SOYAL TECHNOLOGY AR-331 Access Controller User Manual
SOYAL TECHNOLOGY CO., LTD. Access Controller User Manual
User_Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3517478 |
| Application ID | wrDltvWPp6qCn3NCqRzIGg== |
| Document Description | User_Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 69.13kB (864103 bits) |
| Date Submitted | 2017-08-18 00:00:00 |
| Date Available | 2017-08-18 00:00:00 |
| Creation Date | 2017-02-22 15:29:47 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2017-08-14 19:48:47 |
| Document Title | User_Manual |
| Document Creator | Adobe Illustrator CC 2015 (Windows) |
SOYAL ® AR-331E/F V170222 ACCESS CONTROL SYSTEM 產 品 內 容/基本指令 AR-331E/F 指示燈號 / Indicators Left LED H/E/EF Descrption/說明 Right LED Blue Arming / Blue LED Input (Active High) 警戒/藍LED輸入控制 Green Yellow Yellow LED Input (Active High) 警戒/黃LED輸入控制 Red //Basic Commands H/E/EF/U/K Descrption/說明 指令 / Commands Power-on/Stand-by /OK 電源/操作正確/待機 123456 (Input 6-digit password twice) 操作錯誤/發警報 進入編輯模式 654321654321 09 Error/Alarm 功能 (E/EF series) 00 NNN MMM AAA (Node ID*Main Door NO.*WG Door NO.) 00 Exit program mode 離開編輯模式 同時進入警戒模式 Exit program mode and enter arming mode 設定控制器站號 Node ID setting (站號*E/EF門號*WG門號) 設定控制器站號 NNN 門禁控制器接於716E底下 (Node ID) 00 NNN VVV 007 nnn (716E Node ID*Virtual Dr NO..*Reader Dr NO.) 02 (U=0=Main; U=1=WG) 02 007 03 015 04 While power on the device,hands off the touch panel for 10 sec. to make sure a successful activation. Frame Rubber (By order) 10 11 Screws Rubber (By order) SSSSS EEEEE (For example 00001 * 00005) 設定開門繼電器動作時間 Door Relay Time setting 預設: 007=7秒 (輸入601~609=0.1~0.9秒) (Default Value: 007=7 sec.) Alarm Relay Time setting 設定H系列控制器模式 Control mode setting 將使用者位置設為無效 Suspend / Delete User 暫停使用者位置 (開始位置 * 結束位置) 9 刪除使用者位置 SSSSS 恢復所暫停使用者位置 EEEEE (Starting User Addr. * Ending User Addr.) (601~609=0.1~0.9 sec.) 預設: 015=15秒 SSSSS 9 EEEEE (Starting User Addr. 9 Ending User Addr.) (開始位置 9 結束位置) (Default Value: 015=15 sec.) (For H series only) Suspend user address (Able to recover by command 11) 9 Delete user address Recover Tag User (開始位置 * 結束位置) 12 SSSSS 1111 設定各使用者的進出密碼 (Card or PIN: User Addr. * 4-digit password) (進出模式:讀卡或密碼) 13 SSSSS 2222 設定各使用者的進出密碼 Set up User PIN (Card or PIN range: 1111~9999) Set up User PIN (Card + PIN: User Addr. * 4-digit password) (進出模式:讀卡加密碼) (Card + PIN range: 1111~9999) 15 設定M4/M8的求援密碼； 或M6的共同密碼(通行模 M4/M8:Duress code setting M6:Public PIN setting 1234 (Default Value: 1234, 0000=Disable) 17 4321 (Default Value: 4321, 0000=Disable) Put on/Take off together 19 Peel off frame rubber (by order) Node ID setting (Connected to the PC directly without 716E) (N=4/6/8=Mode 4/6/8) (Starting User Addr. * Ending User Addr.) 10 (Connected to 716E) 直接與電腦連線<不經由716E> 設定警報繼電器動作時間 (H series) 通電時人體離開面板10秒以確保案件啟動。 設定控制器站號 Node ID setting (E/EF series) (H series) 離開編輯模式 (H series) 最佳感應區。 Best Reading Area 更改編輯密碼 Function Enter Programming Mode Enter Programming Mode UUUUU QQQQQ (User Address * Card Q’ty) (H series M6 only) (N=0=Delete/ N=1=Add) 式為讀卡或密碼) 設定M4/M8的求援密碼； 或M6的共同密碼(通行模 式為讀卡加密碼) 以感應方式設定卡片 for access mode "Card or PIN" M4/M8:Arming PWD setting M6:Public PIN setting for access mode "Card & PIN" Add card by presenting (U:使用者位置*Q=00001 以每次感應1張方式加卡) (Q’ty=00001 =Continuously inducting) 感應方式刪除/增加卡片 (N=0=刪除 / N=1=增加) Add/Delete tag by presenting 22 29 29 清除所有卡片資料 Delete all tags 29 20 H系列清除所有卡機設定 Delete all setting of H 29 299 