SIRIUS Sxvct1 Installation Wcrop Commander Guide One Sheet User Manual

Sxvct1 Installation Wcrop SXVCT1_installation___WCrop

2016-03-11

User Manual: SIRIUS Sxvct1 Installation Wcrop

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadSIRIUS Sxvct1 Installation Wcrop Commander Guide One Sheet User Manual
Open PDF In BrowserView PDF
FOR INSTALLATION PURPOSES ONLY

Commander Touch Installation Templates

Model #: SXVCT1

Below are two templates provided for installing the Commander Touch Display Controller.
1.

Flush Mount Template - Use when installing the Display Controller when utilizing the 			
included Flush Mount. Review the additional instructions on the next page for installing			
the Flush Mount before cutting the opening.

2.

Surface Mount Template - Use when Surface Mounting the Display Controller.

CAUTION: When printing these templates, be sure the print settings are set to print “actual size” and not “fit
to page”. Avoid reducing or enlarging the print size. Before cutting any openings, confirm that the templates
are printed the exact size by measuring one of the lengths below with a ruler.

1. Flush Mount Template (See installation instructions on the next page)
R7.5 mm

1mm

55mm

cut and remove

14mm

48mm

110mm

R2.8 mm

135mm

2. Surface Mount Template
4mm
5/32”

TOP - FRONT

43mm
105mm

Cable
Area

one inch
© 2015 Sirius XM Radio Inc. Commander Touch Template 151022

10 mm

FOR INSTALLATION PURPOSES ONLY

Commander Touch Installation Templates

Model #: SXVCT1

Installing the Commander Touch Display Controller Using the Flush Mount
A. Locate a suitable place in your dash or center console for installing the
Flush Mount. The Flush Mount requires an opening of 48 mm high x 110
mm wide, and an approximate clearance behind the dashboard or console
of 25 mm depth to accommodate the Mounting Brackets. Avoid any
location which will block or interfere with an airbag, or a location which
interferes with the safe operation of the vehicle.

A. - B.

B. Place the template on the area selected and carefully cut the opening,
following the outline on the template.
C. Once the opening has been cut, remove the template and place the
Flush Mount in the opening. The Flush Mount is asymmetrical so the
top/bottom orientation is not important.

C.

D. Bend each of the two Mounting Brackets into a U shape.
E. Attach the Mounting Brackets to the rear of the Flush Mount, using the
provided 4 screws. Position the legs of the Mounting Brackets against the
inside of the dash or console surface and tighten the screws. Note that you
may need to bend or cut the ends of the mounting brackets depending on
the specific application.
F. Once the Flush Mount is secured in place, insert the Commander Touch 		
Display Controller into the Flush Mount. First, route the cable from the left 		
side of the Display Controller into the opening at the bottom left of the Flush
Mount, and then gently press the Display Controller into the Flush Mount, left
side first and then the right side. It will snap into place.
G. Route the cable from the Display Controller to the place behind the dash or 		
center console where you plan to install the Tuner Module.

E.
F.

© 2015 Sirius XM Radio Inc. Commander Touch Template 151022

D.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42
Create Date                     : 2015:10:22 14:20:35-04:00
Metadata Date                   : 2015:10:22 14:20:36-04:00
Modify Date                     : 2015:10:22 14:20:36-04:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:f9ff970c-db67-c049-9151-3e649ba531c9
Original Document ID            : xmp.did:8C7F20B923206811822AD8D824A5FC38
Document ID                     : xmp.id:26c69e2e-5991-47cb-bfe9-7e35c29f6fc9
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:40bc890e-a670-4aae-b90c-2f5ae3cb8d3f
Derived From Document ID        : xmp.did:56d570cf-a96a-486e-8505-1cc6d91befc2
Derived From Original Document ID: xmp.did:8C7F20B923206811822AD8D824A5FC38
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2015:10:22 14:20:35-04:00
Format                          : application/pdf
Title                           : Commander Installation guide one sheet.indd
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Page Count                      : 2
Creator                         : Adobe InDesign CC 2015 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu