................
3.2 Taking out the SC1...................................................................................................................
4 GETTING STARTED.................................................................................................
4.1
4.2
4.3
4.4
4.5
4.6
Button Operation...................................................................................................................... 9
Powering On and Off............................................................................................................... 9
Charging.................................................................................................................................. 9
Checking the Battery Level................................................................................................... 10
Volume Adjustment................................................................................................................ 10
Sena Softwares...................................................................................................................... 11
5 PAIRING THE SC1 WITH BLUETOOTH DEVICES.............................................. 11
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device.......................................... 12
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10............................ 12
5.3 Advanced Selective Pairing - A2DP Stereo or Handsfree.................................................... 13
6 MOBILE PHONE, GPS, SR10................................................................................ 14
6.1
6.2
6.3
6.4
Mobile Phone Call Making and Answering...........................................................................
Speed Dialing........................................................................................................................
GPS Navigation......................................................................................................................
Sena SR10, Two-Way Radio Adapter....................................................................................
14
15
16
16
7 STEREO MUSIC..................................................................................................... 16
............................................................. 16
....................................................................... 17
7.1 Bluetooth Stereo Music
7.2 Music Sharing
INTERCOM............................................................................................................. 17
8.1 Intercom Pairing.....................................................................................................................
8.2 Two-way Intercom..................................................................................................................
8.3 Three-way Intercom...............................................................................................................
8.4 Four-way Intercom.................................................................................................................
8.5 Team Signal...........................................................................................................................
THREE-WAY CONFERENCE
PHONECALLWITHINTERCOM
18
19
20
21
22
PARTICIPANT
22
........................................................................................................
10 GROUP INTERCOM............................................................................................... 23
11 UNIVERSAL INTERCOM....................................................................................... 24
11.1
11.2
11.3
11.4
Universal Intercom Pairing....................................................................................................
Two-way Universal Intercom..................................................................................................
Three-way Universal Intercom...............................................................................................
Four-way Universal Intercom.................................................................................................
25
25
26
27
12 FM RADIO............................................................................................................... 29
12.1 FM Radio On and Off............................................................................................................. 29
12.2 Preset Stations....................................................................................................................... 29
12.3 Region Selection.................................................................................................................... 30
13 FUNCTION PRIORITY........................................................................................... 30
SC1
14 CONFIGURATION SETTING................................................................................. 31
14.1 Intercom Pairing..................................................................................................................... 32
14.2 Mobile Phone Pairing............................................................................................................. 32
14.3 Second Mobile Phone Pairing............................................................................................... 33
14.4 Phone selective pairing......................................................................................................... 33
14.5 Media Selective Pairing......................................................................................................... 33
14.6 Assigning Speed Dial............................................................................................................ 33
14.7 Enabling/Disabling Audio Boost............................................................................................ 34
14.8 Enabling/Disabling Voice Activated Phone Answering........................................................ 34
14.9 Enabling/Disabling Voice Activated Intercom....................................................................... 35
14.10 Enabling/Disabling HD Intercom....................................................................................... 35
14.11 Enabling/Disabling Voice Prompts.................................................................................... 36
14.12 Enabling/Disabling RDS AF............................................................................................... 36
14.13 Enabling/Disabling Advanced Noise Control™ ............................................................... 36
14.14 Delete All Bluetooth Pairing Information............................................................................ 36
14.15 Remote Control Pairing...................................................................................................... 37
14.16 Universal Intercom Pairing................................................................................................. 37
14.17 Factory Reset..................................................................................................................... 37
14.18 Exit Voice Configuration Menu........................................................................................... 37
15 REMOTE CONTROL.............................................................................................. 39
16 FIRMWARE UPGRADE.......................................................................................... 39
17 TROUBLESHOOTING............................................................................................ 40
17.1 Intercom Failure..................................................................................................................... 40
17.2 Intercom Reconnection......................................................................................................... 40
17.3 Factory Reset......................................................................................................................... 40
18 QUICK OPERATION REFERENCE....................................................................... 41
CERTIFICATION AND SAFETY APPROVALS ...................................... 42
........................................................... 42
.......................................................... 43
........................................................................... 43
.......................................................... 43
............................................................ 43
...................................................................... 44
................................... 44
SAFETY INFORMATION ................................................................ 44
• Product Storage and Management ..................................................... 44
• Product Use ............................................................................ 45
• Battery ................................................................................. 45
PRODUCT WARRANTY AND DISCLAIMER ........................................ 46
• Limited Warranty ....................................................................... 46
• Warranty Exclusions ................................................................... 48
• Warranty Service ....................................................................... 50
• FCC Compliance Statement
• FCC RF Exposure Statement
• FCC Caution
• CE Declaration of Conformity
• Industry Canada Statement
• Bluetooth License
• WEEE (Waste Electrical and Electronic Equipment)
SC1
The SC1 features:
• Bluetooth 4.1
• Invisible beauty with custom design
Thank you for choosing the Schuberth SC1. With the SC1, you can call
handsfree on your Bluetooth mobile phone, listen to stereo music or
voice instructions of GPS navigations wirelessly, and have intercom
conversations in full duplex with a passenger or other motorcycle
riders.
• Bluetooth intercom up to 1.6 kilometer (1.0 miles)*
• Four-way intercom
• Voice prompts
• Smartphone App for iPhone and Android
• Built-in FM radio tuner with a station scan and save function
The SC1 is compliant with the Bluetooth 4.1 supporting the following
profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio
Distribution Profile (A2DP), and Audio Video Remote Control Profile
(AVRCP). Please check with the manufacturers of other device to
determine their compatibility with this headset.
Please read this User’s Guide carefully before using the headset. Also
check www.schuberth.com for the latest version of the User’s Guide
and additional information related to Sena Bluetooth products.
• Universal Intercom™
• Music sharing
• Advanced Noise Control™
• Firmware upgradeable
* in open terrain
English
1 INTRODUCTION
5
SC1
Key Specifications:
• Bluetooth 4.1
• Supporting profiles: Headset Profile, Hands-Free Profile (HFP),
Advanced Audio Distribution Profile (A2DP), and Audio Video
Remote Control Profile (AVRCP).
PACKAGE CONTENTS
• SC1 Main Unit
SC1
INSTALLING THE SC1 ON YOUR HELMET
English
• Battery
LED
(+) Button
• Release Tool
(-) Button
DC Power Charging &
Firmware Upgrade Port
SC1
3.1 Installing the SC1
3.2 Taking out the SC1
1. Insert the main unit into the helmet and push it gently until you
hear a click.
1. Insert the release tool into the main unit and push it gently
until you hear a click.
Click
Click
2. Insert the battery into the helmet and push it gently until it is
all the way in.
2. Pull the release tool until the main unit comes off the helmet.
SC1
4.3 Charging
You can charge the headset by connecting the supplied USB power &
data cable into a computer’s USB port or USB wall charger. You can
use any standard micro USB cable to charge the unit. The LED turns
red while charging and turns blue when fully charged. It takes about
2.5 hours to be completely charged.
4.1 Button Operation
(+) Button
(–) Button
AC Adapter
or
4.2 Powering On and Off
To power on the headset, press and hold the (+) Button and the (-)
Button at the same time for 1 second while hearing ascending beeps
and a voice prompt, “Hello”. To power off the headset, press and
hold the (+) Button and the (-) Button at the same time for 3 seconds
while hearing descending beeps and a voice prompt, “Goodbye”.
Note:
Please make sure to take off your SC1-installed helmet while charging.
The headset automatically turns off during charging.
English
4 GETTING STARTED
SC1
4.4 Checking the Battery Level
4.5 Volume Adjustment
4.4.1 LED Indicator
You can easily adjust the volume by tapping the (+) Button or the (-)
Button. You will hear a beep when the volume reaches the maximum
or minimum level. The volume is set and maintained independently at
different levels for each audio source even when you reboot the
headset. For example, once you set the volume for mobile phone
handsfree, it will not change even if you adjust the volume for your
Bluetooth MP3 music. However, if you adjust the volume during
stand-by mode, it will affect volume levels of every audio source.
When the headset is powering on, the red LED flashes rapidly
indicating the battery level.
4 flashes = High, 70 ~ 100%
3 flashes = Medium, 30 ~ 70%
2 flashes = Low, 0 ~ 30%
4.4.2 Voice Prompt Indicator
When you power on the headset, keep pressing the (+) Button
and the (-) Button simultaneously for about 3 seconds until you
hear three, high toned beeps. Then you will hear a voice prompt
indicating the battery level. However, if you release the buttons
as soon as the headset turns on, you will not hear a voice prompt
for the battery level indication.
10
SC1
4.6 Sena Softwares
4.6.1 Sena Device Manager
4.6.2 Sena Smartphone App
The Sena Smartphone App allows you to configure device settings and
read the User’s Guide and the Quick Start Guide. Pair your phone with
your SC1 headset (please refer to section 5.1, “Mobile Phone Pairing Mobile Phone, Bluetooth Stereo Device”). Run the Sena
Smartphone App and you can configure its settings directly from
your smartphone. You can download the Sena Smartphone App
for Android or iPhone from www.sena.com/headset-app.
li
The Sena Device Manager allows you to upgrade the firmware
and configure the device settings directly from your PC. Using
this software, you can assign speed dial presets, FM radio
frequency presets and more. It is available for both Windows and
Mac. For more information on downloading the Device Manager,
please visit oemsena.com/oem-schuberth/.
5 PAIRING THE SC1 WITH BLUETOOTH
DEVICES
Before using the SC1 Bluetooth headset with any other Bluetooth devices
for the first time, you will need to pair them together. You can pair the
SC1 with Bluetooth mobile phones, Bluetooth stereo devices such as
MP3 players, or motorcycle specific Bluetooth GPS navigation, and with
other Sena Bluetooth headsets. The pairing operation is required only
once for each Bluetooth device. The headset remains paired with the
devices and automatically reconnects to them when they are within range.
You will hear a high toned single beep and a voice prompt whenever the
headset reconnects to the paired device:
“Phone connected” to a mobile phone, “Media connected” to
a Bluetooth stereo device.
