SKSpruce Technologies SAC700E Intelligent Multi-Service Controller User Manual
SKSpruce Technologies Co., Ltd. Intelligent Multi-Service Controller
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3959334 |
| Application ID | /sv6O5dkpIv0uATtAD+Kmg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 101.67kB (1270824 bits) |
| Date Submitted | 2018-08-10 00:00:00 |
| Date Available | 2018-08-10 00:00:00 |
| Creation Date | 2018-07-23 16:52:23 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-07-23 16:52:33 |
| Document Title | User manual |
| Document Creator | Acrobat PDFMaker 18 Word 版 |
| Document Author: | sk-wishzou |
http://www.skspruce.com/ San Jose 1885 Lundy Ave., Suite 270, San Jose, CA 95131, USA Tel: +1 (408) 449-5604 SAC700E INTELLIGENT MULTI-SERVICE CONTROLLER INSTALLATION MANUAL Hong Kong 15K International Industrial Centre, 2-8 Kwei Tei Street, Shatin, Hong Kong Tel: +852 26983874 Revision: 1 Issued on 2016-12-15 Chengdu A1, Tianfu Software Park, 1129 Century City Road, High-tech Zone, Chengdu, Sichuan, P.R. China Tel: +86 28 85231119 SKSpruce Technologies No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without prior, express and written permission from our company, Inc. Our company reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of our company to provide notification of such revision or changes. Our company provides this documentation without warranty of any kind, implied or expressed, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Our company may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. UNITED STATES GOVERNMENT LEGENDS: If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the following: United States Government Legend: All technical data and computer software is commercial in nature and developed solely at private expense. Software is delivered as Commercial Computer Software as defined in DFARS 252.227-7014 (June 1995) or as a commercial item as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in our company’s standard commercial license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide. Contents Contents 1 Installation Environments ........................................................................................................................ 3 1.1 Security Precautions ........................................................................................................................ 3 1.1.1 Security Advisories .................................................................................................................. 3 1.1.2 ESD Protection ........................................................................................................................ 3 1.1.3 Security Consideration for the Use of Laser............................................................................ 4 1.2 Tool List ............................................................................................................................................ 4 1.3 Environment Requirements .............................................................................................................. 4 1.4 Operator Requirements .................................................................................................................... 5 2 Unpacking and Inspections ..................................................................................................................... 6 2.1 Product Introductions ....................................................................................................................... 6 2.2 Unpacking Inspections and Assembly ............................................................................................. 7 3 Frame Installations .................................................................................................................................. 8 3.1 Frame Dimensions ........................................................................................................................... 8 3.2 Frame Installations ........................................................................................................................... 8 3.3 Frame Ground Connections ............................................................................................................ 11 4 Installing and Removing Components .................................................................................................. 12 4.1 Installing CM-2XGEF/CM-4GEF Extended Module (optional) ....................................................... 12 4.2 Installing/Removing SFP Module ................................................................................................... 13 5 Cable Connection .................................................................................................................................. 