SMK FC012 Half-Mini Card size TransferJet module User Manual UserManual
SMK Corporation Half-Mini Card size TransferJet module UserManual
SMK >
Contents
- 1. InstallationManual
- 2. UserManual
UserManual
859 FC
User Manual
5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan
Product Name: Half-Mini Card size TransferJet module
Model number: TJ101
GENERAL
The TJ101 is a Close Proximity Wireless TransferJet*1 module, implemented in a PCI
Express*2 Half-Mini Card format. The TJ101 interfaces to a host PC by directly inserting
the card into a PCI Express*2 Mini slot. Wireless connectivity requires an external
TransferJet*1 coupler connected by an RF coax cable to the TJ101 module.
*1 TransferJet is a trademark of Sony Corporation.
*2 PCI Express is a trademark of the PCI Special Interest Group (PCI-SIG).
Integration to the end product
The SMK Transceiver Module, model TJ101 has to be installed and used in accordance
with the technical description/installation instructions provided by the manufacturer.
The system may only be implemented in the configuration that was authorized. Note that
any changes or modifications to this equipment not expressly approved by the
manufacturer could void the user’s authority to operate this equipment.
859 FC
User Manual
5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan
Regulatory Information
Manual Information
The following text shall be placed on the manual of end product.
Common in USA-Federal Communications Commission (FCC) and Industrial
Canada (IC RSS-Gen and RSS-102)
USA-Federal Communications Commission (FCC) Only
859 FC
User Manual
5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan
Industrial Canada (IC RSS-Gen and ICES-003) Only
・RSS-Gen
（None）
・ICES003
※it is the responsibility of the manufacturer or importer to determine whether the notice should appear in one or
the other, or both, of the official languages, based upon the intended market, company marketing policies, and
any other applicable provincial or federal regulations.
Labelling
SMK Transceiver module TJ101 labelled as below.
FCC ID:GT3FC012
IC:3683A-FC012
The proposed FCC ID and IC label format is to be placed on the module. If FCC ID and
IC is not visible when the module is installed into the system, The following sentences
shall be placed on the outside of final host system.
“Contains Transmitter Module FCC ID: GT3FC012, IC: 3683A-FC012”
or
“Contains FCC ID: GT3FC012, IC: 3683A-FC012”
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.