11
SC1
5.1 Mobile Phone Pairing Bluetooth Stereo Device
Mobile
Phone,
1. Press and hold the (+) Button or the (-) Button for 10 seconds
until you hear the voice prompt, “Configuration menu”.
2. Tap the (+) Button until you hear a voice prompt, “Phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the
SC1 in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for
the PIN.
5. The mobile phone confirms that pairing has completed and the
SC1 is ready to use. You will hear a voice prompt, “Your
headset is paired”.
6. If the pairing process is not completed within three minutes,
the SC1 will return to stand-by mode.
Note:
1. If a Bluetooth connection between the headset and a mobile phone is
disconnected, press the (+) Button for 3 seconds until you hear a high
tone single beep to recover the Bluetooth connection immediately.
2. If the Bluetooth connection between the headset and a media player is
disconnected, press the (+) Button for 1 second to recover the Bluetooth
connection and play.
12
5.2 Second Mobile Phone Pairing - Second
Mobile Phone, GPS, and SR10
Typical Bluetooth headsets can connect with only one Bluetooth
device, but a second mobile phone pairing allows the headset to
connect with another Bluetooth device such as a second mobile
phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter.
1. To enter the voice configuration menu, press and hold the (+)
Button or the (-) Button for 10 seconds until you hear the
voice prompt, “Configuration menu”.
2. Tap the (+) Button until you hear a voice prompt, “Second
mobile phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the
SC1 in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for
the PIN.
5. The mobile phone confirms that the pairing has completed
and the SC1 is ready to use. You will hear a voice prompt,
“Your headset is paired”.
SC1
1. If you have two audio (A2DP) devices connected to your headset then
the audio from one device will interrupt the audio from the other device.
For example, if you are playing music from the primary mobile phone,
then it can be interrupted by playing music from the secondary mobile
phone and vice versa.
2. You have to use a motorcycle specific GPS, which transmits turn-byturn voice instructions to the headset by Bluetooth. Most automotive
GPS systems do not have this feature.
3. The Sena SR10 is a Bluetooth two-way radio adapter for group
communication, and uses Hands-Free Profile. The incoming audio from
the two-way radio via SR10 is heard in the background while having an
intercom conversation or a mobile phone call.
4. The GPS navigation or a radar detector could be connected to the SR10 by
wire. The GPS voice instruction or the radar detector alarm is also heard in
the background via SR10 while having an intercom conversation or a phone
call. Please refer to the SR10 User’s Guide for details.
5.3 Advanced Selective Pairing - A2DP
Stereo or Handsfree
When you are using a smartphone, sometimes you may need to
selectively use the SC1 for A2DP stereo music only or for mobile
phone handsfree only. These instructions are for advanced users
who want to pair the SC1 to their smartphones with only one
selective profile: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the SC1, you must
clear the previous pairing list on both devices: the mobile phone and
the SC1. To clear the pairing list on the SC1, please do a factory
reset or following the pairing list clearing procedure described in
section 14.17, “Factory Reset” or 14.14, “Delete All Bluetooth Pairing
Information”. To clear the pairing list on the mobile phone, please
refer to the mobile phone manual. For most smartphones, delete the
SC1 from the list of Bluetooth devices in the settings menu.
13
English
Note:
SC1
5.3.1 A2DP Stereo Music Only
1. To enter the voice configuration menu, press and hold the (+)
Button or the (-) Button for 10 seconds until you hear the
voice prompt, “Configuration menu”.
2. Tap the (+) Button until you hear the voice prompt, “Media
selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
SC1 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for
the PIN.
5.3.2 HFP for Phone Call Only
1. To enter the voice configuration menu, press and hold the (+)
Button or the (-) Button for 10 seconds until you hear the
voice prompt, “Configuration menu”.
2. Tap the (+) Button until you hear the voice prompt, “Phone
selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
SC1 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for
the PIN.
14
6 MOBILE PHONE, GPS, SR10
6.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, tap the (+) Button to answer
the call.
2. You can also answer the incoming call by loudly speaking any
word of your choice if Voice Activated Phone Answering (VOX
Phone) is enabled, unless you are connected to intercom.
3. To end a call, press the (+) Button for 2 seconds until you hear a
mid-tone single beep, or wait for the called person to end the call.
4. To reject a call, press the (+) Button for 2 seconds until you
hear a beep while the phone is ringing.
5. There are several ways to make a phone call:
–– Enter numbers on your mobile phone’s keypad and make a
call. Then the call is automatically transferred to the headset.
–– In stand-by mode, press the (+) Button for 3 seconds, to
activate the voice dialing of your mobile phone. For this, the
voice dialing function must be available on the mobile phone.
Refer to your mobile phone manual for further instruction.
SC1
1. If you have two phones connected to your headset and you have an
incoming call from the second phone during the call of the first phone,
then you may still receive the call from the second phone. In this case,
the call from the first phone is on waiting mode. If you end a call, then it
will automatically guide you to the first phone call.
2. If you have a mobile phone and a GPS connected to your headset, you
may not be able to listen to the GPS voice instruction during the phone
call.
6.2 Speed Dialing
You can quickly make a phone call by using the voice speed dial
menu.
1. To enter into the voice speed dial menu, press and hold the
(+) Button for 5 seconds and you will hear a mid-tone single
beep and a voice prompt saying “Speed dial”.
2. Tap the (+) Button to navigate between the menus. You will
hear voice prompts for each menu item.
4. After selecting the last number redial menu, you will hear a
voice prompt, “Last number redial”. Then, to redial the last
phone call number, tap the (-) Button.
5. To call one of the speed dials, tap the (+) Button to navigate
between the menus until you hear a voice prompt saying
“Speed dial (#)”. Then, tap the (-) Button.
6. If you want to exit the speed dial immediately, tap the (+) Button
until you hear a voice prompt saying “Cancel”, and tap the (-)
Button. If you do not press any button within 15 seconds, the SC1
will exit the voice speed dial menu and go back to stand-by mode.
Note:
1. Make sure that you connect the mobile phone and the headset to use
the speed dial function.
2. You need to assign speed dial numbers before using the speed dial
(please refer to section 14.6, “Assigning Speed Dial”).
3. Tap the (-) Button to select a voice menu among the followings:
(1) Last number redial
(4) Speed dial 3
(2) Speed dial 1
(5) Cancel
(3) Speed dial 2
15
English
Note:
SC1
6.3 GPS Navigation
If you pair a Bluetooth GPS to the SC1 as described in section
5.2, “Second Mobile Phone Pairing - Second Mobile Phone, GPS,
and SR10” , you can listen to GPS instructions wirelessly. Tap
the (+) Button or the (-) Button to adjust volume. The GPS voice
instruction interrupts intercom conversation but it is automatically
reestablished after the GPS voice instruction ends.
7 STEREO MUSIC
7.1 Bluetooth Stereo Music
6.4 Sena SR10, Two-Way Radio Adapter
The Bluetooth audio device must be paired with the SC1 by following the
“Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device”
procedures described in the section 5.1. The SC1 supports the Audio/
You can use a two-way radio and the SC1 Bluetooth intercom
simultaneously by using the Sena SR10, a Bluetooth Two-way Radio
Adapter (please refer to section 5.2, “Second Mobile Phone Pairing Second Mobile Phone, GPS, and SR10”). Incoming audio from the
two-way radio will not interrupt an intercom conversation but is heard
in the background. This is useful when you have an intercom
conversation with a passenger on the back seat and use a two-way
radio for group communication with other motorcycle riders.
Video Remote Control Profile (AVRCP), so if your Bluetooth
audio device also supports the AVRCP, you can use the SC1 to
remotely control music playback. Not only can you adjust the
volume but you can also use functions such as play, pause, next
track and previous track.
1. To play or pause music, press the (+) Button for 1 second
until you hear a double beep.
2. To adjust the volume, tap the (+) Button or the (-) Button.
3. To track forward or track back, press and hold the (+) Button or
the (-) Button for 2 seconds until you hear a mid-tone single beep.
16
SC1
7.2 Music Sharing
Note:
1. Both you and your intercom friend can remotely control music playback
such as track forward and track back.
2. Music sharing will be paused when you are using your mobile phone or
listening to GPS instructions.
English
You can start sharing music with an intercom friend using Bluetooth
stereo music during a two-way intercom conversation (please refer to
section 8.2, “Two- way Intercom”). When you terminate music sharing,
you can go back to the intercom conversation. To start or terminate
sharing music, press the (+) Button for 1 second during an intercom
conversation until you hear a double beep. To track forward or track back,
press and hold the (+) Button or the (-) Button for 2 seconds.
INTERCOM
To enter the intercom pairing mode, call intercom friends, or start
group intercom, you must enter the intercom menu by pressing
the (-) Button for 1 second. If you perform any action within the
intercom menu, you will automatically exit from the menu.
Intercom Functions
Button Operation
Enter intercom menu
Press the (-) Button for 1 second
- Enter intercom pairing mode
Tap the (+) Button
- Call first intercom friend
Tap the (-) Button
- Call second intercom friend
Double tap the (-) Button
- Call third intercom friend
Triple tap the (-) Button
- Start Group Intercom
Press the (-) Button for 1 second
- Exit intercom menu
Press the (+) Button for 3 seconds
17
SC1
8.1 Intercom Pairing
8.1.1 Pairing with Other SC1 Headsets for
Intercom Conversation
The SC1 can be paired with up to three other headsets for
Bluetooth intercom conversation.
1. Turn on the two SC1 headsets (A and B) that you would like
to pair with each other.
2. Press and hold the (-) Button for 1 second to enter the
intercom menu.
3. Tap the (+) once, and you will hear a mid-tone single beep
and the voice prompt, “Intercom pairing”.
4. Simply tap the (+) Button of any one of the two headsets A or B and
wait until the LEDs of both headsets turn to blue and intercom
connection is automatically established. The two SC1 headsets A and
B are paired with each other for intercom conversation. If the pairing
process is not completed within one minute, the SC1 will
return to stand-by mode.
Pairing A & B
5. You can make other pairing between headsets A and C, and
between headsets A and D by following the same procedure
as above.
