SHIFT INNOVATION DRONERACERSRX Drone Pro Racers User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3241764
Application ID	xQnCPHfTkah5SVPlnq2Kgg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	460.33kB (5754125 bits)
Date Submitted	2016-12-28 00:00:00
Date Available	2016-12-28 00:00:00
Creation Date	2016-11-23 10:52:08
Producing Software	Adobe PDF library 9.00
Document Lastmod	2016-11-23 10:52:09
Document Title	Users Manual
Document Creator	Adobe Illustrator CS4

Pro Tips
Whilst the drone is hovering,press the opposite button to the
directio
n ofdrone movemen tuntilyou r drone hovers stabley in
place.
Setup
Battery Management
1).Ensure thatthe device wifiis switched on.
2). Find the drone the nam e willbegin with "DPR-"and connect.
3). Ifmultiple players are tryin
g to connec tto severaldrone take itin turns to ensure correctpairing.
1).Connec tthe US B cable to the computer
2). Step 1 + connec tthe battery pin to US B cable
LE D status
Charging status
LE D is in red solid on
Powe r on
LE D red lightis off
Charging
LE D is in red solid on
Battery is Full
Th e App
RECORD
VIDEO
PRES S TO SELECT
VR HEADSE T UI
SELEC T STANDAR D UI
Readjus tfrequency for remote
an d receiver.(pleas
e refer to P.7
for details)
N o respons e after battery is 1.check ifthe powe r for
remote an d receiver is on
inserted in the heli
2.check the voltage ofthe
batterie
s ofremote and
receive
3.contacton the poles are
no tgood
Moto r doe s no trun when
Powe rforthe Li-Poly batter
operating the throttl
e stick is notenough
an d the indicator lighton
receiver keep s flashing
1.open the transmitte
r an d make
sure ifthe battery is inserted
in rightposition
2.use a full
y charge d battery
3.reinstal
lthe battery and
confirm ifthe contactfor
the pole is o
Helishake s a lot
4).
O N /OFF
OPEN
CONTROLLE R UI
BACK
Turning trimmer ha s been
trie
d bu thelistil
lspins,
spee d to the rightan d left
doe s no tconform
TAK E PHOTO
Adjusting Trim
Whilst the drone is hovering,press the opposite button to the
directio
n ofdrone movemen tuntilyou r drone hovers stabley in
place.
Ensure this is don e with n o win d disturbance.
TAK E PICTURE
Playset
Dron e Pro Racer
WARNIN G LABE L LEGEND
Suitable for indoor o r outdoo r whic h unde r Grad e 3 winds .
Mistakes mad e du e to negligence
o f these operation instruction
s ma y
caus e property loss an d severe
huma n injury
CAUTION
Mistakes mad e du e to
negligence o f operation
instructio
n ma y caus e
danger .
FORBIDDEN
SPEE D CONTROL
d place and farawa y from hea tsource an inflammable and explosive substance.
（ 1） During charging,the charge rshould be pu tin dry and ventilate
（ 2） Only used to charging 2S Li-ion orLi-polymerbattery pac k .if not ， the charge rorbattery ma y be damage d .
（ 3） Neve rleave the charge runsupervised during the process ofcharging in orderto avoid risk ofaccidents.
（ 4） Neve rimmediately charge yourbattery pac k as soon as the flightis finished， orwhe n its temperature doesn’tcoo ldow n .otherwise the battery willtake a risk in swelling
， even a fire.
y before connection the battery to charger.
（ 5） Ensure the correctness ofpolarit
（ 6） Avoid drop and violence during the process ofcharging .drop and violence willresultin internalshortcircuito fthe battery.
g time is becomin g shorten du e to long
（ 7） Forthe sake ofsafety ,please use originalcharging equipmen tand battery pac k .please chang e new one in time whe n the flyin
time usag e .
（ 8） Ifitis retained in the charge rfor a long time aftersaturated， the battery ma y automatically discharge.Whe n the charge rdetects thatthe voltage ofindividualcells is
e ofyourbattery pac k .It is advised thatplease cutoff
lowerthan the rated voltage,itwillre-charge untilsaturated.Frequently charging and discharging willshorten the lifetim
the powe rand took offthe battery afterthe charging is saturated.
5.Maintenance ofbattery pack
d place.The storage temperature ofenvironmen tisranged from 18°C to 25°C.
（ 1） The battery pac k should be pu tin dry and ventilate
e cycle.
（ 2） Please avoid frequentcharging and excessive discharging the battery pac k in orderto prolong its lif
（ 3） Itis a mus tto maintain the battery pac k before long-term storage.Tha tis to charge the battery to the levelof50-60% saturation.
（ 4） Ifthe storage term is over1 month ,itis advised to monthly chec k the voltage ofevery cellofthe battery pack. The voltage ofevery cellshould be notless than 3V.
Otherwise,please referto the abov e article（ 3） .
（ 5） From the view pointofprotection, new battery pac k should be motivated before usage .Tha tis to charge and discharge 3-5 times， bu tdischarge is notless than the
levelof70% saturation.This process willmak e the battery lifetim
e longerand voltage mor e stable.
Li-Po battery 3.7V 850mAh
Please d o no t fly the R.C .
helicopter unde r an y
specified forbidden
environment.
FLIP TH E UI
WARNING
CAUTION
Insertthe battery as in the picture and connec tthe pins together.
Insertthe battery as in the picture and connec tthe pins together.
FORBIDDEN
Insertthe battery as in the picture and connec tthe pins together.
Insertthe battery as in the picture and connec tthe pins together.
WARNING
Insertthe battery as in the picture and connec tthe pins together.
Insertthe battery as in the picture and connec tthe pins together.
CAUTION
Insertthe battery as in the picture and connec tthe pins together.
Insertthe battery as in the picture and connec tthe pins together.
1.main blade has deformed
2.motordoe s notwork wel
1.replace main blade
2.replace main motor
Cente ron the gyro is not
correct
Turn on the heliand centerthe
climbing and diving trimmerthen
restart the heli
1.motorhas droppe d off
2.gearhas loosened
1.reinstal
lthe motor
2.tighten the gear
CLOSE
CONTROLLE R UI
BACK
DC voltage
DIRECTIONAL
JOYSTICK
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
1 BUTTON
TAK E OFF
THROTTLE
AN D PITCH
LEFT / RIGHT
TRIM
1 BUTTO N LANDING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions : (1) this device may not cause harmful interference, and (2) this device
must accept any i nterference received, including interference that may cause
undesired operation.
FORWAR D /
BACKWARD
TRIM
Flight Controls
FORBIDDEN
Insertthe battery as in the picture and connec tthe pins together.
Insertthe battery as in the picture and connec tthe pins together.
WARNING
Insertthe battery as in the picture and connec tthe pins together.
Insertthe battery as in the picture and connec tthe pins together.
Turn On the racer
and controller
1).Ensure thatthe drone is switched off.
2). Slide the battery compartmen tdoo rbac k to unlock and swing open.
3). Insertthe battery as in the picture and connec tthe pins together.
Pivot
Left
1.
2.
1.
3.
2.
Pivot
Tilt
Right
Th e Controller
Up
Tilt
Forwar
ds
ADJUS T DEVICE
ANGLE
CHANG E LED
COLOUR
TAK E OF F /
LANDING
Insertthe battery as in the picture and connec tthe pins together.
Insertthe battery as in the picture and connec tthe pins together.
POWER
ON/OFF
CHANG E SKILL /
SPEE D LEVEL
DIRECTION
CONTROL
Tilt
Backw
ards
RECORD
VIDEO
SEE "ADJUSTING
TRIM
DEVIC E ATTACHMENT
RELEAS E PIN
Down
TAK E PHOTO
Insertin
g Controller Batteries
Throttle and Pivot
Downloa d an d instal
l the app
Bod y Kit
Tilt
Left
Right
Turn chec k markers
Insertthe battery as in the picture and connec tthe pins together.
