SHUOYING DIGITAL SCIENCE and TECHNOLOGY 138 Digital Camera User Manual CD2808 IB E0OF2 B0US

Download:
Mirror Download [FCC.gov]
Document ID	1322170
Application ID	78M738QnWvp5/fF82YhbpA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	49.24kB (615484 bits)
Date Submitted	2010-08-04 00:00:00
Date Available	2010-08-04 00:00:00
Creation Date	2010-07-09 10:35:24
Producing Software	QuarkXPress(R) 7.3
Document Lastmod	2010-08-02 19:45:12
Document Title	CD2808_IB_E0OF2_B0US.qxd
Document Creator	QuarkXPress(R) 7.3

KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
P/N: KSE138-IB-E0DQ1-B0US
IB Dim.: 150(W) x 210(H) mm
Real Digital Camera
Please read before operating this equipment.
Model: KSE138
FRONT COVER PAGE
7/9/10
10:35
KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
7/9/10
Preface
Thank you for your selection of this digital camera. Please carefully read the manual
before using it and put the manual in a safe place for reference in the future.
The content covered by this manual refers to the latest information available when it
was compiled. The screen display and illustrations, etc. in this manual are meant to
describe the operation of this digital camera more specifically and directly. Due to
differences in technical development and the production batch, they may be a little
different from the digital camera you have purchased.
Safety Precautions
General Precautions
• Generally, this product should not be used or put in any area that is dusty, dirty or sandy,
which could damage the components.
• Do not put the product in an environment with high temperatures. The high temperatures
will shorten the life of the electronic device, damage the battery and cause some
plastic parts to bend or melt.
• Do not keep the product in an area with low temperatures. If the product is kept in areas
with low temperatures, the inside of the camera may develop water condensation which
can damage the circuit when the temperature rises to normal levels.
• To avoid damage, do not open the camera case or attempt any unauthorized repairs.
• Do not drop or hit this product. Rough treatment will damage the internal components.
• Do not use abrasive chemicals or detergents to clean the product. Please use a wet soft
cloth to wipe it.
• The battery cover cannot be opened when shooting. If you open the cover, you cannot
store the current images and the stored data will be lost when the camera is turned off.
Precautions for LCD screen
If the LCD screen is cracked or damaged, please make sure that the liquid in the
screen doesn’t flow out. If this situation occurs, please take the following steps:
• If the liquid touches your skin, please use a clean cloth to wipe and then wash the
skin with plenty of clean water.
• If the liquid touches your eyes, please wash your eyes with clean water for at least
15 minutes and then see a doctor as soon as possible.
• If the liquid is accidentally swallowed, please gargle with clean water and then drink
a lot of water to force vomiting. Then see a doctor as soon as possible.
Operating Conditions
• The camera is designed to be used in temperatures ranging from 0 to 410 (32 to
104).
• The camera cannot be used or put in the following areas：
➢ Directly under the sun
➢ Damp or dusty areas
➢ Places exposed to extreme temperatures
➢ Do not leave in a closed vehicle, especially when under strong sunlight
➢ Areas with violent shaking
10:35
KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
7/9/10
Introduction to camera functions
The camera can be used to shoot photos and video episodes (without sound) with a
resolution of 640×480. You can select the shooting view through the full color LCD
display screen, which can also be used to browse the photos you have already.
The camera can be used as a removable disk/storage device — like a USB stick, it
can be plugged into computer to upload photos — and video camera (PC Camera)
after connecting to the computer (driver must be installed first) for uploading photos
and AVI short films to your computer. The PC Camera function can be used to
transfer network videos.
Main functions
Taking photos, shooting video (without sound), playback, PC Camera, Mass Storage.
System requirements
During the operation and application of the digital camera, please refer to the
minimum computer system requirement for the camera. We strongly suggest you use
a better computer device to operate the camera to achieve the best effect. The
minimum system requirements are as follows:
System requirement
Operating system Microsoft Windows 2000,7,XP,VISTA
CPU
RAM
Soundcard,
graphic card
Intel Pentium166MHz or above
128 MB or above
Sound card and graphic card support DirectX8 or
higher version
CD-ROM
Hard disk
Other
4 x speed or above
500 MB available space or above
USB 1.1 or USB 2.0 interface
Description of unit
Location of Controls
①—Shutter button ②—Viewing window ③—Lens ④—Previous button
⑤—Next button ⑥—Power/Mode button ⑦—Del button ⑧—LCD display screen
⑨—USB interface
10:35
KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
7/9/10
Function of the buttons
Buttons
Power/Mode
button
Shutter
button
Previous
button
Function in the shooting mode
Press the On/Off button to get
started. Press again to select Photo
mode or Video mode.
