SHEN ZHEN HIDIN TECHNOLOGY KS7011 Dimmer Switch User Manual P042 026 KS7011
SHEN ZHEN HIDIN TECHNOLOGY CO., LTD Dimmer Switch P042 026 KS7011
user manual
Dimmer Switch User Guide
Notes Before Installation
1. Wi-Fi Only support a 2.4GHz network (802.11 b/g/n)
2.Only support one way/single pole circuit, Not compatible with 3-way
3.Neutral wire Required.
4.Basic electrical wiring knowledge or experience required , or please consult
a professional electrician
5.Never connect the neutral wire to any switch wires
6.ON/OFF Button also can be used as reset button, long press to reset your dimmer switch
to factory defaults. Only do this if you are sure you want to erase all your settings
Smart Home
KS-7011
Digital Display Meaning
1
2
Represents the brightness level
( “ ”:Represents the minimum brightness)
( “ ”:Represents the maximum brightness)
Description
Status
LI NE
NE UT RAL
GR OU ND
LO AD
Specifications
Type
Model
Power supply mode
Rated Voltage
Rated Power
Wireless Frequency
Wireless Standard
Dimmer Switch
KS-7011
Neutral+Live Wire
AC120V 60Hz
INC 500W LED 150W
2.412-2.462GHZ
IEEE802.11 b/g/n
Product Size Fac e plate :125 x8 0m m(4.92x3.15inch)
Pro duct:104x45x39mm (4.09x1.77x1.5 3i nch)
Rapidly blink means you are in “Default Mode”
Slowly blink means you are in “AP Mode”
Represents successful connection
Represents failure connection
Represents power OFF
5
WARNING! RISK OF ELECTRIC SHOCK.
Incorrect installation could be dangerous or illegal.
Multiple breakers may need to be de-energized for
safe installation . Please call a professional
electrician if you are unfamiliar or uncomfortable
with electrical work.
Mark or record the corresponding line before
removing the old switch
Label your wires
STPE.3
Use wire-nuts to connect the switch wires to your
home wires , following the diagram. Be careful to
match line and load wires. Then remove the stickers,
screw the switch into the wall. And attach the
faceplate.
Install switch
STPE.4
Line
Load
Load LINE
GROUND
NEUTRAL
Usually:
White represents the neutral line
Black represents the fire line
Green or yellow or a single bare copper wire
representing the ground wire
The above is for reference only and cannot be used
as a standard.
ON OFF
ON OFF
ON OFF
STPE.5
Tap NEXT when the “ ” indicator blinks
STPE.6
Check the indicator status
Turn on your switch’s power from the circuit breaker.
Press the switch a few times to make sure it works.
Turn on circuit breaker
Digital Display rapidly blinks
(2 times per second)
6
3
4
ON OFF
ON OFF
ON OFF
Find your light’s control in your circuit breaker and
turn it off, Then make sure the power is off by flipping
your switch a few times.
Turn off circuit breaker
Installation Guide
STPE.1
In the wall cassette . look for one or more white wires
secured with a wire nut. Do you have a neutral wire?
Find the neutral wire
STPE.2
Line
Load
Ground
Neutral
Switch
(Line/Load)
If you can’t find neutral wire
Please change another wall cassette. to find a neutral
wire,if you really can’t find out a neutral wire in your
wall cassette. please contact professional electrician
to help you.
Make sure your wiring is compatible. The
Dimmer replaces single-pole switches only.
If your light can be turned on from two
different wall switches, that’s a 3-way switch
and this Dimmer is not compatible
Before you install Check your bulb situation
All incandescent bulbs are dimmable, but not all
LEDs are. Check the light bulb package to confirm
The number of lights your Dimmer can control
depends on the type of bulb and whether the Dimmer
is installed in a single-switch box or a multi-switch box.
(Note: Does not support CFL bulbs)
Single
Incandescent Bulbs
Max 500Watts
Single LED Bulbs
Max 150Watts
(Actual wattage rating
not”equivalent”)
Multiple
Incandescent Bulbs
Total Power Max 500Watts
Multiple LED Bulbs
Total Power Max 150Watts
(Actual wattage rating
not”equivalent”)
GROUND
LINE
Load
NEUT RAL
LI NE
NE UTR AL
GR OUN D
LO AD
If you do not find the ground wire, you can not
connect the ground wire, but for safety,
it is recommended to connect the ground wire.
Confirm i nd icator ra pi dl y blink
How to ma ke indi cator r apidl y bl ink
Power on th e de vice and co nf ir m
that indi ca tor light r ap id ly blinks
Default Mode(Recommend)
Step 1.Make sure the indicator “ ”blinks rapidly, if not,
hold the ON/OFF button for 5-15 seconds for reset.
Indicator light “ ”rapidly blinks
(2 times per second)
Step.
to join your network
3.Enter Wi-Fi password Step.4.Wait till it is
successfully connected.