Insertthe battery as in the picture and connec tthe pins together.
Turn
Left
Tilt
Right
AA 1.5V
+ AA 1.5V
AA 1.5V
QR
CODE
r are switched off.
1).Ensure thatthe drone an d controlle
2). Align the bod y kitpane lorshellwith the snap pins on the blade guard s orrollcage .
3). Apply a littl
e pressure untilthe pane lorbod y kitsnap firml
y into place.
Take Off
See "Set Up" to view
realtime video stream
See "App UI" to view record the
video stream
Turn Right
Tilt
Forwar
ds
Tilt
Backw
ards
Forwar
ds
Propellers
Backw
ards
r are switched off.
1).Ensure thatthe drone an d controlle
2). Unscre w and remov e the damadge d propeller.
3). Slide on the new propellerensuring itis the sam e as the one
removed.
4). Securely screw the new propellerin place.
Direction Joystick
Us e the corrisponding Q R cod e to downloa d an d instal
lthe releventapp.
Safey & Precautions
Start Engines
3.
THROTTL E AND
PIVO T JOYSTICK
r is switched off.
1).Ensure thatthe controlle
2). Unscre w the battery compartmen tdoo ron the underside ofthe
controlle
rand remove.
3). Insertthe battery the 3 x A A batterie
s (Notincluded)ensure the
+ and -corrispond.
4). Replac e and screw the battery doo rfirml
y bac k into the closed position.
Replacemen t Parts
Tilt
Left
Chequre d Flag Finish
FORBIDDEN
1.replace the main blade
2.charge the battery orreplace
itwith a full
y charge d battery
1.replace the main blade
2.replace the main frame
Playset Asembley
Insertthe battery as in the picture and connec tthe pins together.
Insertthe battery as in the picture and connec tthe pins together.
CAUTION
1.the blade has deformed
2.battery powe ris not
enough
1.main blade has deformed
2.main frame has deformed
OPE N OPEN
IMAGE S AN D VIDEO
Charg e the battery orreplace it
with a fullbattery
CLOSE
CONTROLLE R UI
CAN T REMEMBER
RECOR D VIDEO
Setup
Saftey
OPE N OPEN
IMAGE S AN D VIDEO
LED COLOUR
CHANGE
TAK E PICTURE
Battery Management
Itwon’tfly after itfalls
down
RECOR D VIDEO
Please pa y attention to the following
SOLUTIONS
After the battery is inserted Frequenc y adjusting between
remote an d receiver not
in the heli, indicator light
on receiver keep s flashing, successful
no respons e to operations
Navigation
3).
2).
CAUSE
Mai n moto r blade spins but
heliwon’tfly
CONTENTS
WARNING
Navigation
m ca n b e captured as both still
s or video via the controlle
r buttons or the Ap p UI.
1).the FP V strea
2). To startorstop recording video from the controlle
rsimply press the button indicated in the diagram below.
3). To startrecording from the ap p U Iope n the controlle
rand press the button as indicated in the diagram below.
3). Video and Image s can be accesse d via the ap p foldericon (indicate
d below )orfound in the devices camer a roll
wher e they can be viewd and shared onine.
OPEN
CONTROLLE R UI
1).Ensure thatthe drone is switched off.
2). Slide the battery compartmen tdoo rbac k to unlock and swing open.
3). Insertthe battery as in the picture and connec tthe pins together.
4). Swing closed and slide to lock the battery doo rfirml
y into the closed position.
USE R GUIDED
PROBLEM
2).
Connectin g the Lipo battery to the Dron e Racer
1).
Recording the Live video stream
1).Ensure thatthe drone is switched off.
2). Slide the device holderoverthe coloured antenna untilitclicks firml
y into place.
3). Fix yourdevice firml
y into place betwee n the spring loaded grips.
4). Adjustthe view angle to suityourpersona lpreference via the wheel
ensuring to tighten fully.
1).
