SES imagotag E00003 digital network transceiver User Manual Product Specification imago G1 7 4

imagotag GmbH digital network transceiver Product Specification imago G1 7 4

Contents

User Manual

1.1 Key Features ................................................................................................................................................ 3
2.1 Technical characteristics .............................................................................................................................. 4
2.2 Mechanical Dimensions ............................................................................................................................... 5
2.3 Barcode Information .................................................................................................................................... 5
2.4 Serial Number .............................................................................................................................................. 6
3.1 Power and Current Consumption ................................................................................................................ 7
3.2 Transmission power ..................................................................................................................................... 7
4.1 Overview ...................................................................................................................................................... 8
5.1 Operating Conditions ................................................................................................................................... 9
5.2 Cleaning Instructions ................................................................................................................................... 9
5.3 Storage Conditions ....................................................................................................................................... 9
5.4 Humidity Conditions .................................................................................................................................... 9
6.1 Audience .................................................................................................................................................... 10
6.2 Instructions ................................................................................................................................................ 10
6.3 Steps .......................................................................................................................................................... 10
8.1 Packing Dimensions ................................................................................................................................... 12
8.2 Illustrations ................................................................................................................................................ 12
8.3 Palletization ............................................................................................................................................... 13
8.4 Ordering Information ................................................................................................................................. 13
9.1 Applied Standards ...................................................................................................................................... 14
9.2 Declaration ................................................................................................................................................. 14
The G1 7.4 is a part of the imago G1 electronic shelf label family with 2.7 inch, 4.4 inch and 7.4 inch e-Ink
displays.
The main features of this product are:
800 x 480 px
162 x 97 mm active display area
Up to 500 label updates per hour
5-year battery lifetime with 8 updates per day
This document is the technical specification of the G1 7.4 inch label
2.4 GHz bi-directional MSK proprietary radio
Radio coverage: up to 25 meters
Return Signal: yes
11 available communication channels
Ultra-low power consumption – 5 years battery life with 8 updates / day
Customer-replaceable battery
Full graphical 7.4 inch e-Ink display with paper-like readability
Changeable and customizable front covers
Super wide viewing angle (nearly 180 degrees)
Flexible mounting options available
Supports 4 multiple pages with preloading and fast page switching
May be used in landscape and portrait mode
Fast response time (less than 15 seconds)
water resistant
128-bit AES encryption with secure key exchange
500 label updates per hour and AP
The imago G1 7.4 is made of several external parts:
1. Battery Cover including
a. Label ID
b. Label ID barcode
c. S/N
2. Battery pack
3. Main Unit including
a. Back Cover
b. PCB
c. Display
d. Transparent Front Cover
4. Front Cover Frame
a. Customizable in design and color
b. Replaceable
Outline (mm): 186.9 x 125.9 x 19.3
Weight: 239 g
The labels come with a label ID (which is a unique identifier – just like a MAC address) and this label ID as a
barcode on the display (and printed on the back of the label).
The label ID consists of 8 hexadecimal digits (0-9 / A-F). The first 2 digits identify the different label types,
shown on the following table:
Caption
Label-ID
Display resolution
DPIs
Display colors
imago G1 2.0
A1xxxxxx
200 × 96
111 dpi
Monochrom (1 bit)
9
imago G1 2.7
B3xxxxxx
264 × 176
117 dpi
Monochrom (1 bit)
9
imago G1 4.4
C1xxxxxx
400 x 300
113 dpi
Monochrom (1 bit)
