SHUOYING SY1310002 Digital Video Camera User Manual manual
SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. Digital Video Camera manual
SHUOYING >
User Manual
Foreword Thank you for purchasing this digital video camera. Before use, please read this user manual carefully and keep it in a safe and convenient place for future reference where necessary. The information contained in this manual is the latest for the camera when it is compiled. The screen displays and illustrations in this manual are used to specifically and vividly describe how to operate the camera. Due to technical development and different production batch, they may be somewhat different from the actual digital video camera you purchase. Notice Please use this camera according to the following order: Check power supply Install driver Insert and format memory card Record/ Capture Connect PC Note: The memory card newly purchased or used on other digital cameras must be formatted before its use on this camera. Before formatting, please back up the important data on other media such as floppy disk, HD and CD etc. Use Notice This camera has no NAND FLASH internal memory. Use memory card for actual use. This camera can use SD memory card and MMC card (multimedia memory card). The SD card has write-protect switch, which can prevent deleting or formatting the image files. Memory card pin Write-protect switch Push the switch on the SD memory card to the bottom, then the data on it can be protected; push the switch on the SD memory card to the top, then the data on it will lose protection. Before shooting, please remember push the switch on it to the top. Notices for memory card use ● When a newly purchased memory card is used or the camera cannot identify the data or other images taken by other cameras on the memory card, please firstly format it. ● Before inserting or taking out the memory card, please power off the camera. ● The memory card, after used for many times, will have lowered performance. If the memory card has low performance, it is necessary to buy a new memory card. ● The memory card is precise electronic device; so do not bend, fall or press it. ● Never place the memory card in the environment with strong electric field or magnetic field, such as close to speaker or TV receiver. ● Never use or place the memory card in the too hot or cold environment. ● Please keep the memory card clean and prevent it touching with any liquid. If it touches any liquid, please wipe it dry. ● When the memory card is not used, please place it into the sheath. ● Please note that the memory card will become hot for long use. This case is normal. ● Do not use the memory card that has been used on other digital cameras. To use it on this camera, please format it. ● Do not use the memory card that has been formatted on other digital cameras or memory card readers. ● In any of the following cases, the data recorded may be damaged: - When the memory card is not used properly; - When the power supply is shut off or the memory card is taken out during recording, deletion (formatting) or reading. ● It is recommended to back up important data on other media such as floppy disk, hard disk and CD etc. Maintenance and Care When leaving the camera idle for long, keep the digital video camera with the battery taken out in dry and dark place. ● In use, always wear the wrist band so as to prevent slip. ● Use proper protection sheath to avoid scratching the lens and screen. ●To clean the lens, firstly blow away the dust on its surface, then use proper cloth or tissue for optical devices to clean the lens. If necessary, use lens cleanser. Never use organic cleanser to clean the digital video camera. ● Do not touch the lens surface with finger. Table of Contents System Requirements…………………………………………………………………4 Features…………………………………………………………………………………4 Accessories………………………………………………………………………………4 Profile…………………………………………………………………………………5 Functions of Keys and Indicator Lamps………………………………………………6 Start to Use………………………………………………………………………………6 Install Battery………………………………………………………………………6 Install SD/MMC Card………………………………………………………………7 Open Screen………………………………………………………………………8 Power on……………………………………………………………………………8 Select Focus………………………………………………………………………8 Switch Modes………………………………………………………………………8 Record………………………………………………………………………………8 Capture……………………………………………………………………………8 Playback……………………………………………………………………………8 Power off……………………………………………………………………………8 Set Date/Time……………………………………………………………………8 Menu Settings………………………………………………………………………8 Set Date/Time………………………………………………………………………9 Connect