SES imagotag E00003 digital network transceiver User Manual Product Specification imago G1 7 4
imagotag GmbH digital network transceiver Product Specification imago G1 7 4
Contents
- 1. Quick start guide
- 2. User Manual
User Manual
1.1 Key Features ................................................................................................................................................ 3 2.1 Technical characteristics .............................................................................................................................. 4 2.2 Mechanical Dimensions ............................................................................................................................... 5 2.3 Barcode Information .................................................................................................................................... 5 2.4 Serial Number .............................................................................................................................................. 6 3.1 Power and Current Consumption ................................................................................................................ 7 3.2 Transmission power ..................................................................................................................................... 7 4.1 Overview ...................................................................................................................................................... 8 5.1 Operating Conditions ................................................................................................................................... 9 5.2 Cleaning Instructions ................................................................................................................................... 9 5.3 Storage Conditions....................................................................................................................................... 9 5.4 Humidity Conditions .................................................................................................................................... 9 6.1 Audience .................................................................................................................................................... 10 6.2 Instructions ................................................................................................................................................ 10 6.3 Steps .......................................................................................................................................................... 10 8.1 Packing Dimensions ................................................................................................................................... 12 8.2 Illustrations ................................................................................................................................................ 12 8.3 Palletization ............................................................................................................................................... 13 8.4 Ordering Information................................................................................................................................. 13 9.1 Applied Standards ...................................................................................................................................... 14 9.2 Declaration................................................................................................................................................. 14 The G1 7.4 is a part of the imago G1 electronic shelf label family with 2.7 inch, 4.4 inch and 7.4 inch e-Ink displays. The main features of this product are: 800 x 480 px 162 x 97 mm active display area Up to 500 label updates per hour 5-year battery lifetime with 8 updates per day This document is the technical specification of the G1 7.4 inch label 2.4 GHz bi-directional MSK proprietary radio Radio coverage: up to 25 meters Return Signal: yes 11 available communication channels Ultra-low power consumption – 5 years battery life with 8 updates / day Customer-replaceable battery Full graphical 7.4 inch e-Ink display with paper-like readability Changeable and customizable front covers Super wide viewing angle (nearly 180 degrees) Flexible mounting options available Supports 4 multiple pages with preloading and fast page switching May be used in landscape and portrait mode Fast response time (less than 15 seconds) water resistant 128-bit AES encryption with secure key exchange 500 label updates per hour and AP The imago G1 7.4 is made of several external parts: 1. Battery Cover including a. Label ID b. Label ID barcode c. S/N 2. Battery pack 3. Main Unit including a. Back Cover b. PCB c. Display d. Transparent Front Cover 4. Front Cover Frame a. Customizable in design and color b. Replaceable Outline (mm): 186.9 x 125.9 x 19.3 Weight: 239 g The labels come with a label ID (which is a unique identifier – just like a MAC address) and this label ID as a barcode on the display (and printed on the back of the label). The label ID consists of 8 hexadecimal digits (0-9 / A-F). The first 2 digits identify the different label types, shown on the following table: Caption Label-ID Display resolution DPIs Display colors Pages imago G1 2.0 A1xxxxxx 200 × 96 111 dpi Monochrom (1 bit) imago G1 2.7 B3xxxxxx 264 × 176 117 dpi Monochrom (1 bit) imago G1 4.4 C1xxxxxx 400 x 300 113 dpi Monochrom (1 bit) 13 imago G1 7.4 D1xxxxxx 480 x 800 126 dpi Monochrom (1 bit) 13 Part Description Format Example Comment Production fab 2 