E/EF系列清除所有卡機設定 Delete all setting of E/EF Peel off screw rubber (by order) SOYAL ® AR-331E/F ACCESS CONTROL SYSTEM 產 品 內 容/基本指令 AR-331E/F //Add Card Commands //新增卡片設定說明 Enter Programming Mode Press 123456 進入編輯模式 按 //指 紋 建 檔 /刪 除 123456 更改編輯密碼 (請連續輸入新6位數密碼2次) Change program code Input 6-digit PWD twice 按 09 Press 09 654321654321 UUUUU (F=1/2/3 建立指紋枚數; UUUUU:要建立的使用者位置) 登入操作方式(請依提示音操作)： (請記錄各使用者位置及其卡號) 用戶位址範圍: 00000~03000 M4/M8模式 按 19 00001 00001 M6模式 ( 17*0000#要設定) 按 22 (Please list down each User Address and its Card ID) User Range: 00000~03000 00001 00001 M4/M8 Mode Press 19 M6 Mode (Must set up 17*0000#) Press 22 Attach/Present Card One by One 卡片依序一張張在卡機上感應 Add PIN User PIN=0000 (Disable) M4/M8 Mode (4/8 beepswhile engtering progrm mode) Press 12 00001 1234 M6 Mode Press 15 1234 使用密碼進出(讀卡或密碼) PIN=0000 為停用密碼 M4/M8模式(依進入編輯模式時聲響數， 判模式，例:4聲為M4，8聲為M8) 1234 1234 先放手指 建立1枚指紋 Add Card User 以感應方式設定卡片 按 12 00001 M6模式 按 15 654321654321 登入： 進入編輯模式 嗶 (聽到嗶後, 高音長嗶(成功建檔) 移開手指, 同手指重複放置3次) 建立2/3枚指紋 重複以上步驟 刪除單筆： 進入編輯模式 UUUUU 刪除全部： 進入編輯模式 99999 //指 紋 或 卡 片 管 制 型態設定 進入編輯模式 4 0 SSSSS EEEEE (SSSSS=開始使用者位置; EEEEE=結果使用者位置) 使用讀卡加密碼進出 Add Card+PIN User PIN=0000 (Disable) 組合式指令設定： PIN=0000 為停用密碼 M4/M8 模式 按 13 00001 M4/M8 Mode Press 13 00001 4321 M6 Mode (Must set up 17*0000#) 4321 Press 17 方式一：通行方式先指紋後卡片 4321 M6模式 ( 17*0000#要設定) 4321 按 17 設定開門繼電器時間 按 02 設定開門等待時間 按 18 007 015 Set up Door Relay Time Press 02 007 Set up Door Close Time Press 18 015 Enter Programming Mode Press 123456 進入編輯模式 按 123456 更改編輯密碼 Change program code Input 6-digit PWD twice Press 09 移除卡片 Delete Card User User Range: 00000 ~ 03000 用戶位址範圍: 00000~03000 M4/M8模式 & M6模式 按 10 00001 00005 M4/M8 Mode Press 10 Press 10 M6 Mode 654321654321 00001 00001 00005 00005 判模式，例:4聲為M4，8聲為M8) 1234 1234 PIN=0000 為停用密碼 00001 4321 M4/M8 模式 按 13 M6模式 ( 17*0000#要設定) 按 17 4321 00001 M4/M8 Mode Press 13 M6 Mode (Must set up 17*0000#) 4321 Press 17 設定開門繼電器時間 按 02 007 Set up Door Relay Time Press 02 007 015 Set up Door Close Time Press 18 015 Exit program mode Press EEEEE EEEEE (F=1/2/3, Number of fingerprin per user; UUUUU=user address) How to add a finger data: Put 1st Finger Adding 1 Fingerprint unit. Each finger shall collect for 3 times) Long Bi(OK) Adding 2nd/3rd Fingerprint Repeat 1st finger process (UUUUU=User address) Access programming mode Add Card+PIN User PIN=0000 (Disable) 使用讀卡加密碼進出 SSSSS SSSSS 99999 M4/M8 Mode (4/8 beepswhile engtering progrm mode) Press 12 00001 1234 M6 Mode Press 15 1234 M4/M8模式(依進入編輯模式時聲響數， 按 Deleting All Add PIN User PIN=0000 (Disable) PIN=0000 為停用密碼 離開編輯模式 Access programming mode 3 9 UUUUU Place your finger on the sensor UUUUU (Delete all cards and parameters) Press 29 20 使用密碼進出(讀卡或密碼) 按 18 Access programming mode 29 Reset to Factory Default Value 恢復出廠預設值 設定開門等待時間 Deleting 29 SSSSS EEEEE SSSSS SSSSS Bi (After Bi sound, please remove the the finger from Delete All User Cards Press 29 (清除所有卡片及參數資料) 按 29 20 按 12 00001 M6模式 按 15 Adding (請連續輸入新6位數密碼2次) 654321654321 按 09 移除所有卡片資料 按 29 //Adding / Deleting Fingerprint //Delete Card Commands //移除卡片設定說明 方式二：通行方式僅指紋/僅卡片 Exit program mode Press 離開編輯模式 按 4321 //Enable/Disable Skip Finger/Tag Access programming mode SSSSS EEEEE (SSSSS=Starting user address; EEEEE=Ending User Address) Pair Command Setting： Way1 Access by fingerprint first and then tag/card 4 0 EEEEE SSSSS 4 0 EEEEE SSSSS Way2 Access just by fingerprint or just by tag/card 4 0 EEEEE SSSSS 4 0 EEEEE SSSSS SOYAL ® ACCESS CONTROL SYSTEM 產 品 內 容/排線說明 Battery Only AR-331E/F AR-331E/F SOYAL ® AR-331E/F ACCESS CONTROL SYSTEM NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:02:22 15:29:47+09:00 Creator : Adobe Illustrator CC 2015 (Windows) Modify Date : 2017:08:14 19:48:47+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Instance ID : uuid:1e6c624b-b8b1-47cf-813b-b6463614f5d6 Document ID : xmp.did:a8d7f7de-b6db-cb4c-9716-910294159cd7 Original Document ID : adobe:docid:indd:1a4744ff-aeec-11e1-9dfe-8212a9909d6b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:da313d02-80a3-db4a-890d-6fb558c929f7 Derived From Document ID : xmp.did:da313d02-80a3-db4a-890d-6fb558c929f7 Derived From Original Document ID: adobe:docid:indd:1a4744ff-aeec-11e1-9dfe-8212a9909d6b Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:6123BFD610DAE211A2FA9815C8ADB742, xmp.iid:6223BFD610DAE211A2FA9815C8ADB742, xmp.iid:132253E838EDE211907EFD1598611040, xmp.iid:583A64B839EDE211907EFD1598611040, xmp.iid:da313d02-80a3-db4a-890d-6fb558c929f7, xmp.iid:a8d7f7de-b6db-cb4c-9716-910294159cd7 History When : 2013:06:21 09:21:03+08:00, 2013:06:21 09:21:03+08:00, 2013:07:15 18:25:44+08:00, 2013:07:15 18:31:33+08:00, 2017:02:22 15:03:05+08:00, 2017:02:22 15:29:40+08:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe Illustrator CC 2015 (Windows), Adobe Illustrator CC 2015 (Windows) History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /, / Metadata Date : 2017:08:14 19:48:47+08:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 14052 bytes, use -b option to extract), (Binary data 11740 bytes, use -b option to extract) Thumbnail Width : 256 Thumbnail Height : 156 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13823 bytes, use -b option to extract) Doc Change Count : 42 Format : application/pdf Title : 331說明書 Producer : Adobe PDF library 15.00 Trapped : False N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 215.999843 Max Page Size H : 303.000131 Max Page Size Unit : Millimeters Font Name : MicrogrammaD-MediExte, Arial-Black, ArialNarrow, Arial-BlackItalic, Arial-BoldMT, ArialMT, Square721BT-Roman, AdobeMingStd-Light, DFYuanStd-W3, DFHeiStd-W7, DFYuanStd-W7 Font Family : MicrogrammaDMedExt, Arial, Arial, Arial Black, Arial, Arial, Square721 BT, Adobe 明體 Std, 華康圓體 Std, 華康黑體 Std, 華康圓體 Std Font Face : Regular, Black, Narrow, Italic, Bold, Regular, Roman, L, W3, W7, W7 Font Type : TrueType, Open Type, Open Type, TrueType, Open Type, Open Type, TrueType, Open Type, Open Type, Open Type, Open Type Font Version : Version 001.005, Version 5.22, Version 2.37, Version 1.00, Version 6.90, Version 6.90, Version 2.001 mfgpctt 4.4, Version 6.008;PS 6.001;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.00, Aotf2004.12.15, Version 2.00, Aotf2004.12.15, Version 2.00, Aotf2004.12.15 Font Composite : False, False, False, False, False, False, False, False, False, False, False Font File Name : microgme_1.ttf, ariblk.ttf, ARIALN_1.TTF, Arial Black Italic_0.TTF, arialbd.ttf, arial.ttf, Square721_BT_Roman_0.ttf, AdobeMingStd-Light.otf, dfyuanstd-w3_0.otf, dfheistd-w7_1.otf, dfyuanstd-w7_0.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 預設色票群組 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE P 50-8 C Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 99.000001 Swatch Groups Colorants Yellow : 91.000003 Swatch Groups Colorants Black : 47.000000 Page Count : 4EXIF Metadata provided by EXIF.tools