18
SC1
Note:
For example, after the pairing procedures listed above, headset D is the
first intercom friend of headset A. Headset C is the second intercom
friend of headset A, and headset B is the third intercom friend of
headset A.
8.1.2 Pairing with Other Sena Headset Models for
Intercom Conversation
The SC1 can be paired with all other Sena headset models such as the
20S, SMH10 and the SMH5 for intercom conversation. Please follow the
same procedure as above to pair with these headset models.
8.2 Two-way Intercom
English
6. The intercom pairing queue is ‘Last-Come, First-Served ’. If
a headset has multiple paired headsets for intercom
conversations, the last paired headset is set as first intercom
friend. The previous intercom friend becomes second
intercom friend, and third intercom friend.
8.2.1 Starting Two-way Intercom
You can start an intercom conversation with one of any intercom
friends by tapping the (-) Button within the intercom menu. Press and
hold the (-) Button for 1 second to enter the intercom menu. Tap the
(-) Button once to intercom with the first intercom friend, tap the (-)
Button twice to intercom with the second intercom friend , and tap
the (-) Button three times to intercom with the third intercom friend.
8.2.2 Ending Two-way Intercom
You can end an intercom conversation by using tapping the (-) Button
within the intercom menu. Press and hold the (-) Button for 1 second
to enter the intercom menu. Tap the (-) Button once to end intercom
with the first intercom friend, tap the (-) Button twice to end
intercom with the second intercom friend, and tap the (-) Button
three times to end intercom with the third intercom friend.
Note:
The SMH5 cannot participate in three-way or four-way conference
intercom with the SC1. The SMH5 has a limited capability of having twoway intercom with other Sena headsets.
19
SC1
8.3 Three-way Intercom
8.3.1 Starting Three-way Intercom
You (A) can have a three -way conference intercom with two
other SC1 friends (B & C) by establishing two intercom
connections simultaneously. While a three-way conference
intercom is in progress, mobile phone connection of all three
participants is temporarily disconnected. However, as soon as the
conference intercom terminates or one of the participants leaves
the intercom, all mobile phones automatically reconnect to their
headsets. If you have an incoming mobile phone call during the
conference intercom, terminate the conference intercom to
automatically reconnect and receive the phone call.
1. You (A) need to be paired with two other friends (B & C) for
three-way conference intercom.
2. Start an intercom conversation with one of the two friends in
your intercom group. For example, you (A) may start an
intercom conversation with the intercom friend (B). Or
intercom friend (B) may start an intercom call with you (A).
(A)
First Friend
(B)
Second Friend
(C)
3. You (A) can call the second intercom friend (C) by double
tapping the (-) Button within the intercom menu, or the second
intercom friend (C) may join the intercom by making an
intercom call to you (A).
Pairing
(A)
Pairing
(A)
First Friend
(B)
20
Second Friend
(C)
First Friend
(B)
Second Friend
(C)
SC1
(A)
First Friend
(B)
Second Friend
(C)
8.3.2 Ending Three-way Intercom
You can completely terminate the conference intercom or just
disconnect an intercom connection with one of your active
intercom friends.
1. Press and hold the (-) Button for 3 seconds until you hear a
beep to terminate three-way conference intercom completely.
It terminates both intercom connections with (B) and (C).
2. Tap or double tap the (-) Button within the intercom menu to
disconnect intercom connection with one of the two intercom friends
accordingly. For example by single tapping the (-) Button within the
intercom menu, you can terminate the intercom connection with just
the first intercom friend (B). However, you still have the intercom
connection with your second intercom friend
8.4 Four-way Intercom
English
4. Now you (A) and two SC1 intercom friends (B & C) are having
a three-way conference intercom.
8.4.1 Starting Four-way Intercom
You can have four-way conference intercom with three other SC1
users by adding one more intercom participant to the three -way
intercom. While you are having a three-way intercom as above in
section 8.3, “Three-way Intercom”, a new participant (D), who is
an intercom friend of your intercom friend (C), may join the
conference intercom by making an intercom call to your intercom
friend (C). Please note that in this case, the new participant (D) is
an intercom friend of (C), not of you (A).
8.4.2 Ending Four-way Intercom
As same in the case of three-way intercom, you can completely
get out of the four-way conference intercom or just disconnect a
single intercom connection.
1. Press and hold the (-) Button for 3 seconds until you hear a beep
to terminate four-way conference intercom. It terminates the
intercom connections between you (A), and your intercom friends
(B) and (C).
(C).
21
SC1
2. Tap or double tap the (-) Button within the intercom menu to
disconnect the intercom connection with one of the two
intercom friends accordingly. However, when you disconnect
the second friend (C) by double tapping the (-) Button within
the intercom menu, you will be disconnected with the third
participant (D) as well. This is because the third participant
(D) is connected with you via the second friend (C).
Note:
Multiple headsets are connected during multi-way intercom. With various
signals interfering each other, the intercom distance of multi-way intercom
is relatively shorter than that of two-way intercom.
8.5 Team Signal
You can search for your team by sending a team signal. If there is a
teammate within the signal range, you will hear a bell sound. Tap the
(+) and the (-) Button to send a team signal.
THREE-WAY CONFERENCE PHONE CALL
WITH INTERCOM PARTICIPANT
1. When you have an incoming mobile phone call during an
intercom conversation, you will hear a ring tone. You can
choose whether to 1) answer the mobile phone call and stop
the intercom conversation, or 2) reject the phone call and stay
on the intercom conversation.
1) To answer the phone call and stop the intercom conversation,
tap the (+) Button. The VOX Phone feature does not work if
you are connected to intercom. When you hang up the phone
call, the intercom will automatically be recovered.
2) To reject the phone call and stay on the intercom conversation,
press the (+) Button for 2 seconds until you hear a beep.
Unlike other motorcycle Bluetooth headsets, this prevents a
user from being dropped out of an intercom conversation by
an incoming mobile call.
22
SC1
3. You can have a three-way conference phone call by adding an
intercom friend to the mobile phone conversation. During a
mobile phone conversation, tap the (-) Button within the intercom
menu to invite one of the intercom friends to the mobile phone
line. To disconnect the intercom or the phone call, you must wait
for the other caller to hang up or end the intercom conversation.
10 GROUP INTERCOM
English
2. When you have an incoming intercom call during a mobile
phone call, you will hear 4 high toned beeps, alerting you that
there is an incoming intercom call. You will also hear a voice
prompt, “Intercom requested”. In this case, the intercom call
does not override the mobile call because intercom has lower
priority than mobile call. You have to hang up the mobile
phone call to make or receive an intercom call.
Group Intercom allows you to instantly create a multi-way conference
intercom with three other most recently paired headsets.
1. Go through intercom pairing with up to three headsets you
want to have Group Intercom with.
2. Press and hold the (-) Button for 1 second within the intercom
menu to begin Group Intercom. The LED will flash blue and
red simultaneously and you will hear a voice prompt, “Group
intercom”.
3. To terminate Group Intercom, press the (-) Button for 3
seconds during Group Intercom. You will hear a voice prompt,
“Group intercom terminated”.
Note:
Group Intercom supports SC1, 10Upad, 10U, 10C, 10R, 10S, 20S, and
Tufftalk only. Other headsets will be excluded from Group Intercom.
23
SC1
11 UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth
headsets using the Universal Intercom function. Non -Sena Bluetooth
headsets can be connected to the Sena Bluetooth headset if they
support the Bluetooth Hands -Free Profile (HFP). The working
distance may differ depending on the performance of Bluetooth
headset that it is connected to. In general, it is shorter than normal
intercom distance since it uses the Bluetooth Hands-Free Profile. The
Universal Intercom affects both the phone call connection and the
multipoint connection (mostly used for GPS connections for riders).
You cannot use a multipoint connection device while you are using
the Universal Intercom in case as below.
24
1. If a non-Sena headset does not support a multipoint
connection, it cannot use a phone call connection while using
the Universal Intercom.
2. As for Sena headsets, the Universal Intercom affects the
multipoint connection.
3. If non-Sena headset (already paired as Universal Intercom
with Sena) is turned on, then the multipoint connection is
automatically deactivated. And the non-Sena headset is
automatically connected to Sena headset as a Universal
Intercom. So you cannot use multipoint connection devices
such as GPS, while a non-Sena headset is turned on.
4. Even though you disconnect the non-Sena headset as a
Universal Intercom, it will not automatically restore the multipoint
connection. To restore the multipoint connection, you should turn
off the non-Sena headset first, then try to connect to multipoint
device manually from the device screen or simply reboot the
device so that it automatically connects to the Sena headset.
SC1
11.2 Two-way Universal Intercom
The SC1 can be paired with non- Sena Bluetooth headsets for
Bluetooth intercom conversation. You can pair the SC1 with only one
non-Sena Bluetooth headset so if you pair with a different non-Sena
Bluetooth headset, the previous pairing will be removed.
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. Within the intercom menu,
you may single tap the (-) Button to begin an intercom conversation
with the first intercom friend, double tap with the second intercom
friend, and triple tap with the third intercom friend.
1. Turn on the SC1 and a non-Sena Bluetooth headset that you
want to pair with.
2. Press and hold the (+) Button or the (-) Button for 10 seconds to
enter the configuration menu. Tap the (+) Button until you hear a
voice prompt, “Universal intercom pairing”. Tap the (-) Button
to enter into Universal Intercom Pairing mode and the blue LED
will flash rapidly and you will hear multiple beeps. Please refer to
section 14.16, “Universal Intercom Pairing” for more details.
3. Perform the operation required for handsfree pairing on the nonSena Bluetooth headset (refer to the User’s Manual for the
headsets you want to use). The SC1 will automatically pair with a
non-Sena Bluetooth headset when each are in pairing mode.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, by activating the voice dialer or using the redialing
operation. You may also disconnect the existing connection by
using the operation to end a call (refer to the User’s Manual for
the headsets for voice dialer, redialing, and ending a call).
25
English
11.1 Universal Intercom Pairing
SC1
11.3 Three-way Universal Intercom
You may make a three- way Universal Intercom connection with two
SC1s and one non-Sena Bluetooth headset. If the intercom
connection is made, all headsets connected cannot use the mobile
phone call function since the connection between the headset and
the phone is disconnected temporarily. If you disconnect the intercom
call, the mobile phone connection is made again automatically so that
you can use a mobile phone call function.
