SHANTOU YESTE ELECTRONIC AND TECHNOLOGY YESTE1688 BLUETOOTH SPEAKER User Manual

SHANTOU YESTE ELECTRONIC AND TECHNOLOGY CO.,LTD BLUETOOTH SPEAKER Users Manual

User manual

User Manual Product specifications： Bluetooth :3.0+EDR Support:OPP,OBEX,SPP,A2DP,AVRCP,FTP,HS/HF,DUN,PROFILES Working distance: 10M SNR: ≥80db Battery:3.7V 600Mah Normal volume playing time: 2H Speaker driver : Ø 40 mm, 4 OHM, 3 W Frequency response: 120 Hz-18 KHz unit size：110mm*39mm*54mm unit weight：170g charging：5Ｖ/500mAh Product Feature: 1. international advanced bluetooth chip and circuit design techniques, support all bluetooth device ; 2. with FM function, can search radio station broadcast automatically. 3,with HI-FI speaker, to sure the clear and bright sound quality. 4. Support TF Card, 5, dual power suppor by Mini USB charging /BL-5C lion battery, smart and fast charging 6. Support AUX audio input, connect bluetooth speaker through output
devices, for example MP3,MP4,PSP,tablet pc, mobile phone,etc. 7. play music after pairing with bluetooth device for example mobile/ MID/ TV, the working distance is within 15M. key function: 1, power switch: off to close, on is working 2,DC 5V charging slot 3,line in:it can play audio via AUX cable to audio device 4,Micro SD slot:it can decode and play MP3 format audio when put Micro SD card into the slot 5,when play music , press short for last song, press long to turn down the volume. 6,when play music , press short for next song, press long to turn up the volume. 7, under bluetooth mode with mobile paired , press short to answer a call , press again to hand up, press long to ring up a call. 8, When play music(USB card/ TF card/LINE IN/ bluetooth), press short for "play/pause ".press long to switch USB/TF/FM /bluetooth/line in. in FM mode, press short to search station automatically, press again to stop searching. NOTE: Under FM mode, put in the AUX cable to get better FM radio station
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical hand held operations with the device contacted directly to the human body to the sides of the device. To maintain compliance with FCC RF exposure compliance requirements, avoid direct contact to the transmitting antenna during transmitting

Navigation menu