SHANTOU YESTE ELECTRONIC AND TECHNOLOGY YESTE1688 BLUETOOTH SPEAKER User Manual
SHANTOU YESTE ELECTRONIC AND TECHNOLOGY CO.,LTD BLUETOOTH SPEAKER Users Manual
User manual
User Manual
Product specifications：
Bluetooth :3.0+EDR
Support:OPP,OBEX,SPP,A2DP,AVRCP,FTP,HS/HF,DUN,PROFILES
Working distance: 10M
SNR: ≥80db
Battery:3.7V 600Mah
Normal volume playing time: 2H
Speaker driver : Ø 40 mm, 4 OHM, 3 W
Frequency response: 120 Hz-18 KHz
unit size：110mm*39mm*54mm
unit weight：170g
charging：5Ｖ/500mAh
Product Feature:
1. international advanced bluetooth chip and circuit design techniques,
support all bluetooth device ;
2. with FM function, can search radio station broadcast automatically.
3,with HI-FI speaker, to sure the clear and bright sound quality.
4. Support TF Card,
5, dual power suppor by Mini USB charging /BL-5C lion battery, smart and fast
charging
6. Support AUX audio input, connect bluetooth speaker through output
devices, for example MP3,MP4,PSP,tablet pc, mobile phone,etc.
7. play music after pairing with bluetooth device for example mobile/ MID/
TV, the working distance is within 15M.
key function:
1, power switch: off to close, on is working
2,DC 5V charging slot
3,line in:it can play audio via AUX cable to audio device
4,Micro SD slot:it can decode and play MP3 format audio when put Micro SD
card into the slot
5,when play music , press short for last song, press long to turn down the
volume.
6,when play music , press short for next song, press long to turn up the volume.
7, under bluetooth mode with mobile paired , press short to answer a call ,
press again to hand up, press long to ring up a call.
8, When play music(USB card/ TF card/LINE IN/ bluetooth), press short for
"play/pause ".press long to switch USB/TF/FM /bluetooth/line in. in FM
mode, press short to search station automatically, press again to stop
searching.
NOTE:
Under FM mode, put in the AUX cable to get better FM radio station
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular installati
on. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This device was tested for typical hand held
operations with the device contacted directly to the human body to the sides of
the device.
To maintain compliance with FCC RF exposure compliance requirements,
avoid direct contact to the transmitting antenna during transmitting