to PC……………………………………………………………………10 Operation Step by Step………………………………………………………………10 Record Mode……………………………………………………………………10 Capture Mode……………………………………………………………………14 Playback Mode…………………………………………………………………14 Connect PC to Download Photos/Videos………………………………………20 Use PC Camera Function………………………………………………………20 Install Driver and Software……………………………………………………………21 Installation Interface………………………………………………………………21 Install Driver………………………………………………………………………22 Install Software Attached free of Charge………………………………………22 Specifications…………………………………………………………………………24 Troubleshooting………………………………………………………………………25 System Requirements When operating or using this digital video camera, please refer to minimum system requirements of PC for this camera. We strongly recommend you to use good PC to operate the camera in order to bring its performance into full play. The minimum system requirements are as follows: System Requirements OS Microsoft Windows 98 SE,Me,2000,XP,VISTA CPU Intel PIII667 above or equivalent CPU Internal memory 128 MB above Sound card, display DirectX8 or above supported card CD-ROM 4x speed above HD 1 GB above Others One standard USB 1.1 or USB 2.0 interface Features This camera has multiple characteristics and functions: Digital video camera; Digital camera (1.30mega pixels); Mass Storage; PC camera; 4x digital zoom. Accessories The packing list contains the following main accessories: USB cable Installation CD Wrist strip User manual TV cable Note: The USB extended cable with ferrite bead and the TV cable extended cable with ferrite ring is designed for exclusive use with this product. Don’t use others for this product. Profile Macro switch Shutter key T key Speaker W key Mode key Menu key Playback key Power key Battery cover BUSY lamp USB port AV output port Wrist strip sport Lens LED fill light Up key Microphone Self-timer indicator lamp OK key Down key Card slot Cover Tripod jack Display Display Functions of keys and indicator lamps: Keys/Indicator Lamps Power key Shutter key T key W key Menu key Mode key Playback key Up key Down key OK key BUSY lamp Self timer indicator lamp Macro switch Functions Power on/off. Record, capture. Digital zoom enlargement, zoom in (playback); select and move photos rightward. Digital zoom reduction, zoom out (playback); select and move photos leftward. Menu on/off. Switch modes (capture/record) Enter/exit playback mode. Select files and menus; switch capture modes (continuous/self-timer/single), move photos (when @ zoom-out); records/pauses. Select files and menus; switch capture modes (continuous/self-timer/single), move photos (when @zoom-out); turns on/off LED fill light. Confirm, play and switch screen display states. Busy work. Flashing indication during self timer countdown. Switch between macro mode and normal mode. Start to Use Install battery This camera uses 3pcs of AAA battery. To replace the battery, it is necessary to power the camera off. As indicated in the following photos, open the battery cover, install the battery in according to the polarity indication then restore the battery cover. Install SD/MMC Card As indicated in the following figure, according to the hint beside the card slot, insert the SD/MMC card with the metal pin inward into the memory card slot. To take out SD/MMC card, press it downward. ────────────────────────────────────────────────── Note: Before replacing the memory card, be sure to power off the camera. Insert the card in the direction as indicated. Do not impose much force on it to avoid damaging the card or camera components. If it does not work, please check if the direction is correct. If the memory card is used for the first time or it has been used on other cameras, it is necessary to format it. ────────────────────────────────────────────────── Open Screen Unfold the LCD screen outward and then turn it toward the user. Power on Push the power key of the camera for 2s to power it on. Select Focus Press the macro switch to adjust the focus as Normal ( ) or Macro ( ). Switch Modes After power-on, the camera can enter the record mode. Press the mode to switch between record mode and capture mode. Record In record mode press the shutter key to start recording and again to stop. During recording, press the up key to pause, again to continue. Capture In capture mode, press the shutter key to take photos. Playback In playback mode, you can browse photos and play the videos recorded with this camera. Browse photos: Press the up/down key to search the desired photo and press the T key to zoom in photos. After zoom-in, press