AP Mode(Alternative)
Indicator light “ ”slowly blinks
(1 time every 3 second)
Step 1.When the indicator ” blinks rapidly, press and hold
the ON/OFF button for another 5-15 seconds. the indicator “ ”
will blinks slowly.
“
Step.8
Step.2 Power on the
device and confirm
Step D:Give a name to the switch and tap”Done”. you
will find the device you’ve named is shown on the app
homepage. Tap the device to enter the setting page.
Note: The name you give to the device will be the
name for voice control on Amazon Alexa or Google
Home later. For example, the device is named
”Dimmer Switch” in this user guide.
Ente r Wi-Fi Pas sword
Conf irm
SmartLife_ xxxx
Connect Now
Done
Share witch Famil y
Dimmer Switc h
Add Device
1
Step.7
SmartLife- 506D
Connected
Back
2
Confirm indi cator slowly bl ink
How to m ake indic ator slow ly blink
Power on the dev ice and confirm
that indicat or light slowly b links
Enter W i- Fi Pass wo rd
Conf irm
Done
Share witch Family
Step.6
WLAN
Install the “Smart Life”APP
Step A .Find out “Smart Life”app in Apple app store,
Google Play, or scan the QR code bellow and install it.
The free app”Smart Life” is compatible with mobile
devices the support IOS8.0 above, Android 4.4 above
Step B .Enter the register interface, input the email
address/phone number for getting the verification
code to register an account. Please just login if you
already have a Smart Life account.
Step C:Add the switch to Smart Life APP
Note: This smart switch can only support 2.4G
network and cannot work with 5.0G network. please
check if your home network is 2.4G and make sure
that your phone has been connected to your WI-FI
home network
(1)Tap”+” button on top right corner to add device, the
tap”Wall switch” to enter next page.
Confirm indicator rapidly blink
How to m ak e indicator rap id ly blink
AP Mode
Power on the device and confirm
that indicator light rapidly blinks
7
8
9
10
Step.3
Step.2
Step.5Step.4
Step.9
Note: When finish the default mode
please go directly to Step.9
Dimmer Switc h
Dimmer Switc h>
Modify switch name
How to control the switch with Amazon Alexa?
Please make sure that your Alexa APP is connected to Amazon Echo. and both work together successfully
under your Wi-Fi home network.
Step .A: Log in your Alexa APP, tap top left corner,
and tap”Skills”.
Step .B: Type”Smart Life”, find “Smart Life ” form the
search result and tap it to enable the skill.
Step .C: Enter your account and password of
“Smart Life”app, tap “Link now”.then tap “Authorize”
on the next page to bind Smart Life account to Alexa
Same account and password as Smart Life App
Step .D: Once your Smart Life account is successfully
bound to Alexa, the following page will pop up. Tap
“Done” on top left corner, the tap”DISCOVER DEVICES”
on the next page.
Step .E: Wait a few seconds for Alexa to detect the
switch from Smart Life app. and you will find the
device named”Dimmer Switch” has been paired to
Alexa App from “Smart Life” APP.
Tap to turn ON/OFF
the switch
After Step E is done, you can now control the switch
with Alexa app on this setting page.
Step .F: Now you are able to control the switch via
Amazon Alexa.
Try these commands and see what happens by
asking Alexa:
Note: The device name is the one you give to the
switch on “Smart Life” App . In this user guide, the
device is named”Dimmer switch”.
For example:
“Alexa, turn on Dimmer switch”,
”Alexa, turn off Dimmer switch” etc.
“Alexa, set dimmer switch brightness to 50 percent”,
“Alexa, increase dimmer switch brightness to
50 percent”,
“Alexa ,decrease dimmer switch brightness to
50 percent”,
P.S Device can be renamed with a simple name that
you remember is easily.
How to control the switch with IFTTT?
Step .A: Visit the IFTTT official website on your PC
and sign in with your IFTTT account.
Note: You can also use IFTTT app and follow similar
steps to connect your device to the IFTTT. In this FAQ
we take the website setting method for example.
Step .B:”Search”for “Smart Life”,and then dick
“Smart Life” service.
Step .C: Click “Connect”, then login your Smart Life
ID and then tap”Link Now”.
Step .D: Successfully connect your IFTTT account to
your Smart Life ID. You are ready to enjoy the IFTTT
service of the product now.
Instructions: 2 methods to use
IFTTT with the product.
Method 1: On Smart Life service page, choose an
existing Applet you need, turn on it and then finish
the configuration.
We select “Sunset” as the Trigger.
Step .B: Create an Action.
Tap”this” to choose a Trigger. You can search for “
Smart Life” to choose a Smart Life Action.
We select “Turn on” of Dimmer Switch as “the Action
In this case.
Step .C: New Applet”if sunset, then turn on light
switch” is created as a result.
Note: The Smart Life service can only works when
create an action. You can’t use the “Smart Life” as a
Trigger.
Method 2: Create a new Applet on your own.
Click My Applets" at the top and then click
“New Applet" at the right top corner of the webpage
to create a new Applet.
Step .A: Create a Trigger.