15 5.1 Cable Type ..................................................................................................................................... 15 6 Power On/Off ......................................................................................................................................... 17 6.1 AC Power On/Off ............................................................................................................................ 17 6.2 DC Power Switch ........................................................................................................................... 17 7 Specifications ........................................................................................................................................ 18 7.1 Chasis Specifications ..................................................................................................................... 18 SAC700E Wireless Access Controller Installation Manual Installation Environments Preface Audience This publication is for experienced network managers to configure and manage the AP under local forwarding or centrol forwarding mode. Symbol Symbol Descriptions Bold The CLI command is Bold. Italic The secondary title is in Italic. Courier New Courier New. Example: # ping -t 10.10.10.1 Change Records Version Issue Date Remarks 01 2015.04.24 Version 01 02 2016.02.18 Version 02 SAC700E Wireless Access Controller Installation Manual Installation Environments Installation Environments 1.1 Security Precautions To avoid personal injury and equipment damage, please carefully read the following safety precautions before installations. 1.1.1 Security Advisories Make sure the ground dry and smooth. Keep the chassis clean and dust-free. Keep the chassis away from radiator and heat source. Keep the chassis and installation tools not in walking areas. Before moving the chassis, remove the internal lines such as the power line. To prevent any surface damage, please avoid friction between equipment. Use only local and national electrical codes to upgrade the equipment. 1.1.2 ESD Protection The equipment contains ESD sensitive devices and ESD can cause equipment and its parts seriously damaged. Please avoid electrostatic discharge damage according to the following precautions: When unpacking, please remove the anti-static packing material components after the installation devices are ready. Before removing the anti-static packing, please make sure to use earth tape to discharge the static electricity of the body. Before moving a sensitive device, please place it into the antistatic container or using anti-static packing. If possible, even in the absence of electrostatic environment, please always use antistatic mat and work mat to handle any sensitive devices. Please follow the steps below when putting on anti-static bracelet: Wear the anti-static bracelet. Fasten the anti-static bracelet, and ensure the antistatic bracelet keeping good contact with the skin. Ensure the anti-static bracelet grounding end inserting into the ground, and good contact between the antistatic bracelet and the ground. SAC700E Wireless Access Controller Installation Manual Installation Environments 1.1.3 Security Consideration for the Use of Laser The equipment supports optical interface. When using the optical fiber in upgrade operation, pay attention not to look directly into the optical interface. Caution: Optical fiber laser hurts eyes. 1.2 Tool List Table 1-1 Tool list Tool Usage Cross Screwdriver Cross Screw Drive Straight Screwdriver Straight Screw Drive Anti-Static Bracelet Anti-Static Electricity Optical Fiber Cleaning Kit Optical Fiber Cleaning Caution: The tools mentioned above are not delivered with the equipment. 1.3 Environment Requirements To ensure the normal operation and prolong its service life, please ensure meet the following installation environment requirements. Table 1-2 Environment requirements Item Unit Range Temperature 0 to 40 Relative Humidity ℃ 5 to 85 (Non-condensing) Air Pressure kPa 70 to 105 (Air pressure of 70 kPa is equivalent to 3000 m above sea level.) Place the board in a clean and ventilated environment. The installation site should be far away from radiators and heat sources and without conductive dust, corrosive gas and explosives. Please do not place the equipment in dusty environment, or may clog the filter, and reduce the cooling efficiency. SAC700E Wireless Access Controller Installation Manual Installation Environments 1.4 Operator Requirements Operators need to meet the following requirements: Basic knowledge of equipment test and operation. Basic knowledge of laser operation, ESD and electronic appliances. Basic knowledge of using installation tools. Experienced service engineers in communication technology or other relative fields. Fully understand and