SIIG USBCE071001 Wireless Audio Link User Manual USBCE071001UserMan

SIIG Inc Wireless Audio Link USBCE071001UserMan

users manual

WIRELESS AUDIO LINK INSTALLATION GUIDE The Wireless Audio Link is Hi-Tech products which playsmusic from any FM equipped stereo source. Wirelesslytransmits the audio using FM frequencies.Features and BenefitsModulation : FMChannel : 5 ChannelsFrequency : 88.1Mhz ~~88.9MhzDistance : 10 MetersSupplied voltage : 5VSupplied current : 22mAPower requirement : USB Bus power or External PowerWeight : 10.8gSize : L 6 cm * W 1.8 cm * H 1.4 cmApplication for : PC , Laptop, Hi-Fi stereo, TV and MP3……Package Contents available : 1. PC or Laptop : Audio Cable 2. Hi-Fi Stereo, TV : AC/DC adapter 3. MP3 : Car power adapter Installation for PC :1. Adjust the frequency accord to the Control Data indicated of 5frequency. Turn on the selection switches for selecte the usingfrequency.2. Connect this unit to a USB of PC for power, make sure the USBport actually has power. Insert one end of the audio cable intothe unit. Only one end fits this jack, and insert the other end ofthe audio cable to your audio soure’s output jack. Now the LED
will blinking, it is mean the function is working.3. Adjust the frequency on your FM equipped audio device to matchthe Wireless Audio Link. You should hear music from PC ( like CD,Game). Turn on the volume if necessary.Installation for Car audio, received from MP31. Adjust the frequency accord to the Control Data indicated of 5frequency. Turn on the selection switches for selecte the usingfrequency.2. Insert one end of the audio cable into the car power, connect thisunit to a USB port of car power cable, insert the end of audiocable to the unit and the other end to audio input of MP3, now theLED will blinking, it is mean the function is working.3. Adjust the same frequency to FM for car audio and this unit,you should hear music of MP3 from your car audio.Installation for Hi-Fi and TV1. Adjust the frequency accord to the Control Data indicated of 5frequency. Turn on the selection switches for selecte the usingfrequency.2. Connect the USB end of adapter to the unit, insert the other endfor power. Insert the the audio cable to the unit and the otherend to the Hi-Fi audio source’s output jack. Now the LED willblinking, it is mean the function is working.4. Adjust the same frequency for Hi-Fi and Audio Link, you shouldhear music from Hi-Fi ( like CD, VCD, DVD,MD, MP3). Turn onthe volume if necessary.If they have problem that unable to transmite, please check thefollowing points:1. Is the USB port connecting correct ?2. Are the same frequency of receiver and transmitter?3. There are audio output from your audio device?
4. Whether your audio have adjucted to FM Channel?5. Are there same 5 frequency as Control Date indication?6. Is the receiving range too long?7. Are there too much obstruction within the receiving range?Frequency Selections:D0(pin15) D1(pin16) D2(pin17) D3(pin18) FrequencyOFF ON OFF OFF 88.1MHZON ON OFF OFF 88.3MHZOFF OFF ON OFF 88.5MHZON OFF ON OFF 88.7MHZOFF ON ON OFF 88.9MHZMODEL: WS-WAL1FCC ID: FK3USBCE071001This device complies with part 15 of the FCCRules.Operation is subject to the following twoconditions:(1) this device may not cause harmfulinterference,and (2) this device must accept anyinterference received,including interference that maycause undesired operation.
FCC INFORMATIONThe Federal Communication Commission Radio Frequency Interference Statementincludes the following paragraph:The equipment has been tested and found to comply with the limits for Class BDigital Device, pursuant to part 15 of the FCC rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with instruction, may cause harmful interference toradio communication. However, there is no grantee that interference will not occur ina particular installation. If this equipment dose cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of thefollowing measures:nReorient or relocate the receiving antenna.nIncrease the separation between the equipment and receiver.nConnect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.nConsult the dealer or an experienced radio /TV technician for help.The user should not modify or change this equipment without written approval fromSIIG Inc.. Modification could void authority to use this equipment.

Navigation menu