LED Charging status
Trouble shooting
Set Up
Attaching the device to the controller
Conecting you r device to the RACER
Charging the Lipo dron e battery
DPR1401
Flight
Propeller Guards
The attached beginerpropellerguard s and bod y kitpanels are there to protectthe
drone from damadg e in the even tofan acciden tand as a saftey precaution to protect
others from the fastmovin g blades.
QR
CODE
The guard s should be kep ton whe n flyin
g in any public place.
4).
Should an expeirenced pilot wish to remov e them ,atthier ow n risk, forthe added
performanc e whilstflyin
g in an enclosed area awa y from others.
r are switched off.
1). Ensure thatthe drone an d controlle
2). Unscre w and remov e the propellerguard as indicated in the diagram.
Ensure thatthe drone is switched off.
Ensure thatthe drone is switched off.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be
handled pursuant to European directive 2012/19/EU in order to be recycled
or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys an new electrical or electronic equipment.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC RF exposure statement:
“FCC RF Radiation Exposure Statement Caution: To maintain compliance with
the FCC’s RF exposure guidelines, place the product at least 20cm from
nearby persons.” “The device must not be co-located or operating in conjunction
with any other antenna or transmitter.”
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.2-c063 53.351735, 2008/07/22-18:11:12
Instance ID                     : uuid:ef636c8f-5d1e-45f3-9c0f-7da9ac4a98f4
Document ID                     : xmp.did:F3A56ACC27B1E611B102CD93CA5820D0
Rendition Class                 : proof:pdf
Original Document ID            : uuid:6B583FFF-C92C-D106-0FAE-80A9E34ECD4D
Derived From Instance ID        : uuid:268f67c3-8df6-4ead-83e0-fcd9343dd1f1
Derived From Document ID        : xmp.did:F7A60793DAAAE611B1EC900D91531BB3
Derived From Original Document ID: uuid:6B583FFF-C92C-D106-0FAE-80A9E34ECD4D
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved
History Instance ID             : xmp.iid:7FBBAB647B9DE611A035EC1FB4180D6D, xmp.iid:F7A60793DAAAE611B1EC900D91531BB3, xmp.iid:F3A56ACC27B1E611B102CD93CA5820D0
History When                    : 2016:10:29 10:00:20+08:00, 2016:11:15 17:15:57+08:00, 2016:11:23 10:51:57+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows), Adobe Illustrator CS4
History Changed                 : /, /, /
Create Date                     : 2016:11:23 10:52:08+09:00
Modify Date                     : 2016:11:23 10:52:09+08:00
Creator Tool                    : Adobe Illustrator CS4
Metadata Date                   : 2016:11:23 10:52:09+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 120
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 13751 bytes, use -b option to extract)
Producer                        : Adobe PDF library 9.00
Trapped                         : false
Format                          : application/pdf
Title                           : 飞车说明书1123
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 3257.789551
Max Page Size H                 : 1512.400391
Max Page Size Unit              : Points
Font Name                       : Arial-BoldMT, ArialMT, TimesNewRomanPS-BoldMT, Helvetica-Bold, SpaceAge, Helvetica-Light, AppleSymbols, TT64E9BFA0tCID-WinCharSetFFFF-H
Font Family                     : Arial, Arial, Times New Roman, Helvetica Bold-GBpc-EUC-H, SpaceAge GBpc-EUC-H, Helvetica Light, AppleSymbols GBpc-EUC-H, TT64E9BFA0tCID WinCharSetFFFF-H-GBpc-EUC-H
Font Face                       : Bold, Regular, Bold, Bold-GBpc-EUC-H, GBpc-EUC-H, Light, GBpc-EUC-H, WinCharSetFFFF-H-GBpc-EUC-H
Font Type                       : Open Type, Open Type, Open Type, Unknown, Unknown, Unknown, Unknown, Unknown
Font Version                    : Version 5.08, Version 5.10, Version 5.07, Version 5.03, Version 5.03, Version 5.03, Version 5.03, Version 5.03
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : arialbd.ttf, arial.ttf, timesbd.ttf, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Page Count                      : 1
Creator                         : Adobe Illustrator CS4

EXIF Metadata provided by EXIF.tools