SES imagotag AP0001 digital network controller transceiver User Manual Product Specification AP 2010

imagotag GmbH digital network controller transceiver Product Specification AP 2010

UserManual.wiki >

AP0001 User Manual >

Contents

1. Quick start guide
2. User manual

User manual

1.1 Key Features ................................................................................................................................................ 4 2.1 Front, Side and Top View ............................................................................................................................. 5 2.2 Upper Surface .............................................................................................................................................. 5 2.3 Side View...................................................................................................................................................... 6 2.4 Rear View ..................................................................................................................................................... 6 2.5 Status LED Colors ......................................................................................................................................... 7 2.6 Mechanical Dimensions ............................................................................................................................... 7 3.1 Used Channels ............................................................................................................................................. 8 3.2 Cabel Specifications ..................................................................................................................................... 8 3.3 Power Supply Specifications ........................................................................................................................ 9 3.4 Barcode Information .................................................................................................................................. 10 4.1 General Technical characteristics .............................................................................................................. 11 4.2 Power and Current Consumption .............................................................................................................. 11 4.3 General Specifications ............................................................................................................................... 11 5.1 Mounting Location Specifications ............................................................................................................. 12 5.2 Screw of the Antenna ................................................................................................................................ 12 5.3 Metal Bracket for Mounting on Wall, Ceiling or T-Mounting Rail ............................................................. 12 6.1 Humidity and Operating Conditions .......................................................................................................... 15 6.2 Storage Conditions ..................................................................................................................................... 15 6.3 Cleaning Instructions ................................................................................................................................. 15 7.1 Packing Dimensions ................................................................................................................................... 16 7.2 Illustrations ................................................................................................................................................ 16 7.3 Palletization ............................................................................................................................................... 17 7.4 Ordering Information ................................................................................................................................. 17

8.1 Applied Standards ...................................................................................................................................... 18 8.2 Declaration ................................................................................................................................................. 18

The Access Point AP-2010 by imagotag is a network device similar to WLAN access points that is required for communication with the imagotag electronic shelf labels (transmits price information to the labels). Up to 10 000 labels can be managed per access point and the self-organizing network allows automatic roaming of labels without manual handling. The high transmission rate of the 2.4 GHz wireless technology and the intelligent task scheduling enables fast and secure updates on imago G1 labels of all sizes. This document is the technical specification of the Access Point AP-2010. Manages up to 10 000 imago G1 labels of all sizes Covers up to 2 000 m² (depending on shop layout) Low power consumption – powered by PoE (Power over Ethernet) or with low power plug Easy configuration and monitoring Optimized scheduling of tasks and self-managed roaming of labels

Front, side and top view of the AP-2010 Mounting plate fixation screw-hole Antenna socket LED Antenna Top view of the imagotag AP-2010 Connection for the Power Supply Reset LAN/PoE unused Console

Color Description Note Red Boot process Error Can take about 2 minutes, if it takes much longer, the device is defective and there is a need for service. Blue Normal mode --- Yellow Operational, but not connected to any server --- Red (blinking) Running Firmware Update During this time there is no connection to the electronic label With antenna: Outline (mm): 226 x 135 x 45 Weight: 350 g Without antenna: Outline (mm): 196 x 135 x 45 Weight: 320 g

Kanal Frequenz WLAN Kanal (802.11b/g) 0 2404 MHz WLAN 1 (2402 – 2422 MHz) 1 2010 MHz 2 2422 MHz 3 2425 MHz 4 2442 MHz WLAN 6 (2427 – 2447 MHz) 5 2445 MHz 6 2462 MHz WLAN 11 (2452 – 2472 MHz) 7 2470 MHz 8 2474 MHz 9 2477 MHz 10 2480 MHz Overview of used channels of the imagotag AP-2010 Visualization of used channels of the imagotag AP-2010 You can use a commercially available LAN cable (CAT-5 or higher) for data connection and the power supply (if PoE is used) of the imagotag AP-2010.

Sunny Computer Technology Europe s.r.o. Model: SYS1449-1505-W2E Input: 100-240 V ~ 1.0 A MAX, 50-60Hz Output: 5V 3A Output Power: 15W MAX Operating Temperature: 0° C to + 45° C Dimension (mm): 72.5 x 34 x 45 Note: This is the European version

The AP-2010 comes with an AP-ID, P/N, MAC and S/N. The AP-ID consists of 5 decimal digits (0-9). Part Description Format Example Comment Source A Production fab 2 alpha 01 Specified by imagotag once for each fab B Product family 2 alpha A1 Specified by imagotag in the product specification document C Type identifier 2 hex A0 D Product version 2 alpha 02 E Product revision 3 alpha 004 Incremented on every change of product specification - Separator “-“ - Fixed F Internal 1 alpha I Internal Calculated during production G Year 2 dec 12 H Week 2 dec 38 Calendar week in current year (01-53) I Weekday 1 dec 5 J Internal 4 dec 1133 Continuous Serial Number (Counter) S/N Format: AABBCCDDEEE-FGGHHIJJJJ S/N Example: 01A1A002004-I123851133 Note: Calendar week date is calculated according to ISO 8601 (see http://en.wikipedia.org/wiki/ISO_week_date) Part Description Format Example B Product family 2 alpha A1 C Type identifier 2 hex A0 D Product version 2 alpha 02 P/N Format: BBCCDD P/N Example: A1A001