the up/down/T/W key to move the photo; press the OK key to exit. Play movies: Press the up/down key to search the desired movie, press the OK key to start to play, again to stop, during play, press the up key to pause; press the up key again to continue. ᖿ䖯 ! !! Power off ᜶䖯 ˉˉˉ| In power-on state, press the power key to power off the camera. If the camera is in idle state for more than the set power-off time (1min/3min/5min), the camera will automatically power off in order to save power. ䷇䞣 ˉˉˉ|ˉˉ Menu Settings In capture, record and playback mode, press the menu key to open the desired menu, and press T/W key to switch between Record menu and Setting menu. Press the up/down key to choose the desired menu options and press the OK key or T key to enter the desired submenu and then press OK key to confirm. If selected, the menu will have a blue background. ▲Record menu ▲Setting menu ▲Capture menu ▲Playback menu Set Date/Time Press the menu key to open the desired menu, then press the T key to enter menu settings. Press the down key to choose the desired "Date/Time" menu option, press the OK key again to enter the setting window. In the setting menu, press the T key or the W key to choose the desired option (date, time or date format). The chosen option will have a blue background. Then press the up or down key to adjust the chosen option. After adjustment, press the OK to confirm or press the menu key to cancel setting and back. Finally, press the menu key to exit from the setting mode. Connect PC Before connecting PC, please firstly install driver with the installation CD attached. First power on the camera, enter the Setting menu and set USB mode as movable MSDC or PCCAM. Connect the camera with the USB cable attached to the useable USB port of PC, and then the camera will accordingly enter the removable disk or PC camera mode. Operation Step by Step Record mode After powering on the camera, enter the record mode. Move the macro switch to Normal ( ) or Macro ( ) to choose the desired focus. Macro switch position Focus range Normal˄ ˅ 140cm~infinite Macro˄ ˅ 15cm~25cm Press the shutter key to start recording and again to stop. During record, press Up key to pause and after pause, press Up key to continue. Press T key of W key to have digital zoom change. Press Down key to turn on/off the LED fill light. (After the playback mode is entered, the fill light cannot be used.) In idle state, press the OK key to switch between these three screen display states among Turn off Icons, Close Screen and Normally Display. ƹScreen display information in record mode 10 Icon Icon name Description Indicate the current battery state. When it is in read, it indicates the battery is used up and the camera will power off automatically. Battery Indicate that the record mode is chosen. Indicate the current white balance setting. Video Mode White balance Metering mode Movie size Record time Card Indicate the video resolution at present. In idle state, indicate rest recordable time; during record, indicate recorded time. Indicate storage card has been inserted, Indicate the SD available has write-protect. Fill light Indicate the fill light is on. Digital zoom 10 Pause Indicate the current digital zoom multiple Indicate pressing the up key to pause or continue recording. Indicate the current metering mode ƹ Menu Settings 11 Press the menu key to open the video main menu, press the up/down key to choose the desired menu, press the right key or the OK key to enter the submenu. In the submenu, press the menu key or the left key to back to the main menu; press the up/down key to choose, and press the OK key. After backing to the main menu, you can press the menu key to exit. In menu selection, the chosen menu will have a blue background. In record menu, you can have the following options: Main Menu Submenu Movie Size 640×480 320×240 Frame Rate Metering High 30 frames/s Low 15 frames/s Center Focus on the central area during light detection. Multi Focus on multiple points during light detection Spot Focus on only one point during light detection Auto Daylight White Balance Description High resolution Low resolution Cloudy Fluorescent Tungsten Auto white balance, applicable for many cases. Applicable for the environment with sunshine Applicable for the cloudy environment. Applicable for the environment with fluorescent lamp Applicable for the environment with fluorescent environment lamp. Set Up Menu Whether in record mode or capture mode or playback mode, press the menu to open the desired menu, then press the T key or