1. You (A) need to be paired with a non-Sena Bluetooth headset
(B) and another SC1 headset (C) for the three-way
conference intercom.
Pairing
(B)
(A)
2. Start an intercom conversation with non-Sena Bluetooth headset
(B) in your intercom group. For example, you (A) may start an
intercom conversation with non-Sena Bluetooth headset (B).
The non-Sena Bluetooth headset (B) may also start an
intercom call with you (A).
(A)
(B)
3. The other SC1 (C) may join the intercom by making an
intercom call to you (A).
Pairing
(A)
(C)
(B)
26
(C)
(C)
SC1
4. Now you (A), non-Sena Bluetooth headset (B), and the other SC1
(A)
(B)
(C)
5. You may disconnect three-way Universal Intercom by
pressing and holding the (-) Button for 3 seconds.
11.4 Four-way Universal Intercom
You may make a four-way Universal Intercom connection with a couple of
different configurations, 1) three SC1s and one non-Sena Bluetooth
headset or 2) two SC1s and two non-Sena Bluetooth headsets.
You may have a couple of other Four-way Universal Intercom
configurations, 1) your headset (A), a non-Sena Bluetooth headset
(B), another SC1 (C), and a non-Sena Bluetooth headset (D), 2) your
headset (A), a non-Sena Bluetooth headset (B), and two other SC1
headsets (C and D). You may make the four-way Universal Intercom
call the same way as a normal four-way intercom call.
27
English
(C) are having a three-way conference intercom.
SC1
11.4.1 Four-way Universal Intercom Case 1
Two SC1 headsets (A and C) and two non-Sena Bluetooth
headsets (B and D).
1. You (A) may start an intercom conversation with the nonSena Bluetooth headset (B).
(A)
3. The non-Sena Bluetooth headset (D) may join the conference
intercom by making an intercom call to the SC1 (C).
(A)
(C)
(C)
(B)
(B)
(D)
(D)
4. Now two SC1 headsets (A & C) and two non-Sena Bluetooth
headsets (B & D) are connected with the four-way Universal
Intercom.
2. The other SC1 (C) may join the intercom by making an
intercom call to you (A).
(A)
(A)
(C)
(B)
(B)
28
(C)
(D)
(D)
You may disconnect a four-way Universal Intercom using the
same way as you do in a normal four-way intercom. Please refer
to section 8.4.2, “Ending Four-way Intercom”.
SC1
11.4.2 Four-way Universal Intercom Case 2
(B). The procedure is the same as case 1 described in section 11.4.1.
English
Three SC1 headsets (A, C and D) and one non-Sena Bluetooth headset
12 FM RADIO
FM Radio is supported by SC1 ADVANCED only.
(A)
(B)
12.1 FM Radio On and Off
(C)
(D)
To turn on the FM radio, press the (-) Button for 5 seconds until you
hear a mid-toned double beep sound. You will then hear a voice
prompt, “FM on”. To turn off the FM radio, press the (-) Button for 5
seconds until you hear a voice prompt, “FM off”. When you power it
off, the SC1 will remember the last station frequency. When you
power it on, the last station frequency will be playing.
12.2 Preset Stations
You can listen to preset stations while listening to the FM radio.
Press the (+) Button for 3 seconds to go upward to your next
saved preset station.
29
SC1
Note:
1. You can save FM stations to presets before using FM radio. Connect the
SC1 to your PC and open the Sena Device Manager. It allows you to save up
to 10 FM station frequency presets on the SC1 settings menu. You may do
the same operation by using the Sena Smartphone App.
2. You can still answer an incoming phone call and intercom while listening
to the FM radio.
13 FUNCTION PRIORITY
The SC1 operates in the following order of priority:
(highest)
Intercom
Music sharing by Bluetooth stereo
12.3 Region Selection
You can select the proper FM frequency region from the Sena Device
Manager. With the region setting, you may optimize the seek function
to avoid unnecessary frequency ranges (factory default: worldwide).
30
Mobile phone
Region
Frequency Range
Step
Worldwide
76.0 ~ 108.0 MHz
± 100 kHz
Americas
87.5 ~ 107.9 MHz
± 200 kHz
Asia
87.5 ~ 108.0 MHz
± 100 kHz
Australia
87.5 ~ 107.9 MHz
± 200 kHz
Europe
87.5 ~ 108.0 MHz
± 100 kHz
Japan
76.0 ~ 95.0 MHz
± 100 kHz
music FM Radio
(lowest)
Bluetooth stereo music
A lower priority function is always interrupted by a higher priority
function. For example, stereo music is interrupted by intercom
call, and an intercom conversation is interrupted by an incoming
mobile phone call.
SC1
You can set the configuration of the SC1 by the voice menu instruction
described below.
1. To enter into voice configuration menu, press and hold the (+)
Button or the (-) Button for 10 seconds until the LED shows solid
blue and you hear high toned double beeps. You will also hear a
voice prompt, “Configuration menu”.
2. Tap the (+) Button to navigate between the menus. You will
hear voice prompts for each menu item as below.
3. You can enable/disable a feature or execute a command by
tapping the (-) Button.
4. If no button is pressed within 10 seconds, the SC1 will exit the
configuration and go back to stand-by mode.
5. If you want to exit the configuration immediately, tap the (+)
Button until you hear a voice prompt, “Exit configuration”,
and tap the (-) Button.
The voice prompt for each menu item is as below:
(1) Intercom pairing
(2) Phone pairing
(3) Second mobile phone pairing
(4) Phone selective pairing
(5) Media selective pairing
(6) Speed dial
(7) Audio Boost
(8) VOX phone
(9) VOX intercom
English
14 CONFIGURATION SETTING
(10) HD intercom
(11) Voice prompt
(12) RDS AF setting
(13) Noise control
(14) Delete all pairings
(15) Remote control pairing
(16) Universal intercom pairing
(17) Factory reset
(18) Exit configuration
31
SC1
Intercom pairing
Phone pairing
Voice Prompt
“Intercom pairing”
Second mobile phone pairing
Factory Default
N/A
Phone selective pairing
Media selective pairing
Speed dial
Audio Boost
VOX phone
Tap Tapping
14.1 Intercom Pairing
VOX intercom
To enter into intercom pairing mode, tap the (+) Button until you
hear a voice prompt, “Intercom pairing”. Then tap the (- )
Button to enter into intercom pairing mode. Once two headsets
are in intercom pairing mode, tap the (+) Button of any one of the
two headsets and soon the intercom connection will automatically
be established. The headset will exit from the configuration menu.
14.2 Mobile Phone Pairing
HD intercom
Voice prompt
Voice Prompt
“Phone pairing”
RDS AF setting
Factory Default
N/A
Noise control
Delete all pairings
Remote control pairing
Universal intercom pairing
Factory reset
Exit configuration
32
To go into mobile phone pairing mode, tap the (+) Button until you
hear the voice prompt, “Phone pairing”. Please refer to section
5.1, “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo
Device” for details on mobile phone pairing. If you tap the (+)
Button, you can exit from the phone pairing mode.
SC1
14.3 Second Mobile Phone Pairing
14.5 Media Selective Pairing
“Second mobile phone
pairing”
Factory Default
N/A
To go into second mobile phone pairing mode, tap the (+) Button
until you hear the voice prompt, “Second mobile phone
pairing”. Please refer to section 5.2, “Second Mobile Phone
Pairing - Second Mobile Phone, GPS, and SR10” for details on
second mobile phone pairing. If you tap the (+) Button, you can
exit from the second mobile phone pairing mode.
14.4 Phone selective pairing
Voice Prompt
“Phone selective pairing”
Factory Default
N/A
To go into phone selective pairing mode, tap the (+) Button until
you hear the voice prompt, “Phone selective pairing”. Please
refer to section 5.3.2, “HFP for Phone Call Only” for details on
phone selective pairing. If you tap the (+) Button, you can exit
from the phone selective pairing mode.
Voice Prompt
“Media selective pairing”
Factory Default
N/A
gl
is
Voice Prompt
To go into media selective pairing mode, tap the (+) Button until
you hear the voice prompt, “Media selective pairing”. Please
refer section 5.3.1, “A2DP Stereo Music Only” for details on
media selective pairing. If you tap the (+) Button, you can exit
from the media selective pairing mode.
14.6 Assigning Speed Dial
Voice Prompt
“Speed dial”
Factory Default
N/A
Execute
Tap the (-) Button
1. To assign a phone number as a speed dial, tap the (+) Button
until you hear a voice prompt, “Speed dial”.
2. Tap the (-) Button, and you will hear a voice prompt, “Speed
dial one” and “Phone connected”.
3. Tap the (+) Button to select one of three speed dial numbers
and you hear a voice prompt, “Speed dial (#)”.
33
SC1
4. Call a phone number you want to assign and you will hear a
voice prompt, “Save speed dial (#)”. The phone number is
automatically assigned to the selected speed dial number.
Then the phone call will hang up before being connected.
5. To exit the menu, tap the (+) Button until you hear a voice prompt,
“Cancel”, and tap the (-) Button to confirm. You will then hear
a voice prompt, “Cancel”. If no button is pressed within 1
minute, the SC1 will exit the configuration menu and go back
to stand-by mode.
Note:
1. After assigning a phone number to one of three speed dials, you can
continually assign another phone number to the rest of two speed dials.
14.7 Enabling/Disabling Audio Boost
Voice Prompt
“Audio boost”
Factory Default
Disable
Enable/Disable
Tap the (-) Button
Enabling Audio Boost increases the overall maximum volume.
Disabling Audio Boost reduces the overall maximum volume, but
delivers more balanced sound.
14.8 Enabling/Disabling
Phone Answering
Voice
Activated
Voice Prompt
“VOX phone”
Device Manager software or the Sena Smartphone App. Please visit the
Factory Default
Enable
Sena Bluetooth website at www.sena.com for more information.
Enable/Disable
Tap the (-) Button
2. You can also assign phone numbers for speed dialing by using the Sena
If this feature is enabled, you can answer incoming calls by voice.