Power: External Power Supply: 5 VDC / 3A Power Supply via PoE: IEEE 802.3af, IEEE 802.3at Power consumption: 15W MAX, typical 3W Technology: Radio technology: proprietary Operating frequency: 2.4 GHz (ISM-Band) – 2.4835 GHz Transmitted power: ≤ 10 dBm Number of Channels: 11 Access protocol: proprietary Power consumption measurements indicate that the AP-2010 has the following patterns: Operating Current: ≤ 60 mA (max. current) Operating Power: ≤ 280 mW Supply Voltage: 5V ± 10% 600 MHz ARM Cortex-A8 Memory - 256MB DDR2 memory 256MB NAND Flash SD/MMC card connector o 512 MB card with imagotag software preinstalled Power over Ethernet (PoE IEEE 802.3af / IEEE 802.3at) o The original IEEE 802.3af-2003 PoE standard provides up to 15.4 W of DC power (minimum 44 V DC and 350 mA to each device). Only 12.95 W is assured to be available at the powered device as some power is dissipated in the cable. Other Interfaces o Serial RS232 Interface o 10/100 Ethernet Interface Power o Power source options (DC, PoE) o 3.3 V I/O operation o DC supply 5V ± 10%, 3A Max OS: Embedded Linux (Kernel: 2.6.32) imago AP-2010 application software in latest version (current 1.0.4) imago RF Firmware in latest version (current 2.0.6)

The Access Point could be mounted on a: Concrete wall Mortar wall T-Mounting Rail Screw of the Antenna Front Part Direction of Rotation Connection Socket Rear Part (Swiveling) Note: Screw the antenna with only the front part (1) Once the metal bracket is mounted, the AP-2010 will be mechanical connected and fixed with a fixing screw. Metal Bracket for imagotag AP-2010

Wall or Ceiling Mounting (Scheme) Mounting Surface imagotag AP-2010 Metal Bracket Fixation Screw Mounting Screw a. Install the metal bracket to the wall or ceiling with the help of dowels and mounting screws. imagotag AP-2010 Locking Tabs b. Slide the access point to the mechanical lock of the locking tabs c. Attach the AP-2010 with the enclosed fixation screw to the metal bracket

Attach the metal bracket using the included “caddy® clips” from Erico® and the enclosed, self-locking screw nuts M6. Mounting an AP-2010 on a T-Mounting Rail T-Mounting Rail imagotag AP-2010 Metal Bracket Fixation Screw Self-locking Screw Nuts M6 ERICO® „caddy® clips“ a. Place 2 pieces of “caddy® clips” with the right distance on the T-Mounting Rail and fix it (twist) b. Place the metal bracket c. Fix the Metal Bracket with 2 pieces of the self-locking screw nuts M6 d. Slide the access point to the mechanical lock of the locking tabs e. Attach the AP-2010 with the enclosed fixation screw to the metal bracket

Turned OFF: Temperature: -20° C to + 70° C Humidity: 10% to 85% (non-condensing) Turned ON: Temperature: 0° C to + 40° C Humidity: 10% to 80% (non-condensing) Temperature: -20 °C to + 70 °C Humidity: 10% to 85% (non-condensing) Steps: 1) Shutdown Access Point 2) Plug Out Power Supply (AC or PoE) 3) Clean the Access Point with the help of a damp cloth Note: Do not use liquid or aerosol cleaners.

DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 520 350 260 LAYER / UNIT 3 SETS / BOX 10 PALLET 1200 800 140 BOXES / LAYER 4 SETS / LAYER 40 UNIT 1200 800 960 BOXES / UNIT 12 SETS / UNIT 120 Imagotag AP-2010 / Box: 10

You can choose between the following offered packages & accessories of the AP-2010: Article Number Model Description 120002 AP-2010 AP-2010 incl. Antenna 120003 AP-2010 AP-2010 Bundle incl. Antenna and PSU (EUR) 120004 AP-2010 AP-2010 Bundle incl. Antenna and mounting plate 120008 AP-2010 AP-2010 Bundle incl. Antenna, PSU (EUR) and mounting plate 130001 Antenna ANT OMNI 5 RP SMA INDOOR 120007 Mounting Plate Mounting Plate 120005 AP-2010 PSU (EUR) Power Supply

Housing, board and the display of the imagotag AP-2010 conform with the ROHS Directive The product meets the EU safety, health and environmental protection requirements and has the approval of CE marking Information Technology Equipment EN 60950-1/A2:2013 UL 60950-1/A2:2014 CSA CAN/CSA-C22.2 NO.60950-1-07 EMV EN 301489-17 V2.2.1 R&TTE EN 300328 V1.8.1 Human Exposure to Electromagnetic Fields EN 62479:2010 The company imagotag GmbH declares on his own responsibility that the AP-2010 corresponds to the standards mentioned above. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Don't drop it. Keep it away from water. Don’t use the AP-2010 with defective parts. Don’t use the AP-2010 with spare parts and accessories which are not examined and approved by the imagotag GmbH. Unauthorized changes or modifications to the electronic label and their components without the consent of imagotag GmbH are not allowed. Don't throw defective batteries into the dustbin. Give them to a reprocessing company. Don't throw AP-2010 into the dustbin. Give them to a reprocessing company. Contact imagotag GmbH for more details about this process.