User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3002810 |
| Application ID | UefkVfTD2LwmlAAjTz553A== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 69.78kB (872298 bits) |
| Date Submitted | 2016-05-24 00:00:00 |
| Date Available | 2016-11-20 00:00:00 |
| Creation Date | 2016-04-22 05:25:49 |
| Producing Software | GPL Ghostscript 8.71 |
| Document Lastmod | 2016-04-22 05:25:49 |
| Document Title | Microsoft Word - ESL-HW-TAG-DTS_ST-GM7400N_1.0_160419.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | B1E8C1D8BFB5 |
S-TAG Datasheet(ST-GM7400N)
Preliminary
PRODUCT DATASHEET
Company Name
MODEL
ST-GM7400N
CUSTOMER
APPROVAL
□ CUSTOMER REMARK :
Issued By
Checked By
Approved By
JY Kim
JS Seo
JG Ryu
Solu-M
150, Maeyoung-ro(Maetan-Dong), Youngtong-Gu, Suwon, Gyunggi-Do, Korea
Tel : 82-31-210-3494
REV 1.0
Solu-M Proprietary and Confidential
1/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
S-TAG Datasheet
S-Label (Electronic Label System)
REV 1.0
Solu-M
2016-04-19
Summary
This datasheet presents the general performance and specifications of S-Tag for S-Label ESL (Electronic
Shelf Label) system, which is based on IEEE 802.15.4.
© 2015 Solu-M. All rights reserved
The names of actual companies and products mentioned herein
may be the trademarks of their respective owners.
No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means
without the express written consent of Solu-M.
This document is subject to change without notice.
REV 1.0
Solu-M Proprietary and Confidential
2/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
Table of Contents
GENERAL DESCRIPTION ..................................................................................................... 5
1.1
FEATURES ......................................................................................................................... 6
1.2
TYPICAL APPLICATIONS ......................................................................................................... 6
SPECIFICATION .................................................................................................................. 7
2.1
PRODUCT SPECIFICATION ....................................................................................................... 7
2.2
RADIO (RF) SPECIFICATION (TBD) .......................................................................................... 7
2.3
NFC SPECIFICATION .......................................................................................................... 8
2.4
MECHANICAL DRAWING ....................................................................................................... 8
2.5
LABELS ............................................................................................................................. 9
OPERATION TEST .............................................................................................................. 11
ESL OPERATION BY DISPLAY ........................................................................................... 12
PACKAGE ........................................................................................................................... 15
CAUTIONS FOR TREATMENT............................................................................................. 16
6.1
USAGE ENVIRONMENT .......................................................................................................... 16
6.2
STORAGE AND USE .............................................................................................................. 16
6.3
BATTERY REPLACEMENT........................................................................................................ 17
REV 1.0
Solu-M Proprietary and Confidential
3/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
Document History
Rev.
Date
1.0
19 Apr 2016
REV 1.0
Revision history
Initial release
Solu-M Proprietary and Confidential
Page
4/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
1 General Description
This S-Tag product is a part of Solu-M S-Label (Electronic Shelf Label) system as well as S-Label Gateway
(S-Gate), Remote controller (S-RC). S-Label system make up a system that electronically displays price
and other product information on S-Tags, which has been traditionally printed or written on paper in
places like retail markets.
S-Tag receives product price/information updates from S-Gate and updates or changes its display of price
and other information.
S-Tag is the product based on IEEE standard 802.15.4 for low power wireless communication
applications. S-Tag consists of RF transceiver, RF circuitry and 8051-compatible MCU offering IEEE
802.15.4 based network protocol and MAC protocol and other peripheral devices.
Figure 1. S-Label System
REV 1.0
Solu-M Proprietary and Confidential
5/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
1.1 Features
Display : E-Paper Display (EPD) (active type) (163.2 X 97.92 mm)
Communication : Wireless communication based on IEEE 802.15.4
Operating on 2.4GHz Unlicensed ISM band for ZigBee
Low Power Consumption
External Wakeup : RF Wakeup (using ISM Band(2.4GHz))
Outline Dimension : 181 mm X 123 mm X 15.5 mm
Case Color : White
Working condition: Indoor where wireless communication is available.
1.2 Typical Applications
Retail industry with electronic displays, platforms, solutions and services.
Intelligently communicating, managing, and optimizing price and product information.