Press to start taking picture or
capturing video.
Press to change the photo or video
resolution.
Next button
Press to enter Playback mode.
Del button
N/A.
Function in the playback mode
Press to return to Photo or Video
mode.
N/A.
Press to return to the previous
photo or video.
Press to advance to the next
photo or video.
Press to delete the current photo
or video.
Installation of the driver
1. Operating systems supported by the driver
• Windows 2000
• Windows XP
• Windows 7
• Windows Vista
2. Installation of the driver
Start the computer and insert the driver CD.
The system will automatically run the installation program in the CD and the screen
will display the following window:
(If your CD-ROM has no automatic run function, please directly click the autorun.exe
program under the root directory in the CD and run it)
Click the “Install Driver” button and finish the installation according to the prompt.
10:35
KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
7/9/10
Connect the camera to an available USB port on the computer with a USB cable.
The system will locate the new device and its corresponding driver.
Note:
• Install the driver before connecting the camera to the computer.
• The driver has to be installed Windows 98 SE when using the Mass Storage
function. Windows XP and Vista can automatically identify the Mass Storage device
and no driver is needed.
• No matter which version of Windows you are running, the driver is needed when
using the PC Camera function.
• Please re-start the computer after installing the driver.
Basic operation
1. Installing the battery
• Open the battery compartment door on the bottom of unit by removing the
screw with a screwdriver (not included) and lift up.
• Insert four (4) “AA” size (1.5V x 4) batteries (not included) as per the polarity
marking inside the battery compartment.
• Replace the battery compartment door and screw.
Battery Precautions:
• Install batteries correctly observing the polarity (+,-) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from equipment when you are not going
to use the unit for a long time.
• Do not dispose of batteries in fire.
10:35
KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
7/9/10
2. Turning the Camera Power On and Off
Press Power/Mode button to switch on the camera.
Press Power/Mode button for two seconds to switch off the camera.
The camera will automatically turn off if there is no operation within 30 seconds.
3. Screen display of the Photo and Video mode
Icon
Description
Mode:
Battery indication:
Photo
Video
Battery Low
Battery Full
Photo number (Photo mode): Displays the remaining
number of photos that can be taken
Timer (Video mode): Displays the elapsed time for
video capture
Memory status:
Photos resolution:
FUL
Displays when the memory is full.
0.3M;
0.1M
4. Taking a Photo
Enter Photo mode, then press the shutter button to take a photo.
5. Recording
1. Press Power/Mode button to switch to Video mode.
2. Press the Shutter button to start recording, press the shutter button again to
stop recording.
6. Screen display in playback mode
Enter Photo mode, then press the shutter button to take a photo.
10:35
KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
7/9/10
Icon
Description
Playback mode: playback the photos or video
Battery indicator:
Battery Full
Battery Low
Serial number of the photos or video
Video playing timer
Prompt for no photo or video
Delete
Delete confirmation
Delete cancellation
7. Playback photos or videos
Switch on the camera: Press the Next button to enter Playback mode. Then press
the Previous or Next button to select the photos or videos. To play the selected
video, press the shutter button.
Deleting files: Press the Del button in Playback mode; the screen will display the
delete icon
; Press the left and right buttons to select
and . Then press the
Del button to confirm to delete the current photo or video. Press any button to
cancel the deletion.
After all the photos or videos files are deleted, the screen will display
Press the Power On/Off button to return to Photo mode.
8. Upload the photos or videos to the computer
To upload photos or videos: Connect the camera to the computer with the USB
cable to enter Removable Disk mode. The photos or videos can be uploaded to the
computer directly.
Note: The camera works best outdoors or in bright light.
Using the PC Camera function
1. Install the CD driver to the computer.
2. With the camera turned off, connect the USB cable to the computer while the
shutter button is pressed. A PC Cam icon will be displayed on the camera screen.
The camera will be set to PC Camera mode automatically.
3. Release the shutter button.
4. Open the start up menu on the computer and select "All Programs" then "Easy
Camera" then "PC Cam" to launch the PC Camera function. The PC Cam screen
will show the images captured by the camera.
10:35
KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
7/9/10
▲ Figure 1
Note: If PC Cam operation fails, connect to the computer again or try again by
re-starting the computer or camera.
Technical specifications
Image sensor
Main function
Lens
Focus scope
Sensor with 300K pixels
Taking photos, shooting videos, photo/video playback, removable
disk, PC camera
F2.8 f=5.4mm
120cm~infinite
Shutter
Electronic shutter
LCD display
0.95” CSTN LCD
screen
Photo resolution 640 480
Video resolution
QVGA 320 240
White balance
Automatic
Exposure
Automatic
File format
Video
AVI
Photos
JPEG
20fps
Memory
medium
USB interface
Mini USB1.1 interface
Power supply
4 x 1.5V “AA” alkaline batteries
16Mb SDRAM
10:35
KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
7/9/10
Trouble shooting guide
The camera cannot be
switched on
Blurry photos
Dark photos or videos
The camera automatically
switches off
The batteries are low or weak. Please replace with new
batteries.
The batteries are installed incorrectly. Please make sure
the polarity of the batteries are installed correctly.
Hand shakes when taking photos. Please hold the camera
steady with the hands or stabilize the camera with a tripod
or other flat surface. Never shake the camera when taking
photos.
The minimum focus range for this camera is 120 cm or
approximately 4 feet. If photos are taken closer than four
feet from the subject, they will appear blurry. Please be
sure that the distance from the subject is greater than 4
feet before taking photos.
The light is insufficient in the recording environment.
Please make sure there is enough ambient light or turn on
room lights before taking photos or shooting videos.
If there is no operation for 30 seconds, the camera will
automatically perform the power saving function and turn
off the power.
The batteries are low or weak. Please replace with new
batteries.
10:35
KSE138_IB_E0DQ1_A0US_R5.qxd:CD2808_IB_E0OF2_B0US.qxd
7/9/10
FCC INFORMATION:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
USER INFORMATION:
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The USB extended cable with ferrite ring is designed for exclusive use with this
product. Don't use others for this product.
Designed and Licensed by Kids Station Toys Incorporated.
PO Box: 694660 Miami, Florida 33269-4660
Kids Station Toys Incorporated. All Rights Reserved.
1-888-321-7191
Sesame Workshop ®, Sesame Street ® and
associated characters, trademarks and design
elements are owned and licensed by
Sesame Workshop. © 2010 Sesame Workshop.
All Rights Reserved.
Printed in China
BACK COVER PAGE
KSE138-IB-E0DQ1-A0US
10:35

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2010:07:09 10:35:24Z
Creator Tool                    : QuarkXPress(R) 7.3
Modify Date                     : 2010:08:02 19:45:12+08:00
Metadata Date                   : 2010:08:02 19:45:12+08:00
Thumbnail Width                 : 220
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 15936 bytes, use -b option to extract)
Producer                        : QuarkXPress(R) 7.3
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Format                          : application/pdf
Title                           : CD2808_IB_E0OF2_B0US.qxd
Document ID                     : uuid:293b36f7-d65a-4fb6-9120-b3ccd17281c4
Instance ID                     : uuid:fed3ffc2-7115-490e-bc79-a99d86b5d9e6
Rendition Class                 : proof:pdf
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 126.166631
Max Page Size H                 : 171.166641
Max Page Size Unit              : Millimeters
Font Name                       : Helvetica-Condensed, Courier, Helvetica-Bold, Helvetica
Font Family                     : Helvetica Condensed, CourierPS, Helvetica, Helvetica
Font Face                       : Condensed, Regular, Bold, Regular
Font Type                       : Unknown, TrueType, TrueType, TrueType
Font Version                    : Version 3.12, Version 1.3 (Hewlett-Packard), Version 1.3 (Hewlett-Packard), Version 1.3 (Hewlett-Packard)
Font Composite                  : False, False, False, False
Font File Name                  : simsun.ttc, cpsr45w.ttf, helr65w.ttf, helr45w.ttf
Plate Names                     : Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Has XFA                         : No
Page Count                      : 10
Creator                         : QuarkXPress(R) 7.3

EXIF Metadata provided by EXIF.tools