W key to enter the set up main menu; press the up/down key to choose the desired menu, press the right key or the OK key to submenu, in which, press the menu key or the left key to back to the main menu, press the up/down key to choose the desired item and press the OK key to confirm. After backing to the main menu, press the menu key to exit. In menu selection, the chosen menu will have a blue background. Main Menu Submenu Description Sounds Open or close the shutter sound during capture. Shutter 12 Auto Review Power Frequency Power Save Date & Time Start-up Three options for choice Beep Volume Set as ON/OFF Choose the volume for key tone Off 1s 3s Auto off 1s review after capture 3s review after capture 50Hz Set as 50Hz frequency 60Hz Set as 60Hz frequency 1min 3min 5min Set auto power-off after 1 minute. Set auto power-off after 3 minute. Set auto power-off after 5 minute. Set date/time and date format. English Language Set menu language as English Set menu language as simplified Chinese Set menu language as traditional Chinese S. Chinese T. Chinese TV Out NTSC PAL Set as NTSC TV system Set as PAL TV system Connected and set as removable disk mode Connected and set as PC camera mode MSDC USB PCCAM Start-up Image Off System My Image Format Yes/No Close power-on image Use system power-on image Use custom power-on image Format storage card Reset All Yes/No Restore factory settings In the sound submenu, press the up/down key to choose the desired option and press the T key or W key to switch to the desired option. When setting date/time, press the T key or the W key to switch the set options, press the up/down key to adjust it. Press the OK key to confirm, press the menu key to cancel the settings and back to the main menu. When using custom power-on menu, in the playback mode, choose the desired photo and set it as power-on menu; otherwise, “My Image” menu will be in grey and cannot be used. 13 Capture Mode After power-on, enter the capture Mode. Move the macro switch to Normal ( ) or Macro ( ) to choose the desired focus. Press the shutter key to start taking photos. Press the T key or W key to have digital zoom. Press the up key to switch to Self Timer ˄ ˅or Continuous˄ ˅. Continuous: You can press the shutter key to take 3 photos. Self timer: Press the shutter key to have countdown and take the first photo after 2s or 10s. Use LED fill light: Press the up key to open or close LED fill light. (In playback mode, the fill light cannot be used.) In idle mode, press the OK key to switch among the three screen display modes: Turn off Screen, Turn off Icons and Normally Display. ────────────────────────────────────────────────── Note: Always hold the camera firmly, or place it on tripod etc in order obtain clear photos. Press the shutter key to take photos, and then the Busy lamp will be on. In such case, do not move the camera; instead, after the Busy lamp is off, move the camera in order to prevent unclear photos. ────────────────────────────────────────────────── ƹ Screen display information in capture mode Icon Icon name Battery Description Indicate the current battery state. When it is in read, it indicates the battery is used up and the camera will power off 14 automatically. Capture Mode White balance Metering Indicate the current metering mode Exposure compensation Indicate exposure compensation value Resolution Indicate the current photo’s resolution Photo quality Number left Card Indicate the current photo’s quality Indicate how many photos you can still take. indicates storage card has been inserted, indicates the SD available has write-protect 10 Fill light Indicate the fill light is on. 11 Self-timer countdown Indicate self timer countdown 12 Digital zoom Indicate multiple Indicate in capture mode at present Indicate the current white balance setting. the current digital zoom ƹ Menu Settings Press the menu key to open the video main menu, press the up/down key to choose the desired menu, press the right key or the OK key to enter the submenu, in which you can press the left key to back to the main menu, press the up/down key to choose the desired option, press the OK key to confirm. After backing to the main menu, press the menu key to exit. In menu selection, the chosen menu will have a blue background. We can have the following menu options in capture mode: Main Menu Resolution Submenu 2048×1536 1600×1200 1280×1024 640×480 Description 3m pixels 2m pixels 1.3m pixels 0.3m pixels 15 Excellent photo quality Fine photo quality Normal photo quality Focus on the central area during