When you hear a ringtone for an incoming call, you can answer the
phone by saying a word such as “Hello” loudly or by blowing air into
the microphone. VOX phone is temporarily disabled if you are
connected to intercom. If this feature is disabled, you have to tap the
(+) Button to answer an incoming call.
34
SC1
14.9 Enabling/Disabling Voice Activated Intercom
14.10 Enabling/Disabling HD Intercom
“VOX intercom”
Voice Prompt
“HD intercom”
Disable
Factory Default
Enable
Enable/Disable
Tap the (-) Button
Enable/Disable
Tap the (-) Button
If this feature is enabled, you can initiate an intercom conversation
with the last connected intercom friend by voice. When you want to
start intercom, say a word such as “Hello” loudly or blow air into the
microphone. If you start an intercom conversation by voice, the
intercom terminates automatically when you and your intercom friend
remain silent for 20 seconds. However, if you manually start an
intercom conversation by tapping the (-) Button within the intercom
menu, you have to terminate the intercom conversation manually.
English
Voice Prompt
Factory Default
HD Intercom enhances the two-way intercom audio from normal
quality to HD quality. HD Intercom will become temporarily disabled
when you enter into a multi -way intercom. If this feature is disabled,
the two-way intercom audio will change to normal quality.
Note:
The intercom distance of HD Intercom is relatively shorter than that of
normal intercom.
However, if you start intercom by voice and end it manually by pressing
and holding the (-) Button for 3 seconds, you will not be able to start
intercom by voice temporarily. In this case, you have to tap the (-) Button
within the intercom menu to restart the intercom. This is to prevent
repeated unintentional intercom connections by strong wind noise. After
rebooting the SC1, you can start intercom by voice again.
35
SC1
14.11 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Voice Prompt
“Noise control”
Factory Default
Enable
Factory Default
Enable
Enable/Disable
Tap the (-) Button
Enable/Disable
Tap the (-) Button
You can disable voice prompts by configuration setting, but the
following voice prompts are always on.
–– Voice prompts for configuration setting menu
–– Voice prompts for battery level
indicator –– Voice prompts for speed dial
When Advanced Noise Control is enabled, the background noise
is reduced during an intercom conversation. When it is disabled,
the background noise is mixed with your voice during intercom.
Note:
If you use your SC1 with the Bluetooth Audio Pack for GoPro, you can enable
or disable this feature only during Normal Audio Recording Mode. This feature
–– Voice prompts for FM radio functions
is automatically disabled while in Ultra HD (UHD) Audio Mode.
14.12 Enabling/Disabling RDS AF
Voice Prompt
“RDS AF setting”
Factory Default
Disable
Enable/Disable
Tap the (-) Button
RDS AF allows a receiver to re-tune to the second frequency location
when the first signal becomes too weak. With RDS AF enabled on the
receiver, a radio station with more than one frequency can be used.
36
14.13 Enabling/Disabling Advanced Noise Control™
14.14 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default
N/A
Execute
Tap the (-) Button
To delete all Bluetooth pairing information of the SC1, tap the (+)
Button until you hear a voice prompt, “Delete all pairings”, and
tap the (-) Button to confirm.
SC1
14.15 Remote Control Pairing
14.17 Factory Reset
“Remote control pairing”
Voice Prompt
“Factory reset”
N/A
Factory Default
N/A
Execute
Tap the (-) Button
Execute
Tap the (-) Button
English
Voice Prompt
Factory Default
To enter into Remote Control Pairing mode, tap the (+) Button
until you hear a voice prompt, “Remote control pairing”. Then
tap the (-) Button to enter into Remote Control Pairing mode. The
headset will automatically exit from the configuration menu.
To restore factory default settings on the SC1, tap the (+) Button
until you hear a voice prompt, “Factory reset” , and tap the (-)
Button to confirm. The SC1 powers off with a voice prompt,
“Headset reset, goodbye”.
14.16 Universal Intercom Pairing
14.18 Exit Voice Configuration Menu
Voice Prompt
“Universal intercom pairing”
Voice Prompt
“Exit configuration”
Factory Default
N/A
Factory Default
N/A
Execute
Tap the (-) Button
Execute
Tap the (-) Button
To enter into Universal Intercom Pairing mode, tap the (+) Button until
you hear a voice prompt, “Universal intercom pairing”. Then tap
the (-) Button to enter into Universal Intercom Pairing mode. The
headset will automatically exit from the configuration menu.
To exit voice configuration menu and get back to stand-by mode,
tap the (+) Button until you hear a voice prompt, “Exit
configuration”, and tap the (-) Button to confirm.
37
SC1
38
Tap (+) Button
Tap (-) Button
Tap (+) Button
Tap (-) Button
Intercom Paring
Execute
Remote Control Pairing
Execute
Phone Pairing
None
Universal Intercom Pairing
Execute
Second Mobile Phone Pairing
None
Factory Reset
Execute
Phone Selective Pairing
None
Exit Configuration
Execute
Media Selective Pairing
None
Speed Dial
Execute
Audio Boost
Enable/Disable
VOX Phone
Enable/Disable
VOX Intercom
Enable/Disable
HD Intercom
Enable/Disable
Voice Prompt
Enable/Disable
RDS AF Setting
Enable/Disable
Advanced Noise Control
Enable/Disable
Delete All Pairings
Execute
Voice Configuration Menu & Button Operations
SC1
You can remotely control the SC1 via Bluetooth using the
Remote Control (sold separately). This eliminates the need to
take off your hand for button operations. Your SC1 and the
Remote Control must be paired together before use.
1. Turn on the SC1 and the Remote Control.
16 FIRMWARE UPGRADE
English
15 REMOTE CONTROL
The SC1 supports firmware upgrades. You can update the firmware
using the Sena Device Manager (please refer to section 4.6.1, “Sena
Device Manager”). Please visit Sena Bluetooth website at oemsena.
com/oem-schuberth/ to check the latest software downloads.
2. Press the (+) Button or the (-) Button for 10 seconds to enter the
configuration menu. Tap the (+) Button until you hear a voice
prompt saying, “Remote control pairing”. Press the (-) Button to
enter into Remote Control Pairing mode and the red LED will
flash rapidly and you will hear multiple beeps. Please refer to
section 14.15, “Remote Control Pairing” for more details.
3. Enter Bluetooth pairing mode on your Remote Control. The SC1
will automatically perform pairing with the Remote Control in
pairing mode. You will hear a voice prompt, “Remote control
connected”, when they are successfully connected.
39
SC1
17 TROUBLESHOOTING
17.1 Intercom Failure
When you try to start an intercom conversation with an intercom
friend who is unavailable within range or already having a
conference intercom with other riders or a mobile phone call, you
will hear a low tone double beep signifying an intercom busy
signal. In this case, you have to try again later.
17.2 Intercom Reconnection
If your intercom friend goes out of range while having an intercom
conversation, you may hear static noise and eventually the
intercom will be disconnected. In this case, the SC1 automatically
tries to reconnect the intercom every 8 seconds and you will hear
high tone double beeps until the intercom is reestablished. If you
do not want to make a reconnection, press and hold the (-) Button
for 1 second to stop the attempt.
40
17.3 Factory Reset
If you want to restore the headset to factory default settings, use the
Factory Reset in the configuration menu. The headset
automatically restores the default settings and turns off. Please
refer to section 14.17, “Factory Reset” for more details.
SC1
Type
Function
Intercom pairing
Type
Function
Power on
Basic
Function
Button Command
Press the (+) Button and the
(-) Button for 1 second
LED
Solid blue
Press the (+) Button and the
Power off
(-) Button for 1 second
Ascending
beeps
Answer mobile
phone call
Tap the (+) Button
Phone
End mobile phone
call
Press the (+) Button for
2 seconds
Speed dial
Press the (+) Button for
5 seconds
Reject incoming
Press the (+) Button for
call
2 seconds
Tap the (-) Button
Mid-tone
double beeps
Press the (-) Button for
3 seconds
Mid-tone
double beeps
Press the (-) Button for
1 second
Press the (-) Button for
1 second
Blue and red
flashing
End Group
Intercom
Press the (-) Button for
3 seconds
Play/Pause
Bluetooth music
Press the (+) Button for
1 second
Mid-tone
double beeps
Start Group
Intercom
Mid-tone
single beep
Mid-tone
single beep
Press the (+) Button for
3 seconds
Red flashing
End all intercoms
Press the (-) Button for
1 second
Start/End each
intercom
Intercom
Voice dial
Beep
Tap the (+) Button of any one of the two headsets
beeps
Tap the (+) Button or the (-)
Volume adjustment
Button
Mobile
Tap the (+) Button
LED
Beep
Descending
Solid red
Button Command
Press the (-) Button for
1 second
English
18 QUICK OPERATION REFERENCE
Music
Track forward/back
Press the (+) Button or the (-)
Button for 2 seconds
41
SC1
Type
FM Radio
Function
LED
Beep
FM radio on/off
Press the (-) Button for
5 seconds
Mid-tone
double beeps
Select preset
Press the (+) Button for
3 seconds
Mid-tone
single beep
Seek up
Button Command
Press the (+) Button for
1 second
High tone
triple beeps
CERTIFICATION AND SAFETY APPROVALS
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment on and
off, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antennae
• Increase the separation between the equipment and the receiver
42
SC1
• Consult the dealer or an experienced radio/TV technician for help
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. The
antenna used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures.
FCC Caution
Any changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void
user’s authority to operate the equipment.
CE Declaration of Conformity
This product is CE marked according to the provisions of the R&TTE
Directive (1999/5/EC). Hereby, Sena declares that this product is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. For further information, please
consult www.sena.com. Please note that this product uses radio
frequency bands not harmonized within EU. Within the EU this
product is intended to be used in Austria, Belgium, Denmark, Finland,
France, Germany, Greece, Ireland, Italy, Luxembourg, The
Netherlands, Portugal, Spain, Sweden, United Kingdom and within
EFTA in Iceland, Norway and Switzerland.
