SK Telecom ALBERT-BT BT Device User Manual part 1

Download:
Mirror Download [FCC.gov]
Document ID	2517107
Application ID	Z+oynuMR86rgs8B3VWBDkQ==
Document Description	User Manual part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	309.28kB (3866004 bits)
Date Submitted	2015-01-28 00:00:00
Date Available	2015-07-27 00:00:00
Creation Date	2015-01-27 10:30:26
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2015-01-27 10:30:26
Document Title	User Manual part 1
Document Creator	Adobe InDesign CS5.5 (7.5)

Smart Robot albert
Guide Book
Smart Robot albert
Guide Book
Install the Smart Robot Launcher
Register the Robot and Peripheral Devices
Get Ready to Play with albert
Contents
Play with albert
Service
albert's Remote Control
albert's Story
Glutton Alien
Hurly-Burly Kids market
Application Overview
albert Doesn't Like This
Service
Specification
Warranty Card
Precautions
Get to Know
Get Ready to Play
Get Ready to Play with albert
Play with Albert
albert's Configuration
Name and Function of Each Components
albert's Hardware
Name and Function of Each Component in Peripheral Devices
Service
Get to Know albert
04
Get to Know albert!
Get to know my robot friend, albert.
05
albert’s Configuration
06
Smart pen & Stand
albert's Main Body
Smartphone Stand
(Big, medium, small)
Geniekids Touch Book 1 ~ 5
Word List 1
Alien Mukkaebi Card
(56 pcs)
* Charging cable is not included. Please use Micro 5-Pin charger.
Smart Dice
Hurly-Burly Kids market
Name and Function of Each Components
Size (W x L x H): 11.5 cm x 11.6 cm x 12.8 cm / Weight: 250 g
Eye LED
Mobile phone stand (top)
Proximity sensor receiver
Accessory fixation
Charging
/Bluetooth indicator lamp
Mobile phone stand
(bottom)
Side LED
Battery checkrer
Power wheel
Front OID sensor
Power switch
USB charging slot
Speaker
Caster
Rear OID sensor
Left distant sensor
Card reading sensor
Right distant sensor
07
Autonomic Mode
Smart Installation
Lift and fix
Turn on
the power switch
ON
Mount stand on albert's front side depending
on your smart phone size.
Charge slot
Cha
rgin
with a click Push
and fix
The autonomic mode will begin six
seconds after turning on a power
switch of Albert. Control Albert by
blocking the left and right proximity
sensor with your hand.
How to charge robot
Power goes on when power button
is moved to the right. Power goes
off when power button is moved to
the left.
Connect your smart phone charger (Micro 5pin charger) to
the charging terminal in the rear of robot main body and
charge.
Separate charger when red charging light in the front of robot
main body goes off.
albert’s Hardware
08
Internal Sensor
Proximity Sensor x 2,
OID Sensor x 2,
Acceleration Sensor
Light Sensor, Temperature Sensor,
Battery Level Sensor
Wireless Auto Connection
Bluetooth
Driving Part
2 Wheels, Speaker, Buzzer,
Full-Color LED for Eye x 2,
Card reading sensor
Side LED x 2
Display Part
Battery Indicator (Red)
Bluetooth Indicator (Blue)
Battery Lasting Time
Battery Lasting Time,
5 hours for Continuous Operation,
7 days for Standby
(Lithium-Polymer Battery)
Cradle Function
Smart Phone Holding
Name and Function
of Each Component in Peripheral Devices
Smart Pen
Smart Dice
Smart Pen is one of the peripheral devices of Smart Robot that
reads 65,535 invisible codes printed in books or cards by using
optical ID sensor. Smart Pen and Smart Robot are connected
through Bluetooth communication. Smart Robot sends data of
Smart Pen to the launcher and application.
Smart Dice is one of the peripheral devices of Smart Robot that
recognizes the spots on the dice. Smart Dice and Smart Robot are
connected through Bluetooth communication. Smart Robot sends
data of Smart Dice to the launcher and application.
Recharging Terminal
Recharging Indicator
Botton
Bluetooth Indicator
Recharging Terminal
Bluetooth Indicator
Recharging Indicator
OID Sensor
09
10
Get Ready to Play with albert!
Get ready to make albert move!
11
Install the Smart Robot Launcher.
Smart Robot Launcher
Touch Google Play Store .
Smart Robot Launcher
Search
Search and touch Smart Robot
Launcher.
Smart Robot Launcher
Download
Touch Installation and download Launcher, and app will be
installed on screen.
Smart Robot Launcher
Start
Start Smart Robot Launcher and
turn power on, and Robot will
be recognized automatically.
12
TIP
Do not skip ‘Search Robot that will be
registered ‘ page.
End Launcher and Robot and make reconnection. Check if smart phone Bluetooth is
turned on.
Register the Robot and Peripheral Devices.
Robot Connection
Touch End after inputting the
name, and screen will be moved