light Center detection. Focus on multiple points during light Metering Multi detection Focus on only one point during light Spot detection Auto white balance, applicable for Auto many cases. Applicable for the environment with Daylight sunshine Applicable for the cloudy White Balance Cloudy environment. Applicable for the environment with Fluorescent fluorescent lamp Applicable for the environment with Tungsten fluorescent environment lamp. Use the T key and W key to adjust Exposure exposure compensation Off Use single mode Self-timer 2S Use 2s self timer mode Driver Mode Self-timer 10S Use 10s self timer mode Burst Use continuous mode Normal Normal photo effect B&W Black-white photo effect Sepia Classical photo effect Effect Negative Negative photo effect Red Red photo effect Green Green photo effect Blue Blue photo effect Note: When entering the exposure submenu to adjust exposure compensation, press the T key and the W key to adjust exposure compensation value, then the brightness of the screen will change accordingly. After the setting is over, press the OK key to confirm and back to the main menu; press the menu key to cancel settings. Quality Super Fine Fine Normal Set Up Menu 16 The same as the record mode. Playback Mode You can enter the playback mode with the mode key. In the playback mode, press the up key to choose files forward or the down key to choose files backward. When the desired video is chosen, press the OK key to start playing, then the right corner of the screen will display play counter. During play, you can press the up key to pause, press it again to continue, press the OK key to stop. After desired photo is chosen, press the T key to zoom in the photo, press the OK key to lock the enlarged photo, then press the up/down/T/W key to move the photo. To exit from the zoom-in lock mode, press the OK key. ƹ In the playback mode, you will have the following screen display options. Icon Icon name Description indicates the current file is File type photoˈ 17 indicates the current file is video. File Indicate protection Playback mode File no. Move hint protected. Indicate playback mode is chosen at present Indicate the location of the current file and total of files (with timer displayed during video play) Indicate the photo is zoomed in and locked and can be moved. Zoom-in the current multiple Indicate the current zoom-in multiple Key hint Indicate key operation file is photo ƹMenu Settings Press the menu key to open the video main menu, press the up/down key to choose the desired menu, press the OK key to enter the submenu, in which you can press the left key to back to the main menu, press the up/down key to choose the desired option, press the OK key to confirm. After backing to the main menu, press the menu key to exit. In menu selection, the selected menu will have a blue background. In capture mode, you will have the following options: Main Menu Lock Delete Submenu Description Lock/Unlock One Lock/Unlock the current file Lock All Unlock All Lock all files Unlock all files One Delete the current file All Delete all files Start Start slide show Slide show Interval Set slide show interval (1-10s) Effect Repeat B&W Set as circular play or not Set photo as black and white effect 18 Sepia Negative Red Green Blue Set photo as classical effect Set photo as negative effect Set photo as red effect Set photo as green effect Set photo as blue effect Press the OK key once to rotate photo by 90 degrees Save the rotated photo. Back to the main menu Rotate Rotate Voice Memo Start-up Image Save Back Add Delete Add voice memo for photos. Delete the voice memo in photos Confirm the current photo as start-up image Cancel Yes No Note: 1. After effect or the rotated photo is saved, you will have a new photo. 2. At most, you can add 30s voice memo. To add voice memo, you can press the shutter key to stop. In the playback mode, the photo added with voice memo will have an icon of . Press the OK key to start playing the voice memo; during playing, press the Up key to pause or press the OK key to stop. ▲Add voice memo ▲Photo after memo added ▲Play voice memo Set Up Menu The same as the record mode. Connect PC to Download Photos/Videos After connecting the camera to PC and entering the Mass Storage mode, in “My Computer” window, you will see one new removable disc. The photos or videos taken are stored under the directory “DCIM\100JLCAM” in the removable disc. 19 You can enter this directory and copy the desired file onto your PC HD. ────────────────────────────────────────────────── Note: During