SEOWON INTECH SWU-3120 WiMAX USB MODEM(Wave1) User Manual Microsoft PowerPoint SWU 3x00 usermanual ENG

SEOWON INTECH CO., LTD. WiMAX USB MODEM(Wave1) Microsoft PowerPoint SWU 3x00 usermanual ENG

Users manual

WiMax USB Modem/WCMSWU – 3120 User Guide
105655513228121314232425231. For your safety2. Before using Modem3. Basic usage3.1 Inspect Package Contents3.2 Parts Description3.3 How to use UICC4. Software Installation4.1 WCM Program Installation4.2 Verification5. How to use WCM5.1 Running WCM5.2 Display Window5.3 WiMAX Connection5.4 WiMAX disconnection5.5 WiMAX exit6. Product Specification7. Service Center
1Read this simple guideline. Ignoring guideline may cause device from working properly and causedamage to device.Do not use near BLASTINGFollow any restrictions. Do not use the device where blasting is in progress.Do not use in hospitals-Follow any restrictions. Switch the device off near medical equipmentDo not use in aircraft.Follow any restrictions. Wireless devices can cause interference in aircraft.InterferenceAll wireless devices may be susceptible to interference which could affect performance.ServiceDo not attempt to service this modem as you please. Refer all service to qualified service personnel.Water-resistance Your device is not water-resistant. Keep dry.1.For your safety
2Do not store the device in cold areasWhen the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.Do not leave the device in a closed car for a long timeWhen the temperature in a car reach over 80°C, it can damage your device permanently.Avoid severe impact.Do not bend or expose to impacts. Doing so may cause data loss.Do not forcibly connect the device to a USB port. Doing so may cause damage to the device.1.For your safetyDo not store the device in hot areasHigh temperature can warp or melt certain plastics and shorten the life of electronic devices.Read this simple guideline with reference to the previous page.
32.Before using ModemSystem RequirementsCPU & memory Pentium ⅣProcessor or faster, 128MB RAM or moreInterface USB 2.0Supported OS Windows /XP/Vista(32Bit)When internet is connected, don’t remove UICC. The modem & UICC may incur problems and not workproperly.Do not force the SIM into the SIM slot.Insert UICC correctly. If you insert it inversely, card slot may be damaged.
42.Before using modemMobile WiMAX Service ConceptAnytime, Anywhere and Even in Motion, High Transmission Speed Service EnabledComplementary Mobility of High-Speed Internet-Wireless LANCheaper than Mobile this device Wireless Internet (Low Investment Cost, High Transmission Capacity)Wireless
5USB Modem3.Basic UsageInstallation CD User ManualIndication LEDPower ON/OFF & Connection modeUSB ConnectorUICC Socket3.1 Inspect Package Contents 3.2 Parts Description
64. Driver InstallationIf you have previous WCM or Driver version, uninstall it first.Double Click [GdmSetup_WiBro_W2_v2.0_20080625]Plug USB Dongle into your USB port.
7Click “Install”4. Driver Installation
8Click [Continue Anyway] 4. Driver Installation
9Click [Continue Anyway] 4. Driver Installation
10Chick [Y] Button4. Driver Installation
114. Driver Installation
124. Driver InstallationClick [Finish] button. Restart your PC.
13Click [Next] button on ‘Found New Hardware Wizard’ screen 4. Driver Installation
16Click [Next] button to continue4. Driver Installation
17Click [Continue Anyway] button4. Driver Installation
18Click [Finish] button4. Driver Installation
17USB Dongle을 제거합니다.[gdmuimg.exe] 을 클릭하여 실행합니다. [Install]을 선택하여 실행합니다. 4. Driver Installation
18Confirm file replace화면에서 [Yes to All] 을 클릭합니다. 4. Driver Installation
194. Driver InstallationIf GCT Wibro USB Network Device is connected on Device Manager screen, it’s installed normally.VerificationPlug USB Dongle into your USB portRun WCM program
5. How to use WCMTo start WiMAX Connection manager , Select [WCM]5.1 Running WCM20
5. How to use WCM21After driver installation, the system detects the GCT WiBro modem on its attachment. The WCM is launched by running WCM.exe.If the Wibro modem is not attached, the WCM prints messages that it cannot find WiMaxdevice. (Figure 1)After WiBro modem is attached, the WCM detects the modem device successfully and performs initialization procedure. (Figure 2)Figure 1 Figure 2
5. How to use WCM22ConnectedThe WCM allows user to start network-entry by activating “Connect”button..Status : User can monitor the network status in more detail.SettingUser can configure the global operation of WiBro at the “Setting”menu of the WCM. .
5. How to use WCM23Mode(Use PKM) : Authentication mode is used.-PKM Type* EAP-AKA : S/W EAP-AKA without USIM card* EAP-AKA(Use USIM) : EAP-AKA using USIM* EAP-MD5 : Use EAP-MD5* EAP-TTLS(MSCHAPV2) : Use MSCHAPV2Auto Connection : WCM initiates network entry automaticallyManual Connection : Network entry is controlled manuallyAll settings becomes effective after “Save”button is pressed.5.2 Setting
5. How to use WCM24TX Power : User can control TX Power.FA Sel : User can select Frequency.PER Reset : User can reset PERSleep Interval : User can adjust sleep intervalIdle Interval : User can adjust idle Interval5.3 Debug Screen
6. Product Specification31Air InterfaceFrequency BandFrequency AccuracySizeWeightOperating Temperaturerelative humidityIEEE 802.16e 2.50 GHz±100 Hz 19 g- 10 degree ~ + 50 degree0 % ~ 85 %54(W) x 31(H) x 15.5(D) mmOutput Power MAX 200 mW (23 dBm)
Product AS 0000-0000Customer complaint 000 00000this device number 000Please inform us product model name and problem status when you inquire.Value-added Service and telethis device bill etcA/S field Operator field7. Service Center 32
Model SWU-3120Purchase Date 20 . . . Purchase PlaceSerial NumberNameAddressTelethis deviceGratuitous Service Seowon intech guarantees this product against defects in materials and workmanship for a period of one year from original date of purchase.Compensatory Service In case of not defect- If you request the service in case of not defect, you have to pay a charge so please make sure to read the user manual first. In case of consumer fault - in case of improper care by customer like flooding, impact etc- in case of repair or disassembling by consumer at random - in case of defect due to repair by improper person who is not our company engineer or partner’s engineer - in case of defect with using separate product which is not provided by our company - in case of defect or damage due to other carelessnessIn case of miscellaneous - in case of natural disaster such as fire, salt damage and flood damage- in case of running out durability of wasteful components Quality Warranty 33
RF EXPOSURE INFORMATIONYour WIMAX USB Modem is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluate on of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the device transmitting at its highest certified power level in all tested frequency bands. The SAR tests are performed in several positions and locations as required by the FCC. The highest SAR value for this device is 0.728 W/kg. While there may be differences between the SAR levels of various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information of this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID : V7MSWU-3120. Near-Body Operation To maintain compliance with FCC RF exposure requirements, maintain a 0.5cm, separation distance between the user's body and this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technical for help. WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept ant interference received, including interference that may cause undesirable operation.

Navigation menu