SIGFOX SENSIT3 Sigfox demonstrator User Manual Sensit Legal Notice

SIGFOX SA Sigfox demonstrator Sensit Legal Notice

Contents

sensit-legal-notice

Legal notice CONTENT OF THE PACKAGE Your Sens’it package contains: 1 Sens’it 3 1 magnet 1 Micro-USB cable 1 Velcro strap 1 user manual 1 legal noticeSAFETY INSTRUCTIONS Before any use please read the Sens’it manual carefully and keep it for any later reference. Defects caused by unauthorized modifications, improper use, negligence, exposure to inclement weather conditions, accident, or any use of this product that is not in accordance with the provided instructions will result in the exclusion of the warranty and of the manufacturer’s liability. Do not use the Sens’it with any part or component that is not coming from Sigfox or the Sens’it package. Place the Sens’it in a cool and dry area. For the withstood temperature and humidity range, see the technical specifications. Do not leave any electronic equipment on top of the Sens’it. Do not submerge the Sens’it in liquids. Do not place the Sens’it magnet close to electronic devices such as PCs, hard drives, batteries, etc. Doing so could damage them, or delete the information they contain. Do not use the Sens’it while it is charging.
WARNING STATEMENT United States This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipmentNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a special installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Do not throw away Sens’it in the normal household trash; it must be disposed properly in the same way as other electronic equipment following official procedures.FCC: 2ACK7SENSIT3Europe CanadaThis device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Radiofrequency radiation exposure Information: This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. ICIC: 12204A-SENSIT3 Australia Singapore JapanThis device is granted pursuant to the Japanese Radio Law (電波法). This device should not be modified (otherwise the granted designation number will become invalid)
Technical Specifications Designed in FranceAssembled in ChinaModel 3.1 3.2 3.3 3.4Radio CharacteristicsTX Center Frequency(MHz)868.13 902.2 923.2 920.8RX Center Frequency (MHz)869.525 905.2 922.2 922.3TX Power (dBm ERP)14 22 10 22Power Supply CharacteristicsBattery type LiPo, 250 mAh, 3.7 VWARNING: the battery cannot be changedRecharge Micro-USB, 5 VEnvironmental CharacteristicsOperatingtemperature (°C)-10 °C to 50 °CChargingtemperature (°C)0 °C to 40 °CRelativehumidity (%)30% to 90%Mechanical CharacteristicsDimensions (W x H x D)52 mm x 82 mm x 15 mmWeight 50 gProtection IP54CertificationsCountry approval Europe USA Japan SingaporeAustralia

Navigation menu