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
43
English
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
SC1
Bluetooth License
®
The Bluetooth
word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Sena is under license. Other
trademarks and trade names are those of their respective owners.
®
The product is compliant with and adopts the Bluetooth
Specification 4.1 and has successfully passed all interoperability
®
tests that are specified in the Bluetooth specification. However,
®
interoperability between the device and other Bluetooth -enabled
products is not guaranteed.
WEEE (Waste Electrical and Electronic Equipment)
The crossed-out wheel bin symbol on the product,
literature, or packaging reminds you that all electrical
and electronic products, batteries, and accumulators
must be taken to separate collection at the end of their
working life. This requirement applies to the European
Union and other locations where separate collection
systems are available. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
please do not dispose of these products as unsorted municipal
waste, but hand it in at an official collection point for recycling.
44
SAFETY INFORMATION
Please ensure that the product is properly used by observing the
warnings and cautions below to prevent any risk and/or damage
to property.
Product Storage and Management
• Keep the product free of dust. It may damage mechanical and
electronic parts of the product.
• Do not store the product in high temperatures as this may
reduce the life span of electronic devices, damage the battery,
and/or melt plastic parts of the product.
• Do not store the product in cold temperatures. Abrupt changes
in temperatures may cause condensation and damage
electronic circuits.
• Do not clean the product with cleaning solvents, toxic chemicals, or
strong detergents as this may damage the product.
• Do not paint the product. Paint may obstruct moving parts or
interfere with the normal operation of the product.
• Do not drop or otherwise shock the product. It may damage the
product or its internal electronic circuits.
• Do not disassemble, repair or modify the product as this may
damage the product and invalidate the product warranty.
• Do not store the product in humid environments, especially for
long time storage.
SC1
Product Use
• In any place where wireless communication is prohibited, such as
hospitals or airplanes, turn off the power and refrain from using the
product. In a place where wireless communication is prohibited,
electromagnetic waves may cause hazards or accidents.
• Do not use the product near hazardous explosives. When it is
near any explosion hazards, turn off the power and heed any
regulations, instructions, and signs in the area.
Battery
This product has an irreplaceable rechargeable battery inside.
Therefore, when using the product, make sure to adhere to the
following:
• Never separate the battery from the product as this may
damage the product.
• The battery performance may be reduced over time with usage.
• In recharging the battery, make sure to use an approved
charger provided by the manufacturer. Use of a non-approved
charger may cause fire, explosion, leakage, and other hazards
may also reduce the life time or performance of the battery.
45
English
• In some regions, it is prohibited by law to ride motorcycles while
wearing headsets or earbuds. Therefore be certain to comply
with all relevant laws in the region before using the product.
• The headset is for motorcycle helmets only. To install the
headset, you must follow the installation instructions shown in
the User’s Guide.
• Use of the product at a high volume for a long period of time
may damage your eardrums or hearing ability. Keep the volume
at a modest level to prevent damage.
• Do not cause impact to the product or touch it with sharp tools
as this may damage the product.
• Do not use the product in high-temperatures or apply heat to
the product as this may cause damage, explosion, or fire.
• Keep product away from pets or small children. It may damage
the product.
• When using the product, be certain to conform to laws
regarding the use of communications devices while riding.
• Do not put the product where it may hamper the rider’s vision or
manipulate it while riding. This may cause traffic accidents.
• Before riding, fasten the product to the helmet, and doublecheck that it is fastened. Separation of the product while riding
may cause damage to the product or accidents.
• If the product is damaged, stop using it immediately. It may
cause damage, explosion, or fire.
SC1
• Any 3rd party USB charger can be used with Sena products if
the charger is approved by either the FCC, CE, IC or other
locally approved agencies that Sena accepts.
• Do not use cigarette chargers other than the included cigarette
charger to charge the headset.
• Store the battery at temperatures of 15°C~25°C (59°F~77°F).
Higher or lower temperatures may reduce the capacity and life
of the battery, or may cause temporary non-operation. Do not
use the product in sub-zero temperature, because it may cause
serious reduction of the battery performance.
• If you apply heat to the batter y or throw it into fire, it may explode.
• Do not use the product with a damaged battery. It may explode
and/ or cause accidents.
• Never use a damaged charger. It may explode and/or cause
accidents.
• Battery life may vary depending on conditions, environmental
factors, functions of the product in use, and devices used with it.
PRODUCT WARRANTY AND DISCLAIMER
Limited Warranty
Limited Warranty
Schuberth guarantees the product quality based on the technical
specification stated in the product manual, and data regarding
product warranty. Here, product warranty extends to the product only.
Schuberth will not be liable for any loss, damage of human life, or
loss of property which may result from using the product beyond
defective parts or flaws that occur due to problems in manufacture.
Warranty Period
Schuberth guarantees free-of-charge replacements of defective parts
of the product or flaws that may have occurred due to problems in
manufacture for a period of 2 years from the date of initial purchase.
Termination
Quality warranty of the product becomes effective on the date of
initial purchase. In addition, the quality warranty of the product
expires when the warranty period expires. However, in the
following cases, the warranty will be terminated prematurely.
• In the event the product has been sold or transferred to a third party.
• In the event the manufacturer’s name, serial number, product
label, or other markings have been modified or removed.
46
SC1
Notice and Waiver
By buying and using this product, you relinquish considerable
legal rights including any claim for compensation for damages.
Therefore, be certain to read and understand the following terms
and conditions before using the product. Use of this product will
constitute consent to this agreement, and forfeiture of rights to all
claims. If you do not consent to all the terms and conditions of
this agreement, return the product for a refund.
1. You agree that you, your descendants, legal proxies,
successors, or transferees will not raise permanent volitional
request for any suit, claim, implementation, redemption or
similar action from Schuberth and Sena Technologies, Inc
("Sena") with regard to any occasion such as difficulty, pain,
suffering, inconvenience, loss, injury, or death which may
occur to you or a third party during the use of this product.
2. You must completely understand and accept all risks (including
those occurring due to any careless behavior of yours or others)
which may occur during the use of this product.
3. You are responsible for ensuring that your medical condition
permits usage of the product and that you are in sufficient
physical condition for using any device which can be used
with it. In addition, you must ensure that the product does not
limit your abilities and that you are able to use it safely.
4. You must be an adult who can take responsibilities for using
the product.
5. You must read and understand the following warnings and alerts:
• Schuberth and Sena together with employees, managers,
partners, subsidiaries, representatives, agents, supporting
firms and suppliers, sole sellers of Schuberth and Sena
(collectively referred to as “the company”) recommend that,
before using the product and similar devices of any brands
including its derivative models, you collect any relevant
information in advance and be entirely prepared in terms of
weather, traffic situation, and road conditions.
• When you use the product while you operating any vehicle
or equipment such as motorcycles, scooters, mopeds, ATVs,
or quad-bikes (hereinafter called as “transportation means”),
you must take complete caution regardless of the location of
such operation.
• Use of the product on the road may cause such risks as
fracture, serious disability, or death.
47
English
• In the event any unauthorized person has tried to disassemble,
repair, or modify the product.
SC1
• Risk factors, which may occur when you use the product,
may be due to errors of the manufacturer, its agents, or third
parties which are involved in the manufacturing.
• Risk factors, which may occur when you use the product,
may be unforeseeable. Therefore, you must take full
responsibility for any damage or loss caused by all risk
factors which may occur when using the product.
• When you use the product, use good judgment; never use it
under the influence of alcohol.
6. You must read and completely understand all terms and
conditions of legal rights and warnings that are involved in using
the product. In addition, usage of the product constitutes
acceptance of all terms and conditions regarding waiver of rights.
Warranty Exclusions
Reasons for Limited Liabilities
If you do not return the product after purchasing it, you relinquish all
rights to liabilities, loss, claims, and claims for reimbursement of
expenses (including attorney’s fees). Therefore, Schuberth will not be
liable for physical injury, death, or any loss or damage of
transportation means, possessions, or assets which belong to you or
third parties that may have occurred while you use the product.
Further, Schuberth will not be liable for any substantial damage not
related to the condition, environment, or malfunction of the product.
All risks related with the operation of the product depend entirely on
the user regardless of its use by the initial purchaser of a third party.
Use of this product may violate local or national laws. In addition,
be aware once again that correct and safe use of the product is
entirely your responsibility.
48
SC1
Liabilities Disclaimer
TO THE FULL EXTENT ALLOWED BY LAW, SCHUBERTH EXCLUDES
FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED
In addition to damages which may occur due to the use of the
product, Schuberth will not be liable for damages of the product
which occur due to the following events.
IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR
INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE
DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS,
LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE,
FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF
SCHUBERTH OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY
TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE
PAID, AT SCHUBERTH'S OPTION. THIS DISCLAIMER OF LIABILITY
FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE,
THE TOTAL COMPENSATION LIABILITIES OF SCHUBERTH OR ITS
SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE
PRODUCT BY THE PURCHASER.
• In the event the product is misused or used for purposes other
than its intended purposes.
• In the event the product is damaged because the user does not
follow the content of the product manual.
• In the event the product is damaged because it has been left
unattended or has undergone any other accident.
• In the event the product is damaged because the user has used
any parts or software which are not provided by the manufacturer.
• In the event the product is damaged because the user has
disassembled, repaired, or modified it in such way as is not
explained in the product manual.
• In the event the product is damaged by a third party.
• In the event the product is damaged due to Acts of God (including
fire, flood, earthquake, storm, hurricane or other natural disaster).
• In the event the surface of the product is damaged by use.
49
English
Limitation of Liability
SC1
Warranty Service
Take necessary measures to protect the product. In order to get a
refund or replacement, you must include the whole package as it
was purchased.
Free-of-charge Service
Schuberth will provide free-of -charge repair or replacement
service for the product when product defects occur within the
scope of the product warranty during the warranty period.
CERTIFICATION ET HOMOLOGATION EN
TERMES DE SÉ CURITÉ
Dé claration de conformité FCC
Cet appareil est en conformité avec la partie 15 de la réglementation
FCC. L’exploitation est autorisée aux deux conditions suivantes :
(1) Cet appareil ne doit pas créer d’interférences préjudiciables et
(2) Cet appareil doit accepter toutes les interférences reçues, y
compris celles qui pourraient entraver son bon fonctionnement.