Front
Rear
Figure 2. Appearance
REV 1.0
Solu-M Proprietary and Confidential
6/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
2 Specification
2.1 Product Specification
Item
Description
Size
181 mm X 123 mm X 15.5 mm
Battery
CR2450 Lithium Battery (3V)
2.5 ~ 3.3Vdc(condition : In active status)
Display
Electrical paper display ( active type ) (163.2 X 97.92 mm)
Housing Color
White
Information display
Price, Unit, Symbol etc.
Communication
Wireless communication based on IEEE 802.15.4
Communication Distance
Radius 20m (Line of Sight)
Operation Temp.
Storage Temp.
Etc.
℃ (@35~70% RH)
-20 ~ 60 ℃
0 ~ 40
No additional anti-theft locking structure : Rail Mounted only
2.2 Radio (RF)1 Specification
SPEC
Item
Parameter
Unit
Transmit Power
TX
Typ
Max
-4
dBm
10
30
When measured for 100 chips
70
mA
Total current at max Tx Power
dBm
PER < 1%
Error Vector Magnitude
Tx Current
RX
Receiver Sensitivity
Condition
Min
-90
Test Channel : 2480MHz
REV 1.0
Solu-M Proprietary and Confidential
7/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
2.3 NFC Specification
spec.
Items
Parameter
NFC
NFC
Units
Condition
mm
PCB status
mm
Final Assy status
Min
Typ
Max
Read/Write Distance
40
Read/Write Distance
30
2.4 Mechanical Drawing
Figure 3. Mechanical Dimension
REV 1.0
Solu-M Proprietary and Confidential
8/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
2.5 Labels
2.5.1 Code Information
Serial 1, 2 Code Value
15
2JW
①
②
③
④
⑤
⑥
⑦
① Year : Last two digits of manufacturing year.
(00 ~ 99, Example : 2015 is '15')
② Month : Manufacturing month
(1 ~ 9, X(10), Y(11), Z(12))
③ Date : Manufacturing date
(1 ~ 9, A(10) ~ V(31))
④ Vendor : Manufacturing vendor
(D : Dongguan Solu-M, S : SEMTHAI, T : TSEM, etc)
⑤ Line number : Manufacturing Line number
('A', 'B', 'C', etc)
⑥ Revision : Product revision number
(A : First, B : Second, C : Third, etc.)
⑦ ZigBee IC Lot Number : Last 3 characters of Lot Number
(Example : YME06862JW is ‘2JW’)
REV 1.0
Solu-M Proprietary and Confidential
9/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
2.5.2 Mac Label Drawings
Figure 2. Mac Labels
Product information is indicated in a printed sticker label. The information consists of MODEL (model
name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), certification mark, and
Manufacture.
1) FCC ID : E2X-ST-GM7400N
2) Model Name : ST-GM7400N
3) MFD : (Month).(Date).(Year)
ex) APR.19.2016
4) S/N : Daily Production quantity (5 digits) & Serial Number Information (hexadecimal 10 digits)
5) MAC : barcode & barcode number(hexadecimal 16 digits)
- 6 digits (1st ~ 6th) : XXXXXX (Company code)
- 6 digits (7th ~ 12th) : XXXXXX (Increasing number : 000000 ~ FFFFFF)
- 4 digits (13th ~ 16th) : 705X
REV 1.0
Solu-M Proprietary and Confidential
10/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
3 Operation Test
Equipment : Gateway(S-Gate), R/C, Jig for power supply
Target DUT : EPD TAG
Figure 3. Operation Test
Test Scenario
①
②
③
④
⑤
⑥
⑦
Install Tag on Jig
Ready to Gateway(S-Gate) and R/C
Tag start to communicate with Gateway
Tag display the image received from Gateway and enter to sleep mode.
(Display pattern : MAC
→ SCAN Icon → White)
wake up Tag with R/C
Check Tag (Display pattern : SCAN Icon
→ White)
Get off Tag from Jig.
Criterion (Below both two conditions should be all satisfied)
①
②
Good : You can see a White display.
Compare MAC address with that of label attached to Side or Back plane.
* gateway lost / not found : You can see a diamond(
REV 1.0
◆) in the upper right corner.
Solu-M Proprietary and Confidential
11/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
4 ESL Operation by display
It will be updated before 2nd release. Below is just a sample.
Display
State
User Action
STATE: 1
None
Initial display when shipped
from the manufacturer
(Tag version, MAC address).
STATE: 1
To assign a tag using a PDA
No change.
STATE 1 2
A tag woken up by an RC
Searching for GWs
(Tag version, MAC address
and triangle).
