SHUOYING DIGITAL SCIENCE and TECHNOLOGY DV111SMP DIGITAL CAMERA User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1407564
Application ID	Mmx3FRJswEwHs+Kl236zBQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.91kB (586315 bits)
Date Submitted	2011-01-21 00:00:00
Date Available	2011-01-21 00:00:00
Creation Date	2011-01-13 18:23:44
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2011-01-13 18:23:44
Document Title	Microsoft Word - 401# 402# 111SMP说明书HDV141 Instruction Manual11111.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	TOBY 808

Table of Contents:
FCC Pa r t …………………………………………………………………. ……………………. 2
Know your camera……………………………………………………………………………3
Start to use……………………………………………………………………………………...5
Install Battery……………………………………………………..….…………………….5
Use SD Card…………………………………………………….………………..………..5
Selecting Lens Mode…
……………………………………………..……………………..6
Turning the camera ON and OFF…
…………………………………………………….7
Selecting the MODE of the camera…
……………………………………………………7
Setting Date and Time ………………………………………………………………....7
Indicators / LED lights…
………………………………………………………………….....8
Video Recording mode…
……………………………………………………………………9
Camera mode…
………………………………………………..…………………………..11
Playback mode…
……… …… …… ……… …… …… ……… …… …… ……… …… …..13
Internal Setting of the camera…
………………………………………………………………17
Setting the Start-up Image…
……………………………………………………….……18
Changing the Start-up Image………………………………………………………..18
Connecting camera to the computer ………………………………………..…………19
Installing the ArcSoft MediaImpression program…
………………….…………………19
Using camera with the computer…
………………………………………………….….21
Uploading your video clips to YouTube…
……………………………………………..21
Connecting camera toTV … … … … … … … … … … … … … . … … … … … . . … … … … 2 5
Technical Specifications……………………………….…………………………………26
S ystem requirements……………………………….…………………………………..…27
HDV141
FCC part 15.21
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC part 15.105
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected
Consult the dealer or an experienced radio TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Pertinent testing documentation is available for verification.
Know your camera
Lens
Lens selector
Shutter key
Busy light
Power key
OK button
Direction keys:
Up
Down
Right/ LED switch
Left/ Self timer
Mode key
Battery cover
10
Speaker
11
Wrist strap loop
12
Wrist strap hole
13
Zoom in key
14
Zoom out key
15
USB/TV out port
16
LED light
17
Self timer indicator
18
Tripod socket
19
SD card slot
20
LCD Screen
20
Start to use
NOTE: Please insert three fresh AAA batteries and SD/SDHC memory card to
operate the camera
1. Installing Batteries
1. Press the top and slide down the Battery Cover.
2. Insert three fresh AAA alkaline batteries; align polarity of terminals correctly.
Keep the black ribbon placed under installed batteries; pulling that ribbon later will
help remove exhausted batteries.
3. Slide up the Battery Cover to close the battery compartment.
2. Using SD Card
You must insert and use SD memory card; camera will store all recorded images
and video on the card. Camera accepts SD card with up to 8GB capacity.
Note that the card has a tiny “LOCK” slider located on the side.
Set this slider to “non-LOCK” position before inserting and taking video or still images.
1. Push the SD card carefully into the slot until the card is completely inserted.
2. To remove / replace the card, lightly press / release inserted card to eject the card.
3. The SD card has to be formatted first: Press OK button and then press Right
Direction key to enter Setup Menu. Press Up and Down Direction key to select ‘Format’
option. Press Right Direction key and then press Up or Down Direction key to select ‘Yes’
option. The memory card will be formatted automatically.
Please note that all DATA stored on SD card will be deleted during formatting.
3. Selecting Lens Mode
or Macro
Slide the Lens Selector to Normal
distance between the main subject and the camera.
1. Use Normal setting
position depending on the
for shooting subjects located 5 feet or more away from the
camera
2. Use Macro setting
for shooting close-up subjects that are just 6” – 10” from
camera
4. Turning the camera ON and OFF
1. Power ON: press the Power key for a second or two to turn the camera ON.
2. Power OFF: when the camera is active press the Power key to turn the power OFF.
Auto Power OFF: the camera will turn OFF automatically when has been unused for
1 minute. The Auto Power OFF delay time may be set at 1, 3 or 5 minutes.
Go to Setup Mode / Power Save and make adjustment if necessary (see also
Section 11 Setup the camera).
3. Low Power Indicator: When the batteries become exhausted, the LCD display will
display low battery icon
and the camera will be automatically turned OFF.
Replace exhausted batteries.
5. Selecting the MODE of the camera
When powered ON, the camera is set in Video recording mode.