Ce matériel a été testé et déclaré en conformité avec les limites d’un
appareil numérique de Classe B, suivant la partie 15 de la réglementation
• Réorienter ou repositionner l'antenne réceptrice.
Français
To obtain product warranty service, send the defective product, at
your expense, to the manufacturer or the seller along with proof of
purchase (a receipt that shows the purchase date, a product
registration certificate of the Website, and other relevant information).
FCC. Ces limites sont destinées à assurer une protection raisonnable
contre les interférences préjudiciables dans un environnement résidentiel.
Ce matériel génère, utilise et peut dégager de l’énergie en radio
fréquence et, s’il n’est pas installé et utilisé en conformité avec les
instructions, peut provoquer des interférences préjudiciables avec les
communications radio. Cependant, il n’y a aucune garantie que des
interférences ne se produiront pas dans des installations particulières. Si
ce matériel provoque des interférences préjudiciables à une réception
radio ou TV, ce qui peut être déterminé en allumant puis en éteignant
l’appareil, il est vivement recommandé à l’utilisateur d’essayer de mettre
un terme à ces interférences en prenant l’une des mesures suivantes :
65
SC1
• Augmenter la séparation entre le matériel et le récepteur
• Connecter le matériel à une sortie sur un circuit différent de celui
sur lequel le récepteur est connecté.
• Contacter le revendeur ou un technicien radio/TV expérimenté pour
une assistance.
Énoncé FCC sur l’exposition aux radiations RF
Cet équipement est conforme aux réglementations FCC d’exposition
aux radiations définies pour un environnement non contrôlé. Les
utilisateurs suivront les instructions d’exploitation spécifiques pour
répondre aux exigences de conformité sur l’exposition aux RF.
L’antenne utilisée pour cet appareil ne doit pas fonctionner en même
temps qu’une autre antenne ou émetteur, sauf s'il y a conformité
avec les procédures FCC des produits multi-émetteurs.
Pré cautions FCC
Tout changement ou modification apporté au matériel qui n’aurait pas
été approuvé par le responsable de la conformité pourrait invalider le
droit de l’utilisateur à faire fonctionner ce matériel.
Dé claration de conformité CE
Ce produit porte un marquage CE, conformément aux dispositions de
la directive R&TTE (1999/5/CE). Sena déclare par la présente que ce
produit est conforme aux exigences principales et autres dispositions
correspondantes de la directive 1999/5/CE. Pour plus d’informations,
66
veuillez consulter le site www.sena.com/fr. Veuillez noter que ce produit
utilise des bandes de radio fréquence non uniformisées au sein de l’Union
Européenne. Au sein de l’Union Européenne, ce produit est destiné à être
utilisé en Autriche, Belgique, Danemark, Finlande, France, Allemagne,
Grèce, Irlande, Italie, Luxembourg, Pays-Bas, Portugal, Espagne, Suède
et Royaume-Uni et au sein de l’AELE, en Islande, Norvège et Suisse.
Dé claration de conformité IC (Industrie Canada)
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) Cet appareil ne doit pas créer d'interférences.
(2) L'utilisateur de l'appareil doit accepter tout brouillage radio
électrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Licence Bluetooth
®
La marque et les logos Bluetooth sont la propriété de Bluetooth SIG,
Inc et toute utilisation de ces marques par Sena s’effectue sous
licence. D’autres marques et appellations commerciales sont celles
de leurs propriétaires respectifs.
®
Le produit est conforme à et suit la spécification Bluetooth 4.1 et a
réussi tous les tests d’interopérabilité mentionnés dans la
®
spécification Bluetooth . Cependant, l’interopérabilité entre l’appareil
®
et d’autres produits Bluetooth n’est pas garantie.
SC1
WEEE (DEEE : Dé chets d'é quipements
é lectriques et é lectroniques)
aussi aux autres pays où des systèmes de récupération et de
recyclage séparés existent. Pour prévenir toutes les conséquences
possibles pour l’environnement ou la santé d’une élimination de
déchets non contrôlée, veuillez ne pas considérer ces produits
comme des déchets ménagers, mais vous rendre dans une
structure de récupération officielle pour le recyclage.
Veuillez vous assurer que ce produit est utilisé de manière adéquate
et que les avertissements et précautions énumérés ci-dessous sont
respectés afin d’éviter tout risque et/ou dommage matériel.
Stockage du produit et manipulation
• Garder le produit à l’abri de la poussière. Cela pourrait
endommager les pièces mécaniques et électroniques du produit.
• Ne pas stocker le produit dans des zones où la température est
élevée, car cela pourrait réduire la durée de vie des composants
électroniques, endommager la batterie et/ou faire fondre les pièces
en plastique du produit.
• Ne pas stocker le produit dans des zones où la température est faible.
Des changements de températures brusques peuvent former de la
condensation et endommager les circuits électroniques.
• Ne pas nettoyer le produit avec des solvants de nettoyage, des
produits chimiques toxiques ou des détergents puissants, car cela
pourrait endommager le produit.
• Ne pas peindre le produit. La peinture pourrait obstruer les pièces
amovibles ou interférer avec le fonctionnement normal du produit.
• Ne pas laisser tomber ou cogner l’appareil. Cela pourrait
endommager le produit ou ses circuits électroniques internes.
• Ne pas démonter, réparer ou modifier le produit, car cela pourrait
endommager le produit et annuler sa garantie.
• Ne pas ranger le produit dans un environnement humide, notamment en
cas de stockage prolongé.
67
Français
Le symbole poubelle barrée figurant sur le produit, la
documentation ou l’emballage signifie que tous les
produits électriques et électroniques, les batteries et les
accumulateurs doivent être conduits en fin de vie dans
une structure de récupération et de recyclage séparée.
Cette exigence s’applique à l’Union Européenne mais
INFORMATIONS SUR LA SÉ CURITÉ
SC1
Utilisation du produit
• L’installation du produit sur le casque moto constitue une
modification du casque moto et peut annuler l’autorité de l’utilisateur
à utiliser le casque moto. Cela pourrait représenter un risque en cas
d’accident. Vous devez donc en être pleinement conscient avant
d’utiliser le produit. Si vous n’acceptez pas ce risque, vous pouvez
nous retourner le produit pour obtenir un remboursement intégral.
• Dans certaines régions, la loi interdit de conduire une moto en portant
un casque audio ou des écouteurs. Assurez-vous donc de respecter
toutes les lois en vigueur dans la région où vous utilisez le produit.
• Ce casque audio est réservé uniquement aux casques moto. Pour
installer le casque audio, vous devez suivre les instructions
d’installation indiquées dans le Manuel d’utilisation.
• L’utilisation du produit à volume élevé pendant une période prolongée
peut endommager les tympans ou la capacité auditive. Garder le
volume sonore à un niveau modéré pour prévenir tout dommage.
• Ne pas heurter le produit ou le toucher avec des outils tranchants,
car cela pourrait l’endommager.
• Ne pas utiliser le produit dans des zones chaudes ou chauffer le
produit, car cela pourrait occasionner des dommages ou provoquer
une explosion ou un incendie.
• Tenir le produit hors de portée des animaux ou jeunes enfants. Cela
pourrait endommager le produit.
• É teindre et ne pas utiliser le produit dans les endroits où les communications
sans fil sont interdites comme les hôpitaux ou les avions.
68
Les ondes électromagnétiques peuvent entraîner des risques ou
des accidents dans ces endroits.
• Ne pas utiliser le produit près d’explosifs. En cas de risques
d’explosion à proximité, éteindre le produit et respecter toute
réglementation, instruction ou panneau présent dans la zone.
• Pendant l’utilisation du produit, s’assurer de respecter les lois concernant
l’utilisation des appareils de communication lors de la conduite.
• Ne pas mettre le produit à un endroit où il pourrait entraver le
champ de vision du motocycliste et ne pas le manipuler durant la
conduite. Cela pourrait causer des accidents de la route.
• Avant de prendre la route, attacher le produit au casque moto et
s’assurer qu’il est bien fixé. Le retrait du produit durant la conduite
peut provoquer des dommages au produit ou des accidents.
• 10U pour Schuberth C3/C3 Pro est compatible avec les casques
moto Schuberth E1 et Touratech Aventuro Mod et existe dans les
tailles M, L, XL, XXL.
• Si le produit est endommagé, arrêter immédiatement de l’utiliser. Cela
pourrait entraîner des dommages, une explosion ou un incendie.
Batterie
Ce produit contient une batterie rechargeable irremplaçable à
l’intérieur. S’assurer par conséquent lors de l’utilisation du produit de
respecter ce qui suit :
• Ne jamais séparer la batterie du produit car cela pourrait
endommager le produit.
• Les performances de la batterie peuvent s’altérer au fur à et mesure de
SC1
son utilisation.
• Lors de la mise en charge de la batterie, s’assurer d’utiliser un chargeur
agréé fourni par le fabricant. L’utilisation d’un chargeur non agréé peut
entraîner un incendie, une explosion, une fuite et d’autres risques et peut
également réduire la durée de vie ou les performances de la batterie.
RESPONSABILITÉ
Garantie limité e
Garantie limitée
Sena Technologies, Inc. (« Sena ») garantit la qualité du produit sur la
base des caractéristiques techniques énoncées dans le manuel du
produit et les données concernant la garantie du produit. La garantie du
produit s’étend ici seulement au produit. Sena n’est pas responsable des
pertes, blessures aux personnes ou pertes de propriétés qui pourraient
résulter de l’utilisation du produit en dehors des pièces défectueuses ou
des défauts survenant en raison de problèmes lors de la fabrication.
Période de garantie
Sena garantit le remplacement sans frais des pièces défectueuses
du produit ou des défauts ayant pu survenir en raison de problèmes
lors de la fabrication pour une période de deux ans à compter de la
date d’achat initiale.
FIN DE LA GARANTIE
La garantie de qualité du produit prend effet le jour de l’achat initial. De plus, la
garantie de qualité du produit expire lorsque la période de garantie expire.
Dans les cas suivants toutefois, la garantie prendra fin avant terme.