REV 1.0
Solu-M Proprietary and Confidential
12/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
STATE 2 4
None
A tag is connected to a GW
and received price
(Price)
STATE 2 3
A tag failed to locate a GW
(Tag version, MAC address).
STATE 4 5
Woken up by an RC
When a tag is connected to a
GW, and woken up by an RC,
Next page display predefined.
Display is end, tag wait 10
second wakeup signal by RC.
When signal is detected in
this time, immediately return
first Page and Send Price
Request to GW. No signal in
this time, after 10 second
return first Page and Same
Operation.
REV 1.0
Solu-M Proprietary and Confidential
13/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
STATE 4 6
None
Connection to a GW is lost
(price and Rectangle on
upper right corner)
STATE 6 6
Woken up by an RC
When connection is lost and
woken up by an RC
(blinks with the price and
Rectangle)
Starts to search GWs.
STATE 4 1
Initial display
To clear an assigned tag
using a PDA
(Tag version, MAC address)
REV 1.0
Solu-M Proprietary and Confidential
14/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
5 Package
REV 1.0
Solu-M Proprietary and Confidential
15/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
6 Cautions for Treatment
Provisions should be made to protect against any damage to the product caused by improper handling.
It is highly recommended that the product should be installed within 3 months from the date of arrival in
the logistics hub. Recommended storage condition is in -20 ~ 60 Celsius degree, 35-70% RH environment.
This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device,
therefore, may not be used for applications where safety of human lives is concerned.
6.1 Usage Environment
Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances.
Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this
RF device can affect other electronic devices and appliances.
If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.
6.2 Storage and Use
Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device
itself.
Do not place or store the product on a sloped surface. The product may slide and fall off the
surface and damaged.
℃ to +40℃. Parts and circuits may be damaged if
Use the product in temperatures ranging from 0
used or stored under temperature extremes.
The display panel needs extra care when handling.
- Do not apply any impacts on outside since e-Paper display is fragile.
- Continuous exposure to excessive moisture (over 70% RH) or UV makes display lifetime
shortened.
- Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.
Avoid areas with strong magnetism or subject to magnetism. Contact between the device and a
magnetic object can lead to malfunctions.
Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in
the vicinity of highly pressurized containers.
REV 1.0
Solu-M Proprietary and Confidential
16/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
External impact to the product, such as from being dropped, can damage the product or battery
casing can be separated.
Twisting and bending the product can damage the exterior casing and the internal components.
If this product operates abnormally in eliminating battery vinyl or replacing battery, you should
discharge it by contacting battery terminal (+) and (-).
This product uses 2.4GHz frequency band for wireless communication network. Radio
communications can be limited or affected by other applications which share same frequency band,
such as Wi-Fi, Bluetooth, ZigBee, etc.
Frequent communications, updates and screen renewals may reduce battery life time.
6.3 Battery Replacement
6.3.1 Audience
Authorized persons with the following knowledge are allowed to replace the battery.
Battery
Electronic assemblies like circuit board
Compliance of the instruction
※
Note : If not authorized person, it will not give any warranty.
6.3.2 Instructions
Risk of explosion through incorrect battery replacement.
Keep attention that your hands are dry before you start with replacement.
When replace the battery, please contact right person and get a instructions.
※
Note : Battery rarely has a little stain or leak.
6.3.3 Steps
1. Open the battery cover.
2. Take out the batteries.
3. Put in the new batteries.
4. Check the batteries direction.
5. Put the battery cover.
REV 1.0
Solu-M Proprietary and Confidential
17/13
S-TAG Datasheet(ST-GM7400N)
Preliminary
WARNING
: This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received,
NOTE
Including interference that may cause undesired operation.
: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications, However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
This device complies with FCC radiation exposure limits for an uncontrolled
environment. Avoid operating this device at a distance less than 20cm from the user
REV 1.0
Solu-M Proprietary and Confidential
18/13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 18 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : ca4b58ff-0a9d-11e6-0000-55b27e7f2ed9 Producer : GPL Ghostscript 8.71 Modify Date : 2016:04:22 05:25:49+01:00 Create Date : 2016:04:22 05:25:49+01:00 Creator Tool : PScript5.dll Version 5.2.2 Document ID : ca4b58ff-0a9d-11e6-0000-55b27e7f2ed9 Format : application/pdf Title : Microsoft Word - ESL-HW-TAG-DTS_ST-GM7400N_1.0_160419.doc Creator :EXIF Metadata provided by EXIF.toolsAuthor :