SHUOYING DIGITAL SCIENCE and TECHNOLOGY DVT5201 Digital Video Recorder User Manual Manual

SHUOYING DIGITAL SCIENCE&TECHNOLOGY;(CHINA)Co.,Ltd Digital Video Recorder Manual

Manual.pdf

Your camera has different modes for the various camerafunctions.You can switch modes by pressing the HOME button onyour camera after the camera has been powered ON. Use this mode to capture photos with your digital camera.After powering on your camera, press the HOME button once to open the home page and then tap the camera icon to open the Photo Capture mode.To take a photo, aim your camera as desired and press the “Shutter” button or tap the visual area of the touch screen. The photo will be automatically saved to the memory card.To access the various menus for the Photo Capture mode, press the MENU button or tap the MENU icon which is at the lower leftcorner of the touch screen while in the Photo Capture mode.For more information , please refer to the camera’s User manual in the software or online.Use this mode to view and manage the photos and videos onyour camera.After powering on your camcorder, press the HOME button to open the home page and then tap the PLAYBACK icon to open Playback mode.You can swipe left/right on the touch screen to scroll through the videos and photos that you captured with your camcorder to view or delete as desired.To access the various menus for the Playback mode for videos and photos, press the MENU icon and other icons which aredisplayed on the LCD. For more information, please refer to the camera’s User Manual in the software or online.Use this mode to capture videos with your digital camcorder.This is the default mode when your camera is powered ON. To take a video, aim your camera as desired and press the “Shutter” button or tap the visual area of the touch screen to start the recording. A red recording indicator will appear while the recording is in progress .To stop the recording, press the “Shutter” button or tap the visual area of the touch screen again .The video will be automatically saved to the memory card.To access the various menus for the Video Capture mode, press the MENU button or tap the Menu icon which is at the lower left corner of the touch screen while in the Video Capture mode. For more information, please refer to the camera’s User Manual in the software or online.Micro SD Memory Card not included4.Wrist Strap5.Built-in Lithium Battery not shown1.Digital Camcorder2.USB Cable3.Installation CD Photo Capture ModePlayback Mode (Photos & Videos)Accessing the menuSelecting the modesTurning on the cameraTurning on and using the camcorderThis is a built-in lithium battery device.Charging the batteries Installing memory card1234 1. T/Zoom in button 2. W/Zoom out button 3. Lens 4. LED Flash 5. Microphone 6. Speaker 7. Shutter photo/video button 9. Micor SD card slot10. Reset Button11. USB Interface12. Power on /off button13. HOME Button14. Menu Button15. Wrist strap connector 8. LCD touch screen Inital Camera Setup2. You will first be prompted to select a language. · Touch the LCD screen and slide your finger up or down on the screen to scroll and select the desired language. · Tap an option on the LCD screen to select it. · Tap SAVE & EXIT to confirm and save your selection.3. After selecting the language, you will be asked if you would like to continue with the setup or exit.· Tap ‘Yes’ if you would like to set the date, time and ViviLink option.· Tap ‘No’ if you would like to exit the setup. Note: If you select ‘No’ and decide to leave the setup, the settings can be adjusted at any time by pressing the HOME button and then tapping the ‘Setup’ icon.4. If you have chosen to continue with the setup, the next step is to set the camcorder’s date and time.· Tap the triangle button above or below the fields in the screen to increase or decrease the hour, minutes, days, months, etc.· Once you have set the date and time as desired, tap SAVE & EXIT to confirm the setting and continue to the next part of the setup.5. The next step is to select your default ViviLink destination.· ViviLink enables you to select your favorite web sharing site for a one click upload. Note: If you do not want to use this feature, you can select ‘None’ as the ViviLink option.· First select the ViviLink social network for your photos. Touch the LCD screen and slide your finger up or down on the screen to scroll and select the desired ViviLink for photos. Tap SAVE & EXIT to confirm your selection and continue to the next part of the setup.· Then select the ViviLink social network for your videos. Touch the LCD screen and slide your finger up or down on the screen to scroll and select the desired ViviLink for videos. Tap SAVE & EXIT to confirm your selection.6. Congratulations! This completes your initial setup. Remember: This is a onetime setup and you will not be prompted to determine these settings again. If you would like to change any of these settings you can do so by going to HOME >> Setup.1. Power on your camcorder (first time only).Class 4 or higher Micro SD Memory card (up to 32GB)needed for normal use9 10 11 12 13 14 15Video Capture Mode

Navigation menu