• Dans le cas où le produit a été vendu ou transféré à un tiers.
69
Français
• Un chargeur USB tiers peut être utilisé avec les produits Sena à
condition d’être aux normes FCC, CE ou IC ou d’être agréés par
d’autres organismes locaux que Sena accepte.
• Ne pas utiliser d’autres chargeurs allume-cigare que le chargeur
allume-cigare inclus pour charger le casque audio.
• Stocker la batterie à des températures comprises entre 15 °C et
25 °C. Des températures inférieures ou supérieures à celles
préconisées peuvent réduire la durée de vie de la batterie ou
entraîner des dysfonctionnements temporaires. Ne pas utiliser ce
produit à des températures inférieures à zéro, car cela pourrait
réduire de manière drastique les performances de la batterie.
• Ne pas chauffer la batterie ou la jeter au feu, car cela pourrait
provoquer son explosion.
• Ne pas utiliser le produit avec une batterie endommagée. Il pourrait
exploser et/ou causer des accidents.
• Ne pas utiliser un chargeur endommagé. Il pourrait exploser et/ou
causer des accidents.
• La durée de vie de la batterie dépend des conditions d’utilisation,
des facteurs environnementaux, des fonctions du produit en cours
d’utilisation et des appareils utilisés conjointement.
GARANTIE DU PRODUIT ET AVIS DE NON-
SC1
• Dans le cas où le nom, le numéro de série, l'étiquette du produit ou
d'autres marquages du fabricant ont été modifiés ou supprimés.
• Dans le cas où une personne non autorisée a tenté de démonter,
réparer ou modifier le produit.
Avis et renonciation
En achetant et en utilisant ce produit, vous renoncez à des droits légaux
importants y compris les demandes d’indemnisation pour dommages.
En conséquence, assurez-vous de lire et de comprendre les conditions
suivantes avant d’utiliser le produit. L’utilisation de ce produit constitue un
consentement au présent accord et un renoncement aux droits à toute
indemnisation. Si vous ne consentez pas à toutes les conditions du
présent accord, renvoyez le produit pour un remboursement.
1. Vous convenez que vous, vos descendants, représentants légaux,
héritiers, ou cessionnaires ne ferez de votre propre gré et, de manière
permanente, de demande de procès, d’indemnisation, d’exécution, de
rachat ou toute action similaire à l’encontre de Sena concernant toute
occasion comme la difficulté, la douleur, la souffrance, le désagrément,
la perte, la blessure ou le décès qui se produirait à votre encontre ou à
un tiers durant l’utilisation de ce produit.
2. Vous devez parfaitement comprendre et accepter tous les risques
(y compris ceux se produisant en raison de votre négligence ou
d’autres) pouvant survenir durant l’utilisation de ce produit.
70
3. Vous avez la responsabilité de vous assurer que votre condition médicale
permet l’utilisation du produit et que votre condition physique est suffisante
pour utiliser tout appareil pouvant être utilisé conjointement. De plus, vous
devez vous assurer que le produit ne limite pas vos capacités et que vous
êtes en mesure de l’utiliser en toute sécurité.
4. Vous devez être majeur et porter la responsabilité de l’utilisation du
produit.
5. Vous devez lire et comprendre les avertissements et les alertes suivantes :
• Sena, en collaboration avec les employés, responsables, partenaires,
filiales, représentants, agents, entreprises et fournisseurs impliqués,
seuls vendeurs de Sena (collectivement désignés comme «
l’entreprise ») vous recommandent, avant d’utiliser le produit et des
appareils similaires de différentes marques y compris leurs modèles
dérivés, de recueillir à l’avance toutes les informations pertinentes et
d’être entièrement préparé quant aux conditions météorologiques et
routières ainsi qu’à l’état de la circulation.
• Si vous utilisez le produit tout en conduisant un véhicule tel que des
motos, scooters, cyclomoteurs, quatre-quatre ou quads (ci-après
dénommés « moyens de transport »), vous devez faire preuve de la
plus grande prudence quel que soit l’endroit d’utilisation.
• L'utilisation du produit sur la route peut entraîner des risques de
fractures, d'invalidité grave ou de décès.
SC1
• Les facteurs de risque, pouvant survenir lorsque vous utilisez le
produit, peuvent résulter d'erreurs du fabricant, de ses agents ou
de tiers impliqués dans la fabrication.
• Lorsque vous utilisez le produit, faites preuve de discernement ;
ne l'utilisez jamais sous l'emprise de l'alcool.
6. Vous devez lire et comprendre intégralement toutes les conditions
se rapportant aux droits légaux et aux avertissements qu’implique
l'utilisation du produit. L’utilisation du produit constitue en outre une
acceptation de l’ensemble des conditions concernant la
renonciation des droits.
L’utilisation de ce produit peut être contraire aux lois locales et
nationales. De plus, soyez bien conscient que l’utilisation adéquate et
sans danger de ce produit relève de votre entière responsabilité.
Limitation de responsabilité
DANS LES LIMITES PERMISES PAR LA LOI, SENA EXCLUT POUR
ELLE-MÊ ME ET SES FOURNISSEURS TOUTE RESPONSABILITÉ
Exclusions de garantie
CONTRACTUELLE OU DÉ LICTUELLE (Y COMPRIS UNE NÉ GLIGENCE)
DE TOUT DOMMAGE DIRECT, CONSÉ CUTIF, INDIRECT OU PUNITIF DE
QUELQUE NATURE QUE CE SOIT, OU POUR LA PERTE DE REVENUS
OU DE PROFITS, PERTES COMMERCIALES, PERTES D’INFORMATIONS
OU DE DONNÉ ES OU TOUTE AUTRE PERTE FINANCIÈ RE RÉ SULTANT
Raisons des limitations de responsabilité
DE OU EN RELATION À LA VENTE, L’INSTALLATION, L’ENTRETIEN,
Si vous ne renvoyez pas le produit après l'avoir acheté, vous renoncez
à tous les droits de responsabilité, de pertes, de réclamations et
d'indemnisations pour le remboursement des dépenses (y compris les
honoraires d'avocat). Par conséquent, Sena n’est pas responsable des
blessures physiques, décès ou pertes ou dommages des moyens de
transport, possessions ou actifs vous appartenant ou appartenant à des
tiers ayant pu se produire lors de votre utilisation du produit. D’autre part,
Sena n’est pas responsable des dommages substantiels qui ne sont pas
L’UTILISATION, LA PERFORMANCE, LA PANNE OU L’INTERRUPTION DE
SES PRODUITS, MÊ ME SI SENA OU SES REVENDEURS AUTORISÉ S ONT
ÉTÉ AVERTIS DE L’ÉVENTUALITÉ DE TELS DOMMAGES, ET LIMITE SA
RESPONSABILITÉ À RÉ PARER, REMPLACER OU REMBOURSER LE PRIX
D’ACHAT PAYÉ, AU CHOIX DE SENA. CET AVIS DE NON RESPONSABILITÉ
POUR LES DOMMAGES NE SERA PAS AFFECTÉ SI UN RECOURS
APPORTÉ PRÉSENTEMENT N’ATTEINT PAS SON BUT ESSENTIEL. DANS
71
Français
• Les facteurs de risque pouvant survenir lorsque vous utilisez le produit,
peuvent être imprévisibles. Vous devez par conséquent porter l’entière
responsabilité pour tout dommage ou perte causée par l’ensemble des
facteurs de risque pouvant survenir lors de l’utilisation du produit.
liés à l’état, à l’environnement ou au dysfonctionnement du produit.
Tous les risques associés à l’utilisation du produit dépendent
entièrement de l’utilisateur, quelle que soit son utilisation par
l’acheteur d’origine ou d’un tiers.
SC1
TOUS LES CAS, LES RESPONSABILITÉS D’INDEMNISATIONS TOTALES
DE SENA OU DE SES AGENTS DE VENTE NE PEUVENT DÉ PASSER LE
PRIX PAYÉ POUR LE PRODUIT PAR L’ACHETEUR.
Exonération de responsabilités
Outre les dommages pouvant survenir en raison de l’utilisation du
produit, Sena n’est pas tenu responsable des dommages du produit
survenant en raison des situations suivantes.
• Dans le cas où il est fait mauvais usage du produit ou qu'il est utilisé
dans un but autre que celui prévu.
• Dans le cas où le produit est endommagé car l'utilisateur ne suit
pas le contenu du manuel du produit.
• Dans le cas où le produit est endommagé car il a été laissé sans
surveillance ou a subi un autre accident.
• Dans le cas où le produit est endommagé car l'utilisateur s'est servi
de pièces ou d'un logiciel n'étant pas fourni par le fabricant.
• Dans le cas où le produit est endommagé car l'utilisateur l'a
démonté, réparé ou modifié d'une manière ne figurant pas dans le
manuel du produit.
• Dans le cas où le produit est endommagé par un tiers.
• Dans le cas où le produit est endommagé en raison d'événements
imprévisibles (y compris les incendies, inondations, tremblements
de terre, tempêtes, ouragans et autres catastrophes naturelles).
• Dans le cas où la surface du produit est endommagée pour cause
d'usure.
Service de garantie
Pour faire valoir vos droits à un service de garantie du produit, envoyez le
produit défectueux, à vos frais, au fabricant ou revendeur accompagné de
la preuve d’achat (un reçu indiquant la date d’achat, le certificat
d’enregistrement du produit du site internet et d’autres informations
pertinentes). Prenez les mesures nécessaires pour protéger le produit.
Afin d’obtenir le remboursement ou le remplacement du produit, vous
devez inclure la totalité du paquet comme au moment de l’achat.
Service sans frais
Sena offre un service de réparation ou de remplacement sans frais
du produit lorsque les défauts de produit rentrent dans la limite de la
garantie du produit durant la période de garantie.
50
1.0.0
www.schuberth.com
User's Guide for Firmware v1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 61
Language                        : ko-KR
Tagged PDF                      : Yes
Author                          : i
Creator                         : Microsoft® Word 2010
Create Date                     : 2017:03:14 10:12:26+09:00
Modify Date                     : 2017:03:14 10:12:26+09:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools