SMC Networks SMCDW01Z Zigbee RF Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1352591
Application ID	Xm91jkYtz2CedoAkWOzL2A==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.8kB (234966 bits)
Date Submitted	2010-10-01 00:00:00
Date Available	2010-10-01 00:00:00
Creation Date	2010-09-23 16:49:31
Producing Software	AFPL Ghostscript 8.53
Document Lastmod	2010-09-23 16:49:31
Document Title	Users Manual
Document Creator	PDFCreator Version 0.9.1
Document Author:	btaylor

SMCDW01-Z Door-Window Sensor Quick Start Guide
Key Components
D. Find the supplied CR2 3-volt lithium battery.
E. Find the tamper switch.
F. While pressing and holding the tamper switch, insert the
battery into the SMCDW01-Z, with the positive (+) end
oriented towards the tamper switch. The front panel LED
goes ON.
G. After 1 second, release the tamper switch. The LED
blinks green.
H. Replace the SMCDW01-Z back plate.
I. Align the magnet next to the SMCDW01-Z. The
SMCDW01-Z can now be added to the SMA Gateway.
Note: Do not physically mount the SMCDW01-Z until you
add it to the SMA.
B. Wipe clean the surface where the SMCDW01-Z will be
mounted. Dust and particles can reduce the adhesion of
double-sided mounting tape you will use to mount the
SMCDW01-Z.
C. Place the main sensor unit and magnet unit in such a
way that when the door or window is closed, the man
sensor unit and magnet unit are within 2cm. from each
other. When you open the door or window, these two
units should separate in proximity.
Note: For optimal radio communications, position the
SMCDW01-Z vertically against the door/window frame.
Mounting the SMCDW01-Z
To mount the SMCDW01-Z to a wall, door, or window frame,
use double-sided mounting tape:
Insert the Battery
A. Find the locking mechanism on the bottom of the
A. Identify the locations on the SMCDW01-Z where doublesided mounting tape can be applied.
SMCDW01-Z.
B. Holding the SMCDW01-Z in one hand, carefully insert the
tip of a screwdriver into the locking mechanism.
C. Push lightly upwards from the back of the SMCDW01-Z
until the back plate separates from the sensor.
continued on next page
I/M SMCDW01-Z rev. 1.0
8/24/10
©
Copyright 2010 SMC Networks
All Rights Reserved
Page 1
SMCDW01-Z Door-Window Sensor Quick Start Guide
D. Do not mount the SMCDW01-Z directly on or near metal
framing or other large metallic objects, which can
weaken transmitted radio signal.
E. Place the SMCDW01-Z indoors and away from sources of
water/moisture and other extreme weather conditions.
F. Either screw the bidirectional mounting plate and
magnet unit into the wall, door or window frame. Use
the supplied screw anchors if attaching the SMCDW01-Z
to soft material, such as drywall.
F. Click Next. The Locating Sensors screen appears and the
system scans the premises for wireless sensors that can
be added, which must meet the following requirements:
- Defaulted
- Not currently paired with another SMA Gateway device
G. Follow the system prompts to complete the add process.
Note: If no available sensors are found or fewer are found
than expected:
- Touch Cancel Sensor/Zone Add to return to the
AND/OR
Peel and attach the double-sided mounting tape to the
back of the bidirectional mounting plate and magnet
unit to adhere to the wall, door, or window frame.
Technician Settings menu.
- Touch Back to return to Add a Sensor screen.
H. Check the signal strength between the SMCDW01-Z and
SMA Gateway (see “Test Signal Strength,” below.
I. Mount the sensor to a door or window.
Test Signal Strength
After adding the SMCDW01-Z to the SMA Gateway, test the
signal strength between the SMA Gateway and its added
sensors/security zones:
A. Perform steps A through D in step 2, “Add the SMCDW01Z to the SMA.”
B. When the Technician Settings menu appears, select
Sensors & Zones > Sensor Diagnostics.
C. When the currently installed sensors/security zones
appear, touch the zone you want to test for connectivity
and follow the instructions from the SMA Gateway.
The Sensor Diagnostic for  appears as
the system detects the current signal strength between the
selected sensor and the SMA Gateway.
If you encounter a problem, see Step 7, “Troubleshooting.”
Add the SMCDW01-Z to the SMA
A. From the Home screen, touch the Settings widget.
A. When the Keypad screen appears, touch the numbers to
enter your keypad code.
Note: The SMCDW01-Z uses one CR2, 3-volt lithium
battery. After you add it to the SMA system, it checks its
battery conditions automatically and reports the conditions
to the SMA Gateway. The SMA Gateway issues an alert if the
battery must be replaced.
B. When the Settings menu appears, use the keypad to
enter the Installer Code (this code is the same for all
SMA Gateways installed by your company).
4B
View Zone Event History
To view event history:
A. Touch the Security widget on the Home screen.
B. When the Dashboard appears, touch the History tab.
C. The Zone Event History shows the event history.
C. When the Technician keyboard pad appears, enter your
Technician ID and touch Done.
D. When the Technician Settings menu appears, select
Sensors & Zones > Add a Sensor/Zone.
E. When the Add a sensor screen appears, use the Arrow
buttons to select the number of sensors you want to add.
continued on next page
I/M SMCDW01-Z rev. 1.0
8/24/10
©
Copyright 2010 SMC Networks
All Rights Reserved
Page 2
SMCDW01-Z Door-Window Sensor Quick Start Guide
Disable Zones
The SMA system can bypass a zone, so the zone is not
monitored when the system is armed. This is useful when a
sensor is being repaired. You can only change the Bypass
state of a zone when the system is disarmed.
The system continues to log the activity of bypassed zones in
Icons
To delete a sensor from the SMA system:
A. Perform steps A through D in step 2, “Add the SMCDW01Z to the SMA.”
B. When the Technician Settings menu appears, select
Sensors & Zones > Delete a Sensor/Zone.
C. When the Premise Passphrase keyboard appears, retrieve
the Premise Passphrase for the current SMA Gateway
(the Premise Passphrase is unique to the current SMA
Gateway and was generated upon Activation):
Meaning
Open/Closed doorway
- Login to the Management Portal via the Internet.
- From the Dashboard, use the Start a Customer Search
Open/Closed window
tool to search for the current customer’s account.
- When the Customer Search Results screen appears,
find the customer in the listed query results and click
the customer’s Account Number. The Account Details
of the current customer appears.
the Event History (see “View Zone Event History,” above).
To bypass a zone:
A. With the system disarmed, touch the Security icon on
- Find the section TouchScreen Premise Pass Phrase.
- When the Premise Passphrase for the current SMA
the Home screen.
B. When the Dashboard screen appears, touch the Bypass
button for the zone to be bypassed. The Bypass button
of the zone changes to show it is bypassed.
When the system is disarmed, the Security Status header
notes that some of the zones have been bypassed.
D. Touch the zone you want to delete and follow the
instructions provided by the SMA Gateway to delete the
sensor and security zone from the current SMA system.
Deleting a Sensor
Deleting a sensor from the premises removes it from being
monitored by the customer’s SMA system. This is not the
same as disabling (bypassing) a sensor. You should delete a
sensor only:
Gateway appears, enter Premise Passphrase and click
Done. The currently installed sensors/security zones
appear.
If the sensor is being de-installed from the SMA premises
To reset the sensor to factory default settings by
deleting the sensor and re-adding it immediately.
I/M SMCDW01-Z rev. 1.0
8/24/10
Troubleshooting
5B
If you encounter a problem with the SMCDW01-Z:
Verify that a new battery has been properly installed
(see step 1, “Pre-installation Guidelines.”
Confirm that the SMCDW01-Z has been defaulted
©
Copyright 2010 SMC Networks
All Rights Reserved
Be sure the unlocated SMCDW01-Z is in working order if
only one multiple sensor failed.
Test signal strength between the sensor and SMA
Gateway (see Step 3, “Test the Signal Strength”).
Mount the SMCDW01-Z to a door or window.
Use the procedure in step 3 to check the signal strength
between the SMCDW01-Z and SMA Gateway again.
Congratulations! You have successfully installed
the SMCDW01-Z Door-Window Sensor.
Compliances
FCC Notice: This device has been designed, constructed, and tested with
for compliance with FCC Rules that regulate intentional and unintentional
radiators. As the user of this device, you are not permitted to make any
alterations or modifications to this equipment or to use it in any way that is
inconsistent with the information described in this quick-start guide,
without the express written permission of SMC Networks. Doing so will void
your warranty to operate this equipment.
This device complies with Part 15 of the FCC rules. Operation of this device
is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
interference that may cause undesired operation.
The SMCDW01-Z contains FCCID:JI5-SMCDW01Z and ICID:4137A-SMCDW01Z.
The “IC” designation preceding the radio certification number indicates
that this device complies with the Industry of Canada specifications.
ETL Notice: This device complies with all ETL and ETLC safety
requirements.
UL and ULC Notices: This device complies with UL Standard UL634 and ULC
Standard ULC C634.
Page 3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 3
Producer                        : AFPL Ghostscript 8.53
Create Date                     : 2010:09:23 16:49:31-04:00
Modify Date                     : 2010:09:23 16:49:31-04:00
Title                           : Users Manual
Creator                         : PDFCreator Version 0.9.1
Author                          : btaylor

EXIF Metadata provided by EXIF.tools