seriously take security standards. SAC700E Wireless Access Controller Installation Manual Unpacking and Inspections Unpacking and Inspections 2.1 Product Introductions Figure 2-1 Product figure The appearance of the product is as the above figure. Table 2-1 The front panel Name No. Description USB Managing CPU Serial port Adjusting CPU Network port Data transmission. Optical port Data transmission. Table 2-2 Indicators Name Status Description Power Steady Green The chassis and board are both in normal power supply DM Yellow Self-checking indicator Status Yellow System status indicator HA Yellow Master-backup indicator SAC700E Wireless Access Controller Installation Manual Unpacking and Inspections 2.2 Unpacking Inspections and Assembly Follow these steps to unpack each container for delivery: Before unpacking and sign for delivery, check damage of each container in transport. Any damage claim should be in accordance with the procedure that the carrier releases. According to the packing list, check each package and its components, verify all the items, and make sure all the items are in good condition. The equipment packaging item list is as following: 1U Equipment Assembly parts (hangers and screws) AC Power Line SFP module (optional) Debugging Cable A set of documents Warnings: This equipment contains sensitive devices. To prevent electrostatic damage, please wear anti-static bracelet. SAC700E Wireless Access Controller Installation Manual Frame Installations Frame Installations 3.1 Frame Dimensions The equipment can be installed in a standard 19-inch (48.26 cm) frame. The 19-inch frame, released on August 24th, 1992, must accord with the standard of EIA - 310 D. Each case is 22.50 inches tall (57.16 cm). This is equivalent to about 13 frame installation units. (RMUs: 1RMU = 1.75 inches =4.45 cm) Frame installation security requirement is as shown below: The frame or cabinet must meet the laws and regulations of all electrical and mechanical security in the installation country. The products installed on frame and the frame must connect grounded correctly and ensure the ground connection is established in the process of normal use. Shut off the power before building the power connection. It is suggested that the circuit breaker sho uld be installed on the top of each frame. The circuit breaker is designed as automatic operation electric switch to protect from circuit overload or short circuit caused damages. Its basic function is to detect fault conditions and immediately break the current by interrupting the continuity after a fault condition is detected. The 2 circuit breakers on the frame are for each case. 3.2 Frame Installations The frame installation is under the following steps: Step 1 Tighten all the frame installation trays with M6 screws to support the safety and ensure not over tightened. SAC700E Wireless Access Controller Installation Manual Frame Installations Figure 3-1 Frame Tray Installations Step 2 Install the hanggers onto the equipment. Figure 3-2 Left hanger installations SAC700E Wireless Access Controller Installation Manual Frame Installations Figure 3-3 Right hanger installations Step 3 Install the equipment onto the 19-inch frame and tighten it with 4 screws as shown below. Figure 3-4 Tighten the Nut SAC700E Wireless Access Controller Installation Manual 10 Frame Installations 3.3 Frame Ground Connections The equipment provides 2 M6 frame ground ends on the bottom of the frame as shown below. Figure 3-5 Frame Ground Ends Frame Ground Cable Dimensions: Cable Size: AWG6 End: 45° Tongue Connection End Frame Grounding Cable Figure 3-6 Frame Ground Cable Caution: Frame ground connection must accord with the applicable standard, the local requirements and the company's regular installation methods. All the ground connections must be anti-oxidation coated. SAC700E Wireless Access Controller Installation Manual 11 Installing and Removing Components Installing and Removing Components 4.1 Installing CM-2XGEF/CM-4GEF Extended Module (optional) The 2 installation methods are the same. Set CM-2XGEF module installation as an example to describe the installation steps of extended module. Step 1 Fix the module and the installation plate with 3 M2.5x6 screws. SAC700E Wireless Access Controller Installation Manual 12 Installing and Removing Components Remove one blank panel on the slot (set slot0 as an example) and push the extension plate into the slot as shown below. Step 2 Tighten the screw on the panel to complete the installation. 4.2 Installing/Removing SFP Module The equipment supports GE ports and 10 GE Ethernet ports on the small form factor pluggable (SFP) optical module. GE port can also support copper SFP modules as shown in the following figure: Figure 4-1 Fiber SFP Module SAC700E Wireless Access Controller Installation Manual 13 Installing and Removing Components Figure 4-2 Copper SFP Module Please notice the following when install/remove SFP modules: Slowly and carefully insert all modules to avoid damages. Slightly install/remove SFP Module to avoid serious module and card damages. Please unlock the locking mechanism before removing the SFP modules on card to avoid damages. Install SFP modules as the following steps: Step 1 Remove the black dust plug on the port(the dust plug can be used multiple times) Step 2 Insert the SFP module into the corresponding port and ensure using the locking mechanism. Remove SFP modules as the following steps: Step 1 Unlock the locking mechanism and pull the handle outward on the SFP module. Step 2 Pull the SFP card handle. Step 3 Install the dust plug into the empty interface. Caution: Please do not power off when installing/removing the SFP module. SAC700E Wireless Access Controller Installation Manual 14 Cable Connection Cable Connection 5.1 Cable Type There are three kinds of cables which need to be established during the equipment cable connection • • • Optical fiber Ethernet cable Console cable Optical Fiber The equipment GE ports and 10GE ports support SFP modules with LC connectors to establish fiber connections. Figure 5-1 Optical fiber Caution: Optical fiber will not be shipped with the equipment. Ethernet cable The equipment uses Category 5 (CAT 5) Ethernet cable with RJ 45 connectors to establish electrical Ethernet connections. SAC700E Wireless Access Controller Installation Manual 15 Cable Connection Figure 5-2 Ethernet cable Figure 5-3 RJ45 connector Table 5-1 RJ45 interface pin Pin 100Base-Tx 100Mbps Cat5 1000Base-Tx 1Gbps Cat5 TX+ BI DA+ TX- BI DA- RX+ BI DB+ Na BI DC+ Na BI DC- RX- BI DB- Na BI DD+ Na BI DD- RX=Receive Data TX=Transmit Data BI=BI directional data DA,DB,DC,DD=Data Pair A,B,C and D SAC700E Wireless Access Controller Installation Manual 16 Power On/Off Power On/Off 6.1 AC Power On/Off The SAC700E equipment uses ATX power switch. After the power cord connected properly, if the last power status is off, the equipment will power on directly and if the last power status is ATX On/Off, click on the ATX power switch to power on the equipment. After system boot starts, the fan will rotate faster than when it normally works, and all the LED lights on card and module will flash. After a period of time (up to one minute), the fan speed returns to normal working state, and the corresponding indicator shuts down. Warnings: Do not touch the power supply side when power on the system. Push ATX power switch to power off the equipment. The equipment will save the data and close the related process and then power off. 6.2 DC Power Switch The DC version equipment has 2 power switches: 1.AT switch; 2.ATX switch as shown below: Figure 6-1 Power switch The AT switch is on the DC power module. You can disable the DC power supply. For the use of ATX power swith, please refer to the descriptions in the previous chapter. SAC700E Wireless Access Controller Installation Manual 17 Specifications Specifications 7.1 Chasis Specifications Table 7-1 Chasis Specifications Item Description Type 1U Dimensions (W x D x H) 450 mm x 440 mm x 44 mm Interface 6 x RJ45 or 2 x SFP Weight (full loaded) 6.25 kg Power supply (AC) 100 V ~240 V AC，50 Hz~60 Hz DC power supply (optional) 36 V~72 V DC 7.2 Certifications The following table lists the certifications of the SAC700E. SAC700E Wireless Access Controller Installation Manual 18 Specifications Certification Description FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SAC700E Wireless Access Controller Installation Manual 19 Specifications Abbreviations AC Alternating Current ACL Access Control List AP Access Point CAPWAP Control And Provisioning of Wireless Access Points DHCP Dynamic Host Configuration Protocol MAC Multi-Access Computer NAT Network Address Translation RFC Request For Comments SSID Service Set Identifier VLAN Virtual Local Area Network Wired Equivalent Privacy WEP Wi-Fi Protected Access WPA SAC700E Wireless Access Controller Installation Manual 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : sk-wishzou Company : 西加云杉 Create Date : 2018:07:23 16:52:23+08:00 KSO Product Build Ver : 2052-10.1.0.5777 Modify Date : 2018:07:23 16:52:33+08:00 Proprietary Declaration : © 2014 西加云杉 Source Modified : D:20180723083036 Subject : 解决方案 Version Number : v1.0 Tag : JadeOS Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2018:07:23 16:52:33+08:00 Creator Tool : Acrobat PDFMaker 18 Word 版 Document ID : uuid:6e312666-3361-4275-bb44-d279ca23502e Instance ID : uuid:f28bffcb-95c1-49d4-aa4d-3ecae73799fd Format : application/pdf Description : 解决方案 Creator : sk-wishzou Producer : Adobe PDF Library 15.0 Tag : JadeOS Headline : 解僳挹桋 Page Layout : OneColumn Page Count : 22EXIF Metadata provided by EXIF.tools