file downloading, do not disconnect USB; in USB connection, do not plug or pull the memory card in order to prevent data loss. ────────────────────────────────────────────────── Use PC Camera Function Before using PC Camera, make sure that the camera driver has been installed on PC. After the driver is installed, add one " SPCA1528 PC Driver” menu into the “Start→Programs” menu, then there will be one shortcut icon. After the camera is connected with PC and enters PC camera mode, click this icon (as indicated in the following figure) to open AMCAP window, in which, the video corresponding to the lens will be displayed. If AMCAP software is not used, the PC Camera function can be used for network video transmission. 20 Make sure the Option has selected Preview option. Install Driver and Software The attached CD contains camera driver and the software PhotoImpression and VideoImpression free of charge (used to process photos and videos respectively). Installation Interface Insert the attached CD into the CD-ROM, then the system will automatically run the software installer in the CD and the screen will have the installation direction window as follows. 21 (It may take several minutes to run the program, depending on PC performance. If there is no installation direction window occurring, please run “Windows Explorer” and run the “SoftwareInstaller.exe” under the CD-ROM.) Install driver In the software direction installation window, click the “Install Driver” button, and complete the installation step by step. The driver is installed. Please restart the computer. Install Software Attached free of charge In the install direction window, click “Install PhotoImpression” button and “Install VideoImpression” button to accomplish the installation according to the screen hint. Install PhotoImpression: 22 Install VideoImpression: After the software is installed, before the first use, please restart the computer. For the instructions for PhotoImpression and VideoImpression, please refer to the Help menu. 23 Specifications Image sensor 1.3m pixels Main functions Record, capture, playback, removable disc, PC camera. Lens F2.8 f=6.0mm Focus 140cm~infinite (normal) 15cm~25cm (macro) Digital zoom Shutter LCD screen 4× Electronic 1.5” TFT LCD Photo resolution 2048×1536;1600×1200;1280×1024; 640×480 Video resolution VGA 640×480, QVGA 320×240, 30/15 frames/s White balance Auto/manual: Daylight, cloudy, fluorescent and tungsten Exposure Auto/manual compensation (-2.0EV̚+2.0EV, 0.3EV step) Self timer 2s or 10s Video AVI Photo JPEG File format Storage media SD/MMC card USB port Mini USB2.0 interface Power supply 3 x AAA alkali battery. 24 Troubleshooting Low battery, please replace it. Unable to start up after battery is installed. Unable to take photos and record videos when the shutter key is pressed. Unclear photos Dark photos videos or The battery is not removed of the package. The battery is installed inversely. Please check if the battery is installed correctly. No memory card is inserted. Please insert a proper card for capture or record. The SD card has write-protect. Please take it out and push this protection switch to the non-protection position. Wrong focus. Please move the macro switch to choose a proper focus again. The hands are shaking during capture. Please hold the camera firmly or use other fixing objects such as tripod etc to stabilize the camera and try not to shake the camera. Insufficient rays in the environment. Please take photos or videos in the place with sufficient rays or use lamp to intensify brightness. Low battery. Please replace it. Automatic power-off Unable to delete the file in the camera. To save power, if the camera has no operation for more than 1min (3min or 5min, depending on setting), it will power off automatically. The SD card has write-protect. Please take it out and push this protection switch to the non-protection position. 25 26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Keywords : Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2009:08:13 11:34:26+08:00 Modify Date : 2009:08:13 11:34:26+08:00 Metadata Date : 2009:08:13 11:34:19+08:00 Creator Tool : PScript5.dll Version 5.2.2 Document ID : uuid:38AE512FBA87DE119B67D4C76BBD1938 Instance ID : uuid:f425e801-ea9e-4d71-ac33-b23aaa4029a8 Derived From Document Name : 0e37fbb7-84cf-11de-0000-217e3a03e468 Derived From Document ID : 0e37fbb7-84cf-11de-0000-217e3a03e468 Format : application/postscript Title : manual Creator : LLin Description : Page Count : 26 Subject : Author : LLinEXIF Metadata provided by EXIF.tools