to the wallpaper.
Peripheral Device
Registration
Touch Robots tab on bottom
of screen and register Smart
Dice or Smart Pen in Peripheral Device menu.
Smart Pen Registration
Smart Dice Registration
Touch Registration button on
bottom of screen and push
Smart Pen button.
Touch Registration button on bottom
of screen. It will be automatically
registered when Smart Dice is thrown
10 cm or higher in the air.
13
TIP
Robot makes no sound or Robot makes no
or slow movement after connection.
Disconnect Robot, turn off both Smart Phone
and Robot, and then make reconnection.
TIP
If red light shows up when pushing Smart
Pen button, it means that battery level is low.
Therefore, charge it before use.
Get Ready to Play with albert
App Download
Contents Use
Adobe AIR Installation
Touch ‘Smart Robot Market’ on
the wallpaper, and download and
install the app in the market.
Touch the app in the folder
created on the wallpaper, and
use contents.
Search and install “Adobe AIR”
in Google Play Store.
Robot Deletion &
Reconnection
Touch Robot tab on bottom and
touch Recycle Bin, and Robot will
be deleted.
14
1. Start albert app.
2. Installation page shows up automatically.
3. Start installation, and screen will move to
Google Play Store.
4. Install Adobe AIR
5. Push Back button on smart phone and return
to Smart Robot Launcher.
6. Now use the app.
TIP
If Robot does not work normally,
check the battery or delete Robot
and reconnect it.
Get Ready to Play with albert
Recharging
Peripherals Deletion
& Reconnection
Touch Robots tab on bottom and go
to the Peripheral device registration
menu. Touch the Recycle Bin button on the top. This will delete the
peripheral device.
1. Connect smart phone charger with albert or peripheral device.
2. When charging the battery of albert or peripheral device, battery lamp is turned red, and
When charging is completed, the light is turned off.
albert Recharging Time
2.5 hours(for full charge)
Battery lasts 5 hours for continuous operation /
* Recharging time may differ according to operation time.
Smart Pen Recharging Time
1 hour for full charge
Battery lasts 5 hours for continuous operation / 2 months for
standby
Smart Dice Recharging Time
Problem Solution Tip!
30 minutes for full charge
2 weeks for standby / 1000-times dice throw after full charge
1. Robot makes no or slow movement.
2. Robot make no or slow recognition of Smart Dice.
3. Smart Pen makes no recognition of books.
Check the battery of Robot or peripheral device and recharge it or make reconnection.
4. What if having a phone call when using Robot?
Set ‘Do Not Call’ in Setting menu in Launcher.
5. When Robot is connected normally, it moves with sound of
‘Hello! My name is albert of SK Telecom. I’m happy to meet you, master.’
If Robot does not make this sound, refer ‘Robot Deletion & Reconnection’ in User Manual.
15
16
Play with albert!
You’re now ready to play with albert! Have fun
with albert, and get to know more about him.
17
albert’s Remote Control!
Use your smartphone
to make albert move, sing, and talk!
18
Start albert Remote Controller in
the launcher.
Select Game Method on the main
screen and check various functions
of albert Remote Controller.
Take off your smart phone from albert.
Check various functions of albert
Remote Controller such as control,
emotion, eye, color, music and microphone.
Select Start in the menu and start
albert Remote Controller~
albert’s Remote Control!
Use your smartphone
to make albert move, sing, and talk!
19
Move albert forward.
Move albert backward.
Move albert left.
Move albert right.
albert’s Story
Do you want to know why my friend albert came to Earth?
Enjoy various events and listen to albert’s story.
20
albert Story is composed of 5 stories of My Friend Robot albert. You can install your smart
phone on albert and check various events.
My Friend Robot albert 1 shows the reason and the background of albert’s arrival at Earth.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2015:01:27 10:30:26+09:00
Create Date                     : 2015:01:27 10:30:26+09:00
Metadata Date                   : 2015:01:27 10:30:26+09:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5)
Format                          : application/pdf
Document ID                     : uuid:40fac63a-3bc0-4e20-a3d0-55e026562980
Instance ID                     : uuid:93345b22-2830-4ec1-93b6-09390919ffa1
Producer                        : Adobe PDF Library 9.9
Page Count                      : 20
Creator                         : Adobe InDesign CS5.5 (7.5)

EXIF Metadata provided by EXIF.tools