Press the MODE key to change or select desired mode as follows:
Video (default mode) – recording video clips
Camera mode – taking still photos, images
Playback mode – playing back recorded video
or displaying still photos
6. Setting Date and Time:
This option will help you identify “when” your images have been taken. This information
will be added to “Properties” of each image and you can retrieve it using computer when
camera is connected, or after images are downloaded into computer.
Setting:
Press the OK button then press Right Direction key to enter Setup Menu. Press Up and
Down Direction key to select ‘Date & Time’ option then press Right Direction key and the
Date and Time will be displayed on the LCD screen, see below:
To set the Date and Time, use the Direction key: Up or Down to adjust, Right key to move
the cursor. Press OK button to confirm setting and press it again to Exit setup mode.
To leave the Date and Time unaltered, press Left then OK key to Exit the Setup mode.
Note that removing or replacing batteries may reset Data / Time setting; repeat setting if
required.
7. Indicators / LED lights:
Busy light - the light will turn on when the camera is “busy” recording video, capturing
photo, processing data, or being connected to computer.
LED light – this supporting light may be used when recording video/ pictures in dark
environment. Please note that this lamp is effective for short distances only.
Self Timer light – indicates that the camera Self Timer has been activated.
8. Video Recording mode:
Preview mode
Video resolution; set at 640x480 pixels
Video Recording Icon
The remaining time for recorded
Video; ex 1 minute 8 seconds left
Zoom ratio range
SD card icon; card inserted
Battery icon
The LED Lamp is turned ON
Recording the Video clip
1. Open the LCD screen.
2.
3.
4.
5.
Press / hold the Power key and turn the camera ON
Press the Shutter key to start recording video
To stop recording, press the Shutter key again.
Note that camera will auto-stop recording when the SD memory card is full.
You may press Zoom IN / OUT buttons during recording to select desired
zoom range.
•
The LCD screen acts as a viewfinder to help you more accurately point at and center the
main subject or person while recording.
Setting the resolution for recorded Video
1.
2.
3.
4.
Press OK button to open the menu.
Press Up or Down Direction key and select ‘Movie Size’ option.
Press Right Direction key entering setting
Press Up or Down Direction key to select the required resolution setting: HD:1280 x
720, VGA: 640 x 480 or QVGA: 320 x 240pixels.
10
5.
Press OK button to confirm your selection then press OK button to exit the menu.
9. Camera mode:
Preview mode
Image resolution mode
Exposure Value
Self timer mode icon
Image counter
Camera Mode icon
Zoom ratio range
SD card icon; card inserted
10
Self timer counter; photo
Will be taken after 10 sec
Battery icon
LED light icon
Shooting Photos
1. Open the LCD screen and press / hold the Power key to turn camera ON
2. Press the Mode key once to select the Camera mode
3. Aim and observe the scene on the LCD screen and press the Shutter key to take a
picture.
11
Setting the resolution for taken photo
1.
2.
3.
4.
5.
Press OK button to open the menu.
Press Up or Down Direction key to select ‘Resolution’ option.
Press Right Direction key.
Press Up or Down Direction key to select the required resolution from available options
shown: 5 Megapixel, 3 Megapixel or 1.3 Megapixel.
Press OK button to confirm the selection and press OK button to exit menu.
Self Timer
Press the Left direction key and a ’10 sec delay self timer’ icon will appear on LCD screen.
Press the Shutter key; camera will beep for 10 seconds and Self Timer will then take
one photo automatically.
Press the Left direction key to exit Self timer mode setting.
Taking three continuous photos:
Press OK button to open the menu then scroll down and select ‘Driver Mode.
Press the Right key to enter sub-selection and scroll down to select ‘Burst’ option.
Press OK button to exit the menu. A Burst mode icon will appear on LCD screen.
Press the Shutter key and camera will auto-take three photos consecutively.
Press the Left Direction key to exit Burst mode setting.
12
Taking photo with special effect
1.
2.
3.
4.
5.
Press OK button to open the menu.
Press Up or Down Direction key to select ‘Effect’ option.
Press Right Direction key.
Press Up or Down Direction key to select the required effect: Normal; B&W (Black and
White); Sepia, Negative, Red, Green, Blue.
Press OK button to confirm the selection and press OK button to exit the menu.
10. Playback mode:
1. Press / hold the Power key to turn the camera ON
2. Press the Mode key twice to select the Playback mode; LCD screen will display
last photo taken, or recorded video.
Corresponding icons will identify records as shown below:
Playback
Video
Photo
You can select photos or video by pressing Left / Right direction key; press the Shutter
key for playing / stopping recorded video.
13
You can also Zoom In / Out displayed photo by pressing the Zoom keys.
After Zooming In you may press Left or Right direction key to enter into the “Pan” mode
and view selected area of the image. Press the OK button to resume normal preview.
Additional Playback options
Select the Playback mode and press OK button to enter menu and you may choose
among several available options:
For photo and video records:
Lock: You can Lock / Unlock the photo / video currently displayed file
Delete: You can Delete One or All files recorded stored on the SD card
For photo records only:
Slide Show: You can setup and activate the Slide Show
Effect: You can create Special Effect for displayed photo
Rotate: You can rotate the photo 90 degrees clockwise
Resize: You can lower the resolution of photo
Voice Memo: You can add / delete voice record for displayed photo
Start-up Image: You can select one stored photo and set it as the Start-up Image
on camera LCD screen.
Note: Press OK key to execute the command and exit the Additional Option setting.
14
Thumbnail mode
•
•
In PLAYBACK mode, press Zoom Out Key to select the “Thumbnail” format.
Press UP, DOWN, LEFT or RIGHT buttons to browse through images, then
press OK (center button) to select image for an instant review.
•
Press Zoom In Key to enlarge and view image in full resolution.
•
Press Zoom Out Key to return to normal screen size and press same key
again returning to “Thumbnail” format.
The Thumbnail icons (visible on the LCD screen) will identify files as follows:
Icon indicates recorded Video (AVI file)
Icon indicates still photo (JPG file) with added voice Memo
“No icon” is displayed on still photos
15
Adding the Voice memo for selected photo
1.
Switch the camera to Playback mode.
2.
Browse to the photo you wish to add voice memo.
3.
Press OK button and select ‘Voice Memo’ option by pressing Up or Down
Direction key
4.
Press Right Direction key and enter sub-menu options
5.
Scroll down and select the “Add” option; press OK key to confirm
6.
Counter appears on the LCD screen and camera is ready for recording voice
memo.
7.
Speak your memo / message and the camera microphone will record the
message.
8.
Press OK button again to stop recording voice memo.
Note that the maximum time of recorded “memo” is limited to 30 seconds.
Playing back the Photo / Memo file
Select the photo with indicated voice Memo icon (Playback mode), see other
corresponding icons:
16
1
Playback mode icon 2 Image counter
PHOTO file indicator 5 Playing time
3 Voice Memo indicator
Control panel for playing voice memo
Press the Shutter key to start playing the voice Memo of the photo (with added
voice memo), or press OK key to stop playing.
Use the UP key to pause / resume playing the voice Memo if desired.
11. Internal Setting of the camera
1. Press OK button; then press Right Direction key to enter the Internal Setup Menu
(see the “tools” icon).
2. The following Options are displayed on the Setup Menu.
Use the Up or Down Direction key to scroll / select desired option and press the Right
key to enter following internal settings:
Sound: You may turn sound On / Off. This includes sound emitted when tripping
Shutter, Start-up, Beep sound (with any button is pressed) and self timer Beep sound.
You may also change the Volume of audio sound.
Power Frequency: You may also alter the Frequency setting of camera so that it
adapts to match power supply and indoor fluorescent lamp at 60Hz.
Power Save: Select desired auto Power turn Off at 1, 3 or 5 minutes.
Date & Time: Set up the date and time (see Section 6: Setting Date and Time).
Language: Change the menu setting in different languages.
TV Out: Change the TV output to suit your NTSC television system.
Start-up Image: You can Disable, reset the Default start-up Image or set your own
17
taken image / photo as the Start-up Image.
Format: Format the SD/MMC card (see Section 2: Using the SD Card).
Reset all: Reset all the options to default values (manufacturer’s setting).
Setting the Start-up Image:
1.
Select Playback mode and select a photo to be set as the “Start-up Image”
2.
Press OK key and use Up / Down keys to select ”Start-up Image” option and
press OK key
3.
Press Right Direction key and a sub-menu appears on LCD screen
4.
Press Up / Down keys and select “Set” option; press OK button to confirm.
The sub-menu disappears and camera displays and “memorizes” the photo
you have selected.
5.
Press OK key, then the Right direction key entering Internal Setting Menu
Use Up / Down keys and scroll / select the “Start-up Image” option
Press Right Direction key to enter the sub-menu and use Up or Down
Direction key to select “My Image.” Press OK key to execute setting.
8.
Press OK button again to exit Internal Set-up.
After that, every time the power is turned ON the camera screen will display your
selected photo as the Start-up Image.
Changing the Start-up Image
You can activate camera Internal Setting and scroll / select “Start-up Image” mode,
then press the Right direction key to enter available settings.
Select your preferences as below:
18
Off – Only the “blank” screen will be displayed during turning camera ON.
System – The Default Image will be displayed as the Start-up Image
My Image – Camera will use your selected photo as the Start-up Image.
Note that if you select and execute the “Reset All” (from Internal Setting) option, this
will also activate the Default Start-up Image according to manufacturer’s setting.
Connecting camera to the computer
Your personal computer (with typical programs installed) should be able to play back
photos and recorded video from camera – when it is connected.
However we do suggest you install software from supplied CD before connecting camera
to the computer; see simple instruction steps bellow.
1. Installing the ArcSoft MediaImpression program
Insert supplied CD into computer CD-ROM drive.
The auto-run screen will appear. Click “Install MediaImpression”
19
（If the screen does not appear as the auto-run, please click on SoftwareInstaller.exe under
the CD-ROM drive icon on the computer.）
Follow on-screen instructions and complete installation.
20
21
After installation, please restart the computer.
2. Using camera with the computer
- Use the supplied USB cable and connect camera to the computer, open camera screen
and turn the power ON.
- Open “My Computer,” then select the Removable Disc. Usually, the highest nomination
(indicated by alphabetic letters) of the Removable Disc will identify your connected
camera.
- Click open the Removable Disc then open the DCIM and 100MEDIA folder; this folder
will contain all your video records and photos.
- You may “click open” selected file to review video of photos.
- You may also “download” all, or single photos, video and “drag” or store them in
selected location as usually you do with all other files.
3. Uploading your video clips to YouTube
Installed ArcSoft MediaImpression program gives you easy access to the YouTube; please
follow next simple steps.
Double click the
icon on the desktop or follow “Start → Programs” to open:
MediaImpression
22
After starting MediaImpression, click “Import” to import the media.
23
Choose the video camera storage and choose the output location.
Choose require file and click the import, selected file will be stored in the output location.
24
Click “Go to start page” to return the main screen, click the “Video” or “All media” to use
the “YouTube” function.
Choose file and click the “upload to YouTube”.
25
Enter your YouTube username and password to login and execute uploading video.
Connecting camera toTV
You may also display all photos and recorded video on typical TV set.
1. Use AV cable (supplied with camera) and connect camera with TV.
2. Plug single-connector of the cable into camcorder’s TV port, and connect
double-connectors to Video (yellow) and Audio (red or white) input jacks of your TV.
3. Turn the TV and camera ON.
4. Select mode of your TV to VIDEO INPUT (see your TV Manual if it is required).
5. Set camera at the Playback mode then you can select, playback, review all your
records on TV screen.
Enjoy the show!
26
Technical Specifications
Video resolution
720P: 1280x720 pixels, VGA: 640x480 pixels, QVGA: 320×240 pixels
Picture resolution
1.3,
Lens
F3.1 f=6.5mm
Focus settings
Digital zoom
Normal: 5 feet ~ infinity;
4×
LCD display screen
1.8〞TFT color LCD screen
Memory card support
SD Memory card, up to 8GB capacity (Memory Card not supplied)
Video storage
VGA: Up to 7 hours approximately with 8GB SD/MMC card
Still Image storage
VGA (640 x 480): over 40,000 pictures (with 8GB SD/MMC card)
Self- timer
2 second / 10 second delay
Exposure
Automatic/ manual (-2.0EV~+2.0EV, 0.3EV/step)
Function modes
Video Recording, Still photo, Playback
File format
Video: AVI
White balance
Auto
USB interface
USB 2.0 interface
TV out put
NTSC or PAL, selectable
Power supply
Battery: 3×AAA alkaline 1.5V
Dimensions (L×W×H)
3.9 x 2.2 x 1.5 inches (98x56x39 mm)
Weight
3.5oz(100 grams) - excluding batteries
3 and 5 Megapixel
Macro: 6” – 10”
Photo: JPG
27
(Batteries not supplied)
System requirements
System Requirements
Operating System
Microsoft Windows XP, Vista, 7
Central Processing unit
Intel Pentium III 1GHz or CPU of equal or higher performance
Memory
512 MB or higher
Sound Card, Display Card
The sound card and the display card shall support DirectX8 or higher
version.
CD Driver
16 times speed or above
Hard Disk
Available space 1 GB or more
Other
One standard USB 1.1 or USB 2.0 interface
Please note that older or slower computers may not playback recorded video correctly
(especially those recorded in High Definition format).
28

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:01:13 18:23:44+08:00
Create Date                     : 2011:01:13 18:23:44+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 401# 402# 111SMP说明书HDV141 Instruction Manual11111.doc
Creator                         : TOBY 808
Document ID                     : uuid:9d93d32d-2457-4501-aa23-326174a6a084
Instance ID                     : uuid:70473032-9bdb-4e84-a8c3-4bc14b68102f
Page Count                      : 29
Author                          : TOBY 808

EXIF Metadata provided by EXIF.tools