alpha 01 Product family 2 alpha G1 Type identifier Product version 2 hex 2 alpha D1 01 Product revision 3 alpha 003 Separator Internal Year “-“ 1 alpha 1 dec Internal Week 2 dec 10 Calendar week in current year (01-53) Day of Week 1 dec Internal 5 dec 00071 Format: Example: Incremented on every change of product specification Source Specified by imagotag once for each fab Specified by imagotag in the product specification document Fixed Continuous Serial Number (Counter) AABBCCDDEEE- FGHHIJJJJJ 01G1D101003- O410300071 Note: Calendar week date is calculated according to ISO 8601 (see http://en.wikipedia.org/wiki/ISO_week_date) Calculated during production The power supply are 3x cell-button batteries, model CR2477T. It delivers a 3V operating voltage and 3 000 mAh nominal capacity. Power consumption measurements indicate that the G1 7.4 has the following patterns: Standby mode (standby radio) : ≤ 1 µA Standby mode (active radio) ≤ 8 mA Active mode (active radio and active data processing) ≤ 35 mA Battery pack (3x CR2477T nominal) lifetime - 5 years (at max. 8 updates per day) Note: battery lifetime can vary depending on the operating conditions of the ESLs (temperature, radio usage etc…) Each ESL has got a transmission power of ≤ 10 dBm (according to the FCC certification). This is a 7.4” a-Si TFT active matrix Electronic Paper Display (EPD) module. The module has such high resolution (126 dpi) that it is able to easily display fine patterns. Due to its bi-stable nature, the EPD module requires very little power to update and needs no power to maintain an image. Note (1): Not including the FPC Temperature: 0° C to + 45° C Humidity: 10% to 80% (non-condensing) Clean the electronic label with the help of a damp cloth. Note: Do not use liquid or aerosol cleaners and keep it away from water. Temperature: -20 °C to + 70 °C Humidity: 10% to 85% (non-condensing) Notes: High humidity combined with low temperature are not recommended Low temperature will reduce the battery lifetime Only persons with the following knowledge are allowed to replace the battery: Battery Electronic assemblies like circuit board Compliance of the instructions Risk of explosion through incorrect battery replacement. Use battery pack exclusive provided from the company imagotag GmbH. Keep attention that your hands are dry before you start with the replacement. Don’t use sharps to open the label. Don’t use your fingernails to open the label. Don’t touch the circuit board of the open label. 1. Use the imagotag battery cover tool to open the battery cover. Afterwards take the battery cover from the label. 2. Pull the white plug out of the socket, don’t pull on the cable. 3. Take out the battery pack. 4. Put in the new battery pack. 5. Push the white plug in the socket. 6. Put the battery cover on the label casing. High Temperature Operation Low Temperature Operation High Temperature/Humidity Operation High Temperature Storage Low Temperature Storage High Temperature/Humidity Storage Temperature Shock (Storage) Package Drop Test Package Random Vibration Test DIMENSIONS LENGTH WIDTH STACKING QUANTITY HEIGHT 570 260 250 LAYER / UNIT SETS / BOX PALLET 1200 800 140 BOXES / LAYER SETS / LAYER 240 UNIT 1200 800 890 BOXES / UNIT 18 SETS / UNIT 720 BOX 40 Imago G1 7.4 Labels / Box: 40 CARTON 74: Quality: 321/1B Color: inside brown/outside white FEFCO 0215 (Blitzboden) CARTON OUTER 74: Quality: T33/CB Color: brown FEFCO 0201 You can choose between the following offered label types and colors: Article Number Model Description 112301 7.4 white imago G1 7.4" RAL 9003 (white) 112302 7.4 black imago G1 7.4" RAL 7021 (black) 112303 7.4 window grey imago G1 7.4" RAL 7040 (window grey) 112305 7.4 white + TP imago G1 7.4" RAL 9003 (white) with theft protection 112307 7.4 black + TP imago G1 7.4" RAL 7021 (black) with theft protection 112308 7.4 window grey + TP imago G1 7.4" RAL 7040 (window grey) with theft protection single pack o 10 labels / box multi pack o 40 labels / box Housing, board and the display of the ESL conform with the ROHS Directive The product meets the EU safety, health and environmental protection requirements and has the approval of CE marking Information Technology Equipment EN 60950-1/A2:2013 UL 60950-1/A2:2014 CSA CAN/CSA-C22.2 NO.60950-1-07 EMV EN 301489-17 V2.2.1 R&TTE EN 300328 V1.8.1 Human Exposure to Electromagnetic Fields EN 62479:2010 The company imagotag GmbH declares on his own responsibility that the imago G1 7.4 corresponds to the standards mentioned above. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Never dismantle the product because except battery there is no component which could be changed by someone who is not qualified. Don't drop it. Keep it away from water. Don’t use the label with defective parts. Don’t use the label with spare parts and accessories which are not examined and approved by the imagotag GmbH. Unauthorized changes or modifications to the electronic label and their components without the consent of imagotag GmbH are not allowed. Don't heat, recharge or bend battery. Keep away batteries from children. Don't throw defective batteries into the dustbin. Give them to a reprocessing company. Don't throw ESL into the dustbin. Give them to a reprocessing company. Contact imagotag GmbH for more details about this process.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 15 Language : de-AT Tagged PDF : Yes Title : Product Specification imago G1 7.4 Author : Philipp Maurer Creator : Microsoft® Word 2013 Create Date : 2014:10:30 13:15:07+01:00 Modify Date : 2014:10:30 13:15:07+01:00 Producer : Microsoft® Word 2013EXIF Metadata provided by EXIF.tools