13
imago G1 7.4
D1xxxxxx
480 x 800
126 dpi
Monochrom (1 bit)
13
Part
Description
Format
Example
Comment
Source
A
Production fab
2 alpha
01
Specified by imagotag
once for each fab
B
Product family
2 alpha
G1
Specified by imagotag in
the product specification
document
C
Type identifier
2 hex
D1
D
Product version
2 alpha
01
E
Product
revision
3 alpha
003
Incremented on every
change of product
specification
-
Separator
“-“
-
Fixed
F
Internal
1 alpha
O
Internal
Calculated during
production
G
Year
1 dec
4
H
Week
2 dec
10
Calendar week in current
year (01-53)
I
Day of Week
1 dec
3
J
Internal
5 dec
00071
Continuous Serial Number
(Counter)
Format: AABBCCDDEEE- FGHHIJJJJJ
Example: 01G1D101003- O410300071
Note:
Calendar week date is calculated according to ISO 8601
(see http://en.wikipedia.org/wiki/ISO_week_date)
The power supply are 3x cell-button batteries, model CR2477T. It delivers a 3V operating voltage and 3 000
mAh nominal capacity.
Power consumption measurements indicate that the G1 7.4 has the following patterns:
Standby mode (standby radio) : ≤ 1 µA
Standby mode (active radio) ≤ 8 mA
Active mode (active radio and active data processing) ≤ 35 mA
Battery pack (3x CR2477T nominal) lifetime - 5 years (at max. 8 updates per day)
Note: battery lifetime can vary depending on the operating conditions of the ESLs (temperature, radio usage
etc…)
Each ESL has got a transmission power of ≤ 10 dBm (according to the FCC certification).
This is a 7.4” a-Si TFT active matrix Electronic Paper Display (EPD) module. The module has such high
resolution (126 dpi) that it is able to easily display fine patterns. Due to its bi-stable nature, the EPD module
requires very little power to update and needs no power to maintain an image.
Note (1): Not including the FPC
Temperature: 0° C to + 45° C
Humidity: 10% to 80% (non-condensing)
Clean the electronic label with the help of a damp cloth.
Note: Do not use liquid or aerosol cleaners and keep it away from water.
Temperature: -20 °C to + 70 °C
Humidity: 10% to 85% (non-condensing)
Notes:
High humidity combined with low temperature are not recommended
Low temperature will reduce the battery lifetime
Only persons with the following knowledge are allowed to replace the battery:
Battery
Electronic assemblies like circuit board
Compliance of the instructions
Risk of explosion through incorrect battery replacement.
Use battery pack exclusive provided from the company imagotag GmbH.
Keep attention that your hands are dry before you start with the replacement.
Don’t use sharps to open the label.
Don’t use your fingernails to open the label.
Don’t touch the circuit board of the open label.
1. Use the imagotag battery cover tool to open the battery cover. Afterwards take the battery cover
from the label.
2. Pull the white plug out of the socket, don’t pull on the cable.
3. Take out the battery pack.
4. Put in the new battery pack.
5. Push the white plug in the socket.
6. Put the battery cover on the label casing.
High Temperature Operation
Low Temperature Operation
High Temperature/Humidity
Operation
High Temperature Storage
Low Temperature Storage
High Temperature/Humidity
Storage
Temperature Shock (Storage)
Package Drop Test
Package Random Vibration Test
DIMENSIONS
STACKING
QUANTITY
LENGTH
WIDTH
HEIGHT
BOX
570
260
250
LAYER / UNIT
3
SETS / BOX
40
PALLET
1200
800
140
BOXES / LAYER
6
SETS / LAYER
240
UNIT
1200
800
890
BOXES / UNIT
18
SETS / UNIT
720
Imago G1 7.4 Labels / Box: 40
CARTON OUTER 74:
Quality: T33/CB
Color: brown
FEFCO 0201
CARTON 74:
Quality: 321/1B
Color: inside brown/outside white
FEFCO 0215 (Blitzboden)
You can choose between the following offered label types and colors:
Article Number
Model
Description
112301
7.4 white
imago G1 7.4" RAL 9003 (white)
112302
7.4 black
imago G1 7.4" RAL 7021 (black)
112303
7.4 window grey
imago G1 7.4" RAL 7040 (window grey)
112305
7.4 white + TP
imago G1 7.4" RAL 9003 (white) with theft protection
112307
7.4 black + TP
imago G1 7.4" RAL 7021 (black) with theft protection
112308
7.4 window grey + TP
imago G1 7.4" RAL 7040 (window grey) with theft protection
single pack
o 10 labels / box
multi pack
o 40 labels / box
Housing, board and the display of the ESL conform with the ROHS Directive
The product meets the EU safety, health and environmental protection requirements
and has the approval of CE marking
Information Technology Equipment
EN 60950-1/A2:2013
UL 60950-1/A2:2014
CSA CAN/CSA-C22.2 NO.60950-1-07
EMV
EN 301489-17 V2.2.1
R&TTE
EN 300328 V1.8.1
Human Exposure to Electromagnetic Fields
EN 62479:2010
The company imagotag GmbH declares on his own responsibility that the imago G1 7.4 corresponds to the
standards mentioned above.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Never dismantle the product because except battery there is no component which
could be changed by someone who is not qualified.
Don't drop it.
Keep it away from water.
Don’t use the label with defective parts.
Don’t use the label with spare parts and accessories which are not examined and
approved by the imagotag GmbH.
Unauthorized changes or modifications to the electronic label and their components
without the consent of imagotag GmbH are not allowed.
Don't heat, recharge or bend battery.
Keep away batteries from children.
Don't throw defective batteries into the dustbin. Give them to a reprocessing
company.
Don't throw ESL into the dustbin. Give them to a reprocessing company.
Contact imagotag GmbH for more details about this process.

Navigation menu