SHEN ZHEN HIDIN TECHNOLOGY KS7011 Dimmer Switch User Manual P042 026 KS7011

Download:
Mirror Download [FCC.gov]
Document ID	4202183
Application ID	9sMRcb0e6ntnin9dk61PBA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	176.71kB (2208935 bits)
Date Submitted	2019-03-15 00:00:00
Date Available	2019-03-15 00:00:00
Creation Date	2019-03-13 17:11:38
Producing Software	Corel PDF Engine Version 15.0.0.486
Document Lastmod	2019-03-14 09:15:02
Document Title	P042-026-KS7011-说明书-英
Document Creator	CorelDRAW X5
Document Author:	Administrator

Dimmer Switch User Guide
KS-7011
Notes Before Installation
1. Wi-Fi Only support a 2.4GHz network (802.11 b/g/n)
2.Only support one way/single pole circuit, Not compatible with 3-way
3.Neutral wire Required.
4.Basic electrical wiring knowledge or experience required , or please consult
a professional electrician
5.Never connect the neutral wire to any switch wires
6.ON/OFF Button also can be used as reset button, long press to reset your dimmer switch
to factory defaults. Only do this if you are sure you want to erase all your settings
Smart Home
DIP Switch
“A”Level
“Middle”Level
LINE
LOAD
GROUND
Brightness” ”
NEUTRAL
“B”Level
ON/OFF Button
(Touch glass area)
Specifications
Brightness” ”
Type
Dimmer Switch
Model
KS-7011
Power supply mode
Neutral+Live Wire
Rated Voltage
AC120V 60Hz
Rated Power
INC 500W LED 150W
2.412-2.462GHZ
Wireless Frequency
Wireless Standard
IEEE802.11 b/g/n
Face plate:125x80mm(4.92x3.15inch)
Product:104x45x39mm (4.09x1.77x1.53inch)
Product Size
Digital Display Meaning
Description
Status
Represents the brightness level
( “ ”:Represents the minimum brightness)
( “ ”:Represents the maximum brightness)
Rapidly blink means you are in “Default Mode”
Slowly blink means you are in “AP Mode”
Represents successful connection
Represents failure connection
Represents power OFF
Before you install
Check your bulb situation
All incandescent bulbs are dimmable, but not all
WARNING! RISK OF ELECTRIC SHOCK.
LEDs are. Check the light bulb package to confirm
Incorrect installation could be dangerous or illegal.
Multiple breakers may need to be de-energized for (Note: Does not support CFL bulbs)
safe installation . Please call a professional
electrician if you are unfamiliar or uncomfortable
The number of lights your Dimmer can control
with electrical work.
depends on the type of bulb and whether the Dimmer
is installed in a single-switch box or a multi-switch box.
Single LED Bulbs
Max 150Watts
(Actual wattage rating
not”equivalent”)
Single
Incandescent Bulbs
Max 500Watts
Make sure your wiring is compatible. The
Dimmer replaces single-pole switches only.
If your light can be turned on from two
different wall switches, that’s a 3-way switch
and this Dimmer is not compatible
Multiple
Incandescent Bulbs
Total Power Max 500Watts
Multiple LED Bulbs
Total Power Max 150Watts
(Actual wattage rating
not”equivalent”)
Installation Guide
STPE.2
STPE.1
Find the neutral wire
Turn off circuit breaker
In the wall cassette . look for one or more white wires
Find your light’s control in your circuit breaker and
turn it off, Then make sure the power is off by flipping secured with a wire nut. Do you have a neutral wire?
your switch a few times.
Ground
Neutral
Load
ON
OFF
Line
ON
OFF
ON
OFF
Switch
(Line/Load)
If you can’t find neutral wire
Please change another wall cassette. to find a neutral
wire,if you really can’t find out a neutral wire in your
wall cassette. please contact professional electrician
to help you.
STPE.4
STPE.3
Install switch
Label your wires
Use wire-nuts to connect the switch wires to your
home wires , following the diagram. Be careful to
match line and load wires. Then remove the stickers,
screw the switch into the wall. And attach the
faceplate.
GROUND
Mark or record the corresponding line before
removing the old switch
Load
Load
ad
Line
LINE
LINE
Usually:
White represents the neutral line
Black represents the fire line
Green or yellow or a single bare copper wire
representing the ground wire
The above is for reference only and cannot be used
as a standard.
NE
UT
RA
NEUTRAL
Lo
LINE
RA
LOAD
UT
GROUND
NE
If you do not find the ground wire, you can not
connect the ground wire, but for safety,
it is recommended to connect the ground wire.
STPE.5
STPE.6
Turn on circuit breaker
Check the indicator status
Turn on your switch’s power from the circuit breaker.
Press the switch a few times to make sure it works.
Tap NEXT when the “
” indicator blinks
Digital Display rapidly blinks
(2 times per second)
ON
OFF
ON
OFF
ON
OFF
Install the “Smart Life”APP
Step A .Find out “Smart Life”app in Apple app store, Step C:Add the switch to Smart Life APP
Google Play, or scan the QR code bellow and install it. Note: This smart switch can only support 2.4G
network and cannot work with 5.0G network. please
check if your home network is 2.4G and make sure
that your phone has been connected to your WI-FI
home network
(1)Tap”+” button on top right corner to add device, the
tap”Wall switch” to enter next page.
The free app”Smart Life” is compatible with mobile
devices the support IOS8.0 above, Android 4.4 above
Step B .Enter the register interface, input the email
address/phone number for getting the verification
code to register an account. Please just login if you
already have a Smart Life account.
Default Mode(Recommend)
AP Mode(Alternative)
Indicator light “ ”rapidly blinks
(2 times per second)
Indicator light “
”slowly blinks
(1 time every 3 second)
Step 1.When the indicator “ ” blinks rapidly, press and hold
the ON/OFF button for another 5-15 seconds. the indicator “
will blinks slowly.
Step 1.Make sure the indicator “ ”blinks rapidly, if not,
hold the ON/OFF button for 5-15 seconds for reset.
”
AP Mode
Enter Wi-Fi Password
Confirm
Power on the device and confirm
that indicator light rapidly blinks
Power on the device and confirm
that indicator light rapidly blinks
How to make indicator rapidly blink
Power on the device and confirm
that indicator light slowly blinks
Confirm indicator rapidly blink
Step.2 Power on the
device and confirm
Step. 3.Enter Wi-Fi password
to join your network
How to make indicator rapidly blink
Step.4.Wait till it is
successfully connected.
How to make indicator slowly blink
Confirm indicator rapidly blink
Confirm indicator slowly blink
Note: When finish the default mode
please go directly to Step.9
Step.3
Step.2
Back
Enter Wi-Fi Password
SmartLife-506D
Connected
Confirm
SmartLife_xxxx
Connect Now
WLAN
Step.4
Step.6
Step.5
Step.7
Step D:Give a name to the switch and tap”Done”. you
will find the device you’ve named is shown on the app
homepage. Tap the device to enter the setting page.
Add Device
Note: The name you give to the device will be the
name for voice control on Amazon Alexa or Google
Home later. For example, the device is named
”Dimmer Switch” in this user guide.
Dimmer Switch
Dimmer Switch>
Share witch Family
Dimmer Switch
Done
Step.9
Step.8
Share witch Family
Modify switch name
Done
10
After completing Part Two. you can control the switch with Smart Life APP on this setting page now.
Click here to
Locked set
Click here select
type of your lamp
Try ON/OFF on the
app to control the
dimmer switch.
Click here to enter
the dimming menu
Slide here to adjust the brightness
Slide here set the minimum brightness of the dimmer
11
Try timer function to easily set up schedule to turn ON/OFF dimmer switch.
Note:
If you want to control the light with Amazon
Alexa, please continue to read Page 13.
If you want to control the light with Google Home,
please skip Page 13 and read Page 16directly.
Click here to add schedule
If you want to control the light with IFTTT,
please read Page 18 directly.
12
How to control the switch with Amazon Alexa?
Please make sure that your Alexa APP is connected to Amazon Echo. and both work together successfully
under your Wi-Fi home network.
Step .B: Type”Smart Life”, find “Smart Life ” form the
search result and tap it to enable the skill.
Step .A: Log in your Alexa APP, tap top left corner,
and tap”Skills”.
13
Step .C: Enter your account and password of
Step .D: Once your Smart Life account is successfully
“Smart Life”app, tap “Link now”.then tap “Authorize” bound to Alexa, the following page will pop up. Tap
on the next page to bind Smart Life account to Alexa
“Done” on top left corner, the tap” DISCOVER DEVICES ”
on the next page.
Same account and password as Smart Life App
14
Dimmer Switch
Step .E: Wait a few seconds for Alexa to detect the
switch from Smart Life app. and you will find the
device named”Dimmer Switch” has been paired to
Alexa App from “Smart Life” APP.
Tap to turn ON/OFF
the switch
Dimmer Switch
After Step E is done, you can now control the switch
with Alexa app on this setting page.
15
Step .F: Now you are able to control the switch via
Amazon Alexa.
Try these commands and see what happens by
asking Alexa:
Note: The device name is the one you give to the
switch on “Smart Life” App . In this user guide, the
device is named”Dimmer switch”.
For example:
“Alexa, turn on Dimmer switch”,
”Alexa, turn off Dimmer switch” etc.
“Alexa, set dimmer switch brightness to 50 percent”,
“Alexa, increase dimmer switch brightness to
50 percent”,
“Alexa ,decrease dimmer switch brightness to
50 percent”,
P.S Device can be renamed with a simple name that
you remember is easily.
How to control the switch with Google Home?
Preparation:
Downloaded the Google Home app
Registered your Google Account
Finish setting up Google Home
Step .A: Open your Google Home APP,tap”Add” and
“Set up device”.
Step .B: Tap “Have something already set up? ”
Step .C: Search for “Smart Life” and add it
16
Step .E Now you are able to control the switch via
Google Home.
Step .D: Enter your account and password of
“Smart Life”app, tap “Link now”.then tap “Authorize”
on the next page to bind Smart Life account to Google
Home.
Try these commands and see what happens by
asking Google
ok,Google, turn on “device name”
ok,Google,turn off “device name”
Note: The device name is the one you give to the
switch on “Smart Life” App . In this user guide, the
device is named”Dimmer switch”.
For example:
“ok, Google, turn on Dimmer switch”
“ok,Google, turn off Dimmer switch” etc.
Attention: after Smart Life has been waken up,
you can say"Cancel"or "Stop" to exit Smart Life or
say "nothing" when you hear"What can I do for you".
Then says again"OK Google, talk to Smart Life" to
start voice control.
17
I nstructions: 2 methods to use
How to control the switch with IFTTT?
Step .A: Visit the IFTTT official website on your PC
IFTTT with the product.
and sign in with your IFTTT account.
Method 1: On Smart Life service page, choose an
Note: You can also use IFTTT app and follow similar
existing Applet you need, turn on it and then finish
steps to connect your device to the IFTTT. In this FAQ the configuration.
we take the website setting method for example.
Method 2: Create a new Applet on your own.
Step .B:”Search”for “Smart Life”,and then dick
Click My Applets" at the top and then click
“Smart Life” service.
“New Applet" at the right top corner of the webpage
Step .C: Click “Connect”, then login your Smart Life
to create a new Applet.
ID and then tap”Link Now”.
Step .A: Create a Trigger.
T ap”this” to choose a Trigger. You can search for
”Weather Underground” to choose a Trigger.
Step .D: Successfully connect your IFTTT account to
your Smart Life ID. You are ready to enjoy the IFTTT
service of the product now.
We select “Sunset” as the Trigger.
18
FAQ
Step .B: Create an Action.
Tap”this” to choose a Trigger. You can search for “
Smart Life” to choose a Smart Life Action.
Q:Why the switch work at first time, but not
working when i control again?
A:Please operate as follow:
Step one:Please adjust the brightness to “ ” level
on the touch panel,turn off the switch .Put the DIP
Switch to”Middle ”Level,turn switch ON.If the lamps
are working,switch can be used dimming function.
Please keep “Middle level” and install the face plate.
Dimmer Switch
Step two:According to step one,if the lamps still
not working,Please adjust the brightness to “ ”level
again and turn off the switch .Continue put the DIP
switch to “B ”Level.Turn on the switch.If the lamps
are working well,the dimmer can be controlled
normally.Please keep the“B level ”and install the
face plate.
We select “Turn on” of Dimmer Switch as “the Action
In this case.
Step .C: New Applet”if sunset, then turn on light
switch” is created as a result.
Note: The Smart Life service can only works when
create an action. You can’t use the “Smart Life” as a
Trigger.
19
Q:After the dimmer installed, there are problems
such as malfunction
A:There are a lot of shapes and sizes for Wi-Fi
networks, also with many quirks of their own. It
doesn’t mean your Dimmer is malfunctioning. If
problems still are existing, please try these steps
below:
1.Forcedly quit and re-start the “Smart life” APP
then checking if that fixes the issues.
2.Unplug your router and plug it back to reboot it.
then check if that fixes the issues.
Q: After the dimmer installed, the light bulb is not
bright
A:1.Check whether there is a neutral wire in the wall
switch box (This dimmer must require a neutral
wire)
2.Check if the wiring method is correspond with the
wiring diagram.
Q:Dimming function is not available after the
dimmer installed
A:1.Please confirm whether the type of bulb on the
dimmer corresponds to the type of bulb at home.
If the selection is wrong, please switch it to the
corresponding position and re-pair.
(At present, only LEDs and incandescent lamps are
supported, and CFL lamps are not supported at the
moment.)
For example, if the lamp at home is LED light, you
should switch it to LED position.
2.Confirm whether your LED bulbs support dimming
function (Generally, it is clearly marked on the box
of the bulb)
Q:After dimmer installed, failure to pair APP
A:1.Is the position of the installed dimmer covered
by WI-FI ? Or is it far from the router? or the
signal is weak? Make sure that the position
where the dimmer is installed can receive the
WI-FI signal normally.
2.Please confirm that the entered WI-FI password
is correct.
3.Please confirm that the WI-FI router is 2.4GHz.
(Device does not support 5GHz)
4.If all the above informations are correct but still
failure to get connected, please re-pair with AP
mode.
20
FCC NOTE：
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including
interference that may cause undesired operation . The manufacturer
is not responsible for any radio or tv interference caused by
unauthorized modifications or change to this equipment. Such
modifications or change could void the user's authority to operate
the equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
English
7.3.2(a)
TO REDUCE THE RISH OF OVERHEATING AND POSSIBLE
DAMAGE TO OTHER EQUIPMENT, DO NOT INSTALL TO
CONTROL A RECEPTACLE, A MOTOR OPERATED APPLIANCE,
OR A TRANSFORMER-SUPPLIED APPLIANCE
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
To maintain compliance with FCC's RF exposure guidelines, this
equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body.
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Creator                         : Administrator
Title                           : P042-026-KS7011-说明书-英
Create Date                     : 2019:03:13 17:11:38+08:00
Creator Tool                    : CorelDRAW X5
Modify Date                     : 2019:03:14 09:15:02+08:00
Metadata Date                   : 2019:03:14 09:15:02+08:00
Producer                        : Corel PDF Engine Version 15.0.0.486
Document ID                     : uuid:8f8fed8f-95f9-4882-88fd-e6b44e81290d
Instance ID                     : uuid:b0cb2a80-cc03-4c09-9d22-4440853a1560
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Author                          : Administrator

EXIF Metadata provided by EXIF.tools