Tap”this” to choose a Trigger. You can search for
”Weather Underground” to choose a Trigger.
12
14
13
17
18
FCC NOTE：
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including
interference that may cause undesired operation . The manufacturer
is not responsible for any radio or tv interference caused by
unauthorized modifications or change to this equipment. Such
modifications or change could void the user's authority to operate
the equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
To maintain compliance with FCC's RF exposure guidelines, this
equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body.
FAQ
19
After completing Part Two. you can control the with Smart Life APP on this setting page now.switch
Try timer function to easily set up schedule to turn ON/OFF dimmer switch.
Note:
If you want to control the light with Amazon
Alexa, please continue to read Page 13.
If you want to control the light with Google Home,
please skip Page 13 and read Page 16directly.
If you want to control the light with IFTTT,
please read Page 18 directly.
Try ON/OFF on the
app to control the
dimmer switch.
11
Slide here set the minimum brightness of the dimmer
Slide here to adjust the brightness
Dimmer Switch
Q: After the dimmer installed, the light bulb is not
bright
A:1.Check whether there is a neutral wire in the wall
switch box (This dimmer must require a neutral
wire)
2.Check if the wiring method is correspond with the
wiring diagram.
Q:Dimming function is not available after the
dimmer installed
A:1.Please confirm whether the type of bulb on the
dimmer corresponds to the type of bulb at home.
If the selection is wrong, please switch it to the
corresponding position and re-pair.
(At present, only LEDs and incandescent lamps are
supported, and CFL lamps are not supported at the
moment.)
For example, if the lamp at home is LED light, you
should switch it to LED position.
2.Confirm whether your LED bulbs support dimming
function (Generally, it is clearly marked on the box
of the bulb)
Q:After the dimmer installed, there are problems
such as malfunction
A:There are a lot of shapes and sizes for Wi-Fi
networks, also with many quirks of their own. It
doesn’t mean your Dimmer is malfunctioning. If
problems still are existing, please try these steps
below:
1.Forcedly quit and re-start the “Smart life” APP
then checking if that fixes the issues.
2.Unplug your router and plug it back to reboot it.
then check if that fixes the issues.
Q:After dimmer installed, failure to pair APP
A:1.Is the position of the installed dimmer covered
by WI-FI ? Or is it far from the router? or the
signal is weak? Make sure that the position
where the dimmer is installed can receive the
WI-FI signal normally.
2.Please confirm that the entered WI-FI password
is correct.
3.Please confirm that the WI-FI router is 2.4GHz.
(Device does not support 5GHz)
4.If all the above informations are correct but still
failure to get connected, please re-pair with AP
mode.
Dimmer Swi tc h
Dimmer Swi tc h
How to control the switch with Google Home?
Step .A: Open your Google Home APP,tap”Add” and
“Set up device”.
Step .B: Tap “Have something already set up? ”
Step .C: Search for “Smart Life” and add it
Step .D: Enter your account and password of
“Smart Life”app, tap “Link now”.then tap “Authorize”
on the next page to bind Smart Life account to Google
Home.
15
16
Preparation:
Downloaded the Google Home app
Registered your Google Account
Finish setting up Google Home
Step .E Now you are able to control the switch via
Google Home.
Try these commands and see what happens by
asking Google
ok,Google, turn on “device name”
ok,Google,turn off “device name”
Note: The device name is the one you give to the
switch on “Smart Life” App . In this user guide, the
device is named”Dimmer switch”.
For example:
“ok, Google, turn on Dimmer switch”
“ok,Google, turn off Dimmer switch” etc.
Attention: after Smart Life has been waken up,
you can say"Cancel"or "Stop" to exit Smart Life or
say "nothing" when you hear"What can I do for you".
Then says again"OK Google, talk to Smart Life" to
start voice control.
20
English
7.3.2(a)
TO REDUCE THE RISH OF OVERHEATING AND POSSIBLE
DAMAGE TO OTHER EQUIPMENT, DO NOT INSTALL TO
CONTROL A RECEPTACLE, A MOTOR OPERATED APPLIANCE,
OR A TRANSFORMER-SUPPLIED APPLIANCE
A
B
“Middle”Level
“B”Level
“A”Level
DIP Switch
Brightness”+”
ON/OFF Button
(Touch glass area)
Brightness”-”
Q:Why the switch work at first time, but not
working when i control again?
A:Please operate as follow:
Step one:Please adjust the brightness to “ ” level
on the touch panel,turn off the switch .Put the DIP
Switch to”Middle ”Level,turn switch ON.If the lamps
are working,switch can be used dimming function.
Please keep “Middle level” and install the face plate.
Step two:According to step one,if the lamps still
not working,Please adjust the brightness to “ ”level
again and turn off the switch .Continue put the DIP
switch to “B ”Level.Turn on the switch.If the lamps
are working well,the dimmer can be controlled
normally.Please keep the“B level ”and install the
face plate.
2
Click here to
Locked set
Click here select
type of your lamp
Click here to add schedule
21
Click here to enter
the dimming menu