SHEN ZHEN XIN HUA TIAN TECHNOLOGY XHT-BT06H USB BLUETOOTH DONGLE 4.0 User Manual 15 XHT BT06H UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3198419
Application ID	aM95jZZW58LtAAvnt6kZ4Q==
Document Description	15_XHT-BT06H UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.78kB (159700 bits)
Date Submitted	2016-11-17 00:00:00
Date Available	2016-11-17 00:00:00
Creation Date	2016-11-16 02:47:53
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2016-11-16 10:48:30
Document Title	LM506 Bluetooth 4.0 Dual-Mode Smart Ready (BLE) USB Adapter
Document Creator	Microsoft® Office Word 2007
Document Author:	Administrator

Product Specification
Model:XHT-BT06H
Thank you for purchasing this device USB BLUETOOTH DONGLE 4.0!
The dongle used bluetooth chip BCM20705
The BCM20705 Bluetooth 4.0 Dual-Mode Smart Ready (BLE) USB Adapter
The BCM20705 Bluetooth 4.0 Dual-Mode Smart Ready (BLE) USB Adapter combines Classic Bluetooth
2.0, 2.1 and 3.0 EDR standards along with the Bluetooth Low Energy (BLE) SMART standard, enabling
the adapter to communicate with both traditional Bluetooth Classic and Bluetooth Low-Energy (BLE)
SMART-enabled devices.
The BCM20705 utilises a Broadcom IC and can be supplied with or without Widcomm Windows drivers,
which support a wide-range of Bluetooth profiles such as: HFP, A2DP, OPP, FTP, DUN, PAN, SPP, HCRP,
SYNC, BTLE etc. The adapter will plug-and-play with Windows' own Bluetooth Stack when used with
Windows XP, VISTA, Windows 7 and Windows 8.
USB BLUETOOTH DONGLE 4.0 Technical Overview
The XHT-BT06H is a ROM-based HCI adapter and as such requires a PC or external host running a
compatible stack. BLUETOOTH Technologies has been able to reduce the overall footprint and
package-size the LM506 Bluetooth 4.0 BLE USB adapter, achieving a small Form Factor of 19.5mm x
16.0mm x 8.1 mm. The Bluetooth 4.0 BLE USB Adapter will support a data rate of 3 Mbps in Bluetooth
Classic EDR Mode and up to 250 Kbps in BLE Mode.
The Bluetooth 4.0 BLE USB adapter is a Class 2 adapter with a maximum distance of 110m in open
space. The Bluetooth 4.0 BLE USB Adapter has an output of 6dbm, which exceeds the Class 2
requirements set forth in the Bluetooth SIG standards, which state that any device with an output
above 4dBm is categorised as a Class 2 device.
Features
1.
Bluetooth 4.0 USB Adapter with Bluetooth Low Energy (BLE) support
2.
80 m range in open space
3.
Small Size Nano Adapter : 19.47(L) x 16(W) x 8.1(H) mm
4.
Stereo audio supported. VoIP calls over Bluetooth also supported
5.
Supports up to 7 ACL link and 3 SCO links
6.Downloadable Windows Driver, Widcomm Software support for Windows XP, VISTA, 7. BlueZ support on Linux
Manufacturer
Chipset
Broadcom
BCM20705
Power Classification
Class 2
Adapter Type
USB Adapter
Interface
USB 2.0
Bluetooth
Core 4.0 backward compatible with BT3.0/BT2.1 and BT2.0 + EDR
Specification
Frequency
2402 – 2480 MHz ISM Band
Modulation Method
GFSK for 1 Mbps, π/4-DQPSK for 2 Mbps, 8-DPSK for 3 Mbps
Spread Spectrum
FHSS (Frequency Hopping Spread Spectrum)
Operating
0°C to +60°C
Temperature
Storage
-10°C to +70°C
Temperature
Humidity
5~90% non-condensing
Data Transfer Rates
(Max)
3 Mbps enhanced data rate, 250 Kbps Low Energy mode data rate
Range
Maximum 80 m in open space
Tx Power
Class 2 (+4dBm)
Input Voltage
DC 5V (via USB port)
Antenna
Internal
Rx Sensitivity
< -82 dBm at <0.1 % BER
LED Indicator
Power/Active (BLUE)
OS Support
Windows XP/VISTA/7/8, Linux (Bluez 4.98 and above)
Default Firmware
Broadcom HCI ROM Firmware
6.
Broadcom Widcomm software and BlueZ support on Linux
Software
Size
22(L) x 15(W) x 6(H) mm
Weight
2g
Bluetooth Profile
USB VID/PID
GAP,SPP,HSP, HFP, DUN, FTP, FAX, PAN, LAN, HID, SYNC, HCRP, A2DP, AVRCP, BIP, GOEP,
SDAP, OPP, Bluetooth Low Energy, Bluetooth Proximity Profile
VID: 0X0A5C
PID”0X21E8
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2016:11:16 02:47:53Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2016:11:16 10:48:30+08:00
Metadata Date                   : 2016:11:16 10:48:30+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : LM506 Bluetooth 4.0 Dual-Mode Smart Ready (BLE) USB Adapter
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:f46cb37f-3ac3-412a-98c3-6c4d1c4fa1f2
Instance ID                     : uuid:28785208-dcda-49bf-b4b6-fba61ae1ba63
Page Count                      : 3
Language                        : zh-CN
Author                          : Administrator

